My Premier Project Plans: paskmakes.com/premier-project...
My Free Plans: paskmakes.com/free-plans/
A soon as I publish a video I usually remember something I meant to say. This time I forgot to mention I need to make a back screen to stop chips falling down the back of the workbench. I'll probably make that from the tin I took off the original workbench shelf. Also I will seal the inside of the drawers with a couple of coats of water based varnish.
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
Негізгі бет Тәжірибелік нұсқаулар және стиль Making a $50 Workbench into a Milling Machine Stand
Пікірлер: 852