Maybe not the focus of your channel, but I would be really interested in an episode about making drawings by hand. As someone who was only thought to go from 3D to 2D, I find it hard to wrap my head around designing things in 2D. Paper being even more unforgiving.
@InheritanceMachining
2 жыл бұрын
I am definitely trying to find a way to work something in like this. I'm not an expert and have honestly forgotten most of my training. But I may still be able to come up with something
@briannorris246
2 жыл бұрын
This is a video I would love to see. Brings me back to the high school mechanical drawing classes I took.
@cschwad559
2 жыл бұрын
I took an online drafting course twelve years ago which improved my drawings dramatically.
@Jessen_2002
2 жыл бұрын
I would love to se that too
@almostanengineer
2 жыл бұрын
I actually think this kind of video would fit in well, this channel seems to be leaning towards ‘vintage’ machining techniques, and part of that would be drafting.
@huenchenmarkt188
2 жыл бұрын
This new channel is made with so much love and passion. I love how even the old office chair is used. Can not wait for the next video. I am an engineer from Germany and will recommend this channel to my fellow "Bastler-Kollegen".
@InheritanceMachining
2 жыл бұрын
Thank you so much! I'm so glad to be back in front of these machines and to share my journey. Thanks for the support!
@Dusty_Ford
2 жыл бұрын
I have no experience with machining but I've found joy in watching it, and during the time This Old Tony isn't uploading videos it's awesome watching you're videos! The quality and care put into the machining and video editing just makes a great experience.
@InheritanceMachining
2 жыл бұрын
Thank you for the kind words! I can relate to missing ToT. He's my OG favorite channel since about 2017. He took a very long time off a while back so I'm happy he's managed to make somewhat of a comeback.
@original-benandez
2 жыл бұрын
Your videos are so expertly curated and narrated, a real joy to watch :)
@InheritanceMachining
2 жыл бұрын
Thank you so much! I'm glad you are liking them
@lucasrock1290
2 жыл бұрын
future tip, don't use a drill chuck to do any side-load operations like milling. they're fine for plunge cutting, counterbores and drilling but that's it. could destroy your drill chuck and make a nasty mess. keep all the load up into the drill chuck.
@InheritanceMachining
2 жыл бұрын
That's a really good point. My little mishap with the t-nuts definitely showed me how bad that could be. Thanks!
@lucasrock1290
2 жыл бұрын
I look forward to seeing more of your projects! I really like the video production and your shop is very impressive!
@InheritanceMachining
2 жыл бұрын
@@lucasrock1290 thanks, Lucas!
@swissalmonds2775
2 жыл бұрын
Glad someone noticed it too👍 best to stay safe and use a collet!
@willandrews4762
2 жыл бұрын
Don’t stress the burnt up endmills too much. Even very experienced machinists still kill there fair share of endmills. Keep up the awesome work. I’m really enjoying the videos!
@InheritanceMachining
2 жыл бұрын
Ah good to know! Thanks for the support!
@LeeCarlson
11 ай бұрын
Regular folks say "If it ain't broke don't fix it." An engineer/machinist says "If it ain't broke it doesn't have enough features."
@c4t4l4n4
2 жыл бұрын
Darn, a cliffhanger at the end of the video. You are testing my patience, 😃 as this is becoming one of my favorite channels. What I very much enjoy are the side projects needed to do in order for you to complete the main projects. Gradually you'll have a smoothly running shop (one can hope), plus you'll have gained so much experience along the way.
@InheritanceMachining
2 жыл бұрын
haha! The side projects are both a blessing and a curse (as you say). But there's no avoiding them either way. Thanks!
@criggie
2 жыл бұрын
@@InheritanceMachining I've heard it called "yak shaving" at the first level, but not sure what you call it when the second and deeper layers kick in. Keep it up - your presentation and humour are great !
@InheritanceMachining
2 жыл бұрын
@@criggie Ha! I like that! Thanks!
