not only is this guy very knowledgeable of windows hes extremely helpful, took time outta his day to help me over the phone top notch guy right here
@AlexRubioRQualityGlass
4 жыл бұрын
bigtom388 thanks for watching!!
@davidb7294
Жыл бұрын
Impressive; quick clear complete explanation. Very helpful. I did not find this anywhere else. Thank you!
@1wasinAlpha
3 жыл бұрын
Very informative and NO BULLSHIT video! Thank you!
@tamarab5751
5 жыл бұрын
Clear & straightforward, thanks!
@nosloppyagape
5 жыл бұрын
One of the few videos on KZitem thank you so much man!
@Noaxe_Tegrinde
5 жыл бұрын
Great job Alex and thank you. Very interesting. I am surprised that there is so much manual work involved with this process, in these days of automation. I would have thought that there would, at least, have been an adjustable clamping jig on pivots to make handling easier. Cheers NoAxe
@AlexRubioRQualityGlass
5 жыл бұрын
Noacks Tegrinde thanks! And big manufacturers do have those machines, but most glass shops that replace your home windows won’t have some of that stuff. Again thank for watching
@davechapman7735
4 жыл бұрын
thanks for showing. great job sir
@RT69hemicharger
4 жыл бұрын
Alex. One of the BEST informational videos I have seen on YT! Thanks for the great tips. All the best!
@AlexRubioRQualityGlass
4 жыл бұрын
Karl 3% thanks man thanks for watching
@clintbridges7896
5 жыл бұрын
Thank you for showing us how to do this.
@ProfessionalDad
3 жыл бұрын
Always wondered how involved this was. Thanks for sharing a professional job
@rtel123
Жыл бұрын
I would love to buy IG units that are not engineered to fail every 20 years or less if they are facing south or west and get hot. The pressure buildup on a hot day is tremendous, eventually blowing out the seal. A good way to make them is to assemble them in a chamber that is as hot as the air in the unit will be on a hot day. Therefore, they will mostly have a vacuum that pulls them together, and on a hot day, the air pressure inside the unit is about the same as outside, preventing a blowout.
@johng5295
2 жыл бұрын
Thanks in a million. Great content. Awesome. Very well explained. I couldn't find this explanation--simply put anywhere else. Great teachers are hard to find. Grade: A++💥
@stephenyoutubin4476
Жыл бұрын
Thanks Alex, much appreciated.
@basavaraj
3 жыл бұрын
Nice video bro. Well informative.
@nevinkuser9892
7 ай бұрын
That is awesome. Amazing quality job! And yeah, I don't want to burn my fingers on that stuff either!
@danialkelly4497
3 жыл бұрын
Thanks Alex, that's awesome
@rondail5675
5 жыл бұрын
Thanks Alex. I would like to see how to replace thermo-glass in a home vinyl window.
@99shujah
5 жыл бұрын
No question . but thank you for detail explanation of work. Thanks again.
@MrRaybrown007
Жыл бұрын
This is what i needed to know. Looks more complcated than I thought. I was wanting to repair my old units. But now i see I can not do this.
@rastaman7260
2 жыл бұрын
Thanks for this awesome video.
@The_Real_Indiana_Joe
6 жыл бұрын
Great vid!!
@edmundpunduma5791
8 ай бұрын
A very good tutorial for first timer. Much thanks. What is the hot black substance used for sealing?
@zababit
2 жыл бұрын
Thank you Alex. Great job mate! Can you please tell me where you can buy the plastic spacers?
@ricokillz2091
Жыл бұрын
It’s made of thin aluminum metal and from CRL website!
@slobodanboban8717
3 жыл бұрын
Thanks man! That black stuff is Silicon based glue?
@trankt54155
2 жыл бұрын
Good video and thanks for posting.
@mrharlemike28
3 жыл бұрын
Great video! Exactly what I was looking for. Whats the average measurement of the glass thickness when making double pain windows?
@AlexRubioRQualityGlass
3 жыл бұрын
If it’s a vinyl window they are usually 3/4 inches thick if there are aluminum they can be anywhere from 7/16 to 5/8 thick
@OpenG145
6 жыл бұрын
Thanks Alex!
@anthonycarr6624
3 жыл бұрын
you sir are the man.
@moisesgalavizdiaz228
2 жыл бұрын
Alex what are your IGU's going for.. I'am looking for something a bit customized to replace my standard IGU double pain. With one that the outside pane is made with laminated glass. 24in x 30in 7/8 overall thickness hoping for quote plz.
