I don't have access to an imperial reamer where I live so insteag I chuck the screw and the nut in a drill and ream the hole with the nut by friction. Please don't lose patience with the channel. It will grow. We, plane nuts, need conrent like this :D
@07roadking43
2 ай бұрын
Do you sell plans for that jig you made id love to get them ?
@jeffbourne6015
6 ай бұрын
Superb video demonstrating how to make a tote for a (Stanley) hand plane. Clear concise explanations throughout accompanied by great close up shots of all the processes involved especially the profiling stages. Will definitely watch all your other posts - hopefully you will continue to provide such great content. Many thanks for sharing!!!
@DaveCorinth
6 ай бұрын
Thank you very much!
@ronaldpayne93
6 ай бұрын
Thoroughly enjoying watching your how-to videos. Please keep them coming!
@DaveCorinth
6 ай бұрын
Thank you! Will do!
@alexisperdrix4171
6 ай бұрын
A very big thank’s frome France for all your knwoledge !!!
@spaltedwoodsman4368
6 ай бұрын
I appreciate the use of wood with a personal connection. I recently carved an apple wood spoon from a piece of a tree that I played on as a child fifty odd years ago. Excellent work!
@vincentcoppola9832
6 ай бұрын
Great video. Best home made totes I've seen.
@DaveCorinth
6 ай бұрын
Thank you! 😊
@perrymurphy4100
6 ай бұрын
That's the best instructional video I've ever seen on making a replacement tote. Great bloody job lad. I haven't looked yet but I hope you have plans available. Thanks.
@DaveCorinth
6 ай бұрын
I will, once can open a KZitem store.
@perrymurphy4100
6 ай бұрын
@@DaveCorinthI Iook forward to that
@jimnewman5230
Ай бұрын
Great work and amazing teacher, thanks Dave, you're 'da man!
@DaveCorinth
Ай бұрын
I appreciate that!
@alessandrosuppini943
6 ай бұрын
Thank you for showing your process of tote making, it really looks stunning! 👌
@DaveCorinth
5 ай бұрын
I enjoy showing the process and hope others can make totes for their planes as well.
@michaelmitchell1496
6 ай бұрын
Thanks for the excellent tutorial, Dave. The finished tote sure looks good.
@Cmxx1v
3 ай бұрын
Beautiful! I’ve been a finish carpenter for over 50 years, just retired. I’ve used planes all my life but just recently started an interest in them. Weird, I guess they were a tool to make a living. Love your videos, I’ve been binge watching them. Lots of insight. Subbed.
@timhoover1416
2 ай бұрын
I like watching you videos as a woodworker, even though right now I'm not making a tote. At some point in the future I might need to. Thanks for sharing.
@rjg6139
5 ай бұрын
Thanks for sharing your process. Very insightful!
@davidgriffith6627
5 ай бұрын
Clever process. 👏
@4Truth4All
6 ай бұрын
Nice job Dave! The walnut is a great choice for the tote.
@samparis5096
Ай бұрын
Fantastic video! I've been looking for something like this for ages. Love your drilling jig!
@DaveCorinth
Ай бұрын
Glad it was helpful!
@tobiasfrancisco5879
3 ай бұрын
I love this channel! I've got a bunch of old planes ive picked up for $1-15 dollars that need some love. Im trying to find a sand blaster to get all the japaning off if them. Cheers my friend, can't wait to see what you show us next. 👍🏼
@DaveCorinth
3 ай бұрын
A small bench top blaster will work, for the larger planes like a 6, 7 or 8 a larger stand alone cabinet is needed. Make sure you get a compressor that can keep up!
@tobiasfrancisco5879
3 ай бұрын
@@DaveCorinth awesome thanks Dave!
@jameslovering9158
Ай бұрын
@@DaveCorinth Wish I understood the duty cycle and way these compressors work, I bought an underpowered unit that just about can work for a DIY shed but had I known I would have bought the model up with a belt drive and higher CFM and bigger tank.
@MrShanestain
6 ай бұрын
This is great, I would love to see more! If you ever do a dovetail style saw handle video that would be really helpful. Really liked the router bit, I didn't know that there was one available. Great tips, love how you refined this build. Thanks for you time from Vancouver Island!
@DaveCorinth
6 ай бұрын
I’ve made a few saw handles with this bit, so I’ll make a video of that soon.
@stevem268
6 ай бұрын
i always wanted to try one of these, even have all the stuff you used including that routerbit from lee valley! very nice work. as a woodturner, the knobs are easy
@KomodoWoodworking
6 ай бұрын
Incredible work. Thank you for your time and for the video.
