I watch watch and watch some more. Slowly but surely my brain is figuring out the techniques while imagining probabilities to create my own piece. Thank your sharing ! Cheers from down under.
@my-projects
Ай бұрын
Thank you very much for your great feedback.👍 Just get started - if you haven't tried it before, you'll definitely be surprised at what you can do yourself. Say hello to my older brother in Perth.😃
@KojiLocks
Ай бұрын
haha this great stuff lol the edits and effects are funny and keeps the vid more interesting . I usually find it hard to watch some wire work vids but these are so good like asmr with some humor haha. Love the work area and hippo haha
@my-projects
Ай бұрын
Thanks a lot, Koji - I have fun when I make my stuff and videos - I don't think it should be boring to watch when I have fun making it. Thanks again😄
@JustDux
7 ай бұрын
Looks like bracelets from Vilings series. Awesome!
@my-projects
7 ай бұрын
Thanks a lot..! 😊👍
@goodasnewrepairs
23 күн бұрын
Awesome work.
@my-projects
23 күн бұрын
@@goodasnewrepairs Thanks a lot 👍
@ambkbero2
3 ай бұрын
Two things, dip in liver of sulfur to bring some depth to the low spots, buff the high spots to a shine and second dip it in Kleer Coat to seal it. This will keep the shine and leave no stains on skin. Great design, I'm doing this one for sure!
@my-projects
3 ай бұрын
Thank you very much for your good advice - I will definitely use it!
@alvarobenjaminmeana2968
9 ай бұрын
Excelente trabajo...!
@my-projects
9 ай бұрын
Muchas gracias por tus amables palabras, amigo 😀👍
@leonardopachecobruno4843
2 жыл бұрын
Impresionante tu trabajo amigo felicidades👍👍👍
@my-projects
2 жыл бұрын
Muchas gracias 👍 Realmente aprecio tus comentarios 👍👍
@debbiedavis9871
Жыл бұрын
Love the end caps
@my-projects
Жыл бұрын
Thanks, Debbie ❤️👍
@LeandroAdeSa
6 ай бұрын
Lindíssima peça!!!
@my-projects
6 ай бұрын
Thank you 👍
@bev3717
2 жыл бұрын
Absolutely love this 💜
@my-projects
2 жыл бұрын
Thanks..! 😊👍
@ЕвгенийУстинов-ч6н
Жыл бұрын
Русский.язык
@user-lf7ye7pt8o
7 ай бұрын
what an artist beautiful
@my-projects
7 ай бұрын
Thank you 😊
@parvizzargari9183
Жыл бұрын
Very nice job.thank u for sharing
@my-projects
Жыл бұрын
Thanks for your feedback 😊👍
@jesuscolon1877
11 ай бұрын
AMAZIN WORK
@my-projects
11 ай бұрын
Thanks a lot 😉👍
@williamalexander9755
4 ай бұрын
Great work
@my-projects
4 ай бұрын
Thanks..! 👍😊
@sandrosilva6724
Жыл бұрын
Um lindo trabalho
@my-projects
Жыл бұрын
Muito obrigado
@tdarons
Жыл бұрын
Love the happy hippo for quenching. Cute!
@my-projects
Жыл бұрын
Thanks 👍
@fabiogomes8896
Жыл бұрын
Caraca muito TOP !!! Aqui no Brasil pra fazer uma dessa vão cobrar uma fortuna!!! Mais parabéns pelo seu trabalho.
@my-projects
Жыл бұрын
Muito obrigado, Fabio 👌- sim, também aqui na Dinamarca - é por isso que eu mesmo fiz 😊👍
@jack_k2136
Жыл бұрын
Amazing
@my-projects
Жыл бұрын
Thanks..! 😉👍
@garytaylor2595
5 ай бұрын
Great job I will definitely make this,When soldering end pieces do yours any solder or does the copper solder to itself
@my-projects
5 ай бұрын
Thanks😊👍 I use solder paste - flux with Micro metal in.
@kittyemzcanada
4 ай бұрын
👍💙💯..Absolutely beautiful results!! I just recently started working with the inner (14 gauge) copper from electrical wiring also..and my question is: is there a particular reason you torch the copper all over? Is there a coating on this wire I should be removing?
