Who knew all this went into knife-making. Amazing video. Thanks for sharing, you work hard at this and I watch it over and over.
@FlatRiverKnives
7 жыл бұрын
Thank you.
@GunnySGT1911
7 жыл бұрын
I love the finish on that. Beautiful work. Thanks for sharing your videos.
@FlatRiverKnives
7 жыл бұрын
Thanks for watching. : )
@patsin6873
6 жыл бұрын
Cleanest workshop of all the 300 videos I saw (and well equiped), very efficient working also. Love the sandblast finish and the clear character of the knife. Pleasure to watch.
@FlatRiverKnives
6 жыл бұрын
Thanks for taking the time to watch and comment Pat Sin. I appreciate it.
@SoloVagant
7 жыл бұрын
That's a work of art mate Thanks for showing us your craftsmanship......
@FlatRiverKnives
7 жыл бұрын
Thank you Dave. 😊
@dustintaylor2843
7 жыл бұрын
Wow! I love this knife. I've been watching tons of videos on knife making because I've wanted to try my hand at it. I need to take the plunge! Great job.
@FlatRiverKnives
7 жыл бұрын
Thank you Dustin. If you do take the plunge, be careful. Knife making is very addicting. : )
@rastiuhricik1660
7 жыл бұрын
Fantastic survival blade, I love this knife profile👍🗡!
@FlatRiverKnives
7 жыл бұрын
Thanks my friend.
@randomredneck2051
Жыл бұрын
Ok of all the things i have to say.. I love this guys taste in music like it is amazing
@simonherde6982
7 жыл бұрын
Very good video, quite liked it. You have a very cool workshop by the way. I hope your channel grows and you make more videos.
@FlatRiverKnives
7 жыл бұрын
Thanks hes. I will definitely be making more videos. : )
@jun1orbaitor44
7 жыл бұрын
You made a GREAT BLADE! It looks to me in the comments, that possibly inexperienced people keep trying to give an expert advice! Keep doing what you're doing, it's fantastic. Future buyer here, if possible. : )
@FlatRiverKnives
7 жыл бұрын
jun1orbaitor44 Thank you sir. 😊
@smu1129
7 жыл бұрын
Very nice, I never thought the blueing would suit the handle material like that. Oh well, one another thing to try out. Thanks and looking forward to seeing more.
@FlatRiverKnives
7 жыл бұрын
Thanks Smu. I think the best way to learn is to always be trying out new ideas.
@Sharpbevel
7 жыл бұрын
Wonderful video. Meticulous work. You're a true artist. Not sure I've seen bluing after blasting before. Cool!
@FlatRiverKnives
7 жыл бұрын
Sharpbevel Thanks my friend.
@parryreposte6585
7 жыл бұрын
this video has such a film noir feel, the way its lit. It's the Eraserhead of the knife making videos.
@FallHuntsman
2 жыл бұрын
Awesome build, looks very much like a RAT-7 or an ESEE-6.
@TheSenseiKai
7 жыл бұрын
I'm in love with it. Brilliant work!
@FlatRiverKnives
7 жыл бұрын
Thank you for your support. : )
@user-jr2ue9nu6y
7 жыл бұрын
Wow...awesome knife making and you can see you have an awesome workshop.
@FlatRiverKnives
7 жыл бұрын
Graeme Guerrilla Thanks. : )
@Paid2Win
5 жыл бұрын
Yes, practical and simple - this is all you need. Maybe leave a bit of the tang on the bottom exposed in case you ever have to smack it with a mallet or branch. Brass caps are also used but it's a hell of a lot easier to just leave some hangin' out
@Gryphon2026
5 жыл бұрын
Yep I agree. That's a really good idea about the tang.
