I like that you used a simple model to explain because most tutorials use really complicated stuff that is hard to follow when you're getting started
@WillysGarageNorway
2 жыл бұрын
Agreed, thanks 👍
@KENTEKELLER
6 жыл бұрын
Always nice when some one steps up to the plate to help get us newbies started. Thanks
@WillysGarageNorway
6 жыл бұрын
Kent Keller Hi and thanks :)
@crozwayne
3 жыл бұрын
yeah coz that Lars bloke is a prick
@lantechbd
5 жыл бұрын
Now I am a CNC Programmer, You were my first teacher. Respect Sir....!!!!
@WillysGarageNorway
5 жыл бұрын
Hehe, good to hear. Thanks! 😁👍
@vapubusdfeww1353
4 жыл бұрын
I have a doubt, what is point of learning G code if we are able to generate the code with this type of program?
@sofiakhan4356
3 жыл бұрын
@@vapubusdfeww1353 to be able to interpret them. It’s like when we learn to make drawings by hand when we have design software present
@Martin-uj6zn
8 ай бұрын
I know this is outdated but its by far the most concise and simple video to follow for a complete newb on F360 cam. Thank you!
@RyanNiemer
6 жыл бұрын
This was one of the easiest to understand tutorials i've seen.... planning on getting a CNC soon and trying to learn some basic Fusion 360 steps before I get the actual machine. Thanks again
@WillysGarageNorway
6 жыл бұрын
No problemo, thanks fir watching and the feedback 👍😁
@stemwisevids
6 жыл бұрын
Very basic and very simple. This was exactly what I needed. I watched some of the Autodesk CAM tutorials but I kept feeling like I was thrown in the deep end. This one started me off just right. Since I use an Arduino based machine, it was even more perfect. Thanks!
@WillysGarageNorway
6 жыл бұрын
and thanks for watching :-) This is exactly the reason why I made this video
@etusch
6 жыл бұрын
Great video. Directly showing what I want to know. Not bullshit. Thank you very much
@WillysGarageNorway
6 жыл бұрын
You are welcome, thanks for watching 👍😁
@mostlyoldthings
2 ай бұрын
I've been trying to do this for several weeks, this is the best video on the subject, straightforward and effective, thank you very much
@WillysGarageNorway
2 ай бұрын
No problemo 😄 Old video but still relevant, glad it helped!
@mostlyoldthings
2 ай бұрын
@@WillysGarageNorway 😊👍
@DIYBuilds
6 жыл бұрын
Great video
@WillysGarageNorway
6 жыл бұрын
Thanks for watching 😁👍
@madhan2984
3 жыл бұрын
cam is not available in fusion 360 2022 version where to find that ?
@sonofsun4
4 жыл бұрын
Hi. I do not understand, why after selecting your axes, while z is pointing up, the x arrow points left(it said x, not -x..... assuming it is +X) and y arrow points down towards the operator (it said Y, not -y...which assumes +y). Normally, in Cartesian coordinate system x+ goes to the right and y+ goes away from operator.....search Internet for Cartesian coordinate system, there it is clearly explained.....So this arrow orientation is confusing and in my opinion wrong! Please explain!
@WillysGarageNorway
3 жыл бұрын
You select the option that fits your machine
@danpaystrup5788
4 жыл бұрын
dude you are setting your x and y backwards
@fraserdaniel3999
4 жыл бұрын
You say that this is for CNC and 3D printing. Does this g-code apply for 3D printing?
@WillysGarageNorway
3 жыл бұрын
No, but tou can export stl for 3d printing 👍
@nikolaradakovic5050
4 жыл бұрын
I wonder if Autodesk wrote all those post process code or they got it from machine manufacturer?
@WillysGarageNorway
3 жыл бұрын
Not sure
@jasondevault5066
3 жыл бұрын
What if I wanted to mill the whole part you designed on the screen instead of just the pocket?
@WillysGarageNorway
3 жыл бұрын
Hi, you can use a 2D countour toolpath to carve the outside edges of the square. Remember to set the multiple depths setting :) I plan to make a new video on this 👍
@crozwayne
3 жыл бұрын
what about contouring?
@JyskMaker
6 жыл бұрын
is 1m pr sec not to fast???
@WillysGarageNorway
6 жыл бұрын
Allan Madsen yeah! Thats way too fast. This was an error from my side, its of course 1000mm/minute.. NOT 1000mm/second 😂 I wil put a card on the video and correct the fault in the description. Thanks for letting me know 👍👍😀
@narendrateegala8854
2 жыл бұрын
Wonderful job sir can we do it student version also sir? Pls reply
@WillysGarageNorway
2 жыл бұрын
Thanks, what is your question?
@iknowaguy1564
5 жыл бұрын
This video was very valuable. Thank you for taking your time in posting it!
@WillysGarageNorway
5 жыл бұрын
And thanks for watching it :)
@soaringhal
6 жыл бұрын
Hei Fredrik. Quick tip, when selecting the plane for your sketch choose the X/Y plane at the beginning (so the blue arrow point to the "blue sky") Then you dont have to redefine the XYY directions of your stock :) Thank you for sharing :)
@WillysGarageNorway
6 жыл бұрын
soaringhal Hei :) good tip, thanks
@robertleo7486
5 жыл бұрын
Willy, you just helped me get to my next step in my project. As a newb it is hard to find a video that explains basic things that are Mission Critical to proceed. Thank you, love the background music.
@WillysGarageNorway
5 жыл бұрын
I'm glad I could help :) Thanks for watching 👍
@cloudcamdrones
5 жыл бұрын
I tried to use Fusion 360 to make a square and I'm using Nc Studio, but the post processor (Fanuc or Axyz) don't make a square, it make a circle with a square, like the head of Mickey Mouse. Is a problem with post processor? Because in simulation is ok
@WillysGarageNorway
5 жыл бұрын
Im have no experience with those post processors. Is there a possebility tochose nc studio?
@edg5414
4 жыл бұрын
Hi is Ed is the Fusion 360 that you are using is a free version?
@WillysGarageNorway
4 жыл бұрын
Yes, its free for hobbyists and startups 👍😀
@HouseofCustomNz
2 жыл бұрын
Awesome thank you! Very clear and easy
@ianbertenshaw4350
5 жыл бұрын
I must have watched a dozen tutorials on this and this is the only one i understood ! The other ones kept jumping about to show you some feature that wasn’t relevant . Thanks Willy !
@WillysGarageNorway
5 жыл бұрын
ian bertenshaw I’m glad it helped you 👍🏻😀 I made this video beacause of the same problem you had. I missed an easy introduction how to make a simple g code. The rest we can figure out as we go 😀
@curryandapint
5 жыл бұрын
Great video and thanks a lot. I'm having one problem though. How do you align the starting point in the tool path with the machine? I create the origin in 'Stock box point' to the top left front corner, select the same spot on my CNC software (Grglcontrol Candle) and the tool always does a little 'walk' before starting the job. (if interested read below) I can 'work around it by milling some polystyrene to see where the stock should go but I'd rather understand how to align the starting point with the toolpath and the stock. I've got a small 3018 'Woodpecker' machine btw.
@WillysGarageNorway
5 жыл бұрын
If you have set your origin (zero-point) in fusion like you mentioned, it should be where your machine starts the toolpath. But if you have set some kind of zero-probe option in candle(I am not familiar to that program) there could be a pre determend offsett from your set zero point (origin point) I would check over the preferences in candle software and make sure there are no offset sett to any of the axis. Let me know how it goes👍
@JyskMaker
6 жыл бұрын
Now that you are using grbl, take a look at estlcam, ist can run on a arduino mega, with lot of in/out pins. :-)
@WillysGarageNorway
6 жыл бұрын
I have used Estlcam before.. If you look at my 500 subscriber plaque video you can see I use that program :-) It's good software and I'm going to use it more in the future :-) But if i design things in Fusion 360 it's lot better using it to make toolpaths. Thanks for watching 👍😀
@cbnation1
5 жыл бұрын
Is there a way to generate a file per tool used? I have a job that requires 3 different tools and I need to change the router bit by hand.
@WillysGarageNorway
5 жыл бұрын
Hi, you can make multiple toolpaths under one "setup" in the manufacture space. When you are finished with the toolpaths you can right click on them and select "post process" and then export one g code per tool used. This is how I do it :)
@ailll1
4 жыл бұрын
Hi, I tried to create a gcode for a cnc plasma cutter but when I post it and save it to my computer, the file comes out as "failed". The file name ends in .nc.failed. When I open it, there's no gcode, only text that says "!Error: Failed to post data. See log for details." I'm not sure why this happens and where I can view the logs to understand what's happening...