@my-projects
4 ай бұрын
Thank you very much for your great feedback - no, there is no coating that you have to remove, but when you work with the copper, e.g. if you bend it or knock on it, tensions will appear in the copper, which will make it harder and harder to work with. but if you heat it, it becomes soft again.
@kittyemzcanada
4 ай бұрын
@my-projects 👍..Thank you so much for taking the time to answer my question. I appreciate the advice, as I'm still new to working with copper. Thanks again 👍
@menisandradeoficial
2 ай бұрын
Excelente
@my-projects
2 ай бұрын
Thanks..!👍
@456casino6
6 ай бұрын
Straight skills
@my-projects
6 ай бұрын
Thank you very much 😊👍
@venganzamujer354
11 ай бұрын
love it
@my-projects
11 ай бұрын
Thanks..! 😊👍
@tishsmiddy71
Жыл бұрын
Beautiful ☺️ Thank you ❤️
@my-projects
Жыл бұрын
Thank you! 😊
@thanhhabacsydongy
9 ай бұрын
hay quá, cám ơn anh trai!
@my-projects
9 ай бұрын
Cảm ơn rất nhiều
@donaldsullivan6979
4 ай бұрын
Only pitfall to copper or even bronze is that it turns your skin green especially with any sweat. Copper looks so damn good though!
@my-projects
4 ай бұрын
Yes - you are absolutely right - and thank you for your feedback. I treat my finished copper jewelry with transparent, allergy-friendly lacquer for the purpose - then I avoid both the green discoloration on the skin and I don't have to polish the copper jewelry every now and then. I think it works well.
@donaldsullivan6979
3 ай бұрын
@@my-projects good idea, I have a bronze ring that turns my skin green so i think i will give that a try! Is there any specific product to get? Or just clear nail polish or something?
@my-projects
3 ай бұрын
@@donaldsullivan6979 I would not use nail polish because there are often different substances in it that can also cause allergic reactions. I sometimes use ProtectaClear - but there are many other different products. 👍
@perspicacity1396
Жыл бұрын
Very nice
@my-projects
Жыл бұрын
Thanks a lot 😊👍
@adiem1653
5 ай бұрын
What was the solder used? Was it just the white liquid as i saw no other material? Cheers
@my-projects
5 ай бұрын
I use solder paste - flux with micro metal in. 👍
@mikejohnston8872
8 ай бұрын
Great
@my-projects
8 ай бұрын
Thanks..! 😊👍
@trebolfilmsproductions6152
3 ай бұрын
Increible trabajo, felicidades. Por casualidad no se dedicaria a hacer alguno, me encantaria comprarle uno. Gracias
@my-projects
3 ай бұрын
Muchas gracias por tus elogios, pero lamentablemente no vendo pulseras.
@marlisantos1248
2 жыл бұрын
Parabéns amei ❤️
@my-projects
2 жыл бұрын
Muito obrigado pelo seu simpático comentário 😊❤️
@kirtandrews1859
3 ай бұрын
Omg it is absolutely gorgeous 😍 and so weighty I can tell looking at it. Quick question if I may. How do you clean of all your polishing pastes of your rotary disks?and quickly if I may. Do you not need solder to fuse copper to copper then? I thought you needed solder for any metal to solder to any metal. I am brand new and only trying to learn I'd really appreciate a reply. Thank you so much . And thank you for sharing. It truly is a work of Art
@my-projects
3 ай бұрын
Thank you very much for your very nice feedback 😊 Unfortunately, I haven't found an effective way to clean my polishing discs - right now I have to replace them when necessary. But please let me know if you find a good solution to this👍 Sometimes I use solder paste mixed with micro metal when I don't need very hard soldering - and then it's easier to clean the residue off - but other times I use traditional flux and solder. In the video I am working on right now, I have to use a very hard and durable solder on copper, so I use the traditional solution there. I hope you can use my answer - and thanks again for your feedback 🤩
@kirtandrews1859
3 ай бұрын
@my-projects Hello . A big help thank you for replying. I am needing to join two pieces of copper together only 0.8mm thick. And was wondering how-to. That or maybe some rivets could work I'm always thinking of something I can do. I'm just not sure if I need solder to join to pieces of same material together or if they wouod fuse om there own with a little flux paste only
@my-projects
3 ай бұрын
Hey - Depending on how strong the soldering needs to be, I would use the traditional solution for soldering copper as I mentioned earlier. It is quite difficult to get 2 pieces of copper alone to fuse together - it requires extra heat, completely clean surfaces and then the probability of the copper melting anywhere else than where you want it - will be quite high. Copper is very heat conductive as you probably know ;-)
@kirtandrews1859
3 ай бұрын
@my-projects OK yes I'm aware copper is a super conductor many a summer I've burned my neck from wearing a copper collar in the sun. Ouch. Ok can you please give me simple simple instructions on how to fuse copper to copper please. I'm quite dim at times and not sure I understand if you don't mind.
