Ich habe die Mischung in klein bzw. weniger nachgemacht (ohne titan). Also, das reine anzünden dieser Mischung ist von der Reaktion her sehr heftig und hellweiß verpuffend. Wahnsinn. Ganz einfache Mischung. Sehr geil👍🏻
@aztecworrior79
3 жыл бұрын
You forgot to mention don’t use a tore bag 😆
@firesmithmanufacturing9376
3 жыл бұрын
Ha ha... yeah it got snagged right when I was starting the filming.
@DIOR-00000
Жыл бұрын
What does copper oxychloride do in this whistle mixture i have seen a lot of videos and no one add copper oxychloride ?
@Zipi11
9 ай бұрын
It serves as catalyst, some also use red iron oxide
@fbisstepbro3698
11 ай бұрын
Hey! Im a little new but i have 2 questions. Firstly, why is your copperoxychlorid blue? Mine is always green as copper should be. Is mine still good? And second. Can i also mix this without the wet mix? Just all 3 in one bag. Best whishes
@firesmithmanufacturing9376
6 ай бұрын
Mix wet, for safety.
@Chris-rf8nj
8 ай бұрын
Is it possible to use alcohol mixed with water instead of vaseline and laquer thinner ?.
@firesmithmanufacturing9376
6 ай бұрын
You really want to use a solvent to help disperse the petrolium jelly. Whistle fuel presses better (and it's tons safer) to press with a lubricant.
@SandBland
2 ай бұрын
do you know if titanium has an effect on the thrust of whistle fuel?
@jeremywarring5338
2 жыл бұрын
What measurement do you use for the chemicals? Grams?
@firesmithmanufacturing9376
2 жыл бұрын
Yes. Weights are always in grams
@lollerbol
Жыл бұрын
@@firesmithmanufacturing9376 does it really matter? Arent these just ratios?
@firesmithmanufacturing9376
Жыл бұрын
@@lollerbol Nope, as long as your using weight instead of volume. You can use grams, pounds, stone.... whatever you like so long as you are consistent.
@LaunchingRockets
Жыл бұрын
Hey man I have a question it maybe stupid but please I’d really appreciate you shedding some light on this. The comment up there somewhere about parts, he says 101 parts was confusing. I think I understand the parts but you say you made a 500 gram batch wouldn’t it need to be 505 grams basically 101 parts call it 101 grams break it down 64 grams blah blah is this correct?
@sandmanbub
3 жыл бұрын
@Whoop!
@timaversa964
3 ай бұрын
Are the measurements done in grams? So thats 64 grams of potassium perchorate, 32 grams of benzoate and 2 grams of copper oxychloride
@lennix7362
2 ай бұрын
Yeah but he did a batch of 500 grams
@timaversa964
Ай бұрын
@@lennix7362 ooo ok good to know
@marcomoreno513
Жыл бұрын
What can you do for this recipe to have less thrust and lifting power to it or what chemical make it lift into the air if you can awnser my question it would greatly be appreciated! Thanks
@firesmithmanufacturing9376
Жыл бұрын
I'm not sure I fully understand your question, but generally speaking, there are a wide variety of whistle fuels used in the pyrotechnic field. Each have different burn rates and sounds. It's best to use the fuel that most closely works with the effects you are hoping to achieve.
@0pyro
Жыл бұрын
@@firesmithmanufacturing9376 i'm actually re reading this some time later and thought he actually meant how he could make the fuel not as strong basically as shown in this video kzitem.infoeNikJbofsXc?feature=share
@indramayuinspiratifkreatif9305
3 ай бұрын
pelarut nya menggunakan apa bro?
@daikin7777
2 жыл бұрын
Ok where is next step to construction in tube...test?
@firesmithmanufacturing9376
2 жыл бұрын
Look at the video showing construction of the rocket.
@LVIS-a
Жыл бұрын
@@firesmithmanufacturing9376 could you link this in a pinned comment maybe?
@springbonnie105-aka-Fur-Tec
Жыл бұрын
is it possible to mix it in a container like a jar instead of a bag?
@goodmaro
10 ай бұрын
I've done a similar mixture (Na salicylate rather than K benzoate type, stearic acid instead of petroleum jelly) in an open aluminum pie tin with a wooden spoon, outdoors, adding solvent as needed to keep the mixture stirrable. I sieved only 3 times. It takes much longer to dry -- a week and it still smelled of the mineral spirit. Stearic acid gave a much stiffer dried compo than vaseline does. I've also done it with no carrier solvent at all in a zip-lock bag, dunking the closed bag as needed in a hot water bath to keep the petroleum jelly fluid. The petroleum jelly went in to coat the bag first. Mineral oil is an alternative I haven't tried yet to dissolved petroleum jelly. I'm not sure whether any of these methods is safer than the one I used to use, wherein I first smeared petroleum jelly over the sieve, then sieved the KClO4 thru that, then the salicylate. If we're going to be sieving the complete mixture anyway, where is the anti-friction action of the petroleum jelly most needed? I'd assume the pushing of the compo against the metal of the sieve is where lubrication is most needed; the compo also picks up the lubricant on each passage thru it.
