Again, thank you ALL so much for the support, kind words, and just generally following along with the builds and the channel. This community has been not only welcoming and encouraging, but also extremely knowledgeable. I've learned so much already and it's honestly a pleasure to be here! Tune in again on December 23rd for an extra special build. This one is a throwback to a past life, and has been in the works for months. So I can't wait to dive in... AGAIN! ;) See you then!
@Andreg13
Жыл бұрын
I will watch and REwatch these videos over and over. Super high quality. Love the journey
@TalRohan
Жыл бұрын
i enjoy your video's very much...(enough that I even watch the adverts to make sure you get paid)
@rainbow3d
Жыл бұрын
Thanks for always making my day with relaxing videos and interesting techniques!
@aserta
Жыл бұрын
It's a pleasure to have your videos to watch, you've great style. Plus, this is the community that keeps on giving. And you already are giving. Someone's for sure already following your journey, thinking: "one day, when i'm old enough...". ;)
@i.bcraftsman5977
Жыл бұрын
No sir Thank to you ❤️
@Jons.Design
Жыл бұрын
As a mechanical engineer that uses inventor every day, I find your hand drafting very therapeutic to watch.
@MONKEYBIFFSNIFF
Жыл бұрын
Agreed, makes me feel so inferior using CAD 😂
@timderks5960
Жыл бұрын
Same, I had to watch it again to even hear what he said, I was so focused on the drawing.
@Inkreptile
Жыл бұрын
Same
@ajosepi1976
Жыл бұрын
I spend all day every day on CAD. I also spent 30 years drawing artwork. I don't miss it, but it is nice to watch.
@Argosh
Жыл бұрын
@@ajosepi1976 it's ultra therapeutic to watch someone else do the work XD
@John-yg1cq
Жыл бұрын
That adding of a slight chamfer to the play button is just 👌
@colinfurze
Жыл бұрын
Well done, its been amazing watch this channel grow. On to a Million i say
@InheritanceMachining
Жыл бұрын
That truly means a lot, Colin! Thank you. I'm here for the ride!
@SubramaniamLakshminarayanan
Жыл бұрын
I just added mine to help reach a million!
@atomictesting6412
7 ай бұрын
I think I’m starting to get an idea of what Colin watches in his free time
@williammeadors3451
Жыл бұрын
Just a tip from a fellow machinist, those Kurt vises usually have the ability to mount the movable jaw to the rear of the slide, giving you 5-ish more inches of travel.
@mooreevair
Жыл бұрын
I would be concerned that it wouldn't give a true flatness
@InheritanceMachining
Жыл бұрын
Thanks! I didn't even think of that... I'd imagine jaw lift is more of an issue though?
@aethertech
Жыл бұрын
@@InheritanceMachining Maybe its just time to make a new vise?
@qwerty3663
Жыл бұрын
Depending on which vice you have, you can also move the fixed jaw to the outside and thus have a range up to the lenth of the vice.
@Nathan511
Жыл бұрын
I was thinking the same thing. Both jaws (movable and fixed) can be mounted on the back side if needed. In regards to jaw lift, I’ve never had an issue there, but I wasn’t doing super precision work either. Kurt vises (and the good clones) are designed to pull the moveable jaw down with tightening and don’t have as much issue there as the previous generations of machinist’s vises.
@phillipnichols4125
Жыл бұрын
9:05 there is nothing frivolous about perfectly matched chamfers. They are always so satisfying to see.
@randyshoquist7726
Жыл бұрын
It's what separates us from the animals. (Or so I've heard elsewhere on YT. )
@DavidLindes
Жыл бұрын
@@randyshoquist7726 hello, fellow Quinn fan. ;) (And InheritanceMachining fan too, obviously! Because indeed, great stuff here.)
@rafezetter8003
Жыл бұрын
I'm a woodworker and I feel the same about mitres - the difference between a good set and a bad set shows the mettle of the person that did them and the care they have in thier work.
@phillipnichols4125
Жыл бұрын
@@rafezetter8003 absolutely!
@BruceBoschek
Жыл бұрын
Congratulations to a well deserved wall plaque. There are many wonderful metalworking, machine tool, mechanic sites on KZitem. Yours is truly unique because you share with us your learning process at a very high level. Your voice-over discussions are of very great value to many people. You are humble without being self-deprecating, you have a delightful sense of humour and you are an uncompromising artisan craftsman. Thanks for all of your efforts. We appreciate them.
@HannyDart
Жыл бұрын
what other channels can you recommend?
@InheritanceMachining
Жыл бұрын
Bruce, you have a way with words. Thank you so much for the support as always. The pleasure is mine!