@kirtandrews1859
3 ай бұрын
@my-projects if I have understood correctly I need a solder paste hard. And then add some fine metal as well as flux. 1st step apple flux. 2 head up metal and flux. 3 add solder paste and metal bits heat until solidified.4 then apply ny second copper on top of whole thing and heat slowly both sides to completely solder ?
@andrewdavies4604
5 ай бұрын
Nice. Is there anything that can be put on it, to stop the copper tarnishing, but keep the copper colour? I turn copper green, and it makes a right mess
@my-projects
5 ай бұрын
Thanks a lot 👍 Yes - I use a pruduct like ProtectaClear to cover my Copper and brass jewelry - my experience is, that it is both a skin safe and anti-tarnish clear coating, that will protect your jewelry from oxidation and fading. You can off cause use some other laquer product that have the same effect. 😉👍
@andrewdavies4604
5 ай бұрын
@@my-projects Magic, thanks, I'll look into it.
@dannya6297
Жыл бұрын
Magnifique
@my-projects
Жыл бұрын
Thanks you 😉👍
@WilliamMoussa-x1b
17 күн бұрын
هل الموقد الصغير يحمي كثيرا لكنه لا يذوب النحاس ؟ هل علي أن استعمل الشالمون ؟
@my-projects
17 күн бұрын
إذا كان عليك صهر بعض النحاس بالكامل وتحويله إلى نحاس سائل يمكنك صبه في قالب، فيجب عليك أن تتجاوز 1000 درجة ويتطلب ذلك موقدًا ساخنًا جدًا (مع الأكسجين) أو فرن صهر.
@joesask857
Жыл бұрын
nice thanks man
@my-projects
Жыл бұрын
Cheers, Joe 👌😄
@ValkoBranislav
Жыл бұрын
Pekná práca...
@my-projects
Жыл бұрын
Vďaka 👍
@JesusReyesJaime-vm4ic
11 ай бұрын
Muy Bella
@my-projects
11 ай бұрын
Thank you 😊👍
@sandyrobinson7908
2 ай бұрын
I am curious about what kind of torch you use for your bracelet projects.
@my-projects
2 ай бұрын
@@sandyrobinson7908 I usually use a gas torch with oxygen and for this bracelet I used a gas torch similar to this one www.amazon.com/RX-WELD-Portable-Cylinder-Cylinders/dp/B0CHM3LRST/ref=mp_s_a_1_4?crid =2HGIBCSVYOEHP&dib=eyJ2IjoiMSJ9.qvBL6r5dxLbkvtvBHRrkLzB44RA-oXNDslghl6GR-SUytnhH7lKponhXEPvrdlZB9asFYw-VtPt5HP-SSivisKpEEDCQ3o7IDcBbi_QZmr2q7nfWjAUdHDoRaVIP-d7xlom22JUKvHFF21Z 2BZeQPSBjaYJ0aX4BtQvd3YICmls8prRmKzDyae7TPG8NmtnUi5lLpA3kfMd1HajCH2ufCw.P5H8nDnwxyDpErLOW9jOv091Nh3nl4zjCuMzizFSCyA&dib_tag=se&keywords=torch+burner+with+oxygen&qid=172104295 2&sprefix=torch+burner+with+oxygen%2Caps%2C176&sr=8-4 - but in my next video (1 week) I just use a simple gas torch without oxygen. 👍
@sandyrobinson7908
2 ай бұрын
Thank you!
