I envy his workshop too, lol. I cannot justify spending that much money just for fun, lol
@Juliussalviejo20
5 жыл бұрын
You have switch and connected to dynamo
@compfreak530
6 жыл бұрын
Every one of these videos is amazing. fast intro. no speaking.. just gets the job done. and great ideas.. keep it up!
@RCAvhstape
6 жыл бұрын
It's like a steam engine, except instead of steam pressure it uses electromagnetic force. The switch acts like the steam valve, opening and closing as the crankshaft rotates. You could control the timing of it by sliding the switch forward or backward, or by changing the shape of the cam. The switch is noisy and will wear out, but for a demonstrator that only runs for a few minutes once in a while to show off to people it's very cool and keeps it simple and mechanical with no electronics needed.
@theshuman100
6 жыл бұрын
Steampunk electric motor
@bodeine454
5 жыл бұрын
I'm thinking the same thing. I'm not really an electrical motor hobbyist but I'm interested in it. I'm wondering what could be used instead of this switch to do the same task like maybe a magnetic switch or sensor similar to a crank trigger on an automobile crankshaft dampener?
@jamesrogers47
5 жыл бұрын
You could construct a more robust momentary contact switch to replace that relatively fragile microswitch. I think you should use a little graphite lubricant inside the bore of the solenoid to further reduce friction. Still, very good work.
@stevearcher4365
5 жыл бұрын
where is the dc voltage and power supply
@SmilingDevil
5 жыл бұрын
Helium Road , and some explanation from the author of this video on that matter would have been nice....
@beaverbear9157
5 жыл бұрын
First person I've seen since Highschool using Siemens Solid Edge. I loved using that program and could always make some pretty cool stuff with CNC and 3D printers! Glad to see someone putting its advanced amount of tools to use!
@e36racer44
5 жыл бұрын
Love seeing the drill bit stationary and the piece of metal spinning Seems s much better way of doing it!!
@thomasblackwell9507
4 жыл бұрын
Your attention to details make this absolutely beautiful!
@Omi142
6 жыл бұрын
What a neat work. Very satisfying to watch.
@paolabosman8548
5 жыл бұрын
Wyrww🚍🚜🚘🏫
@bistakos1
5 жыл бұрын
it is not satisfying,it is JEALOUS!He has the tools to make everything for himself! thats a blessing!
@omastrogatos865
5 жыл бұрын
You can make this without special tools.Take a look at mine.kzitem.info/news/bejne/p6qQrGh6fHZkpWk
@claritoresdiano1021
5 жыл бұрын
@@bistakos1 hahaha....
@demonsparkx
6 жыл бұрын
*That sound the hacksaw makes right before it reaches the finishing cut* Priceless.
@petermiguel4218
5 жыл бұрын
demonsparkx make something that amazed me that our problem ,that problem this is basic or toys don't worry. log your own made ,how good you are thanks,,,
@LordSandwichII
5 жыл бұрын
@@petermiguel4218 Wut?
@dpyp
6 жыл бұрын
You can just replace the switch with hall sensors would be much more efficient. But nice make though
@TheRasNyabinghi
6 жыл бұрын
or inductive sensor
@laharl2k
6 жыл бұрын
Or an optical sensor and you dont need a magnet and you can move it to get more or less torque
@vimukthiernest5391
6 жыл бұрын
sonic boom ..
@gary4120
6 жыл бұрын
Excellent Idea, please post a link when you upload a video of your product made with this modification!
@حقائقعنكلشيء
6 жыл бұрын
sonic boom ا
@harilalmn
6 жыл бұрын
I love the way you care for details and neatness in doing things... Great...!!!
@charlesthepaperman
5 жыл бұрын
Excellent work. You really need to add a 3d printer to your tools mate. That would outclass the woodwork and non metal part machining by the factor "a lot" 😜
@shaiknj
6 жыл бұрын
this idea could have so many applications. In a production line a really bored worker would be responsible for making one of the parts. When you have the ability to make all parts and bring them to work together it becomes an interesting project.