@almostanengineer
2 жыл бұрын
@@InheritanceMachining I can imagine it can be rather frustrating when you have to do a side project, to complete the main project, but including them is actually really good, it shows the entire process, a more realistic view of machining. 😊
@InheritanceMachining
2 жыл бұрын
@@almostanengineer that was my hope! Thanks!
@hardtailchop
2 жыл бұрын
Oh man, I’m loving this project so much. Despite owning a mill and lathe, I’d really struggle to make a tool of this quality with my smaller benchtop machines so I’m kind of living vicariously through your wonderful films. Thank you for being so generous with your time and bringing the whole internet along for the ride 👍
@InheritanceMachining
2 жыл бұрын
Even with smaller machines I think you could still manage, just might take more passes and patience. I'm glad you are enjoying them though! I'm having fun making them and sharing the projects.
@athomist
2 жыл бұрын
That rotary table is a beauty.
@howder1951
2 жыл бұрын
Nice work, I like your design, the way you incorporated the OD for the squareness checking nose is quite clever. Cheers!
@InheritanceMachining
2 жыл бұрын
Thanks! I figured one more option wouldn't hurt. This one will let me check squareness for shorter parts where the ball end on the rod will be kind of limited. I also learned I can use a ball bearing against the chamfers leading to the arm pocket.
@jasonl.4403
2 жыл бұрын
I've watched all of your videos. They are great. Gives good insight to how someone truly begins. I didn't inherit machines but I started out with 3-in-1 200 dollar machines and worked my way up. I ran into alot of problems refurbishing and just learning the trade. Brings back memories. You're doing an outstanding job. Keep up the good work.
@InheritanceMachining
2 жыл бұрын
We all have to start somewhere, but I know I'm beyond fortunate to have inherited what I did. Trying to make the best of it though. Thanks for the support!
@JayRussellDuramax
2 жыл бұрын
Seeing the rotary table used like that is SO awesome! I can definitely see how you'd feel like a human CNC machine after doing something like that. Awesome work so far, and I'm excited for the next video!
@InheritanceMachining
2 жыл бұрын
Thanks, man! One of the cooler operations I managed so far
@brucematthews6417
2 жыл бұрын
I really like the pacing of your videos. It's a nice blend of seeing the process without dragging it out and making me want to skip to the more important points. You're also giving me ideas for projects in my own shop. I need a proper surface gauge of my own....
@InheritanceMachining
2 жыл бұрын
I appreciate you saying that. We're working really hard to keep them enjoyable the whole way through. So thank you for noticing! Also, I'd recommend this project
@MattysWorkshop
2 жыл бұрын
Gday, beautiful job and I honestly think it’s worth the time to surface grind the components, the rotary table is definitely industrial, brilliant job mate and looking forward to seeing part 2, cheers
@InheritanceMachining
2 жыл бұрын
Thank you! Working through the last pieces now
@SchysCraftCo.
2 жыл бұрын
Very nice job. Hopefully you get great use out of it for many years to come my friend. Keep up the great craftsmanship and hard work my friend. Keep making. God bless.
@brycejeannotte7699
2 жыл бұрын
It has been a long time since I have seen anyone draw a plan on a drafting table. Very coo. This looks like it is going to be another great project.
@InheritanceMachining
2 жыл бұрын
It's a fading art for sure. Thanks for watching!
@PatrickHoodDaniel
Жыл бұрын
I am thoroughly enjoying these videos!
@horvathbenedek3596
2 жыл бұрын
"Apparently they are hardened" I'm no machinist, but I felt that. I ruined quite a few drill bits on incorrectly normalized knives.
@InheritanceMachining
2 жыл бұрын
it's an awful feeling isn't it?
@fullmetalpenguin
2 жыл бұрын
I have to say, If I had a surface grinder I think I would also use it on every part for which it was remotely applicable. When you have a cool tool, you use the cool tool. This is the way.