@user-ib7nl
Ай бұрын
⭐️⭐️⭐️⭐️⭐️
@my-projects
Ай бұрын
Big thanks 😊👍
@mcebomabundza1094
11 күн бұрын
What are the benefits of copper bracelets?
@my-projects
10 күн бұрын
There are lots of advantages - it's easy to work with, it's available in lots of materials and can be reused for, for example, a bracelet - it's cheap and easy to get hold of, it's beautiful and it patinas nicely and ....
@AN63135
3 ай бұрын
This one is so close to the one I want to make… Do you know what size of wire you work with? Gauge #? Thank you! 🙏🏼
@my-projects
3 ай бұрын
Thanks 😊 Yes - I use gauge 12. 👍
@AN63135
3 ай бұрын
@@my-projects Thank you so much… I will give it a try… 🙏🏼
@boris4493
Жыл бұрын
Hallo, schönes Video und toller Armreif. Ich hätte da nur eine Frage: Für was wird das Kupfer immer erhitzt und dann in acid oder so, "eingelegt"? Gruß Boris
@my-projects
Жыл бұрын
Hallo Boris, Vielen Dank für Ihr Interesse. Ich erhitze das Kupfer, weil es hart wird, wenn ich damit arbeite - zum Beispiel wenn ich die Kupferdrähte flechte. Dann ist es schwer zu formen und wenn man es dann bis zur Glühtemperatur erhitzt, wird es wieder weich. Aber es sieht auch schwarz und „verbrannt“ aus - deshalb habe ich es in eine Säuremischung gelegt, um die Verfärbung zu entfernen.
@boris4493
Жыл бұрын
@@my-projects ah, danke für die Info.
@tueurdelombre7395
Ай бұрын
I really want to do this, but copper objects always turn green on me, is there anything I can apply to copper to prevent this?
@my-projects
Ай бұрын
Yes - I use metal polish - you can get something that is meant for jewelry - it works for me. I also use it in my latest video: kzitem.info/news/bejne/1ISq1JN7ZpV-dGk
@tueurdelombre7395
Ай бұрын
@@my-projects Thank you for your answer. I'll have to try that and hope it works.
@myrnaroman9611
2 жыл бұрын
Que belleza! ❤️
@my-projects
2 жыл бұрын
Muito obrigado - 😊 estou muito honrado 😀 ❤️
@iron4ig
Ай бұрын
что за флюс такой? как получилось спаять концы без припоя?
@my-projects
Ай бұрын
Я использовал флюсовую пасту, в которой также есть микрометаллические кусочки, поэтому концы были спаяны одновременно.
@louisvega4565
11 ай бұрын
nice
@my-projects
11 ай бұрын
Thanks..👍
@ahlegria_5371
4 ай бұрын
What gauge was the cable? Incredible work btw!!!
@my-projects
4 ай бұрын
THANKS..! I use gauge 12 ;-)
@ahlegria_5371
4 ай бұрын
Thanks! One more questions. Why do you keep heating it up?
@my-projects
4 ай бұрын
I heat the copper wire occasionally because when I work on the copper wire - either by tapping or bending the copper wire, it gets harder and harder to work with - but after it is heated again, it softens a bit.
@AN63135
2 ай бұрын
Another question… What the paste you use to fuse the ends? 🙏🏼
@my-projects
2 ай бұрын
Thanks😊👍 I use solder paste - flux with Micro metal in.
@WilliamMoussa-x1b
17 күн бұрын
صديقي اني احاول أن الحم بالنحاس أنه يصبح احمر لكنه لا يذوب ويصبح ساءل ما العمل ؟ وشكرا جزيلا
@my-projects
17 күн бұрын
أعتقد أن السبب هو محاولتك صهر النحاس عند دمج عنصرين معًا - فلن يكون الأمر جيدًا. ستحتاج إلى استخدام بعض اللحام النحاسي لدمج العنصرين معًا. يتمتع لحام النحاس بدرجة حرارة انصهار أقل وبالتالي يندمج مع كلا العنصرين النحاسيين اللذين تحتاج إلى دمجهما معًا. لن ترى الانصهار بعد الصنفرة.