@jl9678
4 жыл бұрын
Thanks for this educational vid
@AlexRubioRQualityGlass
4 жыл бұрын
big O thanks for watching!
@rrsp253
7 ай бұрын
Very helpful. I have a couple windows and don't have the budget for the glue gun system. Is there a sealant you can recommend ? Thanks
@efyish
5 ай бұрын
Impressive. What about moisture treatment, how do you apply it
@Hutchy45445
4 жыл бұрын
Neat to watch how they're made. Does your spacer come with the dessicant already in them? I didn't see you add any....
@AlexRubioRQualityGlass
4 жыл бұрын
Hutchy45445 I did put the dessicant in there myself I just didn’t put it on the video
@vincentking8267
2 жыл бұрын
This is awesome, but damn if those hot melt systems are expensive!!!
@Bob22.09
Жыл бұрын
Thanks for the great video. What kind of gas is between the glasses?
@SansP3ur
3 жыл бұрын
Really cool. Is there an alternative to the insulation you injected that can be purchased online or at a big box store?
@AlexRubioRQualityGlass
3 жыл бұрын
It’s called super spacer foam and metal sealant and it’s like 8$ a tube and yes you can get it online
@domenicsandri2740
2 жыл бұрын
What is the tool you used? Hot melt gun? Is it silicone you put along the sides? I have some old windows that have begun to leak. The duo panes have come loose. I would like to repair them instead of replacing them. Is it possible to clean off the old material off the spacer, replace the desiccant (what is it and where do you get it?) and then remake the insulated unit? Thanks.
@LuisReyes-wy1qt
3 жыл бұрын
hello, nice video, do you think it can work auto glass urethane? instead of your hot melt?
@sf3986
5 жыл бұрын
Alex did you know where to buy the good frame I have a picture window and the frame is damaged by the water and to order the all window is little expensive so I trying to find just the frame. Thanks
@happyrecluse2849
7 ай бұрын
Hey Alex, great vid. I'm looking for a vid on removing and possibly straightening a frame section that appears to be bent. Didn't want to just get a big honkin clamp and squeeze the frame back as the rubber seal between the sealed unit and frame needs to be aligned properly our it's just going to get jammed up and damaged. Clear as mud??? Thanks for any advise. Do you provide service calls for this type of repair??
@daylightintheswamp9315
2 жыл бұрын
Interesting. Thank you.
@kunihirajane5559
4 жыл бұрын
That was great
@shaynelugo4999
3 жыл бұрын
Alex what hotmelt machine and what tips do you have?
@pbv61
2 ай бұрын
Is there a substitute for the hot melt if I'm going to fix my window at home. It's an older aluminum slider, dual paned. It has condensation between panes. I know I can get out of from and open frame. I was hoping just to use black silicone sealant around edges and let it harden. Is there a specific tubed sealant for this?
@jedidiahlawton2149
2 жыл бұрын
❤️❤️❤️🙏 this has always been some sort of black majick mystery to me thank you
@spaken2768
Жыл бұрын
Do you flush the window with dry air or some kind of gas to prevent condensation?
@topherdean1024
3 жыл бұрын
Great vid, thanks. Questions: 1. Can I use silicon caulk instead of hot melt and leave it clamped until cured? 2. How do you prevent moisture from being trapped inside? I would think if it was even humid out, that moisture might cause condensation? 3. Can I make wood spacers and paint them?
@AlexRubioRQualityGlass
3 жыл бұрын
Great questions. Silicone will work, not recommend but I just don’t know how long it will hold compared to the hot melt . Secondly I’m getting ready to post another video with the whole process, the spacer does have desiccant that Absorbs the moisture. And last I’ve never tried wood spacer but I don’t see why it would not work for quick and cheap fix
@AlexRubioRQualityGlass
3 жыл бұрын
Stick around and within the next 2 days I’ll be posting my other video
@topherdean1024
Жыл бұрын
@@AlexRubioRQualityGlass Thank you Alex!
@forwardtothepast2411
3 жыл бұрын
so satisfying to watch
@etienne7774
Жыл бұрын
There's a video where there's a membrane on outside wall allowing for air flow but where moisture can't come in. What's your view on that? Better than insulated panels?