@holetoanotheruniverse4690
6 жыл бұрын
The switch will break pretty fast because of the relatively high voltage of 30v DC and the inductance of the coil there will be high voltage sparks of about 2kV in the swich. Try a small thyristor from old high power electronics or buy for 1€
@tobiasbatt1760
6 жыл бұрын
Or take a free running diode ;-)
@samuelegilioli8349
6 жыл бұрын
Hole to another Universe Sorry, can you tell me what's the duty of that commutator? It's to invert the direction of current in the solenoid?
@trellend
6 жыл бұрын
It's an on/off switch, it fires the solenoid in one direction only. Momentum carries it around.
@karimadel5911
6 жыл бұрын
@@trellend no if the switch is not existed the rod will be pulled and pushed this will make the mechanism would fail
@velcro8223
5 жыл бұрын
@@karimadel5911 Actually the pistons in a two stroke single piston motor are push only so the solenoid doesn't need to push and pull. The momentum in the flywheel allows the solenoid to reset while the power is off.
@naknakacknak
6 жыл бұрын
Excellent craftsmanship. Really entertaining to watch. Thanks.
@MCsCreations
6 жыл бұрын
Amazing work, man!
@prashantjoshi849
5 жыл бұрын
Perfectly designed engine from a super skilled engineer ...
@lexugax
6 жыл бұрын
Very interesting concept. I have a suggestion, though. I think that switch won't last too ling. You could instead use solid stated components, like an IR switch and transistors instead of that mechanical switch. Less moving parts, less wear.
@KrishnaSingh-pm5mu
6 жыл бұрын
lexugax naughty
@vicentapaca6875
6 жыл бұрын
+
@dies200
6 жыл бұрын
It might not last too long, but hecc. the sound of that button is nice
@robertkat
6 жыл бұрын
These microswitches are tested similar, they last over 100,000 times off and on.
@rayraycthree5784
5 жыл бұрын
+Robert Kattner the inductive current might at switch break is likely to damage the contacts in short order. At the very least, put a diode across the coil to limit contact arcing. the micro switch position should have been made adjustable to peak the torque.
@СергейКузин-ч5щ
5 жыл бұрын
Такая мастерская со всеми возможными инструментами просто мечта 👍
@pierrelecaillou6966
3 жыл бұрын
Avery nice creation. Elegant and beautiful. Well done!
@scottyforte5889
4 жыл бұрын
Such finesse. It must have been super fun. Very cool very interesting!
@luisantoniomarrega1120
6 жыл бұрын
Parabéns meu amigo, o seu projeto ficou perfeito e profissional! Rio de Janeiro RJ Brasil
@area2204
6 жыл бұрын
Também sou Br e do rio
@shahwaizshaikh2146
6 жыл бұрын
Good
@marcelokniss7810
6 жыл бұрын
ei mano, tu sabe qual software que ele usou pra fazer o desenho? não é autocad né?
@Dust.5
6 жыл бұрын
o nome está no próprio vídeo kkkk é solid edge
@marcelokniss7810
6 жыл бұрын
@@Dust.5 ah soh. É que eu tava vejo pelo celular e meu celular tá tudo bugado kk. Vlw
@manjunathsanjeev5234
6 жыл бұрын
I don't have any of your tools but still watching.
@Acecool
6 жыл бұрын
Never use gloves on rotary machines such as that sanding belt... If a piece got caught in the space between the belt and the wheel, you'd break your wrist, likely at the least with worse injuries resulting...
@kailashsaini5337
6 жыл бұрын
seriously
@dantefitti6678
5 жыл бұрын
good to know
@savagesock3598
5 жыл бұрын
Kailash Saini lmao
@hdunn8589
5 жыл бұрын
I have done that once luckily I didn’t get anything but a very bad hurting hand
@timsharpe3498
6 жыл бұрын
Nice craftsmanship and combination of materials.