@petersmedley459
2 жыл бұрын
What did you use to solder the ends on, or did you fuse them?
@my-projects
2 жыл бұрын
Thanks for your time 👍 I use Flux paste - which melts when heated and connects the ends to the bracelet 😊
@renzo623
Жыл бұрын
Thank you for asking this question! I was going to ask but you already did.
@renzo623
Жыл бұрын
@@my-projects Thank you for this tutorial! I have been watching it over and over again. I am going to give it a go within the next month! 😊
@Mrjanbryde
2 жыл бұрын
Love it! Do you surface treat the bracelet to avoid tarnishing and green stains on skin? I didnt reailze you could fuse without solder...i Wonder if thats a temperature issue 🤔
@my-projects
2 жыл бұрын
Thanks..! 😊👍 Yes - I surface treat with Zaponlak. It is slow drying, let it dry for 4-6 hours before using the bracelet cuff. No, I can't fuse without solder either - I use solder paste. 👍
@Mrjanbryde
2 жыл бұрын
@@my-projects ahhh!! Very cool. Thanks for the tips. Do you use silver solder paste on copper?
@my-projects
2 жыл бұрын
I sometimes use silver solder paste when I solder on the inside (it is cheaper 👍), but for visible solders on copper I use copper solder paste 😊
@ruthannlangley3258
Жыл бұрын
Did you use solder or just melt the nameplate to the cuff
@my-projects
Жыл бұрын
I used solder to fasten the nameplate..👍😊
@marianionutbelecciu4408
4 ай бұрын
Alright great job. But are you selling bracelets?
@my-projects
4 ай бұрын
Thanks a lot 👍- no unfortunatly not.
@Gunni369
Жыл бұрын
What did you paint on the copper to solder the plate on? Great results btw I hope I get to this level one day
@my-projects
Жыл бұрын
Thanks a lot 👍 I use solder paste - which melts when heated and connects the plate to the bracelet 😊
@antulaina2994
7 ай бұрын
@@my-projects oi mate, amazing work! I haven't heard of this solder paste, it's like glue? do you know any cheaper alternatives lad?
@mokhtarahmed5227
Жыл бұрын
Formidable
@my-projects
Жыл бұрын
Thanks a lot mokhtar👍
@leeferris5940
Жыл бұрын
What type of solder are you using, hard, medium, easy, extra easy?
@my-projects
Жыл бұрын
Hi Lee, I use my own mix of flux paste and solder material (small element copper solder) There are several Fluss pastes that can be used (eg Brazetec, LA -CO, Harris etc.)
@g0bb13
12 күн бұрын
small wrist gang wya
@my-projects
12 күн бұрын
Jep 👍
@الشيخالأكبر-ه7ط
Ай бұрын
عمل جيد و جميل، حقيقة أرغب بشدة في وضعه على معصمي
@my-projects
Ай бұрын
شكرًا جزيلاً لك - لقد كانت تلك تعليقات رائعة حقًا
@الشيخالأكبر-ه7ط
Ай бұрын
@@my-projects هل هناك طريقة ما كي اشتريه منك صديقي
@my-projects
Ай бұрын
لسوء الحظ، لا يمكن فعل ذلك - لقد صنعته من أجل صديق.
@الشيخالأكبر-ه7ط
Ай бұрын
@@my-projects ليس مقدرا لنا، اشكرك على تفاعلك و اتمنى لك كل النجاح
@my-projects
Ай бұрын
شكرًا جزيلاً لك - أنا ممتن جدًا لاهتمامك الحقيقي وتعليقاتك الرائعة
@edybbaldwin7494
6 ай бұрын
I WANT TO PURCHASE THAT HIPPO WHERE CAN I GET ONE
@my-projects
6 ай бұрын
I really dont know - I got it as a present 😊😀
@SontailsDesenha910
4 ай бұрын
❤
@矢口公子-y4f
6 ай бұрын
素敵💓
@my-projects
6 ай бұрын
Thanks 🥰👍
@djsamseedri
Ай бұрын
braiding copper does not make it celtic. but I do love the project and going to try myself. caveat I am going to hammer it flat !
@my-projects
Ай бұрын
Thanks - yes, you're right. And it sounds like a good idea to hammer it flat - I just think it will be difficult to make it both flat, even and harmonious. 👍
@elainelily9910
Жыл бұрын
Use a cljpboard for a vise. Then you have something solid to weave against
@my-projects
Жыл бұрын
That sounds like a good solution - I appreciate that 👍😉
@roccoluca1832
11 ай бұрын
❤
@tishsmiddy71
Жыл бұрын
Will you make a mold of your hippo and may I buy it ?
@my-projects
Жыл бұрын
The hippo is a previous gift from a friend - maybe it will be one of my future projects and then I'll get back to you. Thank you very much for your interest :)
@ruthannlangley3258
Жыл бұрын
Just one more question what size is your metal stamps
@my-projects
Жыл бұрын
Thanks for your question 👍 the size of the metal stamps is 3 mm.😉
@lecobra418
3 ай бұрын
I will most definitely try to make one, I love upcycling stuff! Thanks for the video, I enjoyed it!
@my-projects
3 ай бұрын
Thank you very much for your great feedback!
@cris-ci8fs
2 жыл бұрын
Bonjour merci pour votre partage de savoir. Une question à la 3eme minutes vous utilisez une Cole blanche , pourriez vous communiquer le nom du produit en question ? Merci par avance
@my-projects
2 жыл бұрын
Bonjour - Merci pour votre commentaire. J'utilise mon propre mélange de pâte de flux et de matériau de soudure (soit de la soudure à l'argent, soit de la soudure au cuivre en petits éléments) Il existe plusieurs pâtes Fluss qui peuvent être utilisées (par exemple Brazetec, LA-CO, Harris, etc.)
@cris-ci8fs
2 жыл бұрын
@@my-projects merci beaucoup pour avoir pris le temps de m répondre
@my-projects
2 жыл бұрын
@@cris-ci8fs Vous êtes toujours la bienvenue 👍
@leeferris5940
Жыл бұрын
What is this cable called and what gauge is the copper wire being used?
@my-projects
Жыл бұрын
The wire is 5x2,5mm - outdoor electrical installation cable👍
@cristinaarruda3267
2 жыл бұрын
Perfeita💜💜💜💜💜💜💜quanto é a pulseira?
@my-projects
2 жыл бұрын
Muito obrigado. Infelizmente, a pulseira nao esta a venda - fiz para o meu cunhado. 😉👍
@soniasolis3809
Жыл бұрын
Hola, me puedes dar las proporciones de ácido y de agua. Por favor
@my-projects
Жыл бұрын
Sí, por supuesto, es ácido sulfúrico al 14%, muchas gracias por su interés.😊❤️
@samoasisifi
2 ай бұрын
Stop complainig and create your own channel if you think you can do better? It's such an underminning of MP's hard work.😮😮😅
@my-projects
2 ай бұрын
Thank you so much for your support - I really appreciate it 😊👍
@bambubambu1234
Жыл бұрын
Alguém poderia informar como é feito essa solda na pulseira de arame de cobre... OBRIGADO!!!!
@my-projects
Жыл бұрын
Sim - Obrigado pelo seu tempo 👍 Eu uso pasta Flux - que derrete quando aquecida e conecta as pontas à pulseira 😊
@bambubambu1234
Жыл бұрын
@@my-projects OBRIGADO!!!!! Isso vai me ajudar muito...
@my-projects
Жыл бұрын
@@bambubambu1234 De nada..😀
@misterkadence
Жыл бұрын
What type of gloves do you use?
@my-projects
Жыл бұрын
Hey misterkadebce - I use Nitrile powder free gloves 👍
@mokhtarahmed5227
Жыл бұрын
Bonjour,s'il vous plaît j'ai une question sur le produit blanc?