@InheritanceMachining
2 жыл бұрын
This is the way indeed
@Bradley-Rowe
2 жыл бұрын
Well done sir. As a machinist myself and a life-long-lover of well produced, informative and entertaining KZitem videos, this was a treat. I’ve been catching a few videos of yours here and there and I was skeptical at first but you’ve shut my doubts down. Youre skilled, knowledgeable, and obviously excited about the trade/hobby and it shows. Color me impressed.
@InheritanceMachining
2 жыл бұрын
Thank you very much! While there are a few things I know, I recognize there is so much more that I don't. So I'm definitely not trying to give off any sort of "expert" vibes. Just sharing my learning process
@Alteisen_
Жыл бұрын
After watching only 2 videos I really appreciate your honesty about things going wrong. Passsing over a bunch of virtual end mills from Munich, Germany... 🙂 Markus
@InheritanceMachining
Жыл бұрын
😁 Thank you Markus!
@phillipnichols4125
2 жыл бұрын
Loving the channel! I’m no machinist but I do enjoy learning. Can’t wait for part two!
@InheritanceMachining
2 жыл бұрын
Thank you!
@Belvedli
2 жыл бұрын
I always find it impressive what sort of interestingly shaped parts one can make on manual machines! Great work!!!
@InheritanceMachining
2 жыл бұрын
Thanks! Yeah it takes some thinking and planning, though this is pretty simple relatively speaking. I'd like to find an excuse to make some spiral stuff!
@Belvedli
2 жыл бұрын
@@InheritanceMachining I will be looking forward to that spiral...
@AnonOmis1000
2 жыл бұрын
Are you holding endmills in a drill chuck? That's a big no no (at least as far as I'm aware)
@InheritanceMachining
2 жыл бұрын
Yeah thats a bad and lazy practice, as I learned on this project. I'll be using actual tool holders from now on
@zachbrown7272
2 жыл бұрын
dude, you're my favorite machining channel now. Keep it up!
@InheritanceMachining
2 жыл бұрын
Awesome! Thank you!
@stansans50
Жыл бұрын
Cool that you still use an old drafting table and mechanical arm. Thank you for the info you share in your videos. 👍
@InheritanceMachining
Жыл бұрын
My pleasure!
@GarageKei
Жыл бұрын
In the words of Brad Pitt from the movie "Seven". "What's in the **BLEEP** box?"
@mkegadgets4380
2 жыл бұрын
Once again another beautiful project in the making. I always want to make my own surface gage but I have three of them. And just trying to give them away is a lot harder than you would think. Looking forward to the next parts. Love the side projects.
@InheritanceMachining
2 жыл бұрын
I know how that can be. There are a lot of things I think would be cool to make but I don't really need more of. Thanks for watching. I appreciate the support!
@Willytg7
2 жыл бұрын
Agreed... Also if you are trying to give away a surface gage, I am on the student Baja SAE team at NCSU (we work in the same shop and share tools with the Formula SAE team too, both of which are university clubs that build performance cars to compete against other universities) and we do a ton of machining for our car and could really use a surface gage if you want to donate one (our team, as all baja sae teams, are not for profit and rely on donations). Also I know this is a wild request and super random but figured I would give it a shot lol
@InheritanceMachining
2 жыл бұрын
If there is any cause worth donating to in engineering it’s Formula SAE and Baja. In many schools it’s the only hands on experience they can offer. I’m an FSAE alum myself
@alex4alexn
2 жыл бұрын
I would have stopped after that second surface grind, what a beautiful part and skill to make it!
@InheritanceMachining
2 жыл бұрын
Thank you very much!
@nickbrutanna9973
Жыл бұрын
Rule #1 is that it should WORK PROPERLY. Rule #2 can be "make it look elegant, as well". 😛 I know, you probably assumed #1, but that's not a good idea. Too many idiots -- architects, cad/cam people, etc., think "lookin' GOOD!" is the be-all-end-all of design. "Screw functionality".🙃🙃🙃🙃 God I envy you for having the training and access to this stuff. I'd love to be as good with metal as I know I could be... Knowledge work and computer work are the height of "human skill", but working in metal... it's kind of like doing architectural stuff and woodworking -- there's a really significant FEELING to creating physical objects YOU devised or made. And fine machine work is the ultimate in industrial level skills.