@MMBNMalternateaccoun
5 жыл бұрын
So what exactly is the output of this engine? You said you used 30V of DC current what would be the output of this? And what would you suggest it could power? Such as a toaster?
@mintcoyote3060
5 жыл бұрын
a toaster is directly powered by ac/dc current
@omgitsmarto5558
5 жыл бұрын
He makes it look so easy. Good work man.
@isaacgonzalez9295
6 жыл бұрын
7:48 sounds like a rotary
@colsanjaybajpai5747
6 жыл бұрын
Beautifully simple. Very well made
@guckyschannel6063
6 жыл бұрын
What does that tell us now? Ah, I understand, you wanted to show what a great hobbyist you are. Wow, impressive!
@eagles97796
6 жыл бұрын
What a brilliant workshop
@positivenegative6525
6 жыл бұрын
Would really love to see this run by ac. I may have to try and make one myself. The hardest part would have to be syncing the frequency
@kapekape7580
4 жыл бұрын
wait he used a bolt i thought you needed to use a magnet for the piston. i am confused
@Alvaro-em1dj
4 жыл бұрын
The coil itself is a magnet, u have to use metals that are attraced to magnets for it to work
@rodrigokiefe3850
4 жыл бұрын
the solenoid generates a magnetic field that pulls the metal. I think it pulls every time the piston is away from the solenoid and stops pulling when it is inside it (hence the asymmetrical wheel for the switch)
@danteverna4261
6 жыл бұрын
That’s an awesome little motor!
@blakearnold489
5 жыл бұрын
It sounds like a 7.3 diesel 🤣🤣
@jacksidr6182
6 жыл бұрын
Looks great but mechanical switch isn't a good idea, it's provide a lot of noise and it's brake soon. You can use a magnet and hall sensor, to provide a lifetime and reduce noise.
@kennethjackson7574
Жыл бұрын
About 60 years ago my high school physics teacher built one, but today it would be extremely difficult to build an exact copy. First you would need the lid from a Butter-Nut coffee can because that was the flywheel. 😊
@bercik7075
6 жыл бұрын
Good job!!
@صوفيالجابري-ه2ع
6 жыл бұрын
و hello who are you today كيف حالك اليةم
@abdelrahmansaad1670
6 жыл бұрын
جود جوب في عينك
@abdelrahmansaad1670
6 жыл бұрын
🕶
@alvinjarolimek4321
6 жыл бұрын
Over 2.5 million views at this point. Good job, man!
@virendersingh9377
6 жыл бұрын
you sir are very dexterous!!
@georgevarghese238
3 жыл бұрын
Wonderful craftsmanship, Thanks
@Dolfinchik1
6 жыл бұрын
Good job! Connect the capacitor parallel to the switch, it will increase the power. The container should be selected based on the condition ((R^2)/(4*L^2)) > (1/LC), then the oscillations will be aperiodic.
@nelsondarwinpaktech3954
6 жыл бұрын
Very respectable sir,,,if some1 is providing knowledge to others.....
@exocurve3836
6 жыл бұрын
so neat n meticulous workmanship
@evren.builds
6 жыл бұрын
where did you get your branding iron made?
@burakdenizbayraktar1029
6 жыл бұрын
sanayiden
@Beaks-gw2iz
5 жыл бұрын
Selfmade
@mohdnohmajid6970
4 жыл бұрын
Someday all 🚗 and motorcycles will use solenoid engines!
@TheFatherKaz
6 жыл бұрын
Did any one else hear the clock ticking?
@SpandanDeykolkata
6 жыл бұрын
just my thought
@serg_sel7526
5 жыл бұрын
Me too
@colsanjaybajpai5747
6 жыл бұрын
Wonderfully made. Very simple
@demjel6955
6 жыл бұрын
which is wonderful it's the mecanical realisations, you can do everything you imagine well done!
