God Bless you sir for passing this on. A number of us have wondered how the heck to make this happen and your efforts of hit and miss are very helpfull.
@JayBates
Жыл бұрын
Just got a rotary for my machine. Thanks for this to-the-point instruction.
@DaveGatton
Жыл бұрын
Thanks for watching Jay. Much appreciated.
@rrr92462
3 ай бұрын
Great explanation for Vcarve Pro. I think more hobbyists out thier use that vs Aspire.
@glennhelwigwk8p530
3 жыл бұрын
Thank you Dave !
@DaveGatton
3 жыл бұрын
Thanks for watching Glenn. I really appreciate it.
@paulsmessyworkshop
3 жыл бұрын
Great explanation Dave.
@DaveGatton
3 жыл бұрын
Thank you Paul. I really appreciate you watching.
@rickmccaskill7888
Жыл бұрын
Just what I been wanting to make. Thank you.
@davematthews7686
3 жыл бұрын
Great explanation.
@DaveGatton
3 жыл бұрын
Thanks Dave. I appreciate you watching my videos.
@jafarbarmaki6668
Жыл бұрын
Thank you so much you are a good man
@sidewinderdrums
3 жыл бұрын
Great video Dave. Rotary scares a lot of people, but in the end, it is not much different that tradition cnc work. A really smart guy once told me "It aint rocket science".
@DaveGatton
3 жыл бұрын
Thanks for watching Rob. I appreciate you watching my videos. I think I may of heard of that guy that told you that. I'm not so sure he is really smart though.
@teaguewhite26
3 жыл бұрын
Very informative as always Dave, thanks for sharing this.
@DaveGatton
3 жыл бұрын
Thank you. I appreciate you watching and taking the time to comment.
@RBallarddesigns
3 жыл бұрын
That is a pretty cool process.
@DaveGatton
3 жыл бұрын
Thanks for watching Solar Man. 😀
@HarnealMedia
3 жыл бұрын
Great work Dave. Amazing to see it work
@michaeltiberi9853
3 ай бұрын
Hey Dave, I noticed you have an Albert Einstein bust project. Could you please do a video on the software creation of that.
@DaveGatton
3 ай бұрын
Thanks for watching Michael. Let me revisit that project and I'll put a video for that in the que.
@madeindungog
4 ай бұрын
Hi Dave do you need Vcarve Pro woud it work and be the same with Vcarve Desktop
@DaveGatton
4 ай бұрын
Thanks for watching. It's my understanding the Vcarve Desktop does not have "Gadgets" included like Vcarve Pro does. You need the "wrapping toolpath" gadget to create the rotary toolpath.
@stefanogobetto9897
10 ай бұрын
Buongiorno. Se potete aiutarmi per favore. Ho provato a fare una statuina di wilma dei flinstones ma non lavora in mezzo alle braccia e alle gambe. Perché?
@rrr92462
3 ай бұрын
How was the work piece chucked? I understand the tail stock end. Did you place a hole on the on the work piece to chuck it?
@DaveGatton
3 ай бұрын
No. Since I start out with square stock and use the rounding toolpath gadget to make a cylinder, I glue a piece of round scrap that I've cut with my CNC to the end of the square stock.
@MoonpieCreations
3 жыл бұрын
One day I’ll have my Gatton up and running. Stupid wiring. 😂🤣
@DaveGatton
3 жыл бұрын
And one day I'll have a pressure pot. 🙃 Thanks for watching buddy.
@dancesteps-vaishnavi5639
2 жыл бұрын
Hi, How long it takes do this job? Appreciate effort.
@jrdevelopment2020
2 жыл бұрын
excellent work i designed a rotary but i think i might just purchase this one you got here. is your board setup for rotary or did you just replace your y or x axis whichever your forward back is with the rotary? mine is y
@sergioferiaruz1556
Жыл бұрын
Hi, very good video! I have a doubt, which post processor do you select when generating the file?
@MetehanYurdakul
Жыл бұрын
hi mr dave i rly wanna this horse model but dont know how to fine where are i find this model ?
@DaveGatton
Жыл бұрын
I found the model on Thingiverse. It's not hard to find.
@MetehanYurdakul
Жыл бұрын
@@DaveGatton yes it for u.. My english is not good i dont find can u give me link ?
@DavidNicolanti
2 жыл бұрын
Dave, are the Vectric files available for sale? ….for all the pieces…
@DaveGatton
2 жыл бұрын
All of the free files I've used were downloaded from Thingiverse.
@charlessteed6000
3 жыл бұрын
Thank you Dave a great video as usual.
@DaveGatton
3 жыл бұрын
Thanks for watching Charles. Much appreciated.
@ljgault
3 жыл бұрын
Dave, you made it easy enough for me to even understand. Thank you..
@DaveGatton
3 жыл бұрын
Thank you Larry. I appreciate you watching. Hope it helped you.
Пікірлер: 40