@michaelrice500
2 жыл бұрын
I would consider this my dream shop; everything I could imagine ever needing. Few newbies realize that once you have the machines, you need the collets, mills, indicators, parallels, rotary tables, etc. which will probably equal or even exceed what you paid for the thing that makes the noise. You've got a wonderful thing here, sir; you've chosen a superior grandfather!
@InheritanceMachining
2 жыл бұрын
This couldn’t be more true. I have no doubt the tooling in this shop far exceeds the machines in value. All the more reason to make the best of the situation that’s been give to me!
@michaelrice500
2 жыл бұрын
@@InheritanceMachining He'd be proud, I'm absolutely sure. Even the drafting machine is top shelf; such a joy.
@InheritanceMachining
2 жыл бұрын
@@michaelrice500 Thank you!
@EleanorPeterson
Жыл бұрын
Side projects? Ooh, me too. I'm so easily distracted. Looking things up in a proper old-school printed-on-paper reference dictionary can take me ages. Example: Starting with 'Is an octopus left- or right-handed?', I can soon find myself raging at motoring journalists who incorrectly call the Bugatti Chiron - pronounced 'kye-ron', from the Greek - the Bugatti 'sheer-on'. Yep, despite what their rich owners think, it's 'kye-ron' with a hard 'c', as in chimaera, chemistry, charisma, choir, chorus, and Charon, the Ferryman... Like Charon, Chiron is a character from Greek mythology, but he has nothing to do with my original search for hot octopus data. Although, oddly enough, the old Greek dish 'calamari' (from kálamos) is based on cooked squid... Such side projects are harmless fun, but your tea tends to go cold. ☕ I'm the same when it comes to watching KZitem videos. I only arrived at this one - splendid though it is - as the fifth step on from my initial desire, which was a video about the mounting of cameras on kites in order to take aerial photographs. Anyone who can guess correctly the four other videos I watched on the way here wins a Bugatti Chiron and a £100,000 prize... 😁
@DaleKallio
5 ай бұрын
Yikes!.. I grow in confidence with my tooling. Is this a dual purpose video with a secret tooling stress test? What about a real diamond🤔?.. Just raid the nightstand.. Right?
@SollowP
11 ай бұрын
7:50 "Optional squareness comparator surface" I don't think I've ever seen you use anything other than the curved edge on the surface gauge when measuring squareness in your other videos.
@davers1610
Жыл бұрын
Out of interest is it a drill chuck you're holding the small endmill in? Not an attack, interested as ive never dared even when stuck. Love your videos, have a bone to pick with you though.. Once I saw them I realised I needed a surface grinder.. Its made my shop very tight... 🤣 Keep up the videos.
@lanceroark6386
2 жыл бұрын
2:15 “stable” C-Clamp
@rockroosterfootwearmarketi5378
2 жыл бұрын
Hi, this is Rock Rooster Footwear. We sent you an email about cooperation inquiry. Would appreciate it if you could have a check. Thanks!
@JohnDlugosz
Жыл бұрын
I wonder if your Grandfather had contacts whereby he would discover deals in equipment. That is, be bought the rotary table because it was too good of an offer to pass up. I wonder if it might have been a return? Remember the T-nuts that didn't fit? Maybe the original buyer sent it back unused.
@suffocated
Жыл бұрын
People like this who are so meticulous and productive should be psychologists who mange people's anxieties. To start something from scratch, plan it out, work through all the errors/misplanning(the anxiety part) and carrying through regardless to a finite product that you can hold in your hands. That is either psychosis or a cure for it.