@DaveCorinth
6 ай бұрын
Glad you enjoyed it!
@mikecohoe137
6 ай бұрын
I really enjoyed your video thank you for sharing your knowledge and processes.
@roybailey1134
6 ай бұрын
A great video, David, many thanks. 👏 👏👏👍👍
@rogerhodges7656
6 ай бұрын
I have enjoyed this series. Good luck with your channel.
@bluecollaruniversity
5 ай бұрын
So very helpful! Thank you!
@DaveCorinth
5 ай бұрын
Thank you for watching and glad it was helpful!!!
@terrypickford627
3 күн бұрын
Like your style.
@DaveCorinth
3 күн бұрын
Thank you very much!
@dannyhale7645
6 ай бұрын
Beautiful tote. That video was really helpful. I have a couple of planes that I need to make totes and knobs for.
@DaveCorinth
6 ай бұрын
Glad it was helpful!
@user-wy5ik6zq4r
6 ай бұрын
Great video. I do plane restorations and built a jig similar to yours. Yours beats mine. I’ve never seen the Lee Valley router bit, what a beast.
@pointerish
6 ай бұрын
This was an outstanding video. I once made one of these by hand using files and a lot of elbow grease and it was a lot of work and it didn’t turn out so great. The machines surely do help a lot and of course your experience and knowledge.
@DaveCorinth
6 ай бұрын
The first one I made years ago didn’t look so good either. But as many hand planes as I find without the furniture I set my mind to figure a way out to make these.
@PaoYong
3 ай бұрын
That is so beautfiul great work and love your explanations
@DaveCorinth
3 ай бұрын
Thank you for watching!
@vaughn_Bandit.51
5 ай бұрын
Thanks for the tip on the router bit ... I've been trying to find one for a long time. Any chance you could share or explain how you made these templates. I happen to agree with you 100% on the Lee Valley template ... grain orientation not is correct. I love your solution. Great work.
@DaveCorinth
5 ай бұрын
Video on making templates in the works…..
@DavidH-y4k
2 ай бұрын
Excellent work. Beautifully paced and demonstrated. Have you ever thought about using Tung oil? Lovely warm finish. Best wishes from Australia 🇦🇺
@DaveCorinth
2 ай бұрын
I have and have used it on occasion, and love tung oil on mahogany and walnut. With totes and knobs I try to use what was originally used.
@alexanderweltz1700
6 ай бұрын
Great job! 👍 Thanks for sharing!
@swbslove
6 ай бұрын
Fantastic work
@MASI_forging
6 ай бұрын
Incredible work. 👍👍
@snellscroft
6 ай бұрын
Great video, very helpful
@liquidrockaquatics3900
2 ай бұрын
I’m going to watch this later when I’m not on the road. Paul Sellers has an excellent video as well. He doesn’t use a jig to get the hole. He starts with the hole and then aligns the bottom of the tote with the hole. I’ve been practicing making them for the last month or so, and have managed to make two serviceable ones so far. I like hard maple best so far. The only issue I have is smoothing the inside corners as I don’t have many rasps or files.
@DaveCorinth
2 ай бұрын
You could wrap a piece of sand paper around a wooden dowel.
@myhandlehasbeenmishandled
6 ай бұрын
Did you just recently started posting videos? I just subbed. I hope you continue. Great work. I don't do woodwork because i have no money but I love watching and learning.
@DaveCorinth
6 ай бұрын
It’s only my second month making videos, and I am enjoying the process and the interactions with you all.
@northernhumidor5615
6 ай бұрын
Awesome video.
@janetcoursey6756
6 ай бұрын
Wonderful video! How did you make the pattern? Are there different size totes for different plane sizes? A video explaining this would be very helpful. Or you could sell the patterns!
@DaveCorinth
6 ай бұрын
Video has been made will post soon.
@FearsomeWarrior
5 ай бұрын
Well, I added the variable round-over bit to my ample Lee Valley wishlist. Kind of hoping you do a knob video. Even if it is just a template and simple enough to you. The order of operations seems more accessible when I watch you doing. Maybe some nuances to learn from you.
@randygust3423
2 ай бұрын
I’m curious if I have this right - there seems to be 2 different tote handle shapes that Stanley made. The main difference is one is thicker at the end of the horn and I see this thicker shaped tote on type 19s but it’s also the shape that Lee valley uses on their layouts. You are using the other shape which in my opinion is significantly more comfortable. I’d be interested to know if i understand this correctly?