@my-projects
Жыл бұрын
Hi moktar - J'utilise mon propre mélange de pâte de flux et de matériau de soudure (soudure au cuivre à petit élément) Il existe plusieurs pâtes Fluss qui peuvent être utilisées (par exemple Brazetec, LA -CO, Harris, etc.) 👍
@mokhtarahmed5227
Жыл бұрын
merci beaucoup pour l'information,je vous souhaite un bon courage
@izDifferent
2 ай бұрын
Do you do commissions?
@my-projects
2 ай бұрын
No unfortunatly not. ☺👍
@JacksomReynam
Жыл бұрын
O que isso que ele usa pra colar?
@my-projects
Жыл бұрын
Você quer dizer o que eu uso para soldar as pontas?
@DRAKVLL
Жыл бұрын
What´s the caliber for that wire?
@my-projects
Жыл бұрын
The wire is 5x2,5mm 👍
@tishsmiddy71
Жыл бұрын
O my was that torch on !?
@my-projects
Жыл бұрын
Yes 😉👍
@carolinabarbershop
Жыл бұрын
Where to purchase?
@my-projects
Жыл бұрын
It’s unfortunatly not for sale 😊👍
@lindaosburn6376
2 жыл бұрын
Do you have a brand for the Flux paste?
@my-projects
2 жыл бұрын
Yes - I use BrazeTec paste 😉👍
@احمداحمد-و1ج6ح
Жыл бұрын
👍👍👍👑👑
@my-projects
Жыл бұрын
Thanks...!! 👍
@АшотАмбарцумян-х8б
Жыл бұрын
А СК, СТОИТ БРОСЛЕТ, МОЖНО ЗАКАЗАТ?
@my-projects
Жыл бұрын
Большое спасибо - к сожалению нет 😊👍
@twylakarl3023
Жыл бұрын
Can you tell me what the white paste stuff you use on the end is?
@my-projects
Жыл бұрын
Yes, I use solder paste - a combination of a powder made up of metal solder particles and sticky flux that has the consistency of putty. The flux not only does its usual job of cleaning the soldering surfaces of impurities and oxidation, but it also provides a temporary adhesive that holds the surface mount components in place. And its easy to use 😉👍
@joonaskekoni2867
Жыл бұрын
BTW. Soldering is not needed, you can just wrap the ends with same wire.
@my-projects
Жыл бұрын
Thanks Joonas - yes I tried that first but It did not work 😉👍
@marshallkohlhaas80
2 ай бұрын
OMG you have a small cut on your glove??@@!!!!!!!
@my-projects
2 ай бұрын
@@marshallkohlhaas80 Yes - sometimes it also seems TOO small.😆👍
@marshallkohlhaas80
2 ай бұрын
@@my-projects thx!
@alankochevar6064
Жыл бұрын
More detail needed, wire gauge used, looks like acid solution and another was used
@my-projects
Жыл бұрын
Thank you very much for your feedback - I use light sulfuric acid and 1.65mm wire.👍😉
@ismaeljulianmartinez
2 жыл бұрын
In slow motion. 😆😆😆
@my-projects
2 жыл бұрын
Ha, ha - yes you're right 😆👍
@user-cj8tl2qs3l
Жыл бұрын
Lol. The celtic tribe are famed for their reuse of 3core cabling😂
@my-projects
Жыл бұрын
Yeahh - 🤪
@jewellerydesignerartists9353
Жыл бұрын
Great work process 👍 Jewellery designs 👌 I am support your Chanel subscribe ❤️ have a great day
@my-projects
Жыл бұрын
Thank you so much 😊 - Stay connected 👍
@tribulationcoming
5 ай бұрын
Will definitely give it a try. thanks very much. Twelve strands and people prefer the look. The axe handle works well, got to get one.
@my-projects
5 ай бұрын
Thanks a lot 😊 👍
@tribulationcoming
5 ай бұрын
@@my-projects This is the best looking and very easy to do. Did one this morning, soldered ends and ground smooth. Thanks again.
@my-projects
5 ай бұрын
@@tribulationcoming I'm really happy that you made one yourself - thanks again for your interest and feedback 👍
Пікірлер: 221