@ngarmy6602
11 ай бұрын
Can I melt 3% wax and add some pure acetone to it and use that for mixing it whit whisel mix potasium benzonate mix ?
@firesmithmanufacturing9376
6 ай бұрын
Yes, works fine.
@زكيقدره
Жыл бұрын
Can I use salicylic acid as whistle rocket fuel?
@rizalmaulana2144
2 жыл бұрын
If copper oxcychloride is replaced with iron oxide is it possible, and potassium perchlorate is replaced with potassium chlorate?. I hope you answer my question
@matthewpierce6420
2 жыл бұрын
Dont do it
@lollerbol
Жыл бұрын
Honestly iron oxide is fine but KCLO3 (potassium clorate) is not recommendent. You have to press these mixtures into a tube and there is risk of ignition working with less stable formulas. But the honest answer is yes it could be done.
@maheshmb4540
10 ай бұрын
Titanium mixing percentage,and what mixing water name
@demonetizedhistory5806
2 жыл бұрын
Can I use sodium benzoate instead of potassium benzoate because I searched it up here In Australia and it's only coming up with sodium benzoate, all the potassium benzoate are well over a hundred dollars.
@firesmithmanufacturing9376
2 жыл бұрын
Yes, there are a bunch of sodium benzoate whistle fuel formulae out there.
@giovanniarrabito4464
6 ай бұрын
😮q
@PYRO_CREATIONS
7 ай бұрын
Us this stonger and louder than the kclo3 and garlic acid whistle??
@firesmithmanufacturing9376
6 ай бұрын
Please stick to known and published formulae.. for safety's sake.
@PYRO_CREATIONS
6 ай бұрын
@@firesmithmanufacturing9376 yeah but only garlic is available here
@bomsexplosive
2 жыл бұрын
can you use perc with anti cake for whistle rocket fuel?
@PyroMax
2 жыл бұрын
without. I've had perc with anti cake and it would hardly whistle. No difference in thrust though
@bomsexplosive
2 жыл бұрын
@@PyroMax thank you for the info
@firesmithmanufacturing9376
2 жыл бұрын
The quality of perc fluctuates wildly. Without anti-cake seems to be the best.
@semoudemoleman1798
3 жыл бұрын
where do you get these chemicals?
@firesmithmanufacturing9376
3 жыл бұрын
Several vendors sell chemicals. Skylighter, Pyro Chem Supply and Fireworks Cookbook are all online.
@tsopremerecords9879
3 жыл бұрын
Fireworks cookbook
@tsopremerecords9879
3 жыл бұрын
Fireworks cookbook has recipes that do the math for you and you can print!
@lollerbol
Жыл бұрын
A question because i never did this. Whistle fuel is known for being friction sensitive. Is screening the mixture considered "dangerous"?
@firesmithmanufacturing9376
Жыл бұрын
Though not a sensitive as flash or strobe fuel, whistle is indeed a mixture that must be treated with respect. That being said, using valseline dissolved in lacquer thinner greatly desensitizes the fuel and makes screening much safer.
@cuongvocong1991
3 жыл бұрын
Can you give me the ratio of the solvent please?
@firesmithmanufacturing9376
2 жыл бұрын
I keep my petroleum jelly at 3%. The amount of lacquer thinner used to dissolve it isn't terribly critical. It is just used to help distribute the jelly throughout the fuel.
@rocketmakingbengal9984
3 жыл бұрын
Is it better power than sali,and less sensitive,pls reply
@firesmithmanufacturing9376
3 жыл бұрын
Salicylate tends to burn a bit more vigorously than Benzoate. Salicylate whistle rockets tend to use shorter spindles. I prefer the sound and lifting power of Benzoate whistles, though. It's really just personal preference.
@rocketmakingbengal9984
3 жыл бұрын
@@firesmithmanufacturing9376 many many thanks for reply,I made sali,which give yellow tailed, and its very very sensitive for just hand ramming,ur tooling set is world famous,I have a dream thai if were available through amazon in India, I am a fond of pyro,but there are many chemicals u use easily thats are not available in India,so just make myself happy with watching ur video,all day night I dreamt about pyro
@rocketmakingbengal9984
3 жыл бұрын
Please share gmail ,I have some question
@johnanderson186
3 жыл бұрын
NEVER, NEVER, NEVER!! Hand ram WHISTLE FUEL!! You’re playing with Nitro-Glycerin next to a LARGE BONFIRE! Invest in or make a hydraulic press, please for the sake of God.
@seshivalluriseshi61
Жыл бұрын
Hi sir please tell me colour whistle formula
@firesmithmanufacturing9376
Жыл бұрын
Glue a comet of any color to the top of your motor. You'll get a whistle rocket with a tail of any color you like.