@sudarshanchetty3757
Жыл бұрын
Nicely said and well received. I have to say I look forward to these videos every week, just wish it was in metric !
@BruceBoschek
Жыл бұрын
@@HannyDart Here are some of my favourites: Abom79 Basementshopguy Blondihacks Bruce Whitham Chris Maj Cutting Edge Engineering Australia Dragonfly Engineering Dudley Toolwright Edge Precision esd373ify Fireball Tool James T. Killroy Jr. JamesPark_85 Machining TV Keith Fenner Matty's Workshop Max Grant MrCrispin my mechanics Nik Colyer Machine Works Old Iron Machine Works oxtoolco Randy Richard in the Shop ROBRENZ shop and math Steve Summers This Old Tony Topper Machine LLC Winky's Workshop
@HannyDart
Жыл бұрын
@@BruceBoschek wow! thats a big list, ill be sure to check them out (some i know already) Thanks a lot for the effort!
@CurtisGurley
Жыл бұрын
Each video I watch leaves me with " I know your Grandfather would be so proud " He would be proud of the care you have taken to get and keep these machines in proper working order. He would be proud of the saved materials being used to make tooling. Most of all I think he is proud of you sharing your knowledge with the next generation. I am a machinist by hobby and do job shop stuff as a side gig. You have found the correct balance in content, you neither over or under describe. Meaning you don't bore the ones who have the know how but don't lose the ones who are learning. I look forward to the content of this channel more than any other.
@InheritanceMachining
Жыл бұрын
That is very kind of you to say. Thank you so much, Curtis!
@ErikS-
Жыл бұрын
As a mechanical engineer educated at a technical university, I wish I had more of this hands-on experience...
@renatomsgomes
Жыл бұрын
Me too totally agree
@LordOfTamarac
Жыл бұрын
You definitely deserve all the subs, the production value is off the charts, whenever a new inheritance machine a video drops it’s a good day.
@InheritanceMachining
Жыл бұрын
I really appreciate that. Thanks, Mike!
@coreycreehan8197
Жыл бұрын
You deserve the gold button. You came out of the gate swinging for the fences and you smashed a walk of grand slam in game 7. Here's to many more years of sharing your Inheritance
@frankhenigman5117
Жыл бұрын
I smile every time you say "that could be better" .... and then you do better.
@Khitiara_
Жыл бұрын
for the slotted fixturing options, i'd recommend looking into how fireball tool dealt with possible slippage of that (downward clamp vs sideways force isnt perfect) using a second non-slotted serrated piece to engage with serrations under the slotted part. great work on the project, always excited to see one of your vids in the sub box! EDIT: also, the clickspring video has been a patron exclusive for years, hes just generous enough to give it to us mortals now
@InheritanceMachining
Жыл бұрын
Thanks! I think I remember seeing that feature of Fireball's at some point. Good idea!
@aethertech
Жыл бұрын
Will second this, Fireball has some great ideas for fixturing.
@jasonhull5712
4 ай бұрын
I wish I had half the skills and talents you have. I went to college for machine tool and die back in the day, however they didn’t teach very much, mostly how to read instruments, metallurgical characters, READING prints, and just overall basics. I went for two years, afterwords landed a job in a tool room with some of the most advanced shockingly talented, no more like gifted individuals who quickly reminded me that I knew absolutely nothing. I got so discouraged I took another position out on the production floor. That decision still haunts me to this day. I missed such an amazing opportunity if I only could have swallowed my pride and listened to those gifted men. They were willing to educate me, in fact I think they took too much enjoyment from it at times. But my young mind and ego simply couldn’t comprehend or appreciate being the most ignorant person in the room on a daily basis. Now much,much older I can see it so clearly. Those men were at the very top of their game, and they were testing me. And I failed. But watching you and seeing the level of detail, the methodological approach to every step, the skills and tactics applied. Brings me back to that tool room but this time it’s different, now I know exactly what I need to do. And that is shut up and listen,watch, and appreciate the gifts you are bestowing upon us. I’ve worked along side of fellas such as your grandfather, and I can see he has ignited that passion in you and it shows in you content. You guys are amazing. I truly appreciate your content. I hope that it inspires many more younger viewers to embark on a journey into machine manufacturing in some form or another. 😁🍻
@Alexjanchapro1
Жыл бұрын
Congrats on the 100K! I'll be sharing this channel with my machining instructors, I'm certain they'll be impressed with your content as well!
@InheritanceMachining
Жыл бұрын
Thank you so much!
@johncrowley5612
Жыл бұрын
The sub count is now 150k! Phenomenal rate of growth.
@steinmargunnarsson3709
Жыл бұрын
It is always a pleasure to see your paper drawings and the results, great work.
