Top quality video, Charlie - watch, listen & learn.......and take notes!
@ChadwickModelRailway
6 жыл бұрын
Hi Randal, I’m so pleased that you enjoyed it. There is also a Part 2. Regards Charlie
@barrytillman2818
8 ай бұрын
Well done Charlie a master class in how to use super glue to stick yourself 😂😂
@ChadwickModelRailway
8 ай бұрын
Rest assured Barry, I have now discovered superglue dissolver. Have a great Christmas, regards, Charlie
@quarryjunction-1969
3 ай бұрын
Great Job. Lesson learnt careful with super glue thanks
@ChadwickModelRailway
3 ай бұрын
Thanks, Quarry Central, regards Charlie
@7APT7
6 жыл бұрын
Great to see the actually doing of it, rather than telling us it’s easy in just word form, ‘watch and learn’ is always the best way, you can learn so much just by watching someone doing it, so to watch a true professional like yourself to do a ‘Show n Tell’ as been great! For me, I get a little nervous about getting it wrong or cut to much off etc, so it’s been great to see videos like these! More of these helps those that are unsure how to go around doing it, makes it that bit easier, giving us the confidence to have a go. Thank you for sharing that with use all to see!
@ChadwickModelRailway
6 жыл бұрын
Hi Jamie, I’m so pleased that you enjoyed it. Sometimes it’s just a case of going for it and stuff the consequences. Regards Charlie
@7APT7
6 жыл бұрын
Yes I see grabbing the bull by the horns is good, I’ve watch few modellers over my time, and I have learnt so much just by watching someone else, you may be equally afraid of making a mess out it all! Which to be honest from my stand point as a watcher, rather you than me 😆 but to watch you do more complex modelling like you do, especially if it costs you an arm and a leg, then rather you than me doing it! I’m not to confident myself personally, which is why I can watch your channel over and over to build my own confidence in doing something that you have made look all so easy! keep up the KZitem ‘How To’s’ / ‘Hints n Tips’ or ‘Show n Tells’ methods of doing modelling! You inspire all I’m sure, you do for me, anyway! I’m sure there are more of me watching you that are less confidence modellers than there is of you, however professional you come over, even though inside your holding your breath in hope it doesn’t ping off... Thanks Again!
@ChadwickModelRailway
6 жыл бұрын
Jamie, you’re too kind, but a great motivator. Regards Charlie
@kenrobertson9048
7 ай бұрын
Hi Charlie, watched this video again as enjoyed it first time, Just a tip i use and it works. Buy some grease proof paper and when you r using superglue use that to put your work on and the superglue wont grip very well to the grease proof paper and you can just peel it away. Leave it to 1 side and any glue left on it will have dried and it can be re-used. Hope that helps.
@ChadwickModelRailway
7 ай бұрын
It’s an old video Ken, and I have learned a great deal since then. I tend to use polythene. Regards, Charlie
@robinabbott6164
4 жыл бұрын
To strengthen 90 degree angles I use a few old Lego bricks.. Great video as usual. Happy Christmas.
@ChadwickModelRailway
4 жыл бұрын
Thanks Robin, I’m so pleased that you enjoyed it, I do hope that you have a great Christmas, regards Charlie.
@vernongardner1958
6 жыл бұрын
Hi Charlie, Really liking your videos and easy, informative, all inclusive, presentation style. I've often super-glued my fingers together, or to the things I'm trying to glue. A couple of tips for you. 1. Cellulose thinners (or nail varnish remover but ask the owners permission) can help soften the superglue if you don't want to cut off a layer of skin. Just work it in and gradually ease the fingers apart. It takes a bit of time but prevents bloodshed. Afterwards a good pumice stone can get any remaining off. 2. I found superglue doesn't stick to some plastics (bags etc.) so you can use pieces of that to hold items to avoid getting glue on yourself, but first test the plastic just in case it's the sort that will stick. Now to view part 2. :-)
@ChadwickModelRailway
6 жыл бұрын
Hi Vernon, I’m so pleased that you enjoyed the video. I must confess, it was funny when I glued my fingers together and I’ll take your advice and acquire some solvent. Regards Charlie
@williamhawkes7437
5 жыл бұрын
Hiya Charlie, and excellent video as always, but can I just say that if you get stuck with superglue, run your stuck fingers under as hot a water as you can bear and that will loosen the glue.... the other thing to have on hand is acetone or an old fashioned nail polish remover as this will dissolve the glue for you. I hope this helps! What I would say also is that where you added a sheep of plastic on the back of a joint, with modern cyanoacrylate glues (super glues) it really wasn't necessary, believe it or not, these glues are actually strong enough not to need this. Again i hope this helps.
