Core shots are tougher than you make it look Matt! Lol👍 nice video!
@MattLunaFishing
Жыл бұрын
Thanks! I burned the plastisol on these ones but the process is still the same!
@dagarhart
4 жыл бұрын
Good video Matt!
@MattLunaFishing
4 жыл бұрын
Thank you!
@AmbassadorsoftheHunt
4 жыл бұрын
All due respect, I think you needed to add some heat stabilizer to your plastisol, if you used the Essential Series plastic. It looked like you might have burnt it a bit. Try using Dead On, I have not burnt any plastic since changing over. I love your videos, keep up the great informative & instructional videos! A loyal subscriber. I just also subscribed under my KZitem channel. But under my name, I've been following for a good while.
@MattLunaFishing
4 жыл бұрын
Thanks for the support. Yes i totally burnt the plastic. I’ve found that when i try and hurry the heating process i burn the plastisol. When i slow down i don’t.
@UncleKrusty68
3 жыл бұрын
@@MattLunaFishing Dead on Plastics Plastisol is way better in my opinion.
@Tracks777
4 жыл бұрын
awesome content
@MattLunaFishing
4 жыл бұрын
Thanks! Glad you liked it! Thanks for watching!
@davidjohnson8501
3 жыл бұрын
Thanks Bro, good idea and I will be using it. If you don't mind. Did you get an answer on how to keep your colors from being dull. Was it a lubricant needed or is it the Mold itself? Good content
@MattLunaFishing
3 жыл бұрын
The yellow color was from me burning the plastisol a little and the dullness was most likely from the mold. The DoIt essential series molds are cast aluminum and not CNC which is why it’s a little dull. I also did this with ned worms too: kzitem.info/news/bejne/1G9snohqqKeCqmU
@davidjohnson8501
3 жыл бұрын
@@MattLunaFishing gotcha, thanks
@MattLunaFishing
3 жыл бұрын
Anytime
@tracynewman5246
3 жыл бұрын
It’s the mold CNC molds won’t dull your colors but are are more expensive
@EDOutdoors91
4 жыл бұрын
pretty cool bro. i have this mold in transit to me and as soon as i get them im gonna try this. thanks for the video. check out my work when i get more bait making videos up!
@MattLunaFishing
4 жыл бұрын
Awesome man! Have fun with it. The color schemes are endless!
@MrOmoose
4 жыл бұрын
👍🏼
@MattLunaFishing
4 жыл бұрын
Thank you! Thanks for watching!
@FRANKRICECOLD209
4 жыл бұрын
Yes That Do-It Essential Series Plastisol Is Crap It Is OK For Dark Colored Baits But If You Are Doing White And Clear Bait If You Heat It Up To Much Or Over and Over It Yellows So i Only Use It For Dark Colors Dead On Plastix Is The Best For White and Clear
@michael.demello12
4 жыл бұрын
If you used dead on plastic I know it would work but I don’t know why they yelled
@MattLunaFishing
4 жыл бұрын
Thanks. I think it’s just from over heating the plastic.
@damnitman1969
2 жыл бұрын
Waste of time and money
@AddictedAngler
4 жыл бұрын
switch to dead on plastic it much friendly
@MattLunaFishing
4 жыл бұрын
Thanks I’ve heard good things
@tracynewman5246
3 жыл бұрын
Dead on plastic the best on the market
@thisislargemouth5566
4 ай бұрын
Plastic for too hot too quickly. I've it starts to gel z only do like 15-20 seconds at a time until it slowly reaches 350. Then shoot. It should keep the plastic a bit more clear. Pthalate free plastisol tends to be a bit more temperature stable in my opinion as well.
@shawn_r_schultzfishing4883
4 жыл бұрын
Like you said the color combinations are almost endless, very cool!
@MattLunaFishing
4 жыл бұрын
They totally are. Between hi-lights glitter colorant etc, you imagination is the only limit!
@taymot2131
2 жыл бұрын
Beautiful colors! 👌
@MattLunaFishing
2 жыл бұрын
Thanks
@basssindylan
Жыл бұрын
Yeah that was pretty cool I wonder if they make them core shots like t-shaped where it would come out and make shad black dot On each side of the bait
@MattLunaFishing
Жыл бұрын
No idea how you’d accomplish that. It would be pretty tough to accomplish that. You could just add that after.