@InheritanceMachining
Жыл бұрын
Thanks!
@Thoron_of_Neto
Жыл бұрын
Some channels on KZitem, have millions of subscribers, and deserve it half as much as yours. Your attention to detail, dry humor, unruffled narration and clear talent, and skill with your craft are what keep me coming back, despite as I've said, not really ever doing metalwork myself. Congratulations on 100k, here's to hoping it just keeps climbing! Also, 2024 aluminum, sure does clean up nicely! Even with the minor issues and variances, those parts look sharp and beautifully done! We usually use alclad when we use 2024, because the cladding corroded quickly, and protects the heat treated aluminum underneath, from corrosion, because it's not open to the environment. It's nice to see the potential for beauty buried under an oxidized surface from time to time 🙂
@InheritanceMachining
Жыл бұрын
I really appreciate that, man! That was my first time working with that grade and I was impressed as well!
@Phiz787
Жыл бұрын
One of my quickly blossoming skills is finding alternative things to do while waiting for ordered parts to arrive... When your capacitor blew and you moved to the Lathe... Yeah I felt that. Such a real DIY shop experience.
@brandonsimpson2872
Жыл бұрын
Congratulations! I stumbled upon your channel a few months ago and I have been mesmerized by it ever since. I can't wait to see all the videos to come! As an engineering student I love watching your videos and learning so much. It has inspired me to get into the machine shop more at school, and even given me some ideas for projects of my own. As a more digital engineer, it intrigues me to watch you do all these things in an analog fashion, from your drafting to your machining.
@InheritanceMachining
Жыл бұрын
Thanks Brandon and thanks for the kind words. Glad to hear you're taking advantage of that shop access while you have it!
@IHWKR
Жыл бұрын
I hope youtube will become a more regular platform for you. I really enjoy these videos and will love to see them more often.
@InheritanceMachining
Жыл бұрын
Thanks. If I could make these more often than every 2 weeks I definitely would. They take a lot!
@HelenaOfDetroit
Жыл бұрын
Thank you for sharing the journey! Your videos act as evidence that hard work and consistent effort are required to make the most of any inheritance. You've done your family proud.
@InheritanceMachining
Жыл бұрын
That comment really means a lot. Thank you so much Helena
@LaneHelms
Ай бұрын
I am a long time retired engineer, it was a real pleasure to see an old drafting machine and circle template instead of CAD (which I can’t do) and no 3D printing (which I cannot do).
@lexugax
Жыл бұрын
Every time I watch one of your videos I am left wondering when the next one will come out. Great work, both the machining and the clean, simple video editing. I have to say this is my #1 favorite channel. Thank you for bringing it to life.
@InheritanceMachining
Жыл бұрын
I really appreciate that! Thank you! And FYI its every other Friday. You can count on it!
@Stephen1455
Жыл бұрын
So happy to have found and joined your site, I started off as a Tool and Die apprentice, then Tool and Diemaker in the UK at British Leyland, then moved to the US and several jobs later my Pinnacle was to become an InstrumentMaker for a scientific institute, through all this I was strictly a manual machinist and it sadly lacking now with CNC everywhere. Your skills, drawing brilliant, machining brilliant!!!!
@ZanderKaneUK
Жыл бұрын
CONGRATS ON 100K. The snowball has began. Only found the channel because of another youtubers recommendation and over the last 2 weeks have binged the lot. I love the technical drawings, was my favourite part of metal work at school in the early 90's before computers where mainstream.
@InheritanceMachining
Жыл бұрын
Thanks! The drafting is a bit time consuming but it's a little less soul sucking than staring at a screen more than I already do. Also, do you remember what channel you heard about mine from? I'd like to thank them
@doobaloo1326
Жыл бұрын
I don't know if anyone said anything yet but having a mirror on a stick is a life saver when sweeping in the head. Much less walking back and fourth. Awesome videos!
@InheritanceMachining
Жыл бұрын
Ironically I have one 😂 Thanks!
@publiusii4246
Жыл бұрын
It really is amazing how fast this channel has blown up. But it's down to how high quality and professional it is at it's relatively young age
@InheritanceMachining
Жыл бұрын
Thank you 🙏
@andrewdolinskiatcarpathian
Жыл бұрын
“ A lathe is a mill that fell over”. What a brilliant description 👏👏👍😀 Oh my, I so want to make a mini version of this pallet. Fantastic build as always. Thank you for sharing. And as for the ending, you so deserve the plaque from KZitem. No need to thank your viewers, we thank you. 👏👏👍😀
@Hubilicious90
Жыл бұрын
Honestly, we have to thank you for the passion you put into those videos, not the other way around. You skyrocketed to my favourite machining channel, even surpassing juggernauts like ToT and Clickspring. Thank you for regularly making my day!