@ChadwickModelRailway
5 жыл бұрын
Hi William, many thanks for your tips. Regards Charlie
@sandwelljunction6337
5 жыл бұрын
Thanks for the video Charlie, a very interesting watch indeed
@ChadwickModelRailway
5 жыл бұрын
I see that you have watched Part 2 to. Good luck with your layout. Regards Charlie
@myyoutubeacct4880
3 жыл бұрын
Wonderful as usual. Two points though. If you can arrange it have the Dremel cutting tool arranged such that it is spitting out dust and pieces of the thing being cut away from you. Secondly, if you stick your super glued finger(s) into a bowl of water that will instantly set the super glue, and leave it quite brittle. After that you should be able to easily separate fingers from attached item, or even your own two fingers, as I have managed to do in the recent past. So you can dodge having to mess around with a scalpel. YMMV.
@ChadwickModelRailway
3 жыл бұрын
Interesting points and have acquired a superglue solvent which is always to hand.
@myyoutubeacct4880
3 жыл бұрын
@@ChadwickModelRailway Excellent. A very good idea. I have spent a lot of my life around heavy machinery and electrical systems that ran up to 69KV in power. Make a mistake with 69KV and you will be in the next world instantaneously. A good friend of mine tangled with a mere 18KV. Took him a lovely 16 hours to die. I had nightmares for two weeks, even though I was not on the scene when he got almost turned into burnt toast by a mere 18KV. I am quite sure that in your time in the Royal Navy you saw plenty of dangerous situations and stopped things from going awry. I deeply respect your past history, and am amazed at the wonderful videos and ideas you present. If you think this to be sucking up, well mate, you are wrong. My grandfather fought in the 8th British Army at a little train stop called El Alamein. He fought despite being a hemophiliac. One serious wound and he would have been dead. I did not know about this until my brother told me about that and my already very high level of respect for my grandfather rose even higher. Sorry to not be discussing trains in this instance, but history haunts me. That is all I will say on this subject ever again. Back to your excellent work with Chadwick Station and good on you for your time in the Navy. Much appreciated.
@lesliehollis8688
2 жыл бұрын
Another great Video as a newbie and not having tools (ie) air brush it would be helpful if shown other methods of painting buildings and walls thanks keep up the good work
@ChadwickModelRailway
2 жыл бұрын
Hi Leslie, that's a very earlly video and I'm sure that there are others that do. Regards Charlie
@kevinscreen1877
3 жыл бұрын
Thank you,,,,,,,watching and learning
@ChadwickModelRailway
3 жыл бұрын
Thanks Kevin, it’s great to have you on board. regards Charlie
@Otherry
5 жыл бұрын
Enjoyed the video very much. Would suggest you get some surgical gloves (better than sticky fingers:-) ) also clamp items that are to be cut again (better than lost fingers). Keep up the great work and thank you.
@ChadwickModelRailway
5 жыл бұрын
I’m so pleased that you enjoyed the video Terence and thanks for the advice.
@davidcurtis5398
5 жыл бұрын
I always use a "wax paper" to keep the parts from sticking to my mat. This is the paper the wife uses in the kitchen. I don't know if you have this over there but it works for me.
@ChadwickModelRailway
5 жыл бұрын
Yes we have it, know as grease proof paper.
@CAPNMAC82
5 жыл бұрын
The thing you want with CA glue is to have CA Debonder handy. A dab on the fingertips can work wonders.
@ChadwickModelRailway
5 жыл бұрын
A very useful point, thanks.
@MrSteen12
4 жыл бұрын
Interesting to see, how you build a model building by modifying the parts. So far I only have been buildings from kits. When I glue or skrew standing up items together, I use a coupple of bricks to support the items. That works for me.
@ChadwickModelRailway
4 жыл бұрын
As long as it works Steen.
@alancowey6577
5 жыл бұрын
Buy a bottle of "debonder" for the glue and it will debond your finger from the part. An absolute must when working with high strength glues. Ask me how I know!
@ChadwickModelRailway
5 жыл бұрын
Great tip Alan.
@williambryant5946
5 жыл бұрын
great, very informative video
@ChadwickModelRailway
5 жыл бұрын
Thanks William
@schadowolf
5 жыл бұрын
Recently subscribed, catching up on your videos, outstanding channel! Appreciate the time and effort you put in to showing others tips/tricks/etc. If I may offer one for you, I have seen it in several of your videos where you use the larger 'Dremel like' tool and you turn it off and it starts hitting your table, you can buy a holder or being fiscally minded you can easily make one so you can set it down while still spinning and save your table top. aka like a solder holder, only this one for your large cutter. Also saves you a few seconds while you are taping your videos having to hold it a bit until it stops. Just a thought. Again, appreciate the videos!
