Yeah, Finally someone is showing how to make a Throttle
@CaptainBobSim
4 жыл бұрын
Haha, I know, right!
@ldo96
4 жыл бұрын
Your process and explanation is simplistic and educational. Your subscribers are getting an education while watching you and your videos mature and improve. Thank your dad for us for supporting you in your hobby and KZitem channel. God Bless
@CaptainBobSim
4 жыл бұрын
Thank you so much! I'll tell my dad thanks, Have a nice day!
@noahzia5059
4 жыл бұрын
Your ingenuity is literally just what I needed in my flight simming life.
@CaptainBobSim
4 жыл бұрын
Thank you Noah! I am really glad these help :) Clear skies! - Captain Bob
@joscyriacv2
3 жыл бұрын
So I've been working on building a yoke with Arduino. I had seen this video few weeks ago and had it in my mind. But later i forgot about this and started tinkering with Arduino and mobiflight and fsuipc and what not. Nothing worked out and then suddenly i remembered. The original idea for everything i had came from Captain Bob videos. I came back to this video and voila! I got the X axis to work like magic when i used the code here. The codes i was using earlier were not giving me his results. Thank you Captain Bob.
@CaptainBobSim
3 жыл бұрын
That's so awesome to hear!!! Amstudio's code works wonders!!
@peregrinussolutionsllc6010
3 жыл бұрын
Just discovered your channel with this video Captain Bob and you rock! Thank you for creating and sharing such a well done and in depth video :-D Looking forward toy checking out your other content now that we're subscribed. I'm going to make our sim match our Stinson 108 for increased realism during inclement weather :-)
@CaptainBobSim
3 жыл бұрын
Thank you for your kind words! That will be awesome, make sure to share your progress :)
@peregrinussolutionsllc6010
3 жыл бұрын
@@CaptainBobSim Thanks Captain Bob, will do! :-) Best regards, Christian @ peregrinusS.com
@Tutor1503
3 жыл бұрын
I FUCKIKG LOOVE HIS INTRO!!! AS a 21 year old i can say its the coolest dude i have seen in a while... maybe its because of quarantine but omg he seems so fun lol
@Tyler-nd3qg
4 жыл бұрын
I really love your tutorials and im going to use them for my cessna citation cockpit!
@CaptainBobSim
4 жыл бұрын
I'm glad these help, That would be super cool, you should send me pictures to CaptainBobSim@gmail.com I would love to see it
@devansh8846
3 жыл бұрын
Captain Engineer👌🏻
@ALPHARICCO875
3 жыл бұрын
Congratulations and thank you to share our passion of flight
@CaptainBobSim
3 жыл бұрын
Thank you too! Happy Simming!
@charlielima
3 жыл бұрын
Thank you - What is the dia. of the wooden poles you used? I'm hoping to fine some metal ones (EDIT, I re watched and you did say it's a 1/4th inch dowel)
@Chuckles-mz3oj
3 жыл бұрын
Did the metal poles work?
@mikemaynard1965
2 жыл бұрын
Nice Cpt. Bob, thank you!
@CaptainBobSim
2 жыл бұрын
You're welcome Mike!
@noneNone-mw1px
4 жыл бұрын
Capt. You are the man as always.
@CaptainBobSim
4 жыл бұрын
Thanks :)
@kiancabarle123
4 жыл бұрын
Looking forward to make this. Great design :)
@CaptainBobSim
4 жыл бұрын
That's awesome! You'll have to share your progress!
@kiancabarle123
4 жыл бұрын
@@CaptainBobSim im still gonna order some parts. Probbly around 2 months hehe
@kiancabarle123
4 жыл бұрын
@@CaptainBobSim also, I saw you comment on a cessna yoke tutorial, how is it going? Because im also planning to build one of those.
@CaptainBobSim
4 жыл бұрын
@@kiancabarle123 It's going kind of slow. I have some design flaws I want to fix, because I don't want to advertise how to make a broken yoke :)
@CaptainBobSim
4 жыл бұрын
@@kiancabarle123 I can relate. I'm going to get my stepper motors I ordered from March!
@dhanu3559
4 жыл бұрын
Thankyou very much 🙏😎 captain bob
@CaptainBobSim
4 жыл бұрын
You are welcome! I'm glad you enjoyed it!
@constantine6313
4 жыл бұрын
Hi, Great video and trying to build my own since I cannot afford the ones out there. If I pay you, could you please 3D print the knobs and the potentiometer holder?
