The best rope tutorial I've found on KZitem and it is perfect for further production (3d print of cutting). Greets from UA.
@SeanForsythTutorials
Жыл бұрын
Ah thanks, glad you found it useful! I have a few other rope knot tutorials you might be interested in also, you can find them in my "Free brushes" playlist. There are a few free knots in there too.
@Chrisfo967
Жыл бұрын
r50z has right.... no one explains the zbrush buttons so indepth like you do.....its true you are my hero thank you
@SeanForsythTutorials
Жыл бұрын
Ah thanks, much appreciated!
@잠을자라
Жыл бұрын
your tutuials are amazing!!! Thank you for sharing your knowledge. It helps a lot.
@SeanForsythTutorials
Жыл бұрын
You're very welcome, thanks for watching!
@Jaro3Me
Жыл бұрын
Wow the polygroups on the ends are super useful! Thank you for this it's exactly what I need and goes over everything in detail - also didn't realise how pwerful the defomation tab can be as well!
@SeanForsythTutorials
Жыл бұрын
Good stuff, glad it helps!
@9462pas
3 жыл бұрын
Great tutorial, thnx a lot! Btw didn't hear irish accent since ages - so different and special, and clear for understanding!
@SeanForsythTutorials
3 жыл бұрын
Ha, ha, thanks for that! Usually there are complaints about it! :)
@9462pas
3 жыл бұрын
@@SeanForsythTutorials my godness, they have to be thankfull just at least it is not scotish or welsh ;)
@SeanForsythTutorials
3 жыл бұрын
@@9462pas Ha, ha! Or from Kerry. ;)
@321357w
2 жыл бұрын
Brilliant tutorial and extremely helpful, so many applications for this. Thank you.
@SeanForsythTutorials
2 жыл бұрын
Thanks, glad you liked it!
@321357w
2 жыл бұрын
@@SeanForsythTutorials HI again Sean, would you have the time to do a quick tutorial on creating a tri curve brush of a simple hair braid and how to scale the tip to be thinner. I have followed a couple of tutorials but not getting the results I am looking for and I find your tutorials very easy to follow without issue. Thank you.
@R5OZ
3 жыл бұрын
Omg no one explains the zbrush buttons so indepth like you do, this is amazing, thank you :D
@SeanForsythTutorials
3 жыл бұрын
Thank you, you're very welcome!
@hombre0leg
3 жыл бұрын
This is absolutely magic lesson. Best regards.
@SeanForsythTutorials
3 жыл бұрын
Thanks OJ!
@segamai
3 жыл бұрын
Thank you very much for this clear and informative video!
@SeanForsythTutorials
3 жыл бұрын
You're welcome!
@PepegaeI
4 жыл бұрын
Really great tutorial, perfect pace and I learned a lot of things I wish I knew sooner Thanks for this
@SeanForsythTutorials
4 жыл бұрын
Ah that's great! Thanks for letting me know, appreciated!
@The3Doctor
4 жыл бұрын
Thanks a lot for this very helpful little tutorial!! Much appreciated!
@SeanForsythTutorials
4 жыл бұрын
No problem, glad you liked it!
@franciscolagrifa18
2 жыл бұрын
Amazing tutorial. Thank you for this!
@SeanForsythTutorials
2 жыл бұрын
You're very welcome! Thanks for watching.
@vincentjohnson5227
2 жыл бұрын
Nice Tutorial
@SeanForsythTutorials
2 жыл бұрын
Thanks!
@alicesun4764
4 жыл бұрын
amazing lesson
@SeanForsythTutorials
4 жыл бұрын
Thanks!
@SinaH-xi2il
4 жыл бұрын
Thank you for this great tips i wish you all the best
@SeanForsythTutorials
4 жыл бұрын
Thanks!
@GustiAditiarakhman
3 жыл бұрын
Great tutorial, thanks man.
@SeanForsythTutorials
3 жыл бұрын
Glad you liked it!
@aceaquascapes
4 жыл бұрын
thanks Sean for the great tutorial
@SeanForsythTutorials
4 жыл бұрын
Thanks, you're welcome!
@parabellumdz7388
Жыл бұрын
ur Amazing thanks
@SeanForsythTutorials
Жыл бұрын
You're very welcome!
@beeeean
4 жыл бұрын
for the initialize menu it would be different when you do append cylinder 3D. Thank you so much for this tutorial. ^_^
@karpenkoyullia6476
3 жыл бұрын
thankU :)
@SeanForsythTutorials
3 жыл бұрын
You're welcome!
@asjacastelli8150
2 жыл бұрын
I have a question: how could I possibly create UVs out of a complex geometry like this? I know I can texture it in Substance using triplanar projection, but I'd need to extract UV's that are perfect. What would you suggest? Thank you! :)
@SeanForsythTutorials
2 жыл бұрын
Yeah, I probably should have addressed that - I just forgot! Just unwrap the mesh before you create a curve brush out of it (about the 8 minutes in stage in this video). When you then draw it on a curve it will have those UVs. It will repeat the uvs several times along the curve, but overlay them on top of each other so you only have to texture one set of UVs. Hope this helps!
@asjacastelli8150
2 жыл бұрын
@@SeanForsythTutorials Thank you so much!
@damianocondello1445
4 жыл бұрын
I bought the Ropebrush but it just makes a regular straight curve when i try to use it. What am I doing wrong?
@SeanForsythTutorials
4 жыл бұрын
Hi Damiano, sorry to hear that! Can I ask, are you using ZBrush 2020? If you are (it was made in 2020 so will definitely work in that version), then it might be because you are trying to use it on a mesh with no subdivision levels (normally you'll see a message in orange underneath the top menus if it fails). Try deleting the subdiv levels and try again. Let me know if that helps!
@SeanForsythTutorials
4 жыл бұрын
I just had another thought, if you have a Layer on your object, it won't create the rope either, in which case, just create the rope on any object that has neither layers nor subdivisons and it should work fine. Hope this helps!
@yanzhang7985
4 жыл бұрын
why 9 vertical divide makes 5 loop? can't figuire it out
@SeanForsythTutorials
4 жыл бұрын
Yeah, some things just don't make sense, this is one of them!
Пікірлер: 50