@InheritanceMachining
Жыл бұрын
That's truly and honor as those are 2 of MY favorites. Thank you so much!
@TheRecreationalMachinist
Жыл бұрын
Stunning work! 👍 🇬🇧
@InheritanceMachining
Жыл бұрын
Thanks!
@bantamtools
Жыл бұрын
This is precision at its finest. Congrats on the milestone!
@InheritanceMachining
Жыл бұрын
Thank you! And thanks for the poster!
@bantamtools
Жыл бұрын
@@InheritanceMachining, you're welcome! And oh cool. Glad to hear it got there 👍
@matthewsimmons6831
Жыл бұрын
Congratulations, I'm sure your Grandfather would be proud. That plate looks beautiful. Like ToT says, when it comes to chamfers, it pays not to cut corners.
@InheritanceMachining
Жыл бұрын
😂 Thank you very much!
@charlvanniekerk8009
Жыл бұрын
For only being around for such a short period of time its astounding how many subscribers you already have! I am privilege to have been here since you only had a few thousand and now at 149K!!! I will say it time and time again that you are an inspiration. If anything you give everyone who sees your work an understanding of what it takes to achieve precision, including me. And for that I couldn't be more grateful, so from the bottom of my heart..... Thank you
@InheritanceMachining
Жыл бұрын
It's always a pleasure to see your comment, Charl. Thank you so much for your nice words and for following along all this time. I can't tell you how much that means!
@jorg1357
Жыл бұрын
Just wow. Amazed by your growth. Your drafts.. my god. Therapeutic like someone said before. Greetings from 🇦🇷 Argentina 🇦🇷
@quadrannilator
Жыл бұрын
Been with ya from the 1st video, and really happy with where you are and where you are going to journey forward and the side projects you will meet along the way! Thanks to your wife too for shooting all this footage. Everything that is clear about your channel - mechanical engineering basics, research, narration, your manual drafting, workshop organization, machine setups and cleanliness, openness to take inputs from all the commentators, videography, the way you carry forward your legacy - everything is noticed. While we may not even have seen a proper first commercial product, Im am sure they'll turn out amazing with all the tools you make to make more tools! Keep it up, all the best and we are all joyful for having inherited your machining channel and we also know your grandpa is so proud of his legacy! Congratulations for the Silver. Thanks again! 👍
@InheritanceMachining
Жыл бұрын
Thank you so much! We are doing our best to make something meaningful here and really appreciate you noticing all the effort!
@dkpianist
Жыл бұрын
Any woodworker, no matter how pedantic, can only marvel at the level of precision this craft requires. Fascinating to watch. Great work!
@InheritanceMachining
Жыл бұрын
Thank you 🙏
@REKLESSWOLVES1
Жыл бұрын
Love this channel, been a follower for about a year now, also HI to all the Engineers out there, i`m not an Engineer myself sadly but my Father was so i inherited some of his love for precision and quality, i`m a 53 year old Kitchen Installer from the UK with almost 40 years experience who takes great pride in the quality and accuracy of my jobs, i`m also heavily into ancient engineering techniques, specifically how the so called Dynastic Egyptians cut and polished igneous stone like Granite and Diorite which has a Mohs scale hardness of 6 - 8, there are a good few Engineers out there now who believe, as i do, that these highly accurate monuments and statues were cut on machines similar to lathes and mills, the precision on some of these artefacts is to within 100th of a millimeter yet were are told by the mainstream archaeological community that they were done using copper tools, chisels and dolorite pounders BY HAND, anyone who knows Quartz, as i do as we use it for countertops, knows it can not be cut or shaped using copper or bronze tools to this precision, also under a microscope these objects don`t show impact marks which you would associate with chiselling and hammering, they are perfectly smooth, perfectly square and they even pass the light test with an engineers light test you can`t get that accuracy by hand, many of these artefacts show evidence of tube drills cut at a rate that we can`t replicate even with today`s highly advanced CNC machines, there`s evidence that huge 1200 tonne blocks and single columns were cut using a huge overhead circular saw and Live Centre holes in the bases of 200 - 300 tonne single piece granite pillars, there is an English Aerospace Engineer who moved to the States called Christopher Dunn, his qualifications are second to none in the field of Engineering, he`s travelled to Egypt and other locations around the globe and conducted tests on many of these artefacts and he`s concluded they had to have been cut and created using ancient engineering machines, something we are told never existed in pre history yet the evidence discounts that, there is a channel on KZitem called UnchartedX presented by an aussie guy called Ben, his channel is dedicated to exposing these incredible highly accurate artefacts and calls for academia to acknowledge that there was once a long lost forgotten ancient highly advanced civilisation that existed before 12.500 years ago and was erased from human history by what`s known as The Younger Dryas Impact, a theory that has since been proven correct and it`s been peer reviewed, my big ask in all this to all you Engineers out there is to have a look at Chris Dunns work and Ben`s over at UnchartedX, see the evidence for yourselves when you get time and if at all possible lend your expertise and engineering knowledge to their work, the more skilled engineers who get on board the quicker science and archaeology will take it seriously, the theory is that in pre history there was a highly advanced global civilisation that had the knowledge and technical ability to build these ancient monuments and that the Dynastic Egyptians only uncovered, inherited and repurposed these sites thousands of years later once Earth`s climate settled down and human population and society was rebuilt, a big ask i know but i know these guys would appreciate your time and skilled knowledge to either agree with their hypothesis or point out errors in their theories, thanks for reading all this, i appreciate it cheers. Glen, West Midlands UK.