@CaptainBobSim
4 жыл бұрын
I think I could, Email me for more details: CaptainBobSim@gmail.com
@SuperMJS123
4 жыл бұрын
Cool
@CaptainBobSim
4 жыл бұрын
Thank you!
@henkspenk74
4 жыл бұрын
Hi Bob, love your videos. I can´t find your link with code and the potmeters you used. Thanks, Henk from the Netherlands
@CaptainBobSim
4 жыл бұрын
Hello, Sorry 'bout that, all of the descriptions got deleted, and I haven't rewritten them yet. The Code is here: github.com/AM-STUDIO/USB-5-AXIS-CONTROLLER The print is here: www.thingiverse.com/thing:4021103 and the potentiometers: rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F2x-BOURNS-10K-Ohm-Slide-Potentiometer-100mm-Travel-Single-Linear-Taper-Carbon%2F401467538363%3Fhash%3Ditem5d79547bbb%3Ag%3ANj4AAOSwG1NahOqL&campid=5338464143&toolid=20008
@simhoper8953
4 жыл бұрын
Dude! Iam worried if NASA would hire you in future and we alllose all the videos you make!
@CaptainBobSim
4 жыл бұрын
Lol I don't think you'll loose any videos, Just look at Mark Rober!
@jamesbrusseau9194
3 жыл бұрын
Where did you get the friction locks that you show after you show how to drill the holes
@CaptainBobSim
3 жыл бұрын
www.thingiverse.com/thing:2806186 and www.thingiverse.com/thing:2805734 scale these up so that the hex nut's width is 1.5"
@jamesbrusseau9194
3 жыл бұрын
@@CaptainBobSim I really think you can make a killing selling this setup. If you made the whole thing assembled so I had to do was plug it in to my Arduino for in my case I'm plugging it directly into my Saitek yoke
@hashimiqbal6822
4 жыл бұрын
What petiometer could I use with a leobdonar board to make this?
@CaptainBobSim
4 жыл бұрын
This is the one I used: www.amazon.com/BOURNS-Potentiometer-Travel-Single-Linear/dp/B079ZQ6T13/ref=sr_1_1?keywords=10k+slide+potentiometer+100mm&qid=1583678535&sr=8-1 You could also use these: www.amazon.com/Aexit-Straight-Potentiometer-Linear-dcc6584808058bc77a5484309b7756bf/dp/B0838L156M/ref=sr_1_11?keywords=10k+slide+potentiometer+100mm&qid=1583678555&sr=8-11
@peteramberg9710
4 жыл бұрын
The statement in the sketch: Joystick_ Joystick; doesn't pass syntax when compiled. Anybody know what's wrong with the statement?
@CaptainBobSim
4 жыл бұрын
I do not. I haven't had this error. I would recommend using the unmodified code from Amstudio's 5 axis video. You might also find more help in my 737 axis video. Sorry for not being very helpful, I haven't done this in a while :)
@wildgoobsid5
4 жыл бұрын
Small tip. Through the crappy arduiono out and buy Leo Bodnar
@CaptainBobSim
4 жыл бұрын
I likely will eventually, but there is a long list of things before it to be done. I saved ~$30 with this method, and $30 is a lot of money on this channel :) I'm not saying this is the only way, I'm just sharing the way I did it.
@alexandregobeil1440
3 жыл бұрын
Do you have the links for the 3D prints for the caps?
@CaptainBobSim
3 жыл бұрын
Thanks for reaching out. A while back all of my descriptions got deleted, and this one never got fixed! 📌Throttle: www.thingiverse.com/thing:2720384 📌Mixture: www.thingiverse.com/thing:2720409
@alexandregobeil1440
3 жыл бұрын
@@CaptainBobSim Thank you so much. Great job btw !
@thecessnaflyer6754
4 жыл бұрын
why are the graphics in the cockpit low?
@CaptainBobSim
4 жыл бұрын
I turned them down for a stream, but never turned them back up :)
@jamesbrusseau9194
3 жыл бұрын
Why aren't you selling these setups? I'd pay you for the knobs and holding brakets
@jamesbrusseau9194
3 жыл бұрын
jdbrusseau@gmail.com
@grafmaga86
4 жыл бұрын
It can be make on arduino mega?
@CaptainBobSim
4 жыл бұрын
No. The arduino mega is not compatible :(
@MauroReza
4 жыл бұрын
If you are using x-plane 11 you can use arduino
@CaptainBobSim
4 жыл бұрын
@@MauroReza With this sketch, and a potentiometer?
Пікірлер: 59