Strange ending. Woulda liked to see the folding mechanism work and how the metal branches connected. Cheers.
@toyyoter
2 жыл бұрын
Yes left disappointed
@ronniestanley75
2 жыл бұрын
Very much so
@davidhull2060
2 жыл бұрын
I cut my plugs off with the bandsaw....if you put painters tape over them before cutting, they peel off and stay stick to the tape.
@BarryHull
2 жыл бұрын
Samurai, as a former multi-chain automotive repair shop owner who used a LOT of air compressors I'd suggest putting an automatic drain on the bottom of your compressor. They work wonders. Always a thumbs up!
@frankwalerius1470
2 жыл бұрын
I was watching some old videos from a couple years ago and this is no joke; you now look so much healthier and happy. It seems you have found your path brother.
@Expendible1971
2 жыл бұрын
14:45 Better out than in!
@jimmccoskey8253
2 жыл бұрын
Thanks for the reminder on the air-comp drain...just did it, about a quart of yellow, oily water. Thanks for all the excellent videos!
@vell0cet517
2 жыл бұрын
Stunning result. The branch shaped metal support is a really clever choice that looks fantastic. Bravo.
@StillRunningWithPointedSticks
2 жыл бұрын
Ipe was the original wood used for the Atlantic City Boardwalk. It lasted 100 years. Sand. Water. Wind. Stinky feet. It used to be one of the most expensive woods. It has a high silica content. Mask up when sanding ipe. Silicosis happens “down the road” of life. The fork we take happens early in life. “Mask” is a good 4 letter word when woodworking. Think of tropical hardwoods as if you were working with FIBERGLASS. Silica is glass. Trees incorporated it because it resulted reduced insect predation. Even insects don’t survive ingesting silica woods.
@gnolls
2 жыл бұрын
Very nice bed. I find the shiny brass piano hinge clashes with the those nice dark metal branches you made.
@jertoneg1830
2 жыл бұрын
I really enjoy your videos and watching the progress on your off-grid cabin. I think it might have been better to flip the hinge over so the pin side would face down when the futon is opened for sleeping. You could have routed an opening for it to be recessed into so the sleeping surface would be completely flat.
@tristanscott4118
2 жыл бұрын
That’s assuming the hinge mounting holes were all countersunk on that side…
@jertoneg1830
2 жыл бұрын
@@tristanscott4118 True. That level of detail is not visible on the video. It is a beautiful piece.
@sapelesteve
2 жыл бұрын
Terrific build Jesse! That is an awesome piece of furniture & I love the wood that you choose! 👍👍😉😉
@ralphrohr
2 жыл бұрын
Love the wood-choice!! Well done on another outstanding peace of furniture!! Greets from germany!!
@samjensen3658
2 жыл бұрын
As the first viewer to this, just want to say thanks for consistently sharing and keeping craftsmanship up at all times. Legend! From Norfolk, England. 👊
@timdingleakajacksparrow2748
2 жыл бұрын
As a chippy myself! I can appreciate your skills! But it does help to have all the good Machinery! 👍👍✅
@TheTubeTube2
2 жыл бұрын
Another goodie! A really nice piece of practical furniture.
@eckhardreich4715
2 жыл бұрын
Fantastic great cinema, thanks for your inspiration - all thumbs up. Greets from Germany
@Bonzomallard
2 жыл бұрын
Another lovely piece. I love your attention to the construction but also the finish. Watching you rub that wood mate 😁BUT also it’s for the cabin and it’s gonna be proper art with a function. Lots of love and respect from Weymouth, Dorset, UK. 🙏💪
@Bonzomallard
Жыл бұрын
@The-Samurai-Carpenter___.858k Is this legit?
@nauticalknotcraft
2 жыл бұрын
Another beautiful piece of furniture. Well done.
@williamlott7612
2 жыл бұрын
Beautiful work Jesse. Darlington, South Carolina
@donwilliams3626
2 жыл бұрын
This is an attractive design and very practical too.
@TROdesigns
2 жыл бұрын
Beautiful work. I'd check that compressor out - they can blow up due to rusting from the inside. It's no joke. They'll go off like a 💣
@rapidunscheduleddisassembly
2 жыл бұрын
very Branchy...awesome as usual :)
@jordanschache5757
2 жыл бұрын
Really like this piece man! Well done, it looks fantastic
@molegrip3860
2 жыл бұрын
Superb looking piece. Thanks for sharing another great video.
@a0flj0
2 жыл бұрын
Try getting various fruit tree trunks from orchards that cut down old trees to plant young ones. You don't get very large pieces from them, but some of the wood looks great. And chances are you'll get them for the price of firewood. Usually the trunks are small enough that you can use your bandsaw to cut boards.
@timotheus2003
2 жыл бұрын
Nice to see you BRANCHING out...
@MCsCreations
2 жыл бұрын
Beautiful, dude! Fantastic work! 😃 Stay safe there with your family! 🖖😊
@huntz3215
2 жыл бұрын
With compressor, remove drain plug n put connection for flex line to run to a convenient spot with ball valve or auto drain at the end.Tank pressure will force fluid up the line.