@clydebalcom3679
Жыл бұрын
This is the type of project that is so interesting to me. But what is more impressive is your ability to work well outside the box.
@InheritanceMachining
Жыл бұрын
I usually try to break out of my comfort zone by a little with each project. Thanks as always, Clyde!
@rbdesignsnh
Жыл бұрын
ever since starting to watch this channel the following phrase runs through my head every time i open Fusion360 "....because chamfers are sexy"
@InheritanceMachining
Жыл бұрын
That's exactly right
@montanan9397
Жыл бұрын
I lost it when you chamfered the plaque! I've loved watching all of your videos and watching the shop grow. Keep up the great work!
@InheritanceMachining
Жыл бұрын
😂 Thank you!
@rockytrh
Жыл бұрын
"A lathe is basically just a mill that tipped over." I don't remember which youtube machinist said something similar (I think it was Quinn from Blondihacks, but not sure), but they said basically the opposite of that. That a mill is just a lathe that tipped over. They said something along the lines of "every operation you can do in a machine shop can be done on a lathe, just not as efficiently. The ability to do operations on a mill is just a refinement of efficiency, sometimes by a little, sometimes a lot."
@gregahitchcock1982
8 ай бұрын
As someone who was trained in hand drafting, and more using CAD everyday, I am impressed with you drawing each and every one of those holes in your plan diagram.
@BCHonea
Жыл бұрын
F man, your drafting is so satisfying. Reminds me of architecture school
@InheritanceMachining
Жыл бұрын
haha Thanks!
@Aeronaughtica
Жыл бұрын
Thank YOU Brandon for all your hard work and craftsmanship!
@InheritanceMachining
Жыл бұрын
Thanks!
@keithviolette5870
Жыл бұрын
Congratulations on reaching 100k! Beautiful design for the fixture plate, I'm definitely going to have to make a vise mount sub-plate for mine, and the large cylinder for angle mounting is very clever. Quicker than swapping to my tilting vise. I did design a wallet that I will get around to machining at some point, but I will probably 3D print a few prototypes first to perfect the design.
@InheritanceMachining
Жыл бұрын
Thanks Keith! I don't know what kind of vise you have but a couple people mentioned the ability to flip the jaws on Kurt vises like mine. Could save you from having to make the sub plate. I'd love to see your wallet when you finish it up!
@caffienatedchaos
Жыл бұрын
Was here when you hit 100, 100, 10k, and 100k. I'll be here when you hit 1m, as will the rest of us, and many, many more new faces. Your grandfather would not only be proud, he'd know that his legacy is in great hands. Thank you for bringing all of us on this journey with you.
@InheritanceMachining
Жыл бұрын
It's honestly been my pleasure. Thank you for the support all along the way!
@mynamisis
Жыл бұрын
A good tip for fitting oversize pieces in your vise is unscrew the jaws from the inside surface and mount them to the outer surface. I think with your particular vise you could have fit the aluminum fixture plate stock, and they are made for this so your workmanship would not have suffered
@tftf60
Жыл бұрын
What you present here is the whole package... I started to rewatch from the begining. Thanks for sharing with us.
@InheritanceMachining
Жыл бұрын
I really appreciate that! Thank you
@Thunder-cj4ck
Жыл бұрын
lets goooo!
