Hallelujah! Thank you! I was having problems and now it works and I have sewn my first buttonholes! Thank you!
@loveandstitchesstudio
22 күн бұрын
That's fantastic! Happy buttonhole sewing! Alison xx
@slisli91
Ай бұрын
very helpful video ! thanks from Paris !
@loveandstitchesstudio
29 күн бұрын
Glad you enjoyed it! Alison xx
@mcbab51
3 жыл бұрын
Very helpful thank you. Didn’t know about the need to reset after each buttonhole. Haven’t seen that mentioned anywhere else
@loveandstitchesstudio
3 жыл бұрын
Yes, it’s very annoying if you forget to reset. Alison xx
@cherylbennett9585
3 жыл бұрын
Just practiced my first ever buttonhole. Thanks Alison
@loveandstitchesstudio
3 жыл бұрын
That’s great Cheryl, test on the same number of layers etc before doing on your actual garment. Alison xx
@janetlesleypowers9529
4 ай бұрын
Thanks for the tip about the pins! This is my first time doing buttonholes on m second-hand machine, although I've used it a lot. I notice on your first buttonhole, and on mine, the second side has narrower stitches! How can I avoid that?
@loveandstitchesstudio
2 ай бұрын
Thanks for you comment. It is the stitch length that is different not the stitch width. To correct difference of the stitch length of the left and right side of the buttonhole, you can play about with the stitch length until the sitches on both sides are balanced. On some machines there is a hidden dial to adjust the foward/backward stitch balance but the Janome 725s doesn't have this function. Hope this helps. Alison xx
@fionabooth6093
Ай бұрын
My machine saws one side but then won’t sew back down the other side! Any ideas, please? It just stops and sews a stitch in one place
@loveandstitchesstudio
29 күн бұрын
Is your buttonhole lever down correctly? Is it sitting between the 2 parts of the buttonhole foot that set the length? Is the fabric even? Is there anything blocking it (something like your fingers or a patch pocket)? Is the buttonhole foot level? Alison xx
@alexkiernan133
27 күн бұрын
Mine does something similar - the first side is perfect, bit the return is just straight stitch. I've never had this happen before and the machine has just been serviced. I've checked all the settings, dials and levers!
@loveandstitchesstudio
26 күн бұрын
@@alexkiernan133 did it also do this before it was serviced or just after the service? I would suggest this is a fault with the machine, rather than operator error. Alison xx
Пікірлер: 14