@WillysGarageNorway
3 жыл бұрын
Hmm, problem fixed?
@ailll1
3 жыл бұрын
@@WillysGarageNorway Yeah kinda, I had to use a modified GRBL post processor that someone posted on autodesk forums. I'm posting Gcodes fine now but the Gcode doesn't contain torch start/stop commands. Still trying to figure that out.
@WillysGarageNorway
3 жыл бұрын
Ok, hope you figure it out 😀
@jakariasbulldozer9086
Жыл бұрын
Very good tutorial, I liked.
@WillysGarageNorway
Жыл бұрын
And thanks for watching 👍😄
@fearest288
3 жыл бұрын
Please, excuse a total rookie question...but 1000mm/sec. Do actually the tool moves 1m sideways in just 1second? How about the retardation? Is the machine bolted to the floor? I have just brought...a machine, more likely to put on a table. I don’t think ill’ start with 1000mm/sec. :-)
@matthewfairbanks8914
4 жыл бұрын
Where is the next video you talk about?
@WillysGarageNorway
4 жыл бұрын
Hi, what was I suppose to show in that video?
@Captainziadkhan
2 жыл бұрын
You are the man I was searching for so long
@WillysGarageNorway
2 жыл бұрын
Ahhh, hehe I'm glad you found what you were lookong for 👍😀
@ask.q
6 жыл бұрын
Thanks Mate! Nice and easy to follow along with and comprehend! Cheers
@WillysGarageNorway
6 жыл бұрын
ASK.Q No problem 👍🏻 thanks for watching
@vrva3138
4 жыл бұрын
Are you really using 1000mm as cutting feed rate? coz most bits has an ipt of .002-009 unless you are using a 1" bit or something. I am confused.
@arindammajumder7781
4 жыл бұрын
Is that Post processor generate g codes
@WillysGarageNorway
4 жыл бұрын
Fusion 360 is generating the g codes 👍
@BeWithWasif101
Жыл бұрын
sir actually i think g codes does not work in case of student version.
@Planeflake
5 жыл бұрын
Big Willie Style, tusen takk fra Tromsø.
@WillysGarageNorway
5 жыл бұрын
Ikke noe problem Oli 👍😁 Thanks for watching
@gertkristensen6451
Ай бұрын
OHHHHHH🤣🤣🤣🤣 1000MM PR SEK CAN YOU CNC RUN 90.000 RMP 😅😅😅😅
@carlwheeler3403
4 жыл бұрын
On a side note, I tried using this procedure on several 6 mmm holes with a 3 mm countersink. After about a dozen attempts I was successful. I initially tried doing the 6mm hole and the 3mm countersink for all the holes in a single tool path but I ran into issues. I broke it up into 2 separate tool paths (1 for the 6mm holes, and the second for the 3mm countersink) it worked perfect.
@ahsanalvi3811
Жыл бұрын
hello sir,I have question i set everything but when i simulate it toolpath error comes out how i adjust it please tell me about it thank you.
@EnergySeeker
2 жыл бұрын
is it possible to do 5 axess in fusion 360 ? how ?
@WillysGarageNorway
2 жыл бұрын
Only in the paid version, not free version 👍
@EnergySeeker
2 жыл бұрын
@@WillysGarageNorway thanks for your fast answer
@nardosmesfin7915
4 жыл бұрын
very helpful men 10x a lot
@WillysGarageNorway
4 жыл бұрын
No problem m8 :)
@raggamanster
6 жыл бұрын
Great video!!! Thank you very much!
@WillysGarageNorway
6 жыл бұрын
Thanks and thanks for watching 😁👍
@davidrivas3708
4 жыл бұрын
you made this video on my birthday and this is the best present I've ever gotten, even if I opened it late. I freaking love you.
@WillysGarageNorway
4 жыл бұрын
David rivas Hehe, happy birthday 😂
@davidrivas3708
4 жыл бұрын
@@WillysGarageNorway it's January 12th and my gf will be away so ill take it mate! hahaha
@kcraig2k2k
4 жыл бұрын
Thanks for the video!!!!
@WillysGarageNorway
4 жыл бұрын
And thanks for your feedback 👍😀
@latengocomoburro
5 жыл бұрын
WOW too complicated, I am starting to regret building my own CNC machine.
@WillysGarageNorway
5 жыл бұрын
Hehe, no its not realy that complicated, but its a lot of settings and details to think about. If your more interested in doing signs and letter carving I know there are some simpler software options out there :)
@sbornoe
6 жыл бұрын
🇳🇴 here. Is there a option to clone a bad STL file into a clean new format cnc ready file? Nice video, learning a lot. Just need the cnc machine;)
@WillysGarageNorway
6 жыл бұрын
Sbornoe I dont think you can convert a stl file to a .gcode file directly. You have to have a cam/toolpath generator program
@kithuatvasangtao121
2 жыл бұрын
Hi ,can you show for me ,how to make gcode for cnc 5 axis used mach3 cnc,thank
@Omcsesz
4 жыл бұрын
Hello! Was there an update in the program? I don't find the CAM view now.
@WillysGarageNorway
4 жыл бұрын
Yes, its called manufacture view now
@johnchausow4857
6 жыл бұрын
Thank you so much!!!! Just built my first CNC machine this last week but haven’t been able to figure out how to change the axis points in CAM. Thank you so much!!!!!!
@WillysGarageNorway
6 жыл бұрын
John Chausow you are welcome! :) Thanks for watching
@CiaranWhelan
6 жыл бұрын
Actually I was just about to ask for the next video on the next step like adding the material to the CNC and putting it at zero etc... I just heard in the last sentence you will do this. Thank you.
@WillysGarageNorway
6 жыл бұрын
No problem sir :) I just released the video about the Universal g-code sender. kzitem.info/news/bejne/omew0oBpqmRke34
@DiabloSpearguns
6 жыл бұрын
excellent video and explanation, thank you !
@WillysGarageNorway
6 жыл бұрын
Diablo Spearguns Thank you 👍🏻😀
@CiaranWhelan
6 жыл бұрын
Many thanks for doing this video, I replay it almost daily to understand a bit more. Could you do another video but more based on speeds and feeds for aluminium milling pockets and profile cutting.I am using a Chinese 400w spindle if that helps.
@WillysGarageNorway
6 жыл бұрын
Hi and thanks for watching :-) I would like to make a video with more details on the Fusion 360 toolpath making. So keep an eye on my channel and maybe the video will come in the future.
@carlwheeler3403
4 жыл бұрын
Great video !! This video clarified many of the Fusion360 CAM capabilities. Creating the G-Code from Fusion360 was a giant black hole for me, this video provided perfect clarity. Thank you !!
@WillysGarageNorway
3 жыл бұрын
Thank you :)
@mrkennethporter
5 жыл бұрын
Perfect. Exactly what I needed
@WillysGarageNorway
5 жыл бұрын
I'm glad I could be of assistance. Thanks for watching :)
@davecoates2308
4 жыл бұрын
Thank you. Very handy
@WillysGarageNorway
4 жыл бұрын
No problem:)
@TheWalter777
4 жыл бұрын
your the best. thumbs up
@WillysGarageNorway
4 жыл бұрын
Thanks man :)
@didiersee
2 жыл бұрын
Congratulations for precise explanation and thank you for sharing from Belgium.
@WillysGarageNorway
2 жыл бұрын
No problemo:)
@thejaaddluri1645
3 жыл бұрын
After many videos. I am finally satisfied with your video as I am a beginner. Thank you.
@WillysGarageNorway
3 жыл бұрын
Thanks, I'm glad you could get some use out of my videos 👍😃
@RickGreenPhoto
6 жыл бұрын
I am a little confused. when you saved your file did you click post and why did a contour suddenly appear? Seem like the video jumped an I missed something basic. Great video though and thanks for the help.
@WillysGarageNorway
6 жыл бұрын
Thanks 👍 Can you give me a time stamp when this happened?
@RickGreenPhoto
6 жыл бұрын
8.03
@WillysGarageNorway
6 жыл бұрын
@@RickGreenPhoto ahh, I understand what you mean. I did make a cut there, but I only saved the file (g code) in my projects folder. It looks like there is a new contour toolpath there but it has nothing to do with the meaning of what I'm saying in the video. But if there is something there you did not understand, please let me know 👍
@Breadbored.
5 жыл бұрын
They should embed your videos in the Help file. Great explanation.
@WillysGarageNorway
5 жыл бұрын
Late reply but thanks!! :)
@BreakitDownBarneyStyle
4 жыл бұрын
Very thankful for this video. I was trained on MasterCam but I currently have Fusion 360. Thank you very much!
@WillysGarageNorway
4 жыл бұрын
No problem, thanks for watching:)
@robertoquinonescastillo2144
5 жыл бұрын
Thanks for the video Sir. Just a question, what if you have multiple too operations and what to export the g code. Thanks!
@WillysGarageNorway
3 жыл бұрын
Export as different files, change tools between files
@bilimwoodworks
6 жыл бұрын
Thank you very much!!~ from Korea
@WillysGarageNorway
6 жыл бұрын
Hi Korea :) Thanks for watching~ from Norway 😀👍
@ovidiusiatat8370
6 жыл бұрын
A lot of people are explaining on their vids but yours is very straight forward. Thank you very much . This is great help
@WillysGarageNorway
6 жыл бұрын
Thank you. It's feedback from all you people thats keep me making more videos :-) 👍
@danmccurry3810
4 жыл бұрын
Great advice on cutting pockets and easy to follow instructions.... Thanks for posting!
@WillysGarageNorway
3 жыл бұрын
No problem 👍
@edg5414
4 жыл бұрын
Thank you I am having issue using it looks like the free version now is limited. I Can't access the cam. Thanks again.
@WillysGarageNorway
4 жыл бұрын
In the newest versions the CAM enviroment is called "Manufacture" enviroment. Do you have access to that?? Then its ok
@jehjeh6368
4 жыл бұрын
C est clair et précis et bien mieux expliqué que dans de nombreux tutos francais ...Bravo!!!
@xdecroix
10 ай бұрын
you just saved me 3 months and 1800€.
@mobileiotapps967
Жыл бұрын
Well, explain thank you for your tutorial.
@SaulMarquezRousset
6 жыл бұрын
Extraordinario Tutorial Willy para poder generar Toolpath y exportar código G; , muchas gracias por compartir, saludos desde México.
@WillysGarageNorway
6 жыл бұрын
Thank you so much for watching! :-) you are welcome
@EslamsLab
4 жыл бұрын
thanks, willy I really learned something useful today
@WillysGarageNorway
4 жыл бұрын
Its a nice day when one learn something usefull, thanks for watching :)
@torvaga
4 жыл бұрын
Minor detail: Square has all four sides the same length. You drew a rectangle ;)
@WillysGarageNorway
4 жыл бұрын
:)
@lucvandamme9889
4 жыл бұрын
Gr8 tutorial ready to use!
@WillysGarageNorway
4 жыл бұрын
Thanks!
@maximusandsenecagloballlc1209
2 жыл бұрын
can u generate some gcoses fro me using my STL files?
@rui.s.moreira
4 жыл бұрын
Simple and clear explanation. Thanks you very much!
@WillysGarageNorway
4 жыл бұрын
And rhanks for watching 😀👍
@bjornosten689
5 жыл бұрын
Tack Villy!
@WillysGarageNorway
5 жыл бұрын
Ingen problem :) 👍
@cncdude9680
Жыл бұрын
Are you using the machining extension?
@umargul5644
3 жыл бұрын
Great job sir
@WillysGarageNorway
3 жыл бұрын
Thanks man :)
@FlightSim2703
3 жыл бұрын
I brought my dwg drawing from Autocad 3D to trail version of Fusion 360, and prepared Cam, but have problems with choosing the correct bit, because I can't find the bit, which came with my CNC 3018 Pro Max, would you please tell me if we can use any generic dril bit to be used as (30 degree V shape) thanks so much. 😊🙏
@WillysGarageNorway
3 жыл бұрын
In the first banner in the toolpath settings, you can click on "tool" to select witch tool you want to use. When you ate inside the tool liberary you most likley have to make yourself a new tool. This is done by clicking the pluss icon. Then you can make a new tool, flatt end, v bit, ball nose and input your tools info. Good luck :)
@bollywoodcaravan9164
6 жыл бұрын
Nice video....