@Strobe_rockets_
2 жыл бұрын
What are each composite in grams
@firesmithmanufacturing9376
2 жыл бұрын
Depends on how large a batch you wish to make. The formula is listed as parts by weight, so it can be scaled to whatever size batch you wish to produce at any time.
@alexvids9232
3 жыл бұрын
what about a high quality mask to prevent inhaling poison? and goggles also help.
@firesmithmanufacturing9376
3 жыл бұрын
The vast majority of the chemicals used in pyro aren't poisonous. They are commonly found in many every-day products.
@MrHobj34
3 жыл бұрын
@@firesmithmanufacturing9376 it’s a lot different when inhaled. I’d be wearing a mask, I watched those chemical go air float several times in the video. Guarantee you inhaled some and guarantee you mr health would be better off with a mask.
@MrHobj34
3 жыл бұрын
@@firesmithmanufacturing9376 regardless, you do you, appreciate the quality instructional video none the less, thank you sor
@goodmaro
10 ай бұрын
The dust mask is needed only when handling the dry potassium benzoate. After that, what you really need is to work in open air against the solvent fumes. However, if you're mixing in a closed zip-lock bag, you can do that part indoors, away from ignition sources.
@vh14a
2 жыл бұрын
Why does your radio Come out 101 parts? 64 + 32 +2 = 98 3 parts Vaseline = 101
@firesmithmanufacturing9376
2 жыл бұрын
That's very common in chemistry. Since the formula is simply a ratio of parts in relation to one another and not as a percentage, the total amount of "parts" can often be less than, or greater than, 100.
@MinhNguyen-zn3gf
3 жыл бұрын
Can you give me the recipe for the whistle rocket launcher?
@firesmithmanufacturing9376
3 жыл бұрын
The formula is detailed at the beginning of the video.a PDF tutorial is available at www.firesmithtools.com
@bhavukdhiman8950
Жыл бұрын
@@firesmithmanufacturing9376 hello sir can i make whistle with kno3 Or kclo3
3 parts vaseline dissolved in lacquer thinner to help lubricate the fuel. This desensitizes it and also makes it easier to compress inside the tube.
@minicinnamonpoptart2494
2 жыл бұрын
You got snapchst i got pyro queztions?
@DON_DA_PYRO
2 жыл бұрын
@@minicinnamonpoptart2494 it’s the same username
@bhavukdhiman8950
Жыл бұрын
Hello can someone help me i have only kno3 and kclo3 tell me how can i make whistle
@firesmithmanufacturing9376
Жыл бұрын
Please stick with proven formulae. My experience with chlorates is very poor, so I'm afraid I can't offer much help. Your KNO3, charcoal and sulfur will make great BP motors, though!
@markvickroy6725
2 жыл бұрын
Audio levels....
@bombayjamesgabriel4800
2 жыл бұрын
Those parts u said is grams right?
@mckarthy5771
2 жыл бұрын
Wish I knew as well, people measure differently when saying parts in chemistry?
@mckarthy5771
2 жыл бұрын
"The reference to "parts" in a chemical formulation simply refers to the ratio of one chemical to the others all by weight. Let's say some formula has 3 parts A 2 parts B and 1 part C. In this example, my formulation could contain 300g A, 200g B and 100g C. Or... 900g A, 600g B and 300g C." Directly copied in their reply from the strobe fuel video. This is perfectly understood now.
@bombayjamesgabriel4800
2 жыл бұрын
@@mckarthy5771 thankyou for that wonderfull answer but one last question would it still work if i use potassium chloride, or kn03?
@bombayjamesgabriel4800
2 жыл бұрын
@@mckarthy5771 hey bro pls reply if i can use potassium chloride instead of perchlorate thankyou!
@mckarthy5771
2 жыл бұрын
@@bombayjamesgabriel4800 I'm not a professional in pyrotechnics, but I work at a pharmacy as of right now. As you may know, potassium chlorate is a more potent oxidizer and therefore much stronger for fireworks. I do not know of any comparable compound that could replace it other than what he was using in the video which was potassium perchlorate. Chlorate>Perchlorate in terms of potency, but in turn more dangerous and I'm not sure how that would affect the pressing or anything else, I could probably ask my pharmacist very non-conspicuously.
@oz3bto
Жыл бұрын
If you cant make whistle mix after this ... Just give up
@firesmithmanufacturing9376
Жыл бұрын
Ha ha!... I try to make it as easy as possible
@oz3bto
Жыл бұрын
@@firesmithmanufacturing9376 Well if i can make it anyone can ... But i have som problems with CATO´s .. Maby you can help figure it out ?
@firesmithmanufacturing9376
Жыл бұрын
@@oz3bto There are a few "typical" causes of CATOS. Making sure your fuel and tooling are compatible is important. But, loading pressure and increment sizes are usually the culprits.
@daikin7777
2 жыл бұрын
It's fake...or true??
@firesmithmanufacturