Really good job on this. Can you make 3 more so I can use them on one of my karts?
@VicenteGarzaIII
3 жыл бұрын
Hello super gt viewer here
@sic.4191
3 жыл бұрын
@@VicenteGarzaIII Hello Super GT, viewer here
@DAZUNIVERSALINDUSTREIS
3 жыл бұрын
Hey love your vids lol
@dandavies03
3 жыл бұрын
Hello super gt viewer here
@thedawg7394
3 жыл бұрын
Hello, Zuko here
@TommoOnYoutube
3 жыл бұрын
IT'S HERE!
@HarilloF1
3 жыл бұрын
Tommo!
@VicenteGarzaIII
3 жыл бұрын
I found this video because of you and it was awesome
@keelkiller1236
3 жыл бұрын
HELLLO TOMMO
@almorgan68
3 жыл бұрын
The tyre is also awarded for the fastest lap aswell
@Azeria
3 жыл бұрын
Using a Kart tyre for this was such a great idea!
@mikesuarez9615
3 жыл бұрын
Fr
@suryaanshrajith3348
3 жыл бұрын
We meet again @Azeria
@DAZUNIVERSALINDUSTREIS
3 жыл бұрын
Everywhere I go I see you
@rayhib
3 жыл бұрын
hello azeria
@Aldas001
3 жыл бұрын
The most long awaited and most anticipated piece of F1 content known to man is finally here!
@jackdeygmedia.3096
Жыл бұрын
First comment
@dsdy1205
3 жыл бұрын
Lewis: "Shit man all you had to do was ask"
@Gprince2121
3 жыл бұрын
Love love love this! However £93 for that 3D print is day light robbery! If you ever need 3D prints in the future, I’ll happily help out as a thank you for making great content!
@jensaugust743
3 жыл бұрын
Was about to say the same thing! You can get a quite decent printer for like 3x that. And the plastic used is like 3£ at most. Also rather confused as to why he would get it in ABS? PLA seems a lot more appropriate for the job, considering it isn't structural.
@michaeldahlinger8815
3 жыл бұрын
@@jensaugust743 ABS is more rigid and less prone to warping.
@heavyweight6440
3 жыл бұрын
@@michaeldahlinger8815 If you set up your heatbead properly and have the proper distance of the nozzle to the heatbed you wont get any warping on PLA. I have never had ANY warping on my Ender 3 with PLA.
@michaeldahlinger8815
3 жыл бұрын
@@heavyweight6440 I don't mean just with printing, in general PLA can melt and warp after being left outside in the heat and whatnot. I personally print with just PLA and PETG and have never printed with ABS as I don't have an enclosure and just wouldn't want to have to deal with the smell. That being said thanks for the response, I dont really have an warping issues either when printing as I use a BL touch for leveling and as long as I keep my glass build plate either clean or with an adhesive, it does its job. That's just my knowledge on ABS from what I've gathered from being in the 3D printing community for a few years.
@slipknotfan2217
2 жыл бұрын
pay 20 pounds more and you got yourself an ender 3, plus another 20 for filament
@RaianF1
3 жыл бұрын
This is just too cool! I would've sanded down the Dunlop markings off the tyre but otherwise it's immaculate
@JustThingKing
3 жыл бұрын
Great video! Here are a just a few notes that could've made the result slightly better; * You could get the red more vibrant is by using a white or red primer (primer greatly affects the color of the top coat). * Vinyl is also quite hard to get clean, I would try water transfer decals (you can get sheets that you can print your own designs on, any unprinted area just becomes transparent). If it comes out bad it's easy to remove (just water and some scrubbing) * Normal primer works fine for 3D prints, but filler primer is better. It fills in the gaps way more and is great of 3D prints. You could also use something like Milliput to hide the banding.
@eddy8956
Жыл бұрын
I think if u use Waterslide decals on non smooth surface it will look very bad, it might be better to stay with vinyl i guess. but i agree with you, on smooth surface it would be better
@ethanbrigden8674
3 жыл бұрын
Cool project! A note for the future, the banding on the 3D print is because of the .stl file export quality, adjusting the options and exporting at a higher quality will make it super smooth. Hope this helps on future projects, keep up the good work.
@mattamys
3 жыл бұрын
Thanks!!
@ethanbrigden8674
3 жыл бұрын
@@mattamys No problem 👍🏽
@Kauppamopo
2 жыл бұрын
7:08 that's why should always remove the masking tape right after you are finished spraying, when its still wet. that way it doesn't dry to the tape and leave uneven edges when removed.
@SlimeKingSKG19
3 жыл бұрын
Why don’t you just ask Lewis Hamilton to give you one of his trophy😂 cause he had a lot of them
@footycardstuff1232
3 жыл бұрын
He doesn’t own them. his car owns 80% of each.
@EpicFatLip
Жыл бұрын
To get the red more vibrant, I would have used a light grey or white primer. But before that, I'd have tried to cut those rubber prints off the sidewalls with some sort of planer...
@hydrolisk1792
9 ай бұрын
OMG A mini Pirelli tyre!! SO CUTE!!!!!
@HarilloF1
3 жыл бұрын
F1 fan and model maker. In a bit I'll have my own wheel too
@crrbn5514
3 жыл бұрын
This is really nice. you can actually get this lot cheaper, if you get the go cart tire from a local go carting track for free and if you have a 3d printer you can print the rim by yourself.
@Trex3n20
3 жыл бұрын
Who needs to get pole when you can just get this? Incredible job Matt!
@janionmakes11
3 жыл бұрын
Nice job! Smart thinking with the expanding foam to keep the tyre shape. That 3D print is expensive though, I hadn't realised how much it costs to get single parts made
@mattamys
3 жыл бұрын
Thanks! Yeah it’s pricy but it’s also thick, largish and using a decent plastic filament :)
@schwuzi
3 жыл бұрын
@@mattamys Get a 3D printer. I recommend the Ender 3.
@sv5905
2 жыл бұрын
I use a mark forged and form labs printer the form labs one has lots of material resins and goes to about 100 microms so it is very smooth
@johnhunter4465
3 жыл бұрын
the centre cap off the original wheel is from the Vw golf gti Pirelli edition, if you wanted to add that touch, you can still buy them from the dealer.
@RacingStatistics
3 жыл бұрын
This is crazy amazing!!!
@HJCars
3 жыл бұрын
this is such a good idea wow. I might get a wheel printed out at my university! good thing I have some experience with modelling already because that means I might actually be able to replicate it :)
@lewismatthews1442
3 жыл бұрын
For the painting, use a white spray paint to create a base, that will make the red far brighter. Other than that, this is freaking amazing!
@amethystgirl25racing
Жыл бұрын
That's some beautiful art mate.
@paodepota8373
3 жыл бұрын
That looks good Matt!
@sentiel
3 жыл бұрын
Wicked video Matt! Got me excited at the start that you were coming out with some merch!
@harpaliam87
3 жыл бұрын
amazing work !!! i’d would buy that from you
@kieranhendy
3 жыл бұрын
You could even try melt and scrape some of the original text off the tire to make it look cleaner :)
@17ForLuck
3 жыл бұрын
bit hard and dangerous to burn it, probaly should just scratch and then sandpaper
@jakobbingenlarsen2553
2 жыл бұрын
This looks so cool. I made one myself using this tutorial. Turned out super great 😁 Thanks
@mattamys
2 жыл бұрын
Would love to see the final result, show me on Twitter!
@jakobbingenlarsen2553
2 жыл бұрын
@@mattamys Tagged you in my post on twitter :)
@danieljarvis7176
3 жыл бұрын
Yes
@epicmemechannel
3 жыл бұрын
This so cool!!
@tombutton5031
3 жыл бұрын
Fair play, the amount of effort that went into this. Nice job.
@michaelfortier7726
3 жыл бұрын
Suggestion for a remake of this : make a 2 part rim so that it actually goes over the tire bead and is glued together in the center. It's ok for somebody with no fabrication skills, but a few key improvements would make this much better :).
@jezMki
3 жыл бұрын
if you wanted a more vivid red color, after the primer, use white spray paint then the red
@ThijsF28
2 жыл бұрын
I just made 1 with a used front gokart tyre😁 the rim is still inside which i painted black to replicate the 2022 tyres I used the stencil you provided which worked like a charm And i used a few parts from the gokart's suspension to have the lock nut on the wheel aswell and it also function's as a stand 😁
@mattamys
2 жыл бұрын
Amazing! Would love to see what it looks like, tweet it to me!
@ThijsF28
2 жыл бұрын
@@mattamys i will do that :)
@schwuzi
2 жыл бұрын
I also made one with a tyre 7.1 inches wide. I also found the original 3D model you modified and printed the wheel nut separately.
@charlesmorales5737
2 жыл бұрын
THANK YOU SO MUCH! You are a real one!
@joecraddock6542
3 жыл бұрын
If matt doesn’t change his channel name to deez nuts to respect mr Steve Alvarez Brown, I will be very disappointed
@myk1137
3 жыл бұрын
Oh,Steve is here too.Just noticed.
@PBMS123
3 ай бұрын
4:55 FYI you want to use filler primer to do this, and not just regular paint primer. Filler primer will fill gaps with the putty, and not paint.
@dinterdos
3 жыл бұрын
Man, this looks amazing Great work!
@nsx_montana
3 жыл бұрын
We definitely need more of this. Awesome job and great camera shots too ofc🔥
@lewis.n2313
3 жыл бұрын
Wait bro you the guy in FRL...
@nsx_montana
3 жыл бұрын
@@lewis.n2313 not anymore luckily why?
@rayhib
3 жыл бұрын
Surprising that I've never heard of you before. You just got a new subscriber! This was such a good idea.
@CameronF1TV
2 жыл бұрын
Incredible
@bakedbeings
Жыл бұрын
The 3d print I'm guessing was faceted because the lower poly mesh (with control loops or creases) was printed rather than the smoothed mesh. You can create the smoothed mesh in most any modelling package with a click (blender/Maya/ZBrush) and then export a much smoother STL for printing. The banding on 3d printers is measured in fractions of a millimetre!
@jonmaddox9087
3 жыл бұрын
why is no one talking about how third dude looks like george russel
@francoisg3500
3 жыл бұрын
Nice video! Keep up the great content! I read you post on Instagram about it taking 3 weeks to make this video. Awesome stuff. 😎
@manicchimp4793
2 жыл бұрын
Woah!!! Love it!!! Totally want one!!! 😍
@mannys2893
3 жыл бұрын
YASS. I love it!
@inspyre.design
2 жыл бұрын
Bloody brilliant!
@johanneskhangho
3 жыл бұрын
This looks sick!
@KATAKI.
3 жыл бұрын
amazing work
@monkeybarmonkeyman
3 жыл бұрын
Make the wheel two-part so it snaps or threads together. Only other thing would be ensuring the rim fits the tire more precisely. There's no way that would hold air. Otherwise, quite the exceptional job!!
@semriezebos6293
3 жыл бұрын
Wow Nice vid!
@hariviswanathan400
3 жыл бұрын
Was waiting for a new vid. Great as always. Just wondering can you make a video on the newest f1 and f2 intros
@jelof21
3 жыл бұрын
Can you make this a kinda series but try to recreate drivers helmets
@Sharp_Stone
3 жыл бұрын
Try to sand down to original tire markings for the next one. Also, a good 3D printer ender 3-v2 costs around £190,-. So maybe it's worth just to buy a 3D printer and some filament.
@Lastname6955
2 жыл бұрын
F1 be like: No, this isn't how your supposed to play the game.
@RenoF1
3 жыл бұрын
solid job damn
@leatherworkstation
3 жыл бұрын
You could get a better, rounder print with less faceting with different software. STLs when saved need to be told a tolerance. The default tolerances are crap for 3D printing, I lost a batch of resin prints to that.
@FXCartel
2 жыл бұрын
That was awesome
@UncleDrewIL
3 жыл бұрын
Great job!
@ThePenguinHere
2 жыл бұрын
This guy honestly deserves a pole position award
@mooymusic_1828
3 жыл бұрын
A really really cool design, mabey you could've sanded the wand of the tyre to remove the little things there, but its very nice anyway!
@daveking77
3 жыл бұрын
Wow that's a great idea! I wonder if it's at all possible to sand down the relief print off the original tyre sidewalls?
@kakajokitivi1506
Жыл бұрын
Y it would look way more cleaner
@LibertyCharge
3 жыл бұрын
bruh it looks so nice.
@climaxjumpclimaxform
3 жыл бұрын
I think another thing to make it better is to smooth out the writing on the go kart wheel..... Anyhow great job mate... Loving it
@zainhaq
3 жыл бұрын
BROOO AT K1 SPEED THEY WERE GIVING AWAY GOKART TIRES LES GOOOOOO
@PauloRicardo-pp4ml
3 жыл бұрын
Thanks mate
@Stingraeee
3 жыл бұрын
Nice idea! What a great work dude
@wilsonstevenson4366
3 жыл бұрын
Could you tell me the weight of the rim please?
@xFreeze27
3 жыл бұрын
Try to remove the tape before the paint is fully dried. This prevents the edges from cracking. For the tone: RAL 3000 looks to be better fitting. I’d even go the extra step and try to smoothen the tire flank to get rid of the Dunlop letterings
@mattamys
3 жыл бұрын
Awesome to know!