@codemontana
5 ай бұрын
Nice work
@Nuprem1z
2 жыл бұрын
My old house built in the 70's has single pane aluminum frame windows. My question...do they make thinner spacer material or is there an alternative approach for my older aluminum frames? Recommendations?
@zedzed1046
2 жыл бұрын
In the U.K we can get a 4mm glass, 6mm spacer, 4mm glass unit, so 14mm would be a thin unit for wooden frames or retro fitting, normall units a 4/12/4 so 20mm in plastic frames, I have no idea what the gap is in alloy frames.
@Bespokespaces
2 жыл бұрын
Hi Alex. Thanks for making the video. I have had some double glazed units made up that I am going to fit into a wooden framed porch I have made. The six pieces came with black gaffer tape stuck around the edges and overlapped onto the glass face. Is it OK to remove this before fitting it into the frame with weather seal adhesive tape? The gaffer tape is puckered at the edges which reduces the snug fit against the frame. I wasn't sure if this tape aids in keeping the glass together. After watching your video it seems the hot filler is sufficient and the gaffer tape is just applied to protect the glass edges in transit. I'd be interested in your comments. Thanks...
@AlexRubioRQualityGlass
2 жыл бұрын
Yes. It would be ok to remove it the sealer is significant for the seal
@Bespokespaces
2 жыл бұрын
Thank you Alex that's very kind of you to reply so quickly.
@williamjohnson5215
3 ай бұрын
Alex, Thank you for posting such a great video. I am from the manufacturer of the machine you are using and have looked into our system, but I do not find your company name in our system. Please let us know if we can be of any assistance to you or if you have any questions. Thank you, Bill from Hot Melt Technologies.
@burlesoa
3 жыл бұрын
Would it be possible to rebuild a 7' x 9' picture window? It's high on a second floor and it's hard to find someone that thinks they can get it installed 25' high. I've been wondering if the current glass could be cleaned and rebuilt and replaced using scaffold. I realize it's sounds easier to get a new one, but using the glass that's already in the house, might work better. Great vid. Thanks!
@AlexRubioRQualityGlass
3 жыл бұрын
How to separate two panes of glass. Search this up on my channel and it shows you how someone can separate the 2 panes of glass if you wanna reuse what you have
@rickstard73
3 жыл бұрын
Great video, thank you, best one on the subject I have seen, do you also put a gas inside the cavity?
@AlexRubioRQualityGlass
3 жыл бұрын
Not the ones we make at the shop, we have to order those.
@pyrothefirst
2 жыл бұрын
Adding gas is easy. I make my own double and quadruple glazed windows, argon filled. Great video too 😀
@johnkang2000
11 ай бұрын
Thank you for this. I really wanted to know how double glaze is done. Just one thing though, is there no need for desiccant between the glass? For fogging up.
@AlexRubioRQualityGlass
11 ай бұрын
Yes there is! I have a different video where I am putting desiccant inside the. Aluminum spacer
@georgelowellohhdgg63nnd96
4 жыл бұрын
What is an alternative to Hot Melt industrial glue for a hobbyist? (what is the purpose of the hot melt glue?) Excellent video
@aslamasim2348
4 жыл бұрын
george lowellohhdgg63nnd the purpose of glue is to hold the spacer and glass together, no air letting inside the glass , to lesser the weather effects.
@fritzmarsden5707
2 жыл бұрын
what type of gun is it that your using to seal the windows. I want to buy one in the UK.
@manishkolambekar3136
Жыл бұрын
Great job done , make one more video how to make spacer.
@alejandrocaraveo267
4 жыл бұрын
I want to make my own spacer and would like to know how much smaller is the spacer than the glass panes. I assume there needs to be a certain amount of space between the spacer and the edge of the glass for the adhesive to seal properly. Also, what is a good hot melt alternative adhesive that a DIY'er like myself can use? Is silicone caulking that you can get at the local hardware store good enough? Thanks! Great informational video Alex!
@AlexRubioRQualityGlass
4 жыл бұрын
Alejandro Caraveo the spacer is usually cut down 7/8 of an inch smaller than the glass size but if you reallly wanted to you can make it an even inch smaller than the glass. And no silicone is not recommended but some glass shops might be will to sell you some super spacer caulking and you just need a regular caulking gun and just wait a few days for it to dry. The hot melt just makes it to where we can go install it as soon as it’s done
@AlexRubioRQualityGlass
4 жыл бұрын
Alejandro Caraveo but not all glass shops carry the super spacer caulking
@alejandrocaraveo267
4 жыл бұрын
Thank you Alex! 👍
@rusmiling9909
Жыл бұрын
Alex it’s always bothered me that we are a replacement society, no trying to fix anything and that is so wasteful IMHO! Thank you for this video. I have a couple of foggy windows from my 1980s built home and wanted to fix rather than replace. I bought RDI’s Butyl Rubber Sealant to reseal glass after cleaning, what do you think about that material ?
