Nice clear vid. Been spinning chain here for fifty years, and a couple points if I might add... After aligning both sides of the master link together, I like to only slightly mushroom over the first rivet to hold the side plate in place without using much pressure, then go on to the second rivet and make a completed mashed head, then go back and complete the first rivet. It can get weird if you complete the first rivet and the side plate has popped off the one you haven't done yet. I think I have seen A to Z on everything that can go wrong spinning chain. Unless things have changed since I purchased my spinner way back when, smaller chains like .250 or 3/8 lo-pro spin best with an anvil designed for the smaller rivets. I think most spinners have the different anvils interchangeable. The larger anvil works ok on the smaller studs, but being for bigger diameter rivets it can easily scar up the side plate if you mushroom the head so much (no biggie). It's not hard to spin a rivet so much that the link locks up. It will loosen up in the saw running if you want to go that route, but if you take a minus screwdriver snd stick it in between the plates of the master link and give it a whack, it can spread the thing a tiny bit and free up the too tight link.
@LumberjackSmokestack
2 жыл бұрын
Great video Jay! So nice and shiny new. It’s good to see other folks doing it you can pick up new things. For instance I love the paint brush idea. Less mess that what I usually do. I’m gonna try it out for sure.
@jaythe306snowmexican
2 жыл бұрын
Thank you buddy, I hope it will help out someone. I know I'm no expert at anything it's just how I do it.
@JoeRainis156
2 жыл бұрын
Now that was a great tutorial on chain making.
@jaythe306snowmexican
2 жыл бұрын
Thank you sir
@cajun3197
2 жыл бұрын
Great video Jay! I need to learn a little more about makin chains
@jaythe306snowmexican
2 жыл бұрын
It's pretty simple buddy. You could do it in your sleep 😎😊
@cajun3197
2 жыл бұрын
@@jaythe306snowmexican lol
@loggerjohn01
2 жыл бұрын
Hey Jay, Thanks for showing this, very interesting. I like that machine! Have a great day.
@jaythe306snowmexican
2 жыл бұрын
Thank you buddy, hope you are having a great day.
@simpleman4224
2 жыл бұрын
Great job buddy! That’s a fine outfit! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
@j.chrisbeck7492
2 жыл бұрын
Very interesting content, I don't think I've seen this anywhere else. Keep on rocking brother
@jaythe306snowmexican
2 жыл бұрын
Thank you sir.
@kevinmaxam2414
2 жыл бұрын
Great vid and well explained. Be safe and be careful.
@jaythe306snowmexican
2 жыл бұрын
Thank you sir, hope you are having a great day.
@andrewscott2866
2 жыл бұрын
Nice setup 👌. Watching your channel might get expensive for me! 😜
@jaythe306snowmexican
2 жыл бұрын
Thanks buddy, 🤣🤣 Janelle just gives me the look once in awhile about the garage additions 🤣🤣
@waynemortensen1498
2 жыл бұрын
Nice video buddy! Thank you. I have the NG 7. I'm about to set up and use it for the first time today any tips?
@jaythe306snowmexican
2 жыл бұрын
Just take your time, it's simple too do just patience and don't rush it.
@KainKustomGarage
2 жыл бұрын
That's Awesome! Full service Saw Shop now!😄
@jaythe306snowmexican
2 жыл бұрын
🤣🤣 only for the simple things buddy. I got not much for patience tearing saws apart 🤣🤣🤣
@KainKustomGarage
2 жыл бұрын
@@jaythe306snowmexican 🤣🤣
@marcibb3167
5 ай бұрын
Very good Video. Thanks a bunch
@jaythe306snowmexican
5 ай бұрын
No problem
@Aaron_A_Lynch
2 жыл бұрын
Nice vid brother...slicker than a snicker 🤙🏻🪓😎
@jaythe306snowmexican
2 жыл бұрын
Thank you buddy.
@ChippyOutdoors
2 жыл бұрын
Remind me of my reloading setup except for chainsaws 👊🤟
@jaythe306snowmexican
2 жыл бұрын
Pretty close too the same
@johnarnettsways.8758
2 жыл бұрын
Jay looking good my friend Awesome setup. Stay free and safe. 🇨🇦🇺🇸🇨🇦🇺🇸❤️🌲🌲🌲❤️
@jaythe306snowmexican
2 жыл бұрын
Thank you sir. Hope you are doing the same buddy 🇨🇦🇺🇲❤
@ClintsHobbiesDIY
2 жыл бұрын
Nice vid Jay. It's a little more to it than I knew. I've thought about getting set up to do it, but I just can't justify it, no more than I cut.