@WillysGarageNorway
6 жыл бұрын
Thanks 👍😀
@falkerjones8249
5 жыл бұрын
Excellent little video! Goes through all the basic steps from beginning to end
@WillysGarageNorway
5 жыл бұрын
Thanks a lot. Good that it helps people 👍😀
@rustyshackleford928
2 жыл бұрын
Thank you sir! Just getting started and this was a great help.
@WillysGarageNorway
2 жыл бұрын
Glad to be of help, thanks for watching :)
@TheMichaelGrace
5 жыл бұрын
Very helpful for a newb like me. Thanks.
@WillysGarageNorway
5 жыл бұрын
Thanks :)
@RichardRecupero
6 ай бұрын
That was actually helpful thanks
@laserdesigns
Жыл бұрын
thank you
@WillysGarageNorway
Жыл бұрын
Youre welcome, thanks for watching :)
@davidparums6498
11 ай бұрын
Just what I was after. Thank you!
@michalech6654
5 жыл бұрын
Very helpful video! Good job ;)
@WillysGarageNorway
5 жыл бұрын
Thanks :)
@danmccurry3810
4 жыл бұрын
Well explained, just the information I was looking for...thanks for posting!
@WillysGarageNorway
4 жыл бұрын
Thanks, no prob :)
@lucasflaviocota8756
4 жыл бұрын
Thank you very much for this clear explanation!
@WillysGarageNorway
4 жыл бұрын
You are welcome and thanks for watching:)
@EdgarHernandez-ee7vo
5 жыл бұрын
Thank you, I thank you very much, from my Mexico
@WillysGarageNorway
5 жыл бұрын
Hi Edgar! Thanks for your feedback, from Norway ;-D
@jonnafry
2 жыл бұрын
Straight forward no nonsense primer - thanks for this.
@WillysGarageNorway
2 жыл бұрын
And thanks for tje feedback :) 👍
@dbz4586
4 жыл бұрын
Can you conventional mill for the rough pass and climb mill for the finish pass? I was taught climb mill is more likely to leave a nicer finish.
@WillysGarageNorway
4 жыл бұрын
The climb milling could leave a nicer finish but your machine needs to be able to handle it. What people do is to buy down and/or up spiral tools to get nicer finish thou
@dbz4586
4 жыл бұрын
@@WillysGarageNorway But can you add a climb milling pass if you want? Through the software?
@TheAzimba
5 жыл бұрын
Very glad that I've found your channel. Cheers
@WillysGarageNorway
5 жыл бұрын
Im also glad. Thanks for watching 😁
@HallON3D
4 жыл бұрын
Thanks for that video you make my day
@WillysGarageNorway
4 жыл бұрын
and thanks for watching :-)
@Raindrops4891
4 жыл бұрын
my friend this video is very important and you must never delete it.
@WillysGarageNorway
4 жыл бұрын
Thanks, I wil never delete it! 😀👍
@CiaranWhelan
6 жыл бұрын
Hi there, I meant to ask if you can do a tutorial video of profile cutting some letters of the alphabet from some cheap 3mm plywood. This will then teach us how to use a different method of CNC by profile cutting with tabs so the inside part doesn't move. I would love to learn that from you.
@WillysGarageNorway
6 жыл бұрын
Ciaran Whelan Hi, that sound like a nice project. I would also like to learn a bit more about tabs. Thanks for the tip. I will try to make the video soon ;)
@CiaranWhelan
6 жыл бұрын
That would be awesome. I have had a bit of a play around with the tabs and these seem very easy. I love that you can make maybe 3 passes of 1mm, and the last pass can be the tabs at 1mm thick, and 3mm wide. It gives you options to space the tabs etc. But I have not really done more than that nor have I done any profile cutting of Ply. I think if I have that video as my starting point to learning more about my CNC, then I can cut some letters out of MDF or Ply for my girls to paint up and have fun with them. Have you seen how expensive letters are from craft shops? My goodness, maybe a 6mm piece of MDF could make so many numbers and letters etc. I look forward to that video for sure, as it will actually be something that I will like to try. And thanks again for these awesome videos.
@rbondy008
3 жыл бұрын
The easiest video I've watched to setup your CNC. Cheers
Пікірлер: 324