@brandonGCHACHU
3 жыл бұрын
Pretty cool
@krisgorr3439
2 жыл бұрын
Alex, I'm starting a window pane replacement/repair company. I'm new so I do need training and these videos helped me with more ideas. I used to be a builder but the body is not as it used to be. The repair company I want to use drills holes on the exterior and you use special patented vents and this dries out the descendent and keeps it dry . This will allow the window to stay clear with a 20 year warranty. Or if it's too far gone replace the IGU. I'm wondering is I can have a shop to make my own IGU or is it worth it? I guess you have to see what you can get materials for and figure out the labour and whatnot. But for emergency repair you could offer a 24hr service with a higher mark up that's all. What I've read/learned is that Argon gas is somewhat overrated. It saves minimal and the costs out way the savings so why bother? After 3-4 years the gas is out due to solar pumping anyway. Trust me I've been in construction over 30 years and always put Argon in my windows because that's what everyone does. But getting into the anatomy and understanding windows more now I don't see the purpose. Any help/feedback would be greatly appreciated. I'm in Canada, so we go from -30 Celsius to + 30 Celsius. Sorry for the long question.
@AlexRubioRQualityGlass
2 жыл бұрын
We feel the same about argon gas. As long as you go with a soft coat of low e glass that’s is usually good enough, and the hot melt machine is definitely worth it especially for emergencies like you said when people don’t wanna wait days for a replacement. We get most of our stuff from crlaurence you can look up the website for IGU materials
@krisgorr3439
2 жыл бұрын
@@AlexRubioRQualityGlass Awesome thanks for the reply and I'm going to start watching videos once a night to gather information. Very thorough, very good videos and willing to help a northern neighbour. THANK YOU!!! EH!!! Lol
@TheDRocafella
Жыл бұрын
How long do you let the butyl cool down before it's dry?
@misgierach9241
2 жыл бұрын
The video is helpful. Where can you buy the spacer?
@barbudabob1
4 жыл бұрын
Where would you get a hot melt gun, spacers and do you put argon inside? Thank my man great video!
@AlexRubioRQualityGlass
4 жыл бұрын
bob jesse we don’t have the equipment for argon gas. The hot melt I believe CRL only sales to accounts they have but you might be able to find one online somewhere, and the spacer u can try your local glass shop
@Lysy247
4 жыл бұрын
@@AlexRubioRQualityGlass what can i use instead of hot melt? I need to fix my windows problem at home
@AlexRubioRQualityGlass
4 жыл бұрын
Lysy247 there is a product called super spacer but not all glass shops have it you can probably get online and it comes in a roll and seals the glass really good.
@francob4148
7 ай бұрын
Is the a grade or standard for the glass you used?
@kerryprater9167
6 күн бұрын
Hey Alex, Dow do you create the vacuum to stop condensation?
@marcisaacs9407
Күн бұрын
Really Love the idea of making your own but, For my asking but what about humidity inside if you live in the North East during winter.
@wanjagilbert7325
Жыл бұрын
Thanku Alex i think i have much to learn from you.
@jimflood6550
8 күн бұрын
Good video, appreciate the lesson on how windows are made.
@jonfostersmith
4 ай бұрын
Good clear video! I was wondering, isn't there some argon gas to go inside it, to make it insulate? How do you do that? Thanks
@UrzDADDY
Жыл бұрын
Do you add any gas (argon, nitrogen) between the window panes?
@nooradams9658
3 жыл бұрын
Can one use silicone no hot melt is available, or any other sealant you'd recommend? Tia
@nicbray1673
3 жыл бұрын
877 sealant from CRL. Thats what we use to make units in the field
@ronconklin7778
Жыл бұрын
Hi Alex, thank you for this info. Does CRL sell the spacer material?