@kentuckytrapper780
2 жыл бұрын
👍👍👍
@Arrica101
Жыл бұрын
The fact there isn't a cnc machine in sight is so refreshing. I love seeing everything done by hand and properly rather than just having a machine do it all for you
@Todestelzer
Жыл бұрын
I used normal mills as well but after using a CNC I don’t want to go back. Next big project should be a CNC mill mod :-)
@dfleon75
2 жыл бұрын
👍
@nigelnightmare4160
9 ай бұрын
Dear IM: 7:30 Just make a couple of smaller tap wrenches of the same design so you have a full set for all tap sizes. 13:41 I take it that is your Grandfather in the ID photograph, Nice that he is watching over you still.
@douglaspierce7031
Жыл бұрын
If your part doesn't extend past the center of the vice, all your clamping pressure will only be at the point closest to the center of the vice. That's why your part lifted up. Put a block of equal thickness on the other side of the vice to balance it out. Also, it's not good practice to hold endmills with a drill chuck.
@torchmd
Жыл бұрын
Why not cut the ends of your round stock off on the bandsaw? You would hav metal for another small project, no broken end mill, maybe some time left. Maybe not, but… maybe.
@dutchylt
9 ай бұрын
Aren't the Kurt vices anglock vices? To prevent the stock lifting? Or is yours too early to be anglock?
@skinny7010
5 ай бұрын
Good stuff! Thanks for your energy and thanks for sharing all this. The manual drafting really brings me back.
@jimrichey5919
Жыл бұрын
I adopted an 18 inch Troyke rotary table... and a 16 inch 3 axis rotary table. Talk about heavy tools
@theoriginalDirtybill
2 жыл бұрын
a true draftsman!! i havent used a drafting machine and vellum in 30 years!!
@InheritanceMachining
2 жыл бұрын
I wouldn't say that... But I try! It's more fun this way
@Dirk-Ulowetz
Жыл бұрын
T-Nuts are normally not hardened, but it is a toolsteel. Very hard to work with. The turning speed was too high for this material. You should look to a table with the cutting worthies.
@HmmmmmLemmeThinkNo
3 ай бұрын
Based on what I know of you, and your grandfather based on your stories and his tools, if he had had the resources you do at your age, he'd have been making on youtube too. Weird thing for a stranger to say, I know XD
@mwilson308
Жыл бұрын
No such thing as TOO MANY features. . . MORE features . . feature rich i say :)
@blackoak4978
Жыл бұрын
Not sure if this will come up later in the video, or if you took it into account but didn't mention it, but the first two times you went to the surface grinder you faced the risk that your surfaces were not square. Coming off the lathe from the second facing operation, did you use the first faced surface as your reference surface? If you used the second one there's a good chance that the sides of the part were not square to the base. Then when you went to the surface grinder for the sides put the piece directly on the magnetic chuck without any referencing to the two surfaces that you already ground. I guess this is fine if you do not have a reliable working vise to put on the surface grinder, but I would think that getting a vise would then be a higher priority than the piece you are making here. Ideally you would use a good vise in the surface grinder to ensure that your third surface is referenced to the first two, then you can use that directly on the mag-chuck as the reference surface for the opposite side
@in4merATP
Жыл бұрын
One homes in, and one hones. Honing in [sic] is an old prospector sitting in a porch swing, arguing with himself as he sharpens his whittlin' knife, with the entire scene set into the nose cone of an in-flight ICBM whose navigation he is indirectly directing.
@johncamp7679
Жыл бұрын
From what I’ve seen on your videos so far, it seems any accessory for these tools all need adjusting. You need these tools to install the accessories. It’s kinda cool really.
@P_hilly
Жыл бұрын
I’ve worked both on boards and on CAD- put the pencils away
@veselinlazovic3997
5 ай бұрын
and for the breakfast we have sandwiches and bananas polished on surface grinder. At this point why not.
@lestertapaya4263
2 жыл бұрын
U r so lucky to inherit this tools from ur grandpa... Im a machinist from the Philippines
@InheritanceMachining
2 жыл бұрын
That's great! I really is fortunate... and hasn't quite sunken
@thomasmedlin2881
Жыл бұрын
Why are you using an Albrecht chuck for milling? Where you are cutting the slot.
