I converted a standard ATX computer power supply into a dedicated 12Vdc power supply that turns on without needing jumpers.
You can do this to make a 5Vdc or even a 3.3Vdc power supply, just depends on which wires you decide to keep! This would be especially useful if you're needing a power supply for an Arduino or Rasperry Pi project.
I used a Weller WESD51 solder station with a ETA tip, set to 600°F and a small amount of Sn63/Pb37 solder (2.2% flux).
Music by MOOG from the Mighty Car Mods channel.
Негізгі бет Making a 12V power supply from a PC PSU
No video
Пікірлер: 15