@AlexRubioRQualityGlass
Жыл бұрын
Yes they do but I believe you have to have a business account setup with them! You can try your local glass shop some may be willing to sell to you
@DrMurphy2273
3 жыл бұрын
Good job
@middobass6766
4 жыл бұрын
Hi, great video. So the sealant bead is strong enough to keep the 2 pains and spacer together, before installing the window, is that correct?
@AlexRubioRQualityGlass
4 жыл бұрын
Middo Bass correct
@ModitRC
3 жыл бұрын
How do you get the moisture out before sealing?
@harrypalmer7572
2 жыл бұрын
the spacer bar is filled with a load of small beads called desiccant. it absorbs the moisture inside the unit after its sealed
@diegotube10
5 жыл бұрын
Thanks for the video Alex! Where do you buy the sealant (and what name is it) and where do you buy the spacer and the desicant balls? Thanks for your help!!
@AlexRubioRQualityGlass
5 жыл бұрын
diegotube10 actually we order it from our supplier CR Laurence
@2barearms
5 жыл бұрын
CR Laurence is a good start for glass supplies and tools.
@mleibel4
4 жыл бұрын
The best is Adseal 4580.
@oldporkchops
4 жыл бұрын
Hi Alex, Thanks for sharing this video. It looks too advanced for a homeowner like me who wants to make my own windows. Or can the glass, frame, and equipment be bought and the skill learned? Do you ship to Atlanta, GA? Thanks.
@AlexRubioRQualityGlass
4 жыл бұрын
oldporkchops Glass and frame can defy be bought but the equipment most likely not and sorry no we don’t do any shipping
@thebluelunarmonkey
3 жыл бұрын
I gave measurements to D&S Glass in Marietta, the made the IGU to order! If you haven't gotten around to it.
@oldporkchops
3 жыл бұрын
@@thebluelunarmonkey Thanks so much for this info.
@thebluelunarmonkey
3 жыл бұрын
@@oldporkchops saw the atl mention so thought I'd help out. I have aluminum frame windows, the IGU fits in a rubber gasket, so i didn't need any extra parts. If you have vinyl windows, with doublesided tape on the inside, snap-in plastic frame on the outside, you will need to scrape the old tape and apply new tape. The glass company might sell that tape, otherwise amazon the glazing tape. For the IGU, you need to measure exact thickness of the IGU so they can make the spacer the correct width, also the design of the muntin, and exact width and length of the glass. I think a standard window size IGU was around $100 about 5-7 years ago. I got 3. No inner condensation on any of them yet
@oldporkchops
3 жыл бұрын
@@thebluelunarmonkey I truly appreciate this level of detail. I'm planning to make my own wood (wood + aluminum if I can find an exterior aluminium frame to fit the wood) windows. All this info is extremely helpful. D&S Glass in Marietta will definitely come in very handy. Were the three IGUs you got 5-7 years ago double glazed? Any chance you remember the U value on them? Thanks.
@OVI-Wan-Kenobi-8
5 жыл бұрын
Is there a way to cut through the black sealant later on if we need to replace one of the glass sides? If yes, what do you recommend using to cut through it?
@AlexRubioRQualityGlass
5 жыл бұрын
OVI-Wan Kenobi yes there is, and what I recommend is a utility knife. Mine is 18 inches long so I can get some leverage. We just call it a long knife
@beechenlee
5 жыл бұрын
@@AlexRubioRQualityGlass What kind of sealant do you recommend for putting the glass back if I take one of glass side out?
@crisgecko
5 жыл бұрын
@@beechenlee its honestly easier to just build a new IGU. Once you cut open the current one, you are compromising the seal/risking glass breakage. Even if you butyl it back up, the spacer still has a shelf life. Which, for these kinds of spacers, is about 10 years
@dwightlee6164
4 ай бұрын
What is that you put inbetween? Hot melt glue like normal one ?
@mehrourbadloe8339
2 жыл бұрын
Hi where can I buy the pacers and sealing equipment And if insulated does the glass don't need argon filling in between ??
@MrJoecass42
3 жыл бұрын
Nice video Alex. Since I don't have the heat gun would I be able to use clear silicone the same way you used the black caulking?
@AlexRubioRQualityGlass
3 жыл бұрын
They sell caulk tubes it’s called silicone foam metal insulating glass sealant
@AlexRubioRQualityGlass
3 жыл бұрын
Check online you def wanna use the right stuff
@MrJoecass42
3 жыл бұрын
Hey thanks so much Alex! I appreciate you getting back to me sir.