@morganwhittle854
Жыл бұрын
CONGRATULATIONS! I work in a precision manufacturing shop, I used to do manual and CNC machining. I found your channel a few weeks ago and subscribed immediately. I love the need for perfection, I'm the same way. I love the content, keep it up. I know you grandfather would be proud.❤️
@InheritanceMachining
Жыл бұрын
Thank you! Welcome
@caleb2335
Жыл бұрын
Oi man are you going to participate in the makers Christmas. I know your fairly new to KZitem but if you don’t know what this is maybe ask This Old Tony, tbh I really don’t know how the makers Christmas thing works but I feel like you would be a good fit. Never hurts to ask, Damm this is long, anyways love the content!!!
@caleb2335
Жыл бұрын
Also congrats on 100k!!!!
@InheritanceMachining
Жыл бұрын
Thanks! Yeah I've seen ToT and others participate in years past but wasn't sure how to get involved. Might be too late this year
@dathaniel9403
Жыл бұрын
I can’t believe how this great channel came out of nowhere. It’s gone from 0 to 155,000 subscribers in just a few months, and deserves every one of them and more.
@InheritanceMachining
Жыл бұрын
Thank you 🙏
@carlosfelix4057
Жыл бұрын
I stumbled on this channel, I think on an KZitem suggestion and I have to say it is fantastic. So far every video I have watched has given me something new learned. Thank you.
@InheritanceMachining
Жыл бұрын
Thank you!
@charlescompton4495
Жыл бұрын
You are very welcome! You have included the very important design step which I enjoy a lot. Thanks, Greg.
@commutinginatlanta9163
Жыл бұрын
Your videos make me miss machine shop classes I took in High School. I was amazed the first time I made a bolt.
@sillyentz
Жыл бұрын
I love your channel. It is simply a joy to watch. Your voice is so calm and listening to your thinking out loud as you problem solve in your pursuiu for incrementally more accurate reference edges.
@InheritanceMachining
Жыл бұрын
Thank you 🙏
@infoSignDynamic
Жыл бұрын
Your attention to detail is infectious. Thank you for explaining things and making it known that everybody makes mistakes. Thanks again for providing us with some outstanding content. Now I gotta get out in my shop and make something.
@aarongouin2128
Жыл бұрын
Some serious old school skill here. I like how you print all your builds. Very professional. It shows in your finished work.
@tmpho-kh9du
Жыл бұрын
Got into this trade for the opportunity and money. But truly fell in love with it. Work like yours and videos like yours helped me fall in love with machining. Years back I would laugh at myself for getting excited about blocks of steel with holes in it! Great work as always.
@InheritanceMachining
Жыл бұрын
Haha glad I'm not the only one 😉 I appreciate it though! Thanks!
@elliotwitkowski6098
Жыл бұрын
I’m not a machinist, nor am I a metal worker. Just a humble telecom technician. Your content is captivating, educating and all around entertaining. Been here since the beginning, my 13yo son and I watch this regularly. It’s a nice way to introduce him to different trades and a realistic expectation of what the field involves (math, calculus, trigonometry…). Thank you for putting this out there for us to find.
@InheritanceMachining
Жыл бұрын
Absolutely my pleasure! Thank you
@stevehood10
Жыл бұрын
Every time I see you on the board it takes me back in time and I remember all the guys I worked with, the long hours on projects and all the fun we had at work. love the machining too, great work. Thoroughly enjoy your channel.
@InheritanceMachining
Жыл бұрын
I wished I had come up in that time. I feel like it would have been a lot more fun 😁 Thanks!
@thegoodlookinorange1986
Жыл бұрын
I worked with my Father-in-law in his machine shop for 3 years and loved it. Learned manual milling and FANUC coding. I know old school compared to multi axis machining now. Keep making chips. 👍
@corvid_lenore
5 ай бұрын
i have been addicted to this channel. its been like a week straight watching videos whenever i can to get caught up. Love the dedication here and your skills are commendable.
@anthonyrivers8395
Жыл бұрын
Wow, great PLAY BUTTON!!! Well deserved 🎊 🎉.
@InheritanceMachining
Жыл бұрын
Thank you 🙏
@PatrickHoodDaniel
Жыл бұрын
Congratulations on the KZitem following level you reached in such a short time! I have been making videos for 15 years on KZitem and I have half the following you do. It is quite a feat and shows that high-quality videos go a long way.
@InheritanceMachining
Жыл бұрын
I really appreciate that. This grew way faster than I ever expected! Thank you 🙏
@JBMetalShop
Жыл бұрын
Truly inspiring, i am a mechanical engineering student and a machinist hobbyist, I love getting inspired by your videos! They help me see what is possible for anybody who puts their mind to it! Thank you for making videos, they add so much to the community.
@InheritanceMachining
Жыл бұрын
That is so mice of you to say. Thank you!
@girliedog
Жыл бұрын
Congradts on the 100K Tubers we appreciate the authentic perspective and high value content your are sharing with us. It's because of you I purchased a drafting machine for my antique drawing board.