@scottbennington2936
5 ай бұрын
Great tutorial. The final product turned out nice. Question - can you tell me about the flat head screw driver at the end of your video? I cleaned some of my grandfather's old hand tools up and that same screw driver was part of his tool kit. I haven't found any maker mark or info on the manufacturer. Thanks again for your time.
@DaveCorinth
5 ай бұрын
It’s called a “perfect handle” screw driver. I don’t know who made the one I use, it was my grandfathers as well.
@Fusion_Woodworking
6 ай бұрын
Great result.
@edm.6657
4 ай бұрын
Thank you!!!
@peterbaum1823
4 ай бұрын
Awesome video. I have a flock of Stanley planes that need new totes. The old ones were either busted or missing entirely. Have a few with the Stanley decal still on it, or, most of the decal, and I'd rather not have that on a user. How do you drill the little recess for a Stanley 3 or four tote?
@DaveCorinth
4 ай бұрын
For the No 3/4 that have a raised boss that requires a recess on the bottom of the tote, I drill that before I drill from the underside. On Stanley’s it’s usually at a right angle to the bottom of the tote, but on some others it’s at the same angle as the rod. I use a forstner bit to do this. I’m going to make a video soon on making a 3/4 tote and knob set. So keep an eye out.
@American_Woodworker
5 ай бұрын
Awesome information. You have the process nailed down, making it look way too easy. But anyone who's attempted reproducing a tote knows, it's tedious...and anything but easy. Great job! Next video...the knobknows, or a dovetail saw handle with lambs tongue detail.
@vaughn_Bandit.51
4 ай бұрын
Great work.. Any chance you could share or explain how you made these templates...or post a link if you have already done so. I love your template idea.. much safer ... Great job.👍
@DaveCorinth
4 ай бұрын
Making a video as we speak….
@jimpeterson5565
11 күн бұрын
Art!
@DaveCorinth
11 күн бұрын
Thank you!!!!!!
@JohnQuinn-t6i
6 ай бұрын
Great video; appreciate your work. Just wondering what you use to fill your screw holes? Have you tried hot glue or double sided tape? Or do those form too weak a bond? I imagine that bit creates a lot of stress. Thanks.
@robinvilla8920
6 ай бұрын
Can you tell me what the Lee Valley round over router part number is and what size bearing used for for the proper round over. That is a fantastic video showing your methods for making the tote.
@DaveCorinth
6 ай бұрын
Lee Valley part number is “16J4010” is called a variable round over bit. They have all the specs including the bearing diameter on their website. Looks like the price is around $86.00 now.
@staceylewisdesigns
6 ай бұрын
Very nice video.
@estetubo
9 күн бұрын
Excellent technique! Can you please share the thickness of the wood you used for this? Thank you
@DaveCorinth
9 күн бұрын
I buy 1” thick stock for totes, and 2 1/2” thick stock for knobs. Stanley totes are typically .95” or around 15/16” thick. The knob vary depending on the age and the type.
@estetubo
9 күн бұрын
@DaveCorinth thank you much
@devinteske
6 ай бұрын
You beautiful human being! 15/16” is the secret measurement. The two totes I have made so far were 3/4 starting out before shaping (by hand), and I was thinking they felt a little on the thin side. I just did not know where to start. I made a CNC profile for my Shaper Origin, but after seeing how fast you made that, now I wish I had a 1/2” collet router (is that bit 1/2” shank? What HP you running?), a drill press, and your jig. Thank you so much for showing your process.
@DaveCorinth
6 ай бұрын
First, thank you for the compliment, and second, I use a Bosch 1617 2.25hp router with a 1/2” collet. Hope this was helpful and thank you for watching.
@stevebeck2734
6 ай бұрын
Great video, what is the number of the Lee Valley adjustable bit? The only one I see on their website is 16J9403. They say it is for 3/4" plywood. Please advise the number on your bit.
@DaveCorinth
6 ай бұрын
The part number is 16j4010. It allows for thickness from .79”-1.00”
@dnewendorp
6 ай бұрын
That router bit looks terrifying...
@DaveCorinth
6 ай бұрын
That’s why I put those handles on the templates. It would mangle some fingers!!!
@liquidrockaquatics3900
2 ай бұрын
By chance, do you happen to know the threading of the rod on that Stanley rod? I have wanted to make taller handles without sinking the barrel nut an inch down inside; I would rather make new rods and thread both ends
@DaveCorinth
2 ай бұрын
Stanley threaded rods are 12-20. There’s a couple of folks that offer the tap and die on eBay.