@josseman
2 жыл бұрын
As always, great video! I really enjoy watching them and it motivates me to do more projects on my minilathe and minimill.
@InheritanceMachining
2 жыл бұрын
That's awesome! Glad to hear that. Thanks!
@craigtate5930
2 жыл бұрын
So good to see a manual drafter again
@InheritanceMachining
2 жыл бұрын
I can definitely appreciate the speed and ease of designing with CAD, but there’s a physical element to drafting that makes it more fun at times
@leandro1698
2 жыл бұрын
10:02, an amazing tool!! bien hecho!!
@InheritanceMachining
2 жыл бұрын
haha thank you!
@lumpygasinavacuum8449
Жыл бұрын
As a tool maker I prefer checking square with the front side radius of the surface gage and an indicator on the post..
@WhozaCardoza
9 ай бұрын
Can you do a video on some common mistakes, or safety concerns when machining? Would be cool
@PaulsGarageProjects
2 жыл бұрын
I like to think of each destroyed endmill as a lesson learned. Apart from running your mill in reverse - mental block with that one.
@InheritanceMachining
2 жыл бұрын
In this case a pricy lesson for sure.
@chrisstephens6673
2 жыл бұрын
@@InheritanceMachining perhaps another side project an end mill sharpening device? Simple or complicated can do the job adequately, and saves wasting all that lovely HSS.
@InheritanceMachining
2 жыл бұрын
@@chrisstephens6673 I'm toying around with something in the back of my mind. I'd like something I could do lathe tooling with as well
@cschwad559
2 жыл бұрын
DOC is way too deep for your HSS end mills. Believe me, I learned the only way (the hard way). Face mills with carbide inserts will let you do that but feeds and speeds are super critical.
@InheritanceMachining
2 жыл бұрын
Yeah I learned that here as well. The length of the mill deceived me, but it’s obvious now that is only for side milling.
@eformance
Жыл бұрын
I'm watching this and thinking about the timeline of when you would have been a kid in the machine shop. The irony is that it was 18 years ago when I put together the first iteration of *my* machine shop. Now I have a frame of reference for when you were a "kid" 😁 The thing is, it wasn't that long ago to me, some of the memories have gotten fuzzy, but I remember that first commercial suite very well. I even have the Polaroids I took before moving in sitting in the drawer next to me 😄
@RedDogForge
Жыл бұрын
starting with a round so that your bumpers intergal. clever :)
@bigjame26
2 жыл бұрын
when you surface grind your plates, try angling them a bit, youll get a nicer finish
@Shildifreak
Жыл бұрын
Great work. I've been binge watching your videos all day. Also I think there is an n to many in your "hobbymachinist" video tag.
@InheritanceMachining
Жыл бұрын
Doh! Thanks for that haha
@jdsstegman
Жыл бұрын
Worth every minute.
@trentwong4437
Жыл бұрын
Phase 2 rotary tables have metric t slots, I had the same issue, took a carbide endmill and opened up the t slots so I can use standard t nuts.
@denniscarnahan7670
Жыл бұрын
It's pretty nice your grandfather had many items he seemed not to use but had just in case for someday later.
@chrisyu98
2 ай бұрын
Wait a minute...surely your grandfather left you a surface gauge in all that?
@markkrick8602
2 жыл бұрын
As to your fancy tool marks... It may be worthwhile to check out making a "Barleycorn" pattern. This is a series of intersecting circular grooves possible around a diameter or in a linear pattern. To the best of my knowledge, this an ornamental woodturning process. Done well it's amazing. Love your stuff.
@InheritanceMachining
2 жыл бұрын
Thanks! I'm having a little trouble finding anything with a consistent pattern by that name. Is there some other name for it maybe?
@tomeyssen9674
2 жыл бұрын
Ah yes, the K&E Slde rule and Vemco drafting "machine". Hey, nice job....pretty. Thanks -Tom
@InheritanceMachining
2 жыл бұрын
You know the equipment well 😁 thanks!