@billdiehl156
2 жыл бұрын
Jimmy will be so proud of your templates.
@richardthomas1566
2 жыл бұрын
Real fan of the square plugs 👍
@thebigredwagon
2 жыл бұрын
Jesse is the Jimmy page of woodworking.
@endangeredmarmot4518
2 жыл бұрын
Nice work, Samurai. Sapele is beautiful wood, good call.
@jmert_5859
2 жыл бұрын
So nice
@richiestaklinski5499
2 жыл бұрын
Man your going to miss that shop!
@joroyle8108
2 жыл бұрын
Lovely old job 👍
@JohnMason-Hill
2 жыл бұрын
Gorgeous!!!
@karlgarnett7445
2 жыл бұрын
fantastic work
@manfred4766
2 жыл бұрын
" I got my legs shaped with the router !!! " LOL !
@nakulah
2 жыл бұрын
Nice wood choice!
@chadhilk
2 жыл бұрын
Going to drain my compressor right now!
@jkdubb
2 жыл бұрын
Fantastic build!
@ericklodnicki
2 жыл бұрын
.... but that CORDED router. so retro! 🎯
@Andrea-bw8xm
2 жыл бұрын
Nice job!
@mauriceryton
2 жыл бұрын
Too funny, l finally raised mine up so l can access the drain valve. I had a similar experience.
@mickrose9633
2 жыл бұрын
I've done that. but your the champion as far as how much water came out.😂
@4652johnson
2 жыл бұрын
I usually love your stuff end to end but the ending on this one was weird. I would have liked to see more fabrication of the metal branch and also how it worked. Seemed rushed 🤷♂️ Futon came out nice though!
@larry78cj7
2 жыл бұрын
Looks great!
@bobbillock879
2 жыл бұрын
I have seen those auto drain system for the air compressors but never tried it
@kevinshannon83
2 жыл бұрын
I've found putting a strip of tape on the plugs before cutting on the table saw stops them shooting out.😁
@hblomqvist
2 жыл бұрын
The Futon Clan
@samuelb6960
2 жыл бұрын
I had a customer that was having problems with an air powered machine I found that there was alot of water getting into the valves causing them to stick so I checked their compressor the 80 gallon tank was full of water. It had an auto drain so no one ever checked it problem was the drain was plugged.
@federicogualeni1394
2 жыл бұрын
Great ! From Italy
@secretagent4200
2 жыл бұрын
Thanks for the reminder on the compressor, got a solid gallon out of mine…oops
@michaelplays2449
2 жыл бұрын
Nice build !!
@DrIngo1980
2 жыл бұрын
I was confused why you'd call the frame (the thing you built) a "futon". So I checked wikipedia and lo and behold, you are referring to the American-style "futon", which actually includes the frame in its meaning. That was new to me, never heard that before. If you'd ask a Japanese person they'd never even think about a frame, because in Japan "futon" means the actual mattress as well as the bedding/covers, plus a futon would usually be placed on tatami mats, not on a frame. Anyway, interesting build and video.
@n3v3rnyc37
2 жыл бұрын
I'm really annoyed this didn't show up in my feed I had to go to your channel directly to find it even though I knew it was out
@edkovac8978
2 жыл бұрын
Very nice. Could you talk about your plans for the new big cabin?
@josiahburndstkiar3774
2 жыл бұрын
What is with the no safety glasses? I take it you've never caught a wood chip in the eye before? The router is a HUGE risk to have no safety glasses on. Maybe you just can't see them, but looks like they are missing at 6:50ish. I get forgetting some times, but you only need 1 mistake or a couple close calls to never forget again.
@jordanschache5757
2 жыл бұрын
Agreed mate, having cut my fingers with a circular saw due to my own stupidity I've got a heightened awareness of the dangers of woodworking. Unfortunately this community doesn't react well to someone criticizing their hero, prepare for the onslaught. (Inb4 "saftey Karen")
@daveklein2826
2 жыл бұрын
Safety Sally has arrived
@jordanschache5757
2 жыл бұрын
@@daveklein2826 good one Dave. Heaven forbid you comment anything other than those two words ever. 😂
@daveklein2826
2 жыл бұрын
@@jordanschache5757 ok Sally
@StillRunningWithPointedSticks
2 жыл бұрын
@@daveklein2826 DK is correct if not sophomoric and misogynistic in criticism. Huff some cedar dust mixed with walnut and epi and get back to us as soon as you get that lung transplant and a glass eyeball with a tiny American flag for a pupil. I know too many PAST woodworkers with 7 digits, Epi pens in their pockets because of anaphylactic response to wood dust “all of the sudden”, and skin rashes due to wood dust exposure. Exotic wood dust especially. Even the smoke can severely disable the inhaler. But hey, I’ve only been working woods into concert quality flutes for 30 years. I’m still learning.