@AbgehaX
7 жыл бұрын
great Job. I was surprised you just started this channel because everything seems to be made very professional
@FlatRiverKnives
7 жыл бұрын
Thank you. I appreciate it. I've wanted to make a channel for quite some time, but the timing wasn't right until recently. : )
@AbgehaX
7 жыл бұрын
like I said, your work Looks great and very experienced! looking forward to see more of you ;)
@FlatRiverKnives
7 жыл бұрын
Thank you.
@SmiTTyy-sh8nc
7 жыл бұрын
That's a great looking knife !
@FlatRiverKnives
7 жыл бұрын
SmiTTyy 1967 thank you. : )
@DiesInEveryFilm
6 жыл бұрын
Nice work dude thanks for sharing 👍🏼👍🏼👍🏼
@FlatRiverKnives
6 жыл бұрын
Thank you Diesineveryfilm Customs. 😉
@ВадимКузнецов-е4з
5 жыл бұрын
... отличный тесак получился,я тоже для своих ножей рукоятки фанерные делаю, молорик продолжай экспериментировать!!!
@senolyildiz5917
7 жыл бұрын
Great job, with great machinary and talent.
@FlatRiverKnives
7 жыл бұрын
Thank you. : ) It takes a lot of practice, but it's worth it.
@jerrystark3587
6 жыл бұрын
I just came across this channel. Good videos! This survival knife is spot on. It has the strength for chopping and prying, a blade that can be useful for all but the most delicate tasks, and a solid grip. I would be proud to make and use such a knife. Thanks for sharing...
@FlatRiverKnives
6 жыл бұрын
Thank you for the kind words Jerry Stark. 😉
@RustyGunn7
6 жыл бұрын
Thank you. This is a nice video. Cool knife, too.
@FlatRiverKnives
5 жыл бұрын
Thanks for watching, Rusty.
@ethan.D
4 жыл бұрын
Do you sell these by chance? Looks like a fantastic knife
@gfrank8058
5 жыл бұрын
Thanks for sharing. Beautiful knife, awesome job. GF1 👍👍👍👍👍👍👍👍👍👍👍👍👍😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😎
@nickabbott8453
7 жыл бұрын
That is a good looking knife!
@FlatRiverKnives
7 жыл бұрын
Thanks Nick.
@SAsgarters
7 жыл бұрын
Great looking knife. Always fascinating to watch how people make knives, they all seem to have their own methods. Would love to start making knives myself, but I don't have the tools or the facilities for it.
@FlatRiverKnives
7 жыл бұрын
SAsgarters you can actually make a knife with a cheap angle grinder. I made my first knife with a only a file and a $15 firebrick forge I made. Where there's a will there's a way. 😉
@SAsgarters
7 жыл бұрын
I doubt everyone else in this apartment building would appreciate it. ;)
@FlatRiverKnives
7 жыл бұрын
LoL, I agree. Hopefully you'll have a garage to work out of someday. : )
@jacobalvarado7876
7 жыл бұрын
Absolutely Beautiful Work!
@FlatRiverKnives
7 жыл бұрын
Thank you.
@jamesm3268
7 жыл бұрын
Hey mate, putting the knife in cryo after temper is useless. The blade needs to be submerged while still warm after "quenching" when around 400f. The retained austenite will be fixed in place with that temper cycle and the sub zero cryo won't do a thing. Also you can quench between two thick aluminum plates whilst in the packet. Your knives will be harder and will be dead flat. Nice design and execution mate. Cheers nyatiblades.
@FlatRiverKnives
7 жыл бұрын
James M, cryogenically treating steel after a temper cycle is definitely less effective than doing so directly after quenching, but it still has an effect on transformation. I typically do a short temper prior to cryo. treating. I've actually had knives crack and/or warp due to cryo. treating shortly after quenching. Many manufacturer data sheets specify thin pieces of their steel, or pieces with intricate shapes may be cryo. treated in between tempers. I do plate quench my knives sometimes. I'll be utilizing a plate quench in one of my upcoming videos. Thanks for commenting, and for your interest in my channel my friend. I appreciate it. 🙂
@jukeboxhero1649
3 жыл бұрын
After all that work I reckon it's a $400 knife without the sheath. Fancy. I have to stick to leaf springs which I prefer because of their toughness and availability. Truly you built a reliable knife.
