Great video. Love to see more like this with body casts, etc. Cool stuff!
@TheSlotSpot
8 ай бұрын
Thanks a lot. I do have another video up where I did a body casting.
@toddshort5997
8 ай бұрын
Awesome....subscribed a year ago. Love your tech how to videos like these. You help me alot. Tires are very expense for tyco tcr cars when you can find them. I love racing the tyco tcr cars in our club. Thank you again im in north carolina or I would love to race with you im 58 years old but connect with you like my buddies in my club. We ho drag race and have a huge afx track as well.
@hoslotcarsRacing
8 ай бұрын
Absolutely terrific video my friend great information on making silicone tires
@TheSlotSpot
8 ай бұрын
Thanks a lot!!
@johnnyirwin9838
5 ай бұрын
Great information thx for your time knowledge 😊😊
@TheSlotSpot
5 ай бұрын
Thanks a lot!!
@redsteam1
8 ай бұрын
This is another excellent video! Thank you!
@TheSlotSpot
8 ай бұрын
Thanks for watching!!
@cks_random_hobby
8 ай бұрын
I love DIY tutorials! I get overwhelmed looking at tire charts, so this may be the way to go for me. Quick question, do you need to wash the mold release off the tires? Thank you for teaching us!
@TheSlotSpot
8 ай бұрын
I never wash off the mold release off but also have a habit of wiping my tires off with a little alcohol every time before I put a car on the track.
@sonofsega816
8 ай бұрын
This is very cool! Have you ever tried making Silicone tires for your 1/32 and 1/24 scale cars?
@TheSlotSpot
8 ай бұрын
Yes I have made some for Scalextrics.
@davematthews2317
8 ай бұрын
Excellent tutorial. Thanks for the video.
@TheSlotSpot
8 ай бұрын
No problem. Thanks for watching.
@huggybear9937
8 ай бұрын
Pretty good video you have to bring some tires down to pop's and let me try some on my t jet's
@almcg4425
8 ай бұрын
Awesome video and information 👍. Al
@TheSlotSpot
8 ай бұрын
Thanks a lot.
@SlotCraftMaster
5 ай бұрын
Nice video, thanks for sharing 👍 Subscribed
@rawskidance145
6 ай бұрын
Wow yo you r a God send... that shit was awesome. UDA man bro thank you
@whitmanft
7 ай бұрын
THx for the info..!1 This has definitely peaked my interest..by the way about how tires ( 1/32 size) do you think you can get out of 14 oz..?
@jcsgaragejohnc.5027
8 ай бұрын
Awesome video, TY for sharing. May I ask where did you purchase your supplies for this project, also looking to add the black tint. TY in advance
@haroldmarlow8844
8 ай бұрын
Where is the club racing you do I would like to get in to racing
@TheSlotSpot
8 ай бұрын
We are located around the Lehigh Valley PA.
@haroldmarlow8844
8 ай бұрын
I live in Quakertown
@TheSlotSpot
8 ай бұрын
@@haroldmarlow8844 if you want send me an email at theslotspot@gmail.com
@rawskidance145
6 ай бұрын
What do you suggest for level 2 tires the stronger magnets and would it be better if you used stiffer compound for the mold
@TheSlotSpot
6 ай бұрын
The stiffer the mold that harder it is to de mold the tires but yeah harder tires are good for stronger magnets because the force pulling down makes the softer silicone go out of round. The softer will also roll over easier.
@whitmanft
7 ай бұрын
would this be good for 1/32 cars as well?
@TheSlotSpot
7 ай бұрын
Yes I have used this same method to make tires for both Carrera and scalextrix cars.
@dodgeramsport01
Ай бұрын
have you tried this with RC cars?
@TheSlotSpot
20 күн бұрын
No I haven’t. I’m not sure how silicone would work on an RC car. Silicone likes to pickup a lot of dust. You may be able to use the same process but use some type of rubber to pour into the mold.
@dodgeramsport01
19 күн бұрын
@@TheSlotSpot thank you
@whitmanft
7 ай бұрын
Is there much difference between smooth-on 31 and the 30 ..?
@TheSlotSpot
7 ай бұрын
31 has a 5 minute pot life and 23 minute cure time. 30 has a 45 minute pot life and 6 hr cure time. They are both a 30 shore silicone.
@ottodetroit
8 ай бұрын
what makes these custom silicones better than others? Or just mostly a DIY video ? either way thanks for vid
@TheSlotSpot
8 ай бұрын
More of a DIY. Typically if I can do something myself I will but I also like that you can control the hardness. If I use 30 shore I know my tires are 30. If I buy tires from someone the hardness is probably unknown. Tires are also roughly 2$ a pair so for the price of this material I could get about 10 pairs of tires versus being able to make probably over a thousand tires for the same price.
@ottodetroit
8 ай бұрын
@@TheSlotSpoti might try this myself since my son and his buddies are getting into the hobby. we just built a 4 lane lifelike track. Softer tires would def help on raceday
@slick5110
7 ай бұрын
Just my opinion but I’m hoping it will help stop a couple of my cars from spinning out going around turns even when trying not to.
@christopherbusch1933
8 ай бұрын
Awesome video. Maybe I missed it, but do you apply mold release to the original tires?
@TheSlotSpot
8 ай бұрын
I did not because my originals were rubber. If you are using silicone tires as a model then you would need to apply mold release.
@hoslotcarsRacing
8 ай бұрын
So you use the same product to make the mold as you do for the tires you just use the release spray to prevent them from sticking when making tires hope that makes sense what I’m saying
@TheSlotSpot
8 ай бұрын
Yeah correct because nothing sticks to silicone like silicone. You would only use a different product if you wanted softer or harder tires. You can also make the mold out of softer or harder silicone.
@victorborme9400
5 ай бұрын
@@TheSlotSpot I've made urethane tires, where I made the mold out of silicone, and the extraction process is easy with no release agent needed. I would think reversing the process should work. Meaning a urethane mold and use the silicone to make the tire. Have you ever tried that? Just curios - I'm about to start making tires and was going to experiment with urethane mold.
@TheSlotSpot
5 ай бұрын
@@victorborme9400 I would still use a release agent. Not much stocks to silicone so the urethane tires will pop right out but silicone also works as an adhesive so it might stick to the urethane Baby powder also works good as a release.
Пікірлер: 50