@AlexRubioRQualityGlass
3 жыл бұрын
It definitely take a while for it to cure compared to the hot melt
@MrJoecass42
3 жыл бұрын
I bought the correct foam metal caulk you spoke of...thank you. I'm not clear where you get the spacer. Any advice Alex?
@ryujiyamazaki583
9 ай бұрын
Thanx for the nice video, what is that black thing called what you are putting on the sides of it?
@ohnenamen8034
3 ай бұрын
Nice video. Whats about argon gas?
@LumberHoward
3 жыл бұрын
What brand is the spacer? Being lined with a desicant makes it a game changer for fogging. Is the product really available?
@AlexRubioRQualityGlass
3 жыл бұрын
We order it from crlaurence!
@LumberHoward
3 жыл бұрын
@@AlexRubioRQualityGlass Thank you so much.
@JC-cn6ty
3 жыл бұрын
Hello Alex. How much do you add when you measure glass side by side without the stops? 7/8 or 1 inch man. i am trying to build a double pane without removing the old one yet.
@AlexRubioRQualityGlass
3 жыл бұрын
It’s usually an inch but to be safe you can add 7/8 to your daylight size
@JC-cn6ty
3 жыл бұрын
@@AlexRubioRQualityGlass thanks bro Great video! Gracias
@babystar3
9 ай бұрын
what you used on specer bar double type or butyle ?
@NelsonCraft-cx1bx
Жыл бұрын
very good video info I was looking for .Now if I could only get in touch with Alex
@AlexRubioRQualityGlass
Жыл бұрын
What can I help you with
@bjnopoli
Жыл бұрын
Hey do you make these and ship them ?
@aleemuddinahmed1745
8 ай бұрын
How can we select airgap, i mean spacer thicknes. Any formula or guidelines?
@martincantu6162
2 жыл бұрын
hello my name is Martin out of Houston Texas. i make stained and leaded glass. i am intrested in making ig units with my glass i would like to know where i can get the hot machine and the aluminum spacer
@Hundert1
7 ай бұрын
Can this be done using acrylic window instead of glass? Where do we buy the spacer? How does 1/2" acrylic single pane compare to same in glass as far as insulation properties? Thanks
@KBBAKTHA
3 жыл бұрын
Very nice instructional video. Is it not necessary to create vacuum in between the glass panes to avoid clouding or condensation during colder nights?
@AlexRubioRQualityGlass
3 жыл бұрын
Clouding in between panes happens when the seal is broken and condensation happens on the inside part of the window if there is not proper ventilation in the house. Sometimes when we replace old windows with new ones you’ll still get condensation inside without proper ventilation
@mariocalcos5500
4 жыл бұрын
Hola!! muy buen video!! como se llama la maquina para realizar ese trabajo??
@AlexRubioRQualityGlass
4 жыл бұрын
En spanol no se. pero en English se llama hot melt.
@trippylarry8409
4 жыл бұрын
I have the same butyl machine lol cool stuff. Only difference is we use super spacer & not the aluminum
@AlexRubioRQualityGlass
4 жыл бұрын
Trippy Larry nice! We use super spacer when we go a long distance to a job site and we do it them on site!
@trippylarry8409
4 жыл бұрын
alex rubio nice. Ya we manufacture the units on site. We call it Instaglass lol
@AlexRubioRQualityGlass
4 жыл бұрын
Trippy Larry I might have to start using that word too!! Lol
@yobaafett
Жыл бұрын
what is this black stuff and how can you remove it from a glass window? I have separated 2 panes from a double glazed panel but i'm having trouble getting the black sticky stuff off.
@Jobrown391
Жыл бұрын
What is the gun that he is using? It’s a hotmelt gun and what are the spacers material made out of I’m trying to do this myself but I am super novice.
@ahalzind
4 жыл бұрын
Hi Alex. Where do you buy that spacer from? Thanks
@AlexRubioRQualityGlass
4 жыл бұрын
ahalzind you can try your local glass shop
@crisgecko
5 жыл бұрын
Great video! I noticed you dont wipe the edges of spacer with denatured alcohol before butyling, have you had any issues with seal failures because of it? Have always done it as a precautionary measure but not sure if its necessary
@AlexRubioRQualityGlass
5 жыл бұрын
Cristian Pike no I haven’t had any issues. When I do it more because of a bad deal where maybe I missed a little spot
Пікірлер: 584