A pro!!!!!! I’m learning how to do this tomorrow and I’m in awe.
@GennipherKrabzree
Ай бұрын
Thank you sir! Best tutorial I've found on here! I'm transitioning from copper foil to lead and this helps so much!
@McGillsWarehouse-GlassSupplies
25 күн бұрын
wow this is hardcore, no gloves at all. this is an experienced pro right here. I have to watch this a few more times...love it.
@johnmca5643
2 жыл бұрын
Thank you. I haven't done this in 25 years. You've helped me remember.
@johnmca5643
8 ай бұрын
I'm here for the same reason. It's been about 25 years too.
@RabRabNZ
2 жыл бұрын
its always amazing to watch an ultimate master at work
@sueannadams9440
4 жыл бұрын
Thank you. I'm trying to make the transition from copper foil to lead came. This is the best video I've found for this purpose. It took me 2 attempts, and the 2nd attempt was just like the video!!! Feeling super accomplished!!!
@danhaas6448
2 жыл бұрын
Perfect. My Dad made 2 windows 20 years ago for our house which I've now moved twice. My problem is my new house needs 4 windows and we lost Dad 2 years ago so now I'm going to make them using the skills I learned from him with a little help from this video. Thanks!
@adamd3955
2 жыл бұрын
That’s the good stuff right there…
@sallyyotz3995
7 жыл бұрын
Awesome beginner video!! I've always wanted to try this but I've been afraid. This took a lot of the fear away. Thank you!!
@iant419
4 жыл бұрын
Just get a good soldering iron. Can't cheap out on that.
@nekoac2122
9 ай бұрын
Great tutorial! Thank you!
@cindywilliams2083
3 жыл бұрын
Great instructions. I heard details & products without stupid additions. Keep up the great work & thanks i will check out products.
@michaelboles313
2 жыл бұрын
Excellent video! Very informative and really helped me to understand the whole process. Thank you!
@RosemaryArtsMB
Жыл бұрын
Thank you very much for all the details, you are honest and great :)
@robertr2731
4 жыл бұрын
God Bless you! Your more man than me !!!! I wouldn't touch that lead with a 12 meter Cattle-Prod.... 👀
@Engelhafen
3 жыл бұрын
Great instructor
@philipsegal6641
3 жыл бұрын
Great lesson must try it.
@mikeydizme1
7 жыл бұрын
Thank you for taking the time to make this informative video. It would have been even more helpful if the camera person could have zoomed in a little on the work. Not very clear.
@arturoplata2489
3 жыл бұрын
That kind of work is very nice
@wboquist
5 жыл бұрын
Great introductory presentation. Thumbs up!
@caroltillietmo6889
5 жыл бұрын
Thank you very informative.
@moogie3111
6 жыл бұрын
Arg, close up would have been wonderful, can't see a thing.
@ebeaulieu813
6 жыл бұрын
Someone tell the camera operator to do close ups. The instructor and camera operator are not working together. Close ups and slow your pace down, work together.Lots of information, unfortunately missing a lot of close ups of whats being demonstrated.
@CoffeeblackUk
4 жыл бұрын
its kinda driving me mad. is cameraman asleep.....
@ZacharySalman
7 жыл бұрын
I am very interested in architectural crafts, and leaded/stained glass windows are a big interest of mine.
@somethingbeautiful2212
5 жыл бұрын
Excellent! Thank you ☺️
@nhw8906
3 жыл бұрын
Great video. I would be grateful if you could kindly share a video of how to attach a barrel tube hinge and lock to and between two glass panels. Thank You 🙏🏻
@spinkas3237
5 жыл бұрын
Nice clean work and finished window/
@lydiagreenartandhorses
3 жыл бұрын
Straight lines are so much easier, I chose a piece with a lot of curves for my 2 project, just need to lead and solder it now, I might try one window with the beveled pieces, they look pretty, not too expensive.
@pegetheridge2103
7 жыл бұрын
Great job Max
@user-jf7qu7ul6g
6 ай бұрын
how can you keep the lead putting from drying out?
@ChristopherAMacleod
8 жыл бұрын
Nice work....thanks!!!!
@adelaredding8530
4 жыл бұрын
gracias!!!
@daniellemagne
7 жыл бұрын
Thank You , that,s help .
@jillholland5614
4 жыл бұрын
excellent
@Michael-wy3ze
Жыл бұрын
hell yea
@MariaGonzalez-mb5tv
3 жыл бұрын
Nice
@CN-yf3lr
Жыл бұрын
Thank u so much! I wanted to do this for so long but I'm afraid cutting my finger in the small sawing machine. It is a lot of work! glass is expensive though, I wonder if may I ask u: that sample piece u made, what's the avge price for that size of glass? your answer may ignite me to do it or not! Lol
@charanlangton7418
8 жыл бұрын
Great.