@jaythe306snowmexican
2 жыл бұрын
It's pretty simple buddy, it would be a good investment if you wanted to make a little sise money.
@ClintsHobbiesDIY
2 жыл бұрын
@@jaythe306snowmexican That's not for me Jay. I quit chasing money 6 years ago after 43 years in a paper mill. I spend my time do for me. I could make leather working a 7 day a week job, but I won't let it happen.
@Thetreefella
2 жыл бұрын
Jay,I wish I was there to watch brutha...🌳💚🌳💚👍👊
@jaythe306snowmexican
2 жыл бұрын
Well hurry up and get here brother 😁😎
@davidruiz4176
Жыл бұрын
Wow amazing was looking for a video like this this really helped me out a lot thanks
@jaythe306snowmexican
Жыл бұрын
No problem, glad it helped you out
@casterman2
2 жыл бұрын
Totally enjoyed this video!
@jaythe306snowmexican
2 жыл бұрын
Thank you sir
@subrotosenso4973
2 жыл бұрын
🖐️ hello guys Indonesia hadir like coment juga suppotnya 👍💪🙏🇲🇨🖐️
@jaythe306snowmexican
2 жыл бұрын
😎👋
@JKSawShop
2 жыл бұрын
Looks like that spinner does a great job, almost effortless.
@jaythe306snowmexican
2 жыл бұрын
It's really nice stuff actually. I'm pretty impressed and did a great job.
@merrittbebout7279
Жыл бұрын
Thanks for this video It was very informative and helpful to me. Where did you buy the equipment from stihl dealer?
@jaythe306snowmexican
Жыл бұрын
Thats awesome. Yes I bought this from the stihl dealer.
@MUFFLERDELETE101
2 жыл бұрын
That's a nice set up brother
@Starcommand33
2 жыл бұрын
Just wondering what you like better Stihl or Oregon spinner?
@jaythe306snowmexican
2 жыл бұрын
This is definitely higher quality.
@bt6034
9 ай бұрын
Good info, Part # NG 7 for the combo kit.
@norris.7670
27 күн бұрын
👍
@marcduclos9789
2 жыл бұрын
That is a quality connection. The bike lift is the ticket.
@jaythe306snowmexican
2 жыл бұрын
Thank you sir . Ya it makes a good work bench 🤣
@MOMMATAZ81
2 жыл бұрын
Nice job 👍🏼
@jaythe306snowmexican
2 жыл бұрын
😁 thanks momma
@ButlerOutdoorsCanada
2 жыл бұрын
Great video Brother!!
@jonbobskunkworks
2 жыл бұрын
Sweeettttt!!! Awesome video!
@jaythe306snowmexican
2 жыл бұрын
Thank you sir
@waynemortensen1498
2 жыл бұрын
So what kinda side cash are we talking? Just charge a little less than the hardware store or?
@jaythe306snowmexican
2 жыл бұрын
If I make any chain for a friend just the cost of chain and links
@stuartbedke2110
Жыл бұрын
How do you replace the rivet spinner?
@jaythe306snowmexican
Жыл бұрын
I'm not understanding your question
@AdelinaDominguez-ig7rd
11 ай бұрын
How much is it for all three of them
@jaythe306snowmexican
11 ай бұрын
The press and rivet spinner where over $500
@robbevington1754
7 ай бұрын
For some reason I want to buy something from JD indust supplied
@nheng6913
Жыл бұрын
Nice quality tools but typical Stihl. I can't buy one from dealers in my area without buying some chain and tooling "package". Stihl could boost sales by 1000% if they got smart and took back some of the copy cat business.
@TheDUTYFIRST
Жыл бұрын
Our local FD just got one of those breakers, they are useless. The aluminum perch is a terrible design. The chain doesn't sit in it properly.
@SeriousSchitt
Жыл бұрын
I couldn't help but notice that exact thing in Jay's video at 4:47, I said to myself 'my goodness, he's all on the piss'... and he was!
Пікірлер: 67