@InheritanceMachining
Жыл бұрын
You are very kind and I love to hear that! Thanks as always!
@Horus9339
Жыл бұрын
Great work once again, your Grandfather will be very proud. Thank you for sharing your time Sir.
@InheritanceMachining
Жыл бұрын
My pleasure. Thank you!
@alangliniak9514
Жыл бұрын
Those mini pallets are super useful, I built a couple of them a while back and I used them a lot more than I would have thought.
@InheritanceMachining
Жыл бұрын
That's encouraging to hear. I don't have anything in particular in mind at the moment but now I have it when I do
@therealdisston
Жыл бұрын
This is now my favorite machining channel. Your explanations are perfect. The journey is there for all tho see. But what makes it different is your personality and easy to listen to voice.
@InheritanceMachining
Жыл бұрын
I really appreciate that. Thank you!
@leviwiseman9753
Жыл бұрын
I've loved your channel for a while. It's heart-warming that you're continuing your Grandfather's legacy.
@InheritanceMachining
Жыл бұрын
Thank you 😊
@weirdfishees1
Жыл бұрын
Hi Brandon, I'm from Georgetown ky. My dad was a tool and die maker, however he passed away last September. I've decided to follow his tool and die footsteps though! I'm 1 semester in through school, and I've been working at die Manufacturing at Toyota. I love every minute of the field, and I love your videos too! Keep up the great work!
@InheritanceMachining
Жыл бұрын
Thank you and so sorry for your loss, man... You've found yourself going into a rewarding career for sure. PS, you are less than an hour from me
@joelawton123
Жыл бұрын
I know it’s a pointless comment but I love this channel. I don’t care what your video’s are about, I open it knowing I’m going to love it. Inspirational, I want to machine stuff 😃
@InheritanceMachining
Жыл бұрын
That's not pointless at all. I appreciate it very much!
@slartimus
Жыл бұрын
The KZitem plaque box is pretty distinctive, which had me thinking, "What's he going to do with that?" Then, when you started blue-taping off the play triangle, I was like, "Is he gonna---??" Realizing that yes, you were going to chamfer the triangle was very much a moment for a joyous shout. Congrats, Brandon, you glorious SOB. 😁
@InheritanceMachining
Жыл бұрын
😂 😆 Thanks, man!
@illie7w
Жыл бұрын
Yet another great video. I watch quite a few homeshop videos on KZitem. You are a breath of fresh air. You do everything from the design to the complete job. We'll done
@InheritanceMachining
Жыл бұрын
Thank you 🙏
@benriser4018
Жыл бұрын
I’ve been watching through your entire video catalog over the last…we’ll say while cause I don’t want to admit my binging, and I have been trying to wrap my head around how to use a lathe to perform milling operations. The “what’s a mathe” chapter finally made it make sense in my head. Not owning either machine or having access to them has given me a bit of trouble when trying to understand how that might work. Thank you. P.S. your inspiration for this channel, grandfathers inheritance, is incredible and production quality has been stellar from the start. Keep going!
@vincei4252
Жыл бұрын
13:16 "What is a Mathe?" I have some old British model making books. There were model makers that did ALL of their machining on a lathe as they didn't have a mill in their small shops. Some of the fixtures they came up with to do what would be a snap in a mill were things to behold. Adversity is the mother of invention!
@jaxithfox
Жыл бұрын
McMaster is truly a God send of a site. Almost anything you could possibly need and incredibly fast shipping.
@ronbuckner8179
8 ай бұрын
It’s a pleasure to watch what you bring, we should be thanking you.
@danrexbonaobra9388
Жыл бұрын
Good day sir i have to say i really appreciate the way you show how you try to make your projects as precise as possible and not just settling for "good enough" i have always thought to my self "how is this simple tool made ?" and as best as i can see your work is equal to that that i have encounter made thru CNC machining i just love how you manually adjust to get to the smallest measurement i hope you that you upload more projects including "side projects" as well
@InheritanceMachining
Жыл бұрын
My pleasure. Thank you for the kind words!
@jensonhartmann3630
Жыл бұрын
The little note, tribute to your subscribers, and your grandfather...earned a sub from me. Amazing work!
@InheritanceMachining
Жыл бұрын
Thank you 😁 Welcome!
@davidmoffitt981
Жыл бұрын
OMG that is SO WHOLESOME and touching. I'm in tears, what a reveal, CONGRATS!!!!!
@ChristophLehner
Жыл бұрын
That popping sound of the gauge pin never gets old 😅 Top video as usual 💯
@InheritanceMachining
Жыл бұрын
I know, right? 😂 Thanks as always Christoph! PS, Hope all is well. Patiently awaiting your next upload!