@user-cs3hi8zp7p
4 жыл бұрын
Loooove the gun metal look!!! Super good looking blade!
@antchung2370
7 жыл бұрын
Great work... love it..!'
@FlatRiverKnives
7 жыл бұрын
Thanks.
@showstopper540
6 жыл бұрын
very nicely done and actively responding to questions here in the comments. a small time knife maker myself i enjoy the craft, i really struggle on my handle finish though. need more practice :)
@FlatRiverKnives
6 жыл бұрын
Jonathan Wines, I also struggle with finishing with my handles at times. I can be too impatient sometimes. Thanks for taking the time to comment my friend. Keep on making your Knives. : )
@shanebray9331
7 жыл бұрын
Man I watch videos almost every night and I see you take a lot of pride in your skill Iran’s when you decided to start selling please let me know I’d love to have one keep up the good work
@FlatRiverKnives
7 жыл бұрын
Shane bray thank you. : )
@mistersmith3986
7 жыл бұрын
Boy, that sure is one healthy knife!
@FlatRiverKnives
7 жыл бұрын
mister smith, thank you sir. 😊
@globyois
4 жыл бұрын
Excellent work, my friend. Love that design, too. A bit Schrade-ish.
@lightning4871
5 жыл бұрын
Of all the knife makers on KZitem it seems you are the most professional. Do you sell any of your knives?
@FlatRiverKnives
5 жыл бұрын
Lightning48 No, I don’t. It’s mostly a labor of love for me. Thanks for watching.
@jonpierce8526
7 жыл бұрын
I really like your grinding Jig, I'm going to try that myself
@FlatRiverKnives
7 жыл бұрын
Thanks Jon Pierce. It was a very simple build and it works great. Thanks for commenting. : )
@semco72057
5 жыл бұрын
That is a nice looking knife and I love the way you built it from raw materials to the tool it is.
@FlatRiverKnives
5 жыл бұрын
Thank you, Sidney Mathious. 😉
@toribiotravel
5 жыл бұрын
Que hermoso trabajo, felicitaciones, con tu permiso me voy a hacer uno, gracias por tomarte el trabajo de compartir este video. Saludos.
@anthonyattaway3437
3 жыл бұрын
Love your music playlist dude whats it called? I know most of the songs wanting to know where to find the play list
@BudgetGunsandGearReviews
5 жыл бұрын
I like that blasted finish... I may have to get a cabinet...
@FlatRiverKnives
5 жыл бұрын
Budget Guns and Gear Reviews, it’s worth it. Especially if you’re a more pragmatic individual such as myself. Thanks for watching, my friend.
@Feverdream7777
7 жыл бұрын
I just bought the Schrade SCHF 52 ....nearly identical shape... but your's wins... A2 and flat-grind... soo damn nice.
@FlatRiverKnives
7 жыл бұрын
Thanks Adam. I appreciate your comment. : )
@olblu8746
4 жыл бұрын
Man , what an awsome knife. Great skill, my friend.
@adamjohnson5307
4 жыл бұрын
Gloves near rotary tools. Scary stuff. 😬
@Rozay3296
5 жыл бұрын
Would love to see one of those with cammo scales
@cflinger1979
6 жыл бұрын
Very nice video. Love the finish on that knife. I like another comment I read earlier struggle with my handles. Getting better though through practice.
@FlatRiverKnives
6 жыл бұрын
Thanks cflinger1979. I think the copious hours of practice required can be one of the biggest obstacles one faces while learning how to make knives. Keep on practicing. Thanks for commenting. 😉
@cflinger1979
6 жыл бұрын
It's actually a really fun learning process.
@FlatRiverKnives
6 жыл бұрын
I think you have the patience required to be a great knife maker. 😊
@andrearoscioli6345
7 жыл бұрын
Great job and great video!! 💪💪
@FlatRiverKnives
7 жыл бұрын
Roscioli Kustom Thank you sir.
@vinceruland9236
4 жыл бұрын
Turned out real nice.
@paulie4x1
7 жыл бұрын
Say Heah, What a Beauty. Yup, I really like it. Infact it reminds me of my Rodent 6 which I had mine thinned down from the original .265" thickness down to less than a 1/4" I also had the Top Guard taken off. I had it professionally done at the Busse Custom Shop. It came out Spot on. It now looks like a Ratmandu but on steroids. Infact it's prolly my most Fav's Wilderness Knife. I like to team it with my Mora Forest Exclusive #277. or my Mora 510 as a Neck Knife. I also like to add my 17" Hultafors Bruks Agdor Hatchet because of its compact size and the weight a 1 3/4 lbs head. Makes easy wood processing for firewood. I also just bought a Agawa Canyon 21 Boreal Saw with the Crazy Horse Scabbard that I put the extra Aggressive Saw Blade in it. To exchange saw blades is easy peasy nice and easy. I don't think my tools are a over kill. But I like doing solo trips so I just feel more comfortable knowing my tools will stand up to anything that I might encounter. Again, It looks like you designed yourself a awesome knife. I wouldn't mind having it on my collection. Great Work there Partner.,,. p
@FlatRiverKnives
7 жыл бұрын
paulie 4x Thank you sir.
@paulie4x1
7 жыл бұрын
Flat River Knives. Your Welcome, Sir. You did a Outstanding job on it. Thanx You for sharing it.,,. p
@TheMultisportGeek
5 жыл бұрын
That is so effing cool. What do you need the jumbo size WD40 for? I also like your random music selections.
@FlatRiverKnives
5 жыл бұрын
Brian, it's just cheaper and easier to buy it in bulk. I use WD40 a lot.
@skippy2752
7 жыл бұрын
great looking knife. Very good job. Do you have a vedio showing the build on your bevel grinding jig?
@FlatRiverKnives
7 жыл бұрын
No, but that's a great idea. I've got a knife video I need to finish editing. When I'm finished with that, I think I'll start making a grinding jig video. Thanks for the idea. : )
@heroheroin4718
6 жыл бұрын
I like the process 🤗 thanks for sharing
@FlatRiverKnives
6 жыл бұрын
Thank you hero heroin. 😉
@kristynchuckhenderson3158
7 жыл бұрын
Great Knife!
@FlatRiverKnives
7 жыл бұрын
Kristy N Chuck Henderson thanks for watching.
@gehaddyaragghor8590
7 жыл бұрын
Excelente !
@FlatRiverKnives
7 жыл бұрын
Gracias mi amigo.
@renzov8489
7 жыл бұрын
Keep up the awesome work 👍🏻
@FlatRiverKnives
7 жыл бұрын
Thank you for your support. : )
@tayrelramad
7 жыл бұрын
very nice work... best wishes :)
@FlatRiverKnives
7 жыл бұрын
Thanks Mohamad.
@scotmetcalf2745
5 жыл бұрын
Beautiful blade and beautiful work
@FlatRiverKnives
5 жыл бұрын
Thanks, Scot Metcalf.
@MrRigmunkee1
6 жыл бұрын
In my opinion, this knife definitely stands out.
@FlatRiverKnives
6 жыл бұрын
Thank you Edward Diewold. : )
@omer_dmirr
7 жыл бұрын
i like it. good job.
@FlatRiverKnives
7 жыл бұрын
Omer Demir thank you. 😉
@daviddraper3700
6 жыл бұрын
Great video. Knife making is something I would like to try in the future. I was wondering what you do for the final blade sharpening? Or did i miss it? I have a Lansky myself, with the 5 stones. It works very well. Thanks again for the video. Inspirational for novice and experts alike.
