it's finally here. the first of many mandalorian cosplay tutorials. enjoy.
@aliceongaro3273
4 жыл бұрын
Finally someone who Puts the Templates in the discription thankx soooo much
@aliceongaro3273
4 жыл бұрын
And finally someone who didn't worked with a 3d printer. (My english is Not so good i'm from Germany xD)
@TheBeardedMando
4 жыл бұрын
Templates straight from the source at The Dented Helmet. WOF did an outstanding job on them and they have stood the test of time.
@TheBeardedMando
4 жыл бұрын
It's not that I don't like 3d printers (I don't even have one yet...) I just love getting in there with my hands and seeing what happens.
@aliceongaro3273
4 жыл бұрын
@@TheBeardedMando I don't even have one too so i'm Lucky to find someone who didn't use one
@xinahliaofthefeywild8985
3 жыл бұрын
@@aliceongaro3273 Yeah same, its really hard to find a helmet tutorial without a 3d printer
@AScreenwritersJourney
4 жыл бұрын
Great step-by-step instructions. Thanks for posting!
@TheBeardedMando
4 жыл бұрын
You bet! already started filming Part 2
@xinahliaofthefeywild8985
3 жыл бұрын
YOU ACTUALLY USED A BUCKET ??!?!?! Omg I completely lost it at that point. Great Work. Looks good. This help me so much with my own helmet. Was a bit lost with the templates on my own. Thanks for sharing this.
@TheBeardedMando
3 жыл бұрын
Glad I could help!
@DTCFilms
4 жыл бұрын
Awesome video. This is a great companion to your “how to” thread on the Mercs forum. I’m wondering what other stuff I will learn? Can’t wait for the next video.
@TheBeardedMando
4 жыл бұрын
thank you so much! part 2 is in production.
@dawnmitchell11
4 жыл бұрын
Great video Rick!! Goo Gone or WD40 work pretty well with removing adhesive residue. Just rinse well with dish soap.
@TheBeardedMando
4 жыл бұрын
Thanks for the tip! I will try that next time.
@danielstark6027
3 жыл бұрын
1:40 peanut butter works great to get residue off from stickers. slap it on and let it sit for a day and then wash it off...works like a charm
@IslandFox9
4 жыл бұрын
Lighter fluid can remove the sticky stuff usually.
@TheBeardedMando
4 жыл бұрын
Ya, I have used that in the past. It's just not something I had on hand at the time.
@Jono999DERP
4 жыл бұрын
@@TheBeardedMando next time, I find that some mineral spirits works wonders
@GGrey1975
3 жыл бұрын
If the Force wills it, then in the spring I should be able to follow on this path, as you have shown "Te Way". Though I do agree with the use of "card stock" for printing/working with on the pattern - as I work in a book bindery, that is easy for me to acquire. The Suggestions for Goo Gone & WD-40 I have used aw well, though you already commented on that in another video in this series, of which I may comment on. So until this Winter ends so work can begin, supplies for this and a project that follows "Te way be Tarre Vizsla, te Mand'alor" NOTE: Anything in " " is in course/rough Mando via FunTranslations.com. Now, all I need is a Mandalorian Font set and I can write my own chain-code!
@TheBillxyz
3 жыл бұрын
A multi tool would really help with the sanding and cutting (safer too)
@TheBillxyz
3 жыл бұрын
Rubbing alcohol will remove the sticker residue super easy.
@kevinmckinney166
2 жыл бұрын
The way, this is
@justinray5076
4 жыл бұрын
Can a hard hat work with build instead of a bicycle helmet
@TheBeardedMando
4 жыл бұрын
Absolutely. the helmet in the thumbnail for this video was made using a hard hat.
@justinray5076
4 жыл бұрын
@@TheBeardedMando awesome I ways want to make a Mandalorian costume for like 6 years now and finally I'm in the process of making it mean while my bestfriend is making a Jedi smuggler costume.
@TheBeardedMando
4 жыл бұрын
Keep an eye on that smuggler, they have been known to have bounties put on their heads.........
@Guvna947
3 жыл бұрын
The cut proof glove goes on the hand without the blade 😂🤣😳😂FOOL!🤣🤣🤣
@Niner091
2 жыл бұрын
My only complaint.. is that all the sound came out of one ear... Idk why.. and it was only this video :c Otherwise I loved it!
@TheBeardedMando
2 жыл бұрын
Thank you 😁. noy sure about the audio, it was my first video. Still working things out even in later videos.
@Jono999DERP
4 жыл бұрын
would epoxy work instead of fiberglass resin?
@TheBeardedMando
4 жыл бұрын
I don't think that epoxy would saturate the cloth. The fiberglass resin and cloth are there to provide a foundation for the bondo that comes later (Part 6).
@Jono999DERP
4 жыл бұрын
@@TheBeardedMando awesome, ty so much. Also, ty for answering my question on the forum, helmet vs hard hat.
@nickd1961
4 жыл бұрын
Cosplay hoarder LOL smash like button
@TheBeardedMando
4 жыл бұрын
It's a real condition. I was hoarding greeblies even before I started my first kit.
@nickd1961
4 жыл бұрын
@@TheBeardedMando Oh I know LOL. I have at least 5 containers of varying sizes.
Пікірлер: 36