@RuslanB
2 жыл бұрын
Ghost of Samurai is working from his sold shop.
@Gantzz321
2 жыл бұрын
wanted to see the finished product in the down position, to see how the metal braces worked and where they were in the sleeping configuration
@jlaske5
2 жыл бұрын
Second from Michigan!
@dbhoward56
2 жыл бұрын
Where are you going to put all your equipment while you build out your new homestead?
@MILODON77
2 жыл бұрын
Draining the Air compressor was a daily chore at the shop I worked at as an Auto mechanic. FYI.
@RangieNZ
2 жыл бұрын
Is all of the wood working equipment going to end up at the lake property, or setting up another shop somewhere, or?...
@timjbd
Жыл бұрын
You seem to use drill and chisel for mortises (generally speaking, not in this particular video) when the mortise machine would work much more easily. What gives?
@Noobish87
2 жыл бұрын
Did you put a washer behind the branches where they attach to the seat of the bench? I feel like a washer would prevent a lot of wear. Or at least keep it from being visible.
@claytonkincaid6501
2 жыл бұрын
Ooo get a shaper origin!
@bla156
2 жыл бұрын
The question is, where is the futon?:-)
@d.j.robinson9424
2 жыл бұрын
That is gorgeous man, what 70's colour of shagg carpet you puttin in there..?💚👍👍🛠
@Shmaffer
2 жыл бұрын
A lot of effort went into the multiple takes of Jessie performing his part of an orchestra.
@Jayman5281
2 жыл бұрын
Clean shop achieves clean mind Empty compressor one must Mastery is near🙏
@hdwoodshop
2 жыл бұрын
I would’ve mounted the hinge to be the least visible-and visible.
@president2
2 жыл бұрын
Love it!!!
@lifeanywhere
2 жыл бұрын
Looks damn good bruh!!
@WarriorWise1
2 жыл бұрын
3rd from New Zealand, love your vids
@factotumindustries
2 жыл бұрын
So where are all the tools / workshop going to go with the sale of the house? Renting a warehouse?
@pmh2390
2 жыл бұрын
i hope the metal branches rotates down when you unhook the back or that could be a problem
@edmundkulp9249
Ай бұрын
Is it possible to use a futon metal frame and turn it into a garden bench.
@williammoore4101
2 жыл бұрын
Hey Samurai, what kind of finish do you use? It looks amazing and simple to apply.
@torridice
2 жыл бұрын
Did you watch the video or…..
@daveklein2826
2 жыл бұрын
LMAO, Odies oil
@andrejohnson6731
2 жыл бұрын
LOL
@tatepishepard
2 жыл бұрын
@@torridice Do not feed the troll :D
@williammoore4101
2 жыл бұрын
@@tatepishepard don't worry. I thought it would be a good way for a second spot on the advertisement of Odies Oil lol.
@budbrady3289
2 жыл бұрын
Left your tool vest at the cabin, didn't ya? 😁
@jangrahame4891
2 жыл бұрын
KZitem isn't letting me like your video again!
@stick004
2 жыл бұрын
So are all the tools going with you on the move? Or are they staying with the new owners?
@silasmarner7586
2 жыл бұрын
I always have my compressor tank near a drain when emptying it.
@rainydaylady6596
2 жыл бұрын
Lovely. Are you making the large cushion/mattress, too?
@snappyrepairs6482
2 жыл бұрын
Ahh a futon you can root on
@i3_13
2 жыл бұрын
Your workshop is not part of the sale?
@karltraunmuller7048
2 жыл бұрын
My fridge does the same nasty thing to me, always fills up with water 💧
@makerpat
2 жыл бұрын
Thought you sold the house? Did you keep the shop?
@jcoats5529
2 жыл бұрын
New owners probably don't take possession for a couple of months at least.
@andrejohnson6731
2 жыл бұрын
Wood type used : Sapele
@jasonallen1532
2 жыл бұрын
Are you planning on moving your whole shop up to the lake?
@physicsguybrian
2 жыл бұрын
Nice results there Sammy C! Since you sold your property, how much longer do you have access to the shop OR was that not part of the sale?
@JerryDechant
2 жыл бұрын
Very nice. Now you gonna make the matt too? ;)
@joshuahasson9687
2 жыл бұрын
What brand plug cutter is that? Mine don’t cut nearly that neat.
@markfischer5044
2 жыл бұрын
0:17 I'm all for a good pencil...but how many pencils does one Samuai need?
@adamwalker8483
2 жыл бұрын
Are you in the TV show "Manifest"?
@cletusmac10
2 жыл бұрын
You just bought yourself another year of ignoring your compressor, well done sir.
@francishoover8633
2 жыл бұрын
Why didn’t you turn the hinge over and inset it so ya don’t have to lay on it?
@thomaskaiser7984
2 жыл бұрын
How does it fall down I don’t see how it works
@douglasewing5290
2 жыл бұрын
If you sold your house, where is your woodworking shop located?
Пікірлер: 156