@joshihenschl1634
3 жыл бұрын
Super nice idea, especially with the go cart tyre! i might make one myself as i own a 3d printer myself what makes that build muuuch cheaper. ;) Little comment on the acetone smoothing thing: that only works with abs or asa materials, others like pla and petg wont smooth out :) in my opinion the small problem with your printed part was the 3d file being exported in a low resolution causing these steps on the circular sections in and outside the rim.
@NAn-bb3kl
3 жыл бұрын
Get in there tyres!
@THEButterKING25
3 жыл бұрын
And you should sand off the melted in logos for close ups
@udai4822
3 жыл бұрын
I wish I could like this video more than once
@mikkelduck4543
3 жыл бұрын
Make a homemade f1 Series, could be Really cool!!
@Solitide
2 жыл бұрын
You should put white under the red and get a better looking red color.
@bastialba
3 жыл бұрын
Maybe not perfect but it´s a very clean result anyway. Great job!
@yannisstathopoulos542
3 жыл бұрын
Primer, then white paint, then red paint to make it brighter. Maybe a thin yellow between the white and red to make it a bit more vivid? As for the tire texture there should be some way to remove it before painting, isnt there?
@eddy8956
Жыл бұрын
Are you sure it won't be too thick if you put 3 coats ?
@clearlygareth
3 жыл бұрын
and we are backk, lets go matt!
@10poundsimracing14
3 жыл бұрын
FINNALY
@dunkelheit7534
3 жыл бұрын
I need that, now,
@massoudnohra7376
3 жыл бұрын
Great Content!!Keep it up 🔥 🔥
@diet-water
3 жыл бұрын
Ayyyyy yoooooooooo I've made loads of those rims for lots of different race teams. At the manufacturing company I was in we made loads for Red bull, McLaren, Williams, Mercedes, Toro Rosso and a few others. We also did lots of other 1 off rapid prototyping for them, and once for Mercedes we made some actual full size ones. The rims are actually made of 7075 aircraft grade aluminium,and not stainless steel. Stainless steel would be too heavy and expensive for the race teams to buy as it almost doubles, if not triples the cost of the rims as it's such an expensive material. Anyways it's a good mimic
@eddy8956
Жыл бұрын
Wow it's super interesting, i really would like to talk more about it with you if you are okay ?
@SimStig
3 жыл бұрын
Yes should have used white primer not grey to make the red brighter
@roowut
2 жыл бұрын
it’ll probably be far more expensive but see if you can get one printed or cast in metal
@apexracing9479
3 жыл бұрын
maybe you could have trimmed the little hairs on the tire(tyre) to make it look smoother
@CarlitoCG
Жыл бұрын
I'm trying to make one, but there is an issue: the tyre shape is not good, it needs to be inflated to have the good shape... is the polyurethane strong enough to inflate it???
@keylart7588
Жыл бұрын
Medium tire next?
@mamanmahomie6747
2 жыл бұрын
love it
@neilcole
3 жыл бұрын
So clever!
@evanoeab9118
3 жыл бұрын
Mega job
@itsjackmace
3 жыл бұрын
GENIUS
@Wrx-co1yu
3 жыл бұрын
Should have put clear coat on the top of the tyre to give it that glossy look just like real life
@danielkneefel8336
3 жыл бұрын
Awesome
@roowut
2 жыл бұрын
you might be able to find someone locally to print that for you far cheaper than what you paid
@MrBuyerman
3 жыл бұрын
A good effort, until you get close it's fairly convincing, but my problem is 'I' would know...Annoyingly, I'd still probably shell out the obscene cost of a genuine tyre. But nice vid and the use of a go cart tyre was ingenious. 👍👍
@TomMrazekStig
3 жыл бұрын
I love your DIY videos.. Its awesome. :D
@Ors180717
2 жыл бұрын
Can you make a video on your 1:1 Vandoorne helmet? Is it an oficial replica? Or just a cheaper Bell helmet with the paint job?
@mattamys
2 жыл бұрын
Mentioned about the helmet in another video, but basically it was a present given to me after I left Formula E - it’s an official replica from when he first joined the championship 😁
@Ors180717
2 жыл бұрын
@@mattamys That’s amazing! Thanx for the reply!
@ggiioo-f1
3 жыл бұрын
hi. what do you think about new f1 graphics? do you prefer the small logo or the color of the team?
@michaeldahlinger8815
3 жыл бұрын
Cool project, though at that price for that print I would just recommend buying a printer for under $200 for future projects.
Пікірлер: 251