@ChristophLehner
Жыл бұрын
@@InheritanceMachining I'm doing well and I'm glad to hear that you're looking forward to my next video. I'll do my best to make it worth the wait, it always takes twice as long as expected. PS: congrats on the 100k 👌👌
@InheritanceMachining
Жыл бұрын
@@ChristophLehner Oh I know how that goes... 😂 Thanks man!
@NickiRusin
Жыл бұрын
Time to finally see the fly cutter in action, and that ridiculous lathe setup, too. Also I gotta say the silver plaque is well deserved. Here's to a quick journey to 1 million!
@InheritanceMachining
Жыл бұрын
Thanks, Nick!
@cjfrew9398
Жыл бұрын
With all the discussion around flatness and cylindricity, I would love to hear this man talk about GD&T and machining to them
@ThePhoenixAscendant
Жыл бұрын
After a hard day at work, coming home and listening to your baritone voice as you show off your latest project is just fantastic. Very relaxing to watch and also very entertaining. I look forward to seeing your next project! Have a wonderful day!
@InheritanceMachining
Жыл бұрын
Thank you so much!
@ColinsMarine
Жыл бұрын
As one that has been watching from pretty early on, let me say thank you for the more realistic view of projects, few steps forward, one back. I might suggest that you start planning you project for your million sub plaque now…it won’t be long.
@InheritanceMachining
Жыл бұрын
Thank you, Colin 🙏
@tjkendall48176
Жыл бұрын
Your hand drafting takes me way back to high school and university. A dying art.
@artszabo1015
Жыл бұрын
I began my machine shop experience in 1966 and I have been around some damn good machinists since then and I am here to tell you that I am thoroughly impressed with your intelligence, skills and the finished products to back it up. Hats off and five stars to you Sir. Art from Ohio PS I think you would enjoy watching Kurtis in Australia at Cutting Edge Engineering here on KZitem. He is absolutely amazing.
@InheritanceMachining
Жыл бұрын
Thank you so much, Art. You are very kind! Also CEE is one of my favorites 😁
@lucaspanichella6747
Жыл бұрын
Woooo well deserved silver KZitem plaque ! Always good to share your grandfather shop.
@InheritanceMachining
Жыл бұрын
Thank you!
@bdgackle
8 ай бұрын
@7:14, Watching that thing emerge from the left side of the cutter as a mirror was possibly the most satisfying thing I am going to see all day Edit to add: Nope. @16:34. *That* is the most satisfying thing I will see today.
@RAD-RC
Жыл бұрын
The only KZitem channel without a single dud video, amazing to see! Perfect timing too as TOT has had to take a break for most of this past year. Totally different style and I love it!
@InheritanceMachining
Жыл бұрын
I really appreciate that! Honestly I'm hoping he makes an appearance soon 😂
@FNmey
Жыл бұрын
No thank you Brandon for sharing all of this with us and making some really cool things in the process. Got me into lathe work next to my 3d printers and I love it! Well deserved!
@InheritanceMachining
Жыл бұрын
That's awesome, Felix! Thank you!
@JoshuaRosaaen
Жыл бұрын
Congrats...thank you for taking us on your journey.
@InheritanceMachining
Жыл бұрын
It's been my pleasure. Thanks for following along!
@thecake._.wasalie
Жыл бұрын
So much to learn in just 23 mins! Not a moment of boredom. See you in the next one!
@InheritanceMachining
Жыл бұрын
Thanks as always, man!
@AdmiralTymothysLootChest
Жыл бұрын
Who doesn't love a good chamfer? Congrats on the silver play button!
@InheritanceMachining
Жыл бұрын
😁 Thanks!
@wulfdont7011
7 ай бұрын
to allow clamping wider items , you can move the vice jaw plates to the back edge of the vice on both ends this also allow the top flat edge of the vice to help support the span. sacrificial jaws or special shapes can also be made as extra jaws and used in the same manor. love your channel and skills and great job!
@kailuasurfing
Жыл бұрын
I don't know anybody who doesn't love a good chamfer!! Love it.
@WoLpH
Жыл бұрын
Your productions are clickspring levels of quality. And that is definitely meant as a compliment!
@InheritanceMachining
Жыл бұрын
I take that as a very high compliment! Thank you
@RichardJohnson_dydx
Жыл бұрын
So many concepts I have learned in undergrad have been brought up in this video. Such as V = omega across r, Young's modulus (modulus of elasticity), three phase, the list goes on. The 30 year old cap was bound to fail sooner than later. Congrats on the play button!
Пікірлер: 1,5 М.