I made 2 lamps using the same bottle. You can make a cleaner install by placing a rubber grommet in the hole you drilled where the wire will pass. For a firmer hold of the head unit, we used the bottle’s own cork. Drilled a hole to pass the hardware and dremell the top portion of the cork to a snug fit to not crack the lid.
@marianacosii5467
Жыл бұрын
Do you know where I can get the lamp holders?
@marivalenti6354
2 жыл бұрын
I did 2 lamps using your instructions. Thank you
@Jakieboysmom
2 жыл бұрын
The knot in the wire before hooking the wire ends to the screws is for safety. If someone trips on the cord the wires won't pull out from the screws and possibly cause a fire. It's called an underwriter's knot.
@mihaicaliman9601
2 жыл бұрын
Nice job! How is the kit callet on Amazon, if I may ask?
@SPHINX144
3 жыл бұрын
Haha finishes a couple of bottles this weekend and didn't want to throw away the hand painted bottle. So naturally I came here lol
@nunetadevosyan4904
3 жыл бұрын
Well done 👏. I just got 2 bottles and going to make 2 lamps. Your way to make it was perfect. Thanks 😊
@vincestracener5326
Жыл бұрын
Made mine! Worked great! I actually glued the silver cork onto the top of the lampshade! I'd add a pic if I could!🤪
@tz444
9 ай бұрын
nice video. It would help if you linked to a parts list
Cool cool . I seen this lamp at Fridas restaurant and bar area. Do you have a video where it doesn’t involve drilling and it comes out through side ?
@lavatoire7879
2 жыл бұрын
Thanks for the awesome video buddy!!
@gregoryprice3463
2 жыл бұрын
This is so cool! I have a quick question regarding the lamp. How big is the bottle? Is it a regular 750 ml bottle of tequila to 1.75 L. It seems so big. However, because you had to drill for a while, the ceramic might be thick and it would be a regular amount of tequilla.
@thebuckaroos6135
2 жыл бұрын
Bottle shows 750 ml but I agree it is larger then normal, it has a tall neck and the ceramic is about 1/4 thick if I had to guess or alittle less
@gregoryprice3463
2 жыл бұрын
@@thebuckaroos6135 LOL! I love tequila, but I think I love this bottle made lamp more! I definitely need help doing this. I don't own any of the tools and am not handy. Thank you so much for replying quickly!
@grasshawk3416
3 жыл бұрын
Do you have a link to the wiring kit?
@thebuckaroos6135
3 жыл бұрын
I hope this helps!! Creative Hobbies Lamp Kit for Liquor Bottles, Wine Bottles - Includes All Adapters and Parts - Silver Finish www.amazon.com/dp/B084T4Z71L/ref=cm_sw_r_cp_api_glt_fabc_P6A94F3RXXYV2A2EJZBK
@mindyj182
8 ай бұрын
Can u use a circular drill bit if it says for glass
@JJW77
2 жыл бұрын
Thank you, I can wait to try it...I need to buy a drill 1st...
@marianacosii5467
Жыл бұрын
Do you know where I can get the lamp holders?
@chrisanderson2252
Жыл бұрын
Can anyone recommend the best kit to use for this? Most of the ones I'm seeing don't have that "cork" part to put in the opening of the bottle, and I'm worried mine will be loose. Appreciate it & hope everyone has a great Christmas!
@jaiocchialini1420
3 жыл бұрын
This seems so complicated lol I hope I can do it. Thank you!!
@XVANGELICAXV
Жыл бұрын
How would you go about doing this without the drilling if it’s even possible I got the bottle from my in laws and would love to gift it back to them as a lamp but I’m so afraid I might break it when I drill it and I can’t even afford buying another bottle or even fathom asking them for a second
@thebuckaroos6135
Жыл бұрын
Yes, the light bulb socket has the option to have the cord come out of the side instead of the bottom, the cord will just be seen from the side
@krlossandoval3920
2 жыл бұрын
how to find accessories on amazon or what is the name
@Jon16pounds
2 жыл бұрын
Where do u buy the lamp kit maker?
@thebuckaroos6135
2 жыл бұрын
Amazon Creative Hobbies Lamp Kit for Liquor Bottles, Wine Bottles - Includes All Adapters and Parts - Silver Finish www.amazon.com/dp/B084T4Z71L/ref=cm_sw_r_cp_api_glt_fabc_THSZR0S65V46JKFK48G8?_encoding=UTF8&psc=1
@mialove781
5 ай бұрын
Why was this not drilled with a diamond drill bit with water? Thats not just ceramic dust - that is smoke. You’re lucky you didn’t crack the bottle.
@thebuckaroos6135
5 ай бұрын
My bad, I guess after the 34 bottles I have done and only crack one by pushing to hard, I don’t know what I’m doing, also definitely not smoke but then again I’m probably wrong about that as well! Thanks for the input! Let me know when you make a video so I can see how it’s done!
@mialove781
5 ай бұрын
@@thebuckaroos6135 I asked a question, as well as speaking the truth about what I was watching on your video. Why are you being snarky with me? You’re triggered because I said that? An amateur watching your video may not know to use a diamond drill bit with water and could end up cracking their bottle. Thats the only reason I asked. I never insulted you or said you didn’t know what you were doing. Forgive me for asking a question and wording it incorrectly. By the way; being snarky is not how to get more followers. It is smoke. Ceramic dust doesn’t float up into the air the way it was here in your video. But you obviously know everything there is to know which is why you can be snarky to strangers asking questions. Forgive me for not seeing that you are THE ABSOLUTE PERFECT HUMAN here on earth. Your rude! I’m a stranger to you and you’re perfectly triggered by my asking a question and making reference to what I see happening on the video. Beautiful lamp. Great job. I’m glad it didn’t crack when you were drilling a hole into it. Thank you for your kind response.
@f1ow3rp0w3r5
3 ай бұрын
@@mialove781 you’re drama. lol. i’d say you’re being the snarky one with the “you’re lucky” comment. i’m also looking forward to seeing your diy video since you can clearly do it better haha.
@f1ow3rp0w3r5
3 ай бұрын
@@thebuckaroos6135 great job with this diy and thank you! i’m really looking forward to making this for my bar!
Пікірлер: 34