@ChadwickModelRailway
5 жыл бұрын
I’m so pleased that you enjoy my videos. Thanks for the tip, I’ll work on it.
@steamboatmodel
6 жыл бұрын
Just remember Crazy Glues were originally developed as a Surgical Glue to glue flesh together.
@ChadwickModelRailway
6 жыл бұрын
...... and clearly they work very well. Regards Charlie
@laser31415
3 жыл бұрын
i did not know this. cool
@andrewwarcup684
2 жыл бұрын
I know this is an old video, but gluing the walls together you need an accelerator and the CA would set instantly.
@ChadwickModelRailway
2 жыл бұрын
Yes a great suggestion. I now have the accelerator at the ready! Regards Charlie.
@Bruno.Trains
6 жыл бұрын
Interesting An excellent video, Keep up the good work :)
@ChadwickModelRailway
6 жыл бұрын
You’re clearly having a Model Railway video binge. Good for you.
@myyoutubeacct4880
3 жыл бұрын
@@ChadwickModelRailway I claim that I suffer from a mental illness called MTS. Equals Model Train Syndrome. When at the museum, I suffer from RTS. Equals Real Train Syndrome. No cure of course and it only gets worse the older one gets.
@digitraxdad5755
7 жыл бұрын
Good to see another video Charlie, interesting topic and good to put a face to the voice mate 😄
@ChadwickModelRailway
7 жыл бұрын
Glad you liked it, I had often wondered whether to reveal my "identity".
@digitraxdad5755
7 жыл бұрын
Chadwick TMD Dave send me an email off line regarding transponding via lancashire_fusilier@yahoo.com.au
@TheDrummerman1951
6 жыл бұрын
You and superman lol
@terryholloway4307
3 жыл бұрын
Waste of paving and buffer stops, surely you have some spare plasticard ?
@ChadwickModelRailway
3 жыл бұрын
We will make our choices Terry. Regards Charlie
@theblocksmith645
5 жыл бұрын
You can make a realistic building out of bricks that is how good you are
@ChadwickModelRailway
5 жыл бұрын
Only if you go first!
@theblocksmith645
5 жыл бұрын
The thing is that I don't have any materials to do it except very rocky dirt
@jankochanowski3252
5 жыл бұрын
Hi. Is there special reason why you use Revell enamels? I heard that Humbrols are much better
@ChadwickModelRailway
5 жыл бұрын
No Jan, these paints are just what I have lying around.
@bertoverweel6588
5 жыл бұрын
A friend of us almost had togo to a docter with a tioletseet glued at his fingers with superglue.
@ChadwickModelRailway
5 жыл бұрын
A dangerous substance indeed.
@TaterRaider
4 жыл бұрын
I know this comment is late, but acetone dissolves CA (Super) glue, FYI. Think nail polish remover.
@ChadwickModelRailway
4 жыл бұрын
Very true TR. If only I knew then!
@01276
6 жыл бұрын
good video, very informative. when will part 2 be released?
@ChadwickModelRailway
6 жыл бұрын
Hi, I'm on the case but I'm waiting on some roof strips. Please bear with me. Regards Charlie
@ChadwickModelRailway
6 жыл бұрын
Part 2 is out now.
@snafu3714
5 жыл бұрын
Hi Bud. Can this kit be purchased in U. S. A.
@ChadwickModelRailway
5 жыл бұрын
I very much doubt it Snafu
@johnjames5390
4 жыл бұрын
How do you decide which glue to use?
@ChadwickModelRailway
4 жыл бұрын
I just buy various ones and try them all to see which is best.
@ScottDowneywoundedbear
3 жыл бұрын
Super glue sticks better to everything except the piece you are gluing. I hate it but it is necessary to have in this hobby.
@ChadwickModelRailway
3 жыл бұрын
I loath using it, sheer desperation.
@robot7759
5 жыл бұрын
Please always cut outside. Wearing protection while cutting and taking it of while all particles are airborne isn't very useful 😼 If you can cut the material with a power tool, dremeling the windows open shouldn't be a problem?
@ChadwickModelRailway
5 жыл бұрын
Another good point Rob.
@anthonybradford1041
4 жыл бұрын
Hi if you leave the super glue on your fingers the next lot of super glue will not stick to your fingers at all Anthony
Пікірлер: 78