How to make your own tobacco pipe using a drill-press (no lathe). Easy, fun and reproducible process.
Mouthpiece / Stem 3/8" (9mm) :
amzn.to/2TAInYn (USA)
amzn.to/2JMsVV0 (Canada)
9mm Pipe Filters :
amzn.to/2TU7Z3D (USA)
amzn.to/2W0arZ6 (Canada)
Tools:
Round Nose Router Bit (3/4") : amzn.to/2t8Eyh9 (USA)
amzn.to/2Ln2Fnx (Canada)
Hole Saw : amzn.to/2MZZssh (USA)
amzn.to/2XNy09G (Canada)
Reamer Set : amzn.to/2GtS3A2 (USA)
amzn.to/2XNpjfp (Canada)
Wood Rasp Set : amzn.to/2HXQDA3 (USA)
amzn.to/2XTEoak (Canada)
The Best Combination Saw Blade 10" :
amzn.to/303GLgY (Canada)
amzn.to/2NgBFHi (USA)
The stock I used is a piece of Cherry Wood. Cherry is a good and durable wood for a pipe. A good alternative to Briar wood and very different color. I used Raw Linseed oil (non-toxic).
Here is the list of tools I used :
- Radial Arm Saw (optional)
- Drill-Press (cheap, with vise)
- Caliper (optional)
- Drill bits :
+ Pilot hole : twist drill bit 7/64" (2.5mm)
+ Air hole : twist drill bit 9/64" (3.5mm)
+ Shank insert hole (for stem) : twist drill bit 13/32 (10mm)
+++ ...and reamer bit 13/32 (10mm)
+ Bowl hole : Forstner bit 3/4" (19mm),
+++ ...and Core-Box (round) router bit 3/4" (19mm)
+ Outside bowl : Hole-Saw drill bit 1-1/2 inch (38mm)
+ Outside shank : Hole-Saw drill bit 7/8 inch (22mm).
+ De-burring / countersink bit 1/2" (optional)
- Hand Saw
- Wood Chisel 3/4" (19mm)
- Wood Rasps (could use files)
- Sand paper (80, 120, 240 grits)
NOTE : This video and description contains Amazon Affiliate links and if you use those to purchase anything, my channel will receive a small commission at no extra cost to you.
Questions or suggestions? ...leave them in in the comments below, I read everything!
If you liked this video and you would like to see more like it, please subscribe!
Cheers!!!
Негізгі бет Making a Cherry Wood Tobacco Pipe (no lathe)
Пікірлер: 300