This really came out stunningly - love the details of it with lights and turning table inside. Great job!
@mikehorgan3258
2 жыл бұрын
Excellent job Mark, definitely one of the best I’ve seen on here. The hinge placement and screwing them in before before cutting out the doors is a great idea.
@mark_makes_
2 жыл бұрын
Thanks Mike! 👍🙂 Are you looking to build one yourself?
@Smash_Moore
3 жыл бұрын
Another fantastic video. Such a cool idea
@backtotreasure1390
3 жыл бұрын
Awesome work Mark. I'm just building my wine barrel cabinet as well and your video gave me some ideas. Mine is an only Half barrel but can use some from you. Cheers.
@mark_makes_
3 жыл бұрын
Thanks! Good luck with the project!
@lefthandstory1280
3 жыл бұрын
Awesome very nice friend,great video❤️❤️.....
@johnwieske8422
3 жыл бұрын
HI Mark ,I like your handy work,,,,good on you regards your Opa
@popitastic
Жыл бұрын
Nice job...
@mark_makes_
Жыл бұрын
Thankyou
@gracesimmons3142
3 жыл бұрын
nice!
@gsallis85
2 жыл бұрын
Great work, mate! Can I ask how you originally cleaned up the metal brackets on the barrel. Did you use a wire brush? Or just normal grit sandpaper?
@mark_makes_
2 жыл бұрын
Thanks! I used a sander with a rough paper. All the best 👍
@branislavbaloga4099
2 жыл бұрын
Zháňam to veľké ložisko dajte typ s kadiaľ to zoženiem
@mark_makes_
2 жыл бұрын
It's called a 'lazy Susan' I bought it from my local hardware store. But I'm sure they'd be for sale online 👍
@ryanreed5585
2 жыл бұрын
Currently working on one. A lot of videos show fasteners for each piece of wood on each ring. I like how clean yours looks. Did you glue every ring? Does compression just hold the top and bottom rings on?
@mark_makes_
2 жыл бұрын
Hey Ryan, I didn't glue any of the rings except for the sections on the doors. If take out the original nails holding them in and push the rings down tighter than only a couple of sections need to be fastened and the pressure will hold them in place. 👍 All the best with your wine barrel conversion and thanks for watching 🙂
@ryanreed5585
2 жыл бұрын
@@mark_makes_ thank you for the reply and for the info!
@josephcarder9182
Жыл бұрын
I don't want to sand my barrel and want to maintain the Distributers stamp on it. Do you feel that a varnish coat would be sufficient?
@mark_makes_
Жыл бұрын
I also wanted to maintain the distributor stamp, not sure how deeply ingrained your's is, but with a light sand it's still quite clearly there. The varnish does bring out more detail, but if the oak is starting to grey it might not look as nice. All the best!
Пікірлер: 22