@ИванМарковский-э6щ
6 жыл бұрын
Да вообще фигня, у нас такой же станочный парк в каждом доме!!!!!
@ЯрославДемянчук-ы7т
6 жыл бұрын
Иван Марковский жиза
@rayraycthree5784
5 жыл бұрын
the microswitch contact cycle ratings are usually for low current, resistive loads, not the large inductive current after the coil magnetic field saturates. Each current break generates a high reverse voltage to try to continue the current flow which results in and arc across the contact pads or a metal oxide of the contact material which increases contact resistance until the switch fails.
@Arti128
6 жыл бұрын
You should work for the Government or something similar, these projects are incredibly careful and imaginative!
@РуланШанталий
5 жыл бұрын
Тоже ищешь коммент на русском?
@FernandoR16
6 жыл бұрын
Just awesome! Congratulations!
@CyborgElf
5 жыл бұрын
That is a nice shop
@markissboi3583
6 жыл бұрын
2 wires r connected to ? dam always something missing :) guess u get a battery try diff volts work way up :)
@Sil3ntNinja01
5 жыл бұрын
It's most likely a DC power supply. Some models even let you choose the amount of voltage you can feed
@tom3056
6 жыл бұрын
i love the timing system with the single camshaft lobe xD
@salomewiqarishvili342
6 жыл бұрын
Tom sen
@go_anime
6 жыл бұрын
محترف
@muzammilausmani7923
6 жыл бұрын
مقاطع للانستقرام
@عمراناشتي-ه4ظ
6 жыл бұрын
Muzammil Usmani قولي عذمتي
@seroenloqueser
5 жыл бұрын
@@عمراناشتي-ه4ظ la cago wn ajajja
@MegaChekov
6 жыл бұрын
Well done all the best from John in Texas
@valentindelgado4983
6 жыл бұрын
very good work and very clean the development of it. Congratulations, you see that you really know what you are doing. I like the way you work. I believe that we must be constructive and not criticize ......
@matisfuste9179
6 жыл бұрын
Can you make a plasma gun ?
@kimsylvester964
6 жыл бұрын
In the 40 watt range? (TERMINATOR)
@swarojitmondal9329
6 жыл бұрын
Matis Fuste
@regenbiocorps
6 жыл бұрын
no offence, but that's just too much to ask from a "you tuber"
@surendra1990
6 жыл бұрын
that grossly derogatory.
@antonioverissimoserra8300
4 жыл бұрын
Muito bem construído! parabéns.
@vineksoodan4247
6 жыл бұрын
Nice collection of machines
@fadhlaouinasreddine526
4 жыл бұрын
Genius at work
@РоманСподин-б8т
6 жыл бұрын
Люди, зачем?
@РоманЗаец-к1н
5 жыл бұрын
Я тожэ пытаюсь понять
@Lil_Dances
5 жыл бұрын
просто игрушка, как и двигатель стирлинга..
@АлександрЖданов-ф9ю
5 жыл бұрын
Клацает прикольно )))
@chukchuk4679
5 жыл бұрын
Этоже сколково
@debjitdas9430
6 жыл бұрын
That was mind blowing
@tangodigitalsystems
6 жыл бұрын
This is not a tutorial, this is only a video of production...
@HilbertXVI
6 жыл бұрын
Tango Digital Systems Who said it was a tutorial?
@deepakrathor2195
6 жыл бұрын
+Hilbert Black (No. XVI) pf
@dantefitti6678
5 жыл бұрын
You want too much ... but it would be nice!!
@vincenthernandez2642
6 жыл бұрын
It’s amazing what you can do in a small shop or home garage...
@naguara6554
6 жыл бұрын
like si no hablas inglés pero ves el video
@danielosorio9919
6 жыл бұрын
Brandon Ramírez sabes que programa usa para diseñar el modelo ?