@bethpearson9934
7 жыл бұрын
Our schools mascot is Red Devils here in Lowell Indiana
@jasonk9734
6 жыл бұрын
Nice video very informative. I just have a quick question in regards to working with lead. Is there any risk of getting lead poisoning? For example using that saw to cut the lead to size, I noticed you're not wearing a respirator and there is no vacuum on the saw. Are you not concerned about lead particulates in the air? Also handling the lead without any gloves is a little concerning to me. What if you have young children or the grandkids are over wouldnt that be especially dangerous for them? If anybody has any information about health risks and this Hobby please comment. I still want to do it though. Lol
@jamestaylor5079
4 жыл бұрын
Where do do you get your lead/zink saw blades?
@MikeAG333
Жыл бұрын
A saw for lead? What on earth do you think that lead knife is for?
@janicerath3540
Жыл бұрын
How do you measure for the zinc frame line on the outer edge of the pattern?
@gilbertoabreu9513
8 ай бұрын
Olá boa tarde gostaria de adquirir uma máquina desta de fazer chumbo
@johnmca5643
8 ай бұрын
Do you solder both sides?
@juliesaville9241
11 ай бұрын
Hello how can I purchase the saw from Australia please ?
@danevankirk4424
3 жыл бұрын
Do you still sell your saw?
@deborahmays5357
3 жыл бұрын
Can you send information on how to obtain the small saw please?
@thepatron4663
2 жыл бұрын
On ebay
@DavidSmith-yf2mf
6 жыл бұрын
this is cool. is a book on how to do this and how do I order one.
@aubreycheney7595
4 жыл бұрын
What temp should your gun be at so it doesn't melt the lead?
@suzannebredy3547
5 жыл бұрын
Hi there, you don't patina the soldered pieces after you are done mudding?
@ScottMshao69
6 жыл бұрын
a pic of finished product close up?
@mercu23daft54
7 жыл бұрын
Could someone make a list of materials?😳
@vociferonheraldofthewinter2284
7 жыл бұрын
They should have a starter kit. All of the tools in one idiot-proof package.
@orangezest5501
4 жыл бұрын
Hyper fast and I need to see close ups. Need to remake this video glass cutters.
@hayleypohl2202
Жыл бұрын
This video is hard to follow and doesn’t show what he’s doing in a way that’s actually visible on camera, it feels like an infomercial coupled with how fast he is talking
@ademeza1673
3 жыл бұрын
Alguno en español por favor 🙏
@bradwatts8222
7 жыл бұрын
Is liquid flux contamination a thing for home use , I guess your flux gets used up pretty quickly in a factory environment , I'm doing a bit each week so should I pour a little into small container such as a soda bottle lid then toss it at the end of my session or is that just wasting perfectly good materials for the sake of being pedantic
@torip9365
7 жыл бұрын
That is the perfect way to do it! Just pour out a bit at a time so none is wasted. As a college student with not much spare cash, it is, in my opinion, the best way to get the most out of a bottle of flux.
@stevedingman474
4 жыл бұрын
Ok I’m looking to this as maybe a new hobby . I have been a window repair man at the Iowa state fairgrounds for 20 years I’ve probably cut and replaced a square acre of glass in my time of working maintenance. But isn’t cutting lead with a saw making lead dust and isn’t lead dust like deadly to breath eat touch or get on your skin ? Cutting with a knife I can see being safe but cutting with a saw a huge no no ! Not trying to be safety sally and I’m sure I’ve breathed stuff from the fairgrounds that’s 150 years old from grinding cutting scraping but no way I can not say something about lead dust from a saw ! I know I’ve cut leaded glass and crystal to make matching stuff and it came with skulls 💀 and cross bones 🦴 on it !
@ShirleyAFrank
4 жыл бұрын
Where can I buy the lead for my work
@Banjo-lm2wl
3 жыл бұрын
No sound
@PharusGlobal
3 жыл бұрын
Please check your computer connection. It has been working fine.
@ceciliacronin7949
10 ай бұрын
Can't see what you are doing because of the writing of what you are saying
@theresevarney4715
Жыл бұрын
You actually make me nervous. You're rushing thru this project. The camera can't even keep up.
@markwitte303
3 жыл бұрын
not a good presentation. to fast and different terms used for the same tools. poor camera position. over complicated.
@hairyscary9044
5 жыл бұрын
Seems like you missed a few steps.,like soldering the other side of the panel ,wiping the flux off the panel to prevent tarnish, applying cement to seal the panel and make the lead go black and the polishing at the end to make a shiny protected finished panel that does not rattle.. This would take a hobbyist at least an hour . Maybe make a more comprehensive tutorial and less of the you can buy stuff.
@colbrittle6456
5 жыл бұрын
sorry but this is not a professional video. Putty should never be used for grouting a leaded panel. It is too soft and allows movement. A proper leaded light cement is essential
Пікірлер: 76