@magnustangen6269
Жыл бұрын
Jut found your channel and i really love it, kind of a more straight to business this old tony
@f.hababorbitz
2 жыл бұрын
My luck was to use some mystery metal, that turned out to be air hardening tool steel. And even simple machining operations (I still dry cut most things, and use carbide) can cause self hardening. I acquired a heat treat furnace from Paragon kilns. Their knife maker kiln was more costly then their glass maker kiln, but had all the same thermal capabilities, only difference was the door hinged on the side vs bottom. So I use this to anneal heat treated items that need modifications, and then heat treat them again. I also acquired a Rockwell hardness tester, which I use more often then you'd think. That was a China made thing, and damn accurate. I'm really surprised that since your grandfather had a surface plate (looks just like mine from Enco) that he did not have a surface gauge, unless someone stole it. Also how was that rusty round bar marked so you could tell it was heat treat tool steel? I took the easy route and got a used surface gauge from eBay. I'm still learning how to use a surface gauge, as I got the surface plate from Enco 30 some years ago, when they had it on sale (24x36 no ledge with stand) for $200. Only the last few years have I found projects where it was needed. Purchased sine plates and Jo blocks, test indicators, to make proper use of it's metrology capabilities.
@InheritanceMachining
2 жыл бұрын
My grandfather got a lot of stuff from Enco around that vintage so may very well have snagged the same deal on the surface plate. I spent many years with him in the shop but never saw a surface gauge anywhere. He did have a height gauge, cadillac gauge, and a few other things. But he never really used the plate much. I cant recall the round bar you are talking about but there was a grand total of 1 piece of stock that was labeled O1 on the original bar code.
@paulmartinez9908
2 жыл бұрын
Are you a mechanical engineer? I’m studying and just finished my fluid dynamics course I graduate next year and fell in love with your channel..spent ten years in the army and got shot in my left shoulder so CAD/Office work helps that shoulder relax but want to get into machining as well because of this..I do leather work that helps, like therapy to me really..anyway thank you for this
@InheritanceMachining
2 жыл бұрын
Thank you for you service, Paul. Yup I'm an ME. Machining may be a good for you for that same reason. Very therapeutic both mentally and physically, though at times there is need to move heavy stuff like chucks and whatnot. But a lot of the bench top style machines are manageable.
@aristovandermeulen7532
Жыл бұрын
Maybe a dumb question bus at around 08.20 min it looked like you free handed the angle, bus I'm pretty sure you didn't, but could you explain how you did it, or did I miss so etching???
@InheritanceMachining
Жыл бұрын
It's somewhat hard to see, but there's a 15 degree angle block under the part. Kind of midway between the two parallels
@ash7324
2 жыл бұрын
13:42 the big OG himself
@InheritanceMachining
2 жыл бұрын
Keep an eye on me 😁
@MrMorbitron
2 жыл бұрын
I looked for it in the comments but didn't see it, so here's my bit. When side milling on a Bridgeport style mill, make sure that your cuts are conventional. That is, teeth turning into the direction of travel. Climb milling will pull the tool forward and into the work because torque is being applied into the direction the backlash. That said, you've got some serious skills my man. I found this channel yesterday and I'm almost halfway through your video back log so far. Keep up with the high quality videos. This is excellent work 👏🏻
@InheritanceMachining
2 жыл бұрын
Great point! I think I've mostly been able to get away with this so far because my ways are snug and my backlash is adjusted pretty minimally. But that doesn't make it ok 😉 I appreciate the support. Welcome to the channel!
@TrPrecisionMachining
2 жыл бұрын
good video
@just.jose.youtube
Ай бұрын
Is that grandpa chilling by the DRO? :)
@tasror
2 жыл бұрын
Relatively new subscriber, but wanted to say great work on the channel mate. 15.4k subs at the time of writing, and I can see that going to a silver play button in no time. Now I get to go check the back catalog of vids :)
@InheritanceMachining
2 жыл бұрын
I really appreciate the support! Thank you!