@naguara6554
6 жыл бұрын
Daniel Osorio nose
@johnnowakowski4062
5 жыл бұрын
"Billy, what are you doing down there?" "I'm making a solenoid engine mom". "Well don't poke your eye out"...
@premman6052
6 жыл бұрын
I like your engineering work but I like your workshop more
@berserkersen
6 жыл бұрын
genius! lovely craftsmanship
@MrMd5555
6 жыл бұрын
He made a Hot damn flux capacitor.... great Scott
@Oleg-et7jk
6 жыл бұрын
Super good !!!!
@joerover
6 жыл бұрын
Wow ! awesome job ! but I don't have this professional work shop .... I like it and hope that one work shop myself in the future ! ha ha !
@thomastarasco105
6 жыл бұрын
Omg, I remember that program! Man, that takes me back to middle school tech class (^-^)
@ukaszbrucki7560
5 жыл бұрын
What program is it? :)
@РусланФаррахов-ф2с
6 жыл бұрын
Классно👍 . Прицепи к нему генератор еще для подзарядки ,и электронное управление через тахо датчик.
@daviddaudsr3847
3 жыл бұрын
Frankly I love your good job sir.
@thunglamohumtsoe5710
6 жыл бұрын
He literally owns all the machineries.
@ВладимирМедведев-я4к
6 жыл бұрын
Гениально! Только жаль потраченное время на просмотр.
@_yallamedia3650
3 жыл бұрын
محتوى رائع ومميز ودمتم بكل رقي واجمل بصمة
@Solid3d-Melb
6 жыл бұрын
The electric flux is normal or perpendicular to the coil, hence the rod is able to move through the selenoid.
@Zodliness
2 жыл бұрын
Nice simple design that has potential. I would personally have used a more reliable hall effect, or optical sensor. They'd be capable of switching allot faster than microswitches, which are inherently limited to a maximum mechanical operational switching cycle.
@AaronDimafelixabd020276
6 жыл бұрын
nice tools and equipment i wish i have one
@sumeshsudhakaran6536
5 жыл бұрын
Extra neat work... Full clean&clear.. Keep it up..
@user-pr20
6 жыл бұрын
روعة روعة بدي اعرف مفتاح التشغيل منين اجيب و القطعة البيضاء يلي لفيت عليها السلك هل هي خشب ام معدن ثانية
@abw-yazan8lu4ss1k
5 жыл бұрын
بلاستيك
@fritzwilhelm8258
6 жыл бұрын
You have the coolest toys.....
@leaderspeakusa
4 жыл бұрын
I might have added a grease fitting to the nylon housing/winding assembly so that there would be less friction between the steel shaft and the winding. Just my opinion.
@joewoodchuck3824
4 жыл бұрын
I was rather concerned when he hand held work pieces in the drill press. It's a good idea to use a reverse biased diode across the coil to prevent back emf when coil current is interrupted. Nice project overall.
@haakonpad
5 жыл бұрын
Are there any actual benefits to using a solenoid engine over just an electric motor? (Other than the fact that it looks much cooler)
@svenssonefternamn7044
6 жыл бұрын
Of course Everybody has all this Heavy machinery
@MacStrange
5 жыл бұрын
Great work!
@mdtarique3199
4 жыл бұрын
This is real science skill
@paulmorrey733
5 жыл бұрын
Great project Thanks
@sumeshsudhakaran6536
6 жыл бұрын
Extra decent job... Awesome
@danielkuva7966
5 жыл бұрын
Love watching this stuff!!
@peenasexy
6 жыл бұрын
Amazing job sir .. wow great work done
@АлександрЕрмаков-Блаженный
5 жыл бұрын
Прекрасно,так ток на корпус непроходит,осталось только металлическую гильзу в катушку впрессовать для долговечности
@dumbcowboi8803
5 жыл бұрын
im glad its no a 10 min video i liked
@vanadukeworrior22
4 жыл бұрын
What are you using at the start to make your blueprint?
Пікірлер: 1,2 М.