@basssindylan
Жыл бұрын
I don't know it straight and a t Rod there's not much difference there's not much different difference yeah admit afterwards I guess that would be the easy way out
@MattLunaFishing
Жыл бұрын
The problem is how it would be designed in the mold for all that stuff to come together. I’m sure it’s possible but would take a lot of engineering
@grindstonelures694
4 жыл бұрын
bet these will still catch....i liked that even thou it got scorched you still ran with it! keep up the great work
@MattLunaFishing
4 жыл бұрын
Thanks! Appreciate you watching and commenting!
@AmbassadorsoftheHunt
4 жыл бұрын
I will agree, I know you can still catch fish with them, Never A Bad Pour! Always a NEW COLOR!
@tomboybaits4905
3 жыл бұрын
Yea the fish won’t care lol
@rloera601
3 жыл бұрын
You need heat stabilizer to slow down the heating. And you over it. Get heat gun
@FRANKRICECOLD209
4 жыл бұрын
Yes That Do-It Essential Series Plastisol Is Crap It Is OK For Dark Colored Baits But If You Are Doing White And Clear Bait If You Heat It Up To Much Or Over and Over It Yellows So i Only Use It For Dark Colors Dead On Plastix Is The Best For White and Clear
@MattLunaFishing
4 жыл бұрын
Thanks man. I messed it up for sure. Reheating too many times and not paying attention to my temps!
@FRANKRICECOLD209
4 жыл бұрын
@@MattLunaFishing Dead On Plastix if You Reheat 20 30 Seconds at a Time i Reheat Pure Whit Over and Over No Yellowing
@MattLunaFishing
4 жыл бұрын
Good to know! Thanks
@lelandhenryfishing4870
4 жыл бұрын
Some plastic just yellows as you heat it up and the more times you heat it up. Like your idea with the core shot. Question is the tail section thick enough to have a longer rod go all the way through?
@MattLunaFishing
4 жыл бұрын
Yeah I’ve played around a little with the plastic and you’re right, but this was some user error though for sure. This mold doesn’t have a thick enough tail for the rod to go all the way through.
@Garcia_Familia_Adventures
4 жыл бұрын
There’s another YTer that does the core shots, Worlds Worst Fishing, he oils the rods. I’m not sure if that’d help you. 🙂🤙🏼
@MattLunaFishing
4 жыл бұрын
I did oil the rods. Just didn’t show that part. I’ve watched his videos. He has a great channel! Thanks for watching! Appreciate it!
@MattLunaFishing
4 жыл бұрын
I did oil the rods. Just didn’t show that part. I’ve watched his videos. He has a great channel! Thanks for watching! Appreciate it!
@Flymantex
3 жыл бұрын
where did you get the rods?
@MattLunaFishing
3 жыл бұрын
Home Depot!
@Flymantex
3 жыл бұрын
@@MattLunaFishing - THANKS!!!!!!! - I went a head and watched your other video on the CoreShot - great job; great video
@MattLunaFishing
3 жыл бұрын
Thanks for watching!
@garybowers9605
4 жыл бұрын
Very nice video!
@MattLunaFishing
4 жыл бұрын
Thank you! Glad you liked it! Thanks for watching!
@acezn8s1
4 жыл бұрын
What size rods are those
@MattLunaFishing
4 жыл бұрын
These are 3”
@tomboybaits4905
3 жыл бұрын
@@MattLunaFishing how big around are they?
@MattLunaFishing
3 жыл бұрын
Similar to a kietech swing impact fat
@MattLunaFishing
3 жыл бұрын
Maybe just slightly larger
@jeremymericle5835
4 жыл бұрын
Spray your molds with 500 degree engine enamel and it will make the bait shinny. I saw it on that guy skimpy
@MattLunaFishing
4 жыл бұрын
I’ve tried to do that and it didn’t work for me!
@AmbassadorsoftheHunt
4 жыл бұрын
@@MattLunaFishing I tried it, the secret is light coating (2 separate coatings). Wait at least 24 hour before you use them once done.
Пікірлер: 63