@busterdavy9769
6 ай бұрын
Do you know the thread pitch on the tote bolts ,are they metric or standard USA? Thanks
@DaveCorinth
6 ай бұрын
Standard, on Stanley they are 12-20
@B.A.Bassangler
6 ай бұрын
Oh NO! I was hoping for a link to buy one. I had removed the plastic tote on my new #5 and mill filed the mating surface flat...should have done the same to the plastic handle also, oops.
@DaveCorinth
6 ай бұрын
Coming soon…..
@Michael-Nic-l1d
2 ай бұрын
Making a tote is normally for yourself. If you're a master joiner . Wring wood to begin with. Stanley normally use Brazilian rosewood. I use English yew can be used for archery bows, veneers, cabinetry ,handles , furniture, carvings, musical instruments (lutes), and turned objects. Availability: English Yew is relatively uncommon. The larger size tree trunks are usually hollow.
@DaveCorinth
2 ай бұрын
In the early years Stanley used Brazilian, starting around the end of the SW era you start to see Cocobolo Rosewood. The type 19’s are Cocobolo Rosewood, which has a more red color. I’ve never tried Yew, but it’s on my list. I’ve used Black Walnut a lot, it’s readily available where I live.
@yahdude9050
6 ай бұрын
Silly question, but are the different angles of totes just a personal preference for comfort while using the plane. or is the a functional use that I'm missing??? Thanks
@DaveCorinth
6 ай бұрын
I should have explained that better in the video. A type 9 and later Stanley No 5 has a 27 degree rod angle, while an early no Stanley No 5 earlier has a 29/30 degree angle. The No 3/4 totes have a 26 degree angle while Sargents have a 25 degree rod angle. So each block is basically for a different tote style. I make totes for Stanley’s, Millers Falls, Unions, and Sargents. I’ve even made a few Lie-Nielsens and Veritas totes, although those are much lower around 14-16 degrees. Hope this answers your question.
@yahdude9050
6 ай бұрын
@DaveCorinth thanks for the wooly very interesting, love the videos. Thanks
@mr.sandman770
6 ай бұрын
Mr. Corinth, do you sell your totes? If you do, is it on a website, or facebook? Thanks.
@DaveCorinth
6 ай бұрын
I sell them on eBay, or you can find me on Facebook under the same name and contact me directly.
@eugeneleith1927
3 ай бұрын
Good day can tell me what is the angle of the hole on the tote of your of hand plane
@DaveCorinth
3 ай бұрын
@@eugeneleith1927 they vary. Stanley No 5’s generally have a 27 degree angle, no 3’ & 4’s have a 26 degree. Some of the early Stanley’s have a 29-30 degree rod angle. Its best if you have an tote or the plane on hand that you are going to make a new tote for to check the rod angle for that specific plane.
@mitchellkirk1238
6 ай бұрын
Do you sell the template for your totes & tote jig?
@DaveCorinth
6 ай бұрын
I do not at the moment, but several people have expressed interest so I’m am working on it.
@mitchellkirk1238
6 ай бұрын
@@DaveCorinthI already bought the router bit and metal hardware for the jig
@DaveCorinth
6 ай бұрын
@@mitchellkirk1238 contact me through Facebook. I have the same name Dave Corinth. We’ll chat.
@robertsevera137
6 ай бұрын
have a good day😄
@davidpeters8813
6 ай бұрын
but is it tote or toat? 😋
@DaveCorinth
6 ай бұрын
Hmmmmm, I had to look that one up. Apparently two ways of spelling, and in the dictionary it’s “the handle of a joiners plane”. Good one…..
@davidpeters8813
6 ай бұрын
@@DaveCorinth we should start the toat revolution so we can all get back to proper English! 😁
@mrfirestop415
6 ай бұрын
@@davidpeters8813Yeah, uh, the spelling "toat" came from African languages that use "tuta" for the word carry. Tote had been used by the English since the 1600's, so....
@davidpeters8813
6 ай бұрын
@@mrfirestop415 but a "tote" is a ladies handbag 🙂
@mrfirestop415
6 ай бұрын
@@davidpeters8813 In the 1600's it wasn't. I don't use either of these stupid "historical" words for a handle. In my peer community I'm the only handtool woodworker, calling a part of a tool a "ladies handbag" takes far too much energy to explain to a layperson. Handle is universal even to my English Second Language peeps.
Пікірлер: 116