@DudleyToolwright
2 жыл бұрын
That was some beautiful work. I really enjoyed the video.
@InheritanceMachining
2 жыл бұрын
Thanks a lot!
@scott98390
2 жыл бұрын
OH MAN I haven't touched vellum and a drafting table since 1985... have you ever used the straightedge that has the wires on both sides to keep it parallel?
@InheritanceMachining
2 жыл бұрын
I have not but I've always had an interest to play with one
@vinf.4197
Жыл бұрын
Enjoy your videos very much. Not a machinist by any stretch but find them informative and entertaining. Every so often in one of your videos I see what looks like a lockout tag with a picture on it (on the DRO I believe). Is that your grandfather?
@InheritanceMachining
Жыл бұрын
Thanks, Vin. Yup that's my grandfather. That tag has been there as long as I can remember. Only fitting that it stays there for good luck!
@provostkhot
Жыл бұрын
Can I ask a stupid question? I love Your work, but why do You have a picture of Janusz Rewinski on Your mill? ;)
@InheritanceMachining
Жыл бұрын
😂 Thanks
@RedDogForge
Жыл бұрын
im not at ALL jealous of that rotary table...nope, not me... heh
@BurtonsAttic
2 жыл бұрын
Because why not! I see a VFD...Great work, enjoyed the Rotary Table.
@InheritanceMachining
2 жыл бұрын
As is always the way haha you have a keen eye!
@BurtonsAttic
2 жыл бұрын
@@InheritanceMachining I have one like that, it's a little slow and programming it is a little weird but it's work fine for a few years now with remote power switch box and push button start.
@BurtonsAttic
2 жыл бұрын
Slow to boot that is
@InheritanceMachining
2 жыл бұрын
@@BurtonsAttic Gotcha. I don't necessarily need it for variable speeds. It's just a hell of a lot cheaper and more efficient than a rotary phase converter.
@BurtonsAttic
2 жыл бұрын
@@InheritanceMachining That a misconception a lot of people got from my videos! I mainly use VFD's for the same reason. I run at 60Hz all the time and only use the variable speed for tapping mostly which it's very handy for. Modern VFD's are very efficient, so the little bit of lose is an unnoticeable trade off.
@brianpowers634
Жыл бұрын
You seem to be putting your endmills in a drill chuck ?
@JoeB55
Жыл бұрын
You do nice work but a word of advice don't use an endmill in a drill chuck
@jgredy7
Жыл бұрын
i'm curious what the 15 degree bevels on the bottom are for? are they just for looks? maybe to have less surface area in contact on bottom? or is it maybe to rest on top of something round? Thanks in advance! Great Videos by the way!
@InheritanceMachining
Жыл бұрын
It's a little bit of all of that. It also limits the contact patches to narrow areas on the edges and less susceptible to rocking. Though a 3 point contact would be best. Thanks!
@deckum23
2 жыл бұрын
Well, youtube missed me on this video, only found it 14 days after upload, I see you went with a vfd for the lathe, clough42 has some videos on how to set them up if you're having trouble.
@InheritanceMachining
2 жыл бұрын
Oh no! haha no worries the vids are there forever. I did have some issues with the VFD integration, but more on the electrical side than the actual VFD. Running great now!
@dougaldhendrick3497
2 жыл бұрын
A little surprising there are still some old school drafting tools around, and in use!
@InheritanceMachining
2 жыл бұрын
😁
@SuperAWaC
2 жыл бұрын
Once you have a surface grinder, every project must be surface ground. It is the Machinist's zen garden.
@InheritanceMachining
2 жыл бұрын
Running the surface grinder is a good place to zone out. It’s almost like meditation
@ernstboyd8745
2 жыл бұрын
on these machining projects I always jump ahead to the end to see what it is that they are making I wish the video makers would show the overall design BEFORE the details just me?
@InheritanceMachining
2 жыл бұрын
Believe me, I would have shown it if it was complete. 😂
Пікірлер: 491