@FlatRiverKnives
6 жыл бұрын
I usually use the same belt grinder seen in the video to sharpen my blades. There's some footage of me sharpening a blade in my second hunting knife video. I also have a Lansky sharpening system that I use for trickier blade shapes. It sure does work great for the price, doesn't it? Thanks for watching David. Sorry for the lateness of my reply.
@andrewhoggett8148
4 жыл бұрын
was waiting for the paper cutting
@ivysinistra
7 жыл бұрын
too many power tools, gabeN please nerf kidding, ofc. Great knife you made there. Handle doesn't really have much shape to it though.
@FlatRiverKnives
7 жыл бұрын
Thanks Copperman. I was shooting for simple and sweet with this blade. : )
@vincek6613
5 жыл бұрын
Would've liked to have seen final sharpening and cutting but cool over all
@paddypete1
5 жыл бұрын
lovely knife,great video,when i made my knife i had to make do with a homemade forge and hand tools,sandpaper and files,it took around 2 days,i could have done with some power tools for speed,however it turned out fine,check it out
@Lawman-196
7 жыл бұрын
nice job brother!
@FlatRiverKnives
7 жыл бұрын
Thank you.
@McGowanForge
5 жыл бұрын
That's a beautiful blade
@outdooraddictionpa8218
5 жыл бұрын
awesome!!
@TheMrWoodsman
5 жыл бұрын
Excellent work, well done.
@stansmith1911
Жыл бұрын
What grit of belt grinder did you use to finish your profile, then what was the next grit, then what was the paper grit progression. Nice knife sir.
@bıçak_knife_messer_tool
3 жыл бұрын
Good Knife.Non Lanyard Hole,Non Spine Jimping And Non Extended Tang/Breaker Pommel.
@brazkie
6 жыл бұрын
I didnt see u quenching ur knife with oil. Instead u used ice. Is that matter to blade toughness??
@FlatRiverKnives
6 жыл бұрын
The knife is made from A2 tool steel, which is an air hardening steel, so no oil is required. Yes, the cryo treatment does help with toughness. Thanks for watching and commenting. : ) Sorry for the lateness of my reply.
@selador11
7 жыл бұрын
I wonder if sealing the foil would go better if you used a print or linotype roller on the edge, instead?
@FlatRiverKnives
7 жыл бұрын
selador11 That's possible, but using a rubber mallet suffices. Do whatever works best for you. : ) Thanks for commenting.
@clint6530
5 жыл бұрын
Wonderfull work !!! Nice vidéo !!!
@FlatRiverKnives
5 жыл бұрын
Thanks, Clint65
@GCOFFROAD
7 жыл бұрын
nice work.. 👍 it
@FlatRiverKnives
7 жыл бұрын
Thank you GC.
@stevenwest1494
7 жыл бұрын
Of all the know making videos I've seen on KZitem, your's is the first I've seen using air drying, over oil quenching in a bath. It's there any preferred reason to this? The dry ice cooling to straighten too is very different. Is this a necessary step to ensure a longer lasting straight blade, that doesn't have weaker points? Great video :) thanks for making it.
@FlatRiverKnives
7 жыл бұрын
Steven West A2 is just an air hardening steel. I use oil hardening steels too, my next video will feature a knife made from oil hardening steel. I typically prefer air hardening steels because they're less likely to warp during quench. The dry ice and acetone cooling bath is not a necessary step, but it helps further refine the grain structure of the steel, resulting in a stronger knife. Thanks for commenting. : )
@jarrettreece240
7 жыл бұрын
all of the prep work you did to the handle scales and then you still just slapped a ton of epoxy on them and had to sand them like crazy. I thought by you're choice of rivets and counter boring that you were going for removable scales like an esee laser strike.
@FlatRiverKnives
7 жыл бұрын
Jarrett Reece utilizing corby rivers and epoxy to secure the handle scales to the tang results in a handle that is far stronger than a handle with removable scales. The epoxy was not used as a means to “cut corners;” it was used to add strength and durability to the grip. Thanks for watching and commenting. : )
@ghosttrail8939
7 жыл бұрын
Nice work.Any chance you would take a custom blade order?
@FlatRiverKnives
7 жыл бұрын
GhostTrail, it depends on what you're looking for. Message me and let me know. : )
@phhdvm
7 жыл бұрын
really eager to get a sandblaster. what brand do you use? Looks like you used 80 grit both times, is that a good general use grit? Is cryo essential for A-2 tempering process? great looking knife!
@FlatRiverKnives
7 жыл бұрын
Peter Hughes DVM my sand blaster is from Harbor Freight. I'm not sure what brand it is. 80 grit is just the media I prefer. I've seen people use much finer media. It just depends on your preference. Cryogenically treating A2 is not necessary, but it is very beneficial to the overall performance of the blade. Thanks for watching and commenting my friend.
@meinefezze
7 жыл бұрын
what does the kryotreatment do? From my point of view i do not see a reason why it should improve the grain structure if the since the mobility of the carbon remaining in the steel should be low/ all the carbides are already bound as chrome carbides. I would appreciate any information!
@KIDLAT80
5 жыл бұрын
Awesome Knife...
@terrytytula
7 жыл бұрын
Great knife and video, one question, what is the purpose of the stainless steel envelope you put the knife in?
@FlatRiverKnives
7 жыл бұрын
Terry Tytula when oxygen comes into contact with steel at high temperatures an oxide scale forms on the steel. This scale can be difficult and time-consuming to remove. The foil envelope helps minimize the amount oxygen that is able to come into contact with the knife during the hardening process. Thanks for watching and commenting. 😉
@terrytytula
7 жыл бұрын
Thanks!
@fundamentalcleaning
6 жыл бұрын
Beautiful Knife. Good job
@FlatRiverKnives
6 жыл бұрын
Thanks, Mushegh Tsarukyan.
@daryldixon6480
6 жыл бұрын
Good job.
@FlatRiverKnives
6 жыл бұрын
Thank you. : )
@emilyscandycakes4530
7 жыл бұрын
Beautiful...have a vid on sharpening it?
@FlatRiverKnives
7 жыл бұрын
Emilys candycakes check out "Making a Hunting Knife - Part Two" at my channel. I sharpen that knife near the end of the video. Thanks for watching. : )
@QuantumPyrite_88.9
7 жыл бұрын
I only got a glimpse of the vice , but the vice from hell and wondering who makes it . I'll trade you my ex wife for that vice . The blade has a perfect geometry ... complete with the choil . Great job Bro & Congrats .
@FlatRiverKnives
7 жыл бұрын
Thank you Master Tracker. I forget what brand the vice is. I bought it from Amazon. You should be able to find it there. Thanks, but I'll pass on that trade. One wife is enough work for me. 😜
@benfelland
7 жыл бұрын
Very nice piece. What's stopping you from doing the blowing before attaching the handles? The media blasting? Or did you want the handles to take on some of the color too? Did you treat the handles with any finish??
@FlatRiverKnives
7 жыл бұрын
benjamin felland I do blast the handle scales before I attach them, but I blast them again after I glue them on and shape them. I do this to clean up any glue leftover, to give the entire knife a more homogenous finish; and because a blasted finish on the handle tends to have a little more grip than a hand-sanded finish. Plus, I just like the look of a blasted finish. : ) I did not treat the handle with any type of finish. G10 is fine all by itself. Thanks for watching and commenting. : )
@benfelland
7 жыл бұрын
Flat River Knives your right it does look more homogenous, subscribed.
@FlatRiverKnives
7 жыл бұрын
benjamin felland thank you. : )
@paulirons2340
7 жыл бұрын
Beautiful knife. Do you sell any of creation's ?
@FlatRiverKnives
7 жыл бұрын
Paul Irons not currently. I'll have a web store in the near future though. Thanks for your interest though. 😉
@francusa2
7 жыл бұрын
is so beautiful and strong. wow.. :X
@FlatRiverKnives
7 жыл бұрын
Thanks for watching. : )
@szymonjastrzebski2909
7 жыл бұрын
What is the destination of this huge notch? You can also use a welding grip to hold blade when you are moving on sandpaper. ( Translate google style :P )
@FlatRiverKnives
7 жыл бұрын
Hmm Nope!, the notch is a finger choil. It allows the user to safely 'choke up' on the knife if finer control of it is needed. It gives the user the ability to make more precise cuts with a larger blade. Some people love finger choils, some hate them, and some don't care either way. It just depends on the person. I do actually use magnets for that task sometimes, the knife only needed to be lightly touched up that time, so I just used my hand. Thanks for watching and commenting. I appreciate it. : )
@szymonjastrzebski2909
7 жыл бұрын
+Flat River Knives Thanks for reply
@forecaststatistics8496
4 жыл бұрын
Very good job! It's possible to order it?
@spencerdunn866
7 жыл бұрын
How does letting it slowly cool down in air harden it wouldn't that just anneal it
@FlatRiverKnives
7 жыл бұрын
Canadian Cookie A2 tool steel is an air hardening steel. Still air cools it quickly enough to allow the steel to harden. Steel has to cool very slowly to fully anneal. Letting steel furnace cool partially anneals it, but not fully. Thanks for commenting and watching. 😉
@aliemredogramac7915
5 жыл бұрын
Hello thanks for the video, couple of questions about sand blasting. Is this method prevents rusting in carbon blades (O1,O2 etc.) and does it damage the handle if I use natural wood? Any kind of info about the size of the grits will be great too (do you always blast 80? for example) Best, Ali.
@dakotaleeanderson
7 жыл бұрын
And nice work bro . You should talk during your videos though . Let me know when your selling.
@ifell3
5 жыл бұрын
FFS everyone's idea of a survival knife is perspective to where they live. Why so many haters, there's a fine line between knives of a certain type looking like other knives too. Good work, it shows what can be done, you didn't need to explain any of that and that that needed it, Google is your friend. Everyone wants everything made stupidly simple, and these idiots are going to be using power tools hahahaha
@FlatRiverKnives
5 жыл бұрын
ifell3 Thank you for the kind words. Appreciate it.
@theurbanyankee
6 жыл бұрын
I love the design excellent.
@FlatRiverKnives
6 жыл бұрын
Thanks, theurbanyankee. Appreciate it.
@patricknovakdepaula889
7 жыл бұрын
Lindo trabalho parabéns.
@FlatRiverKnives
7 жыл бұрын
Patrick Novak de Paula Obrigado meu amigo.
@yavuzcayc6710
4 жыл бұрын
Güzel olmuş eline sağlık , takımların profesyonel ...
@Youtubetravelcj7
4 жыл бұрын
I want a knife in this clip. How much do you sell? I live in Thailand. Want to buy your knife, this model, can you send to me?
@Youtubetravelcj7
4 жыл бұрын
cjseven2009@mail.com
@internaut4257
4 жыл бұрын
not smart to give your adress on public comment sections
@Youtubetravelcj7
4 жыл бұрын
cjseven2009@gmail.com
@1972verrinche
7 жыл бұрын
Interesante vídeo.alguien sabe para que envuelven el cuchillo en ese sobre al momento de meterlo al horno, que efecto tiene y parece que acá no an templado el cuchillo
@wastelandrebel762
7 жыл бұрын
Para que el metal no se oxide al contacto con el aire
@johanesgo8096
5 жыл бұрын
A beautiful knife, did you design it or did you get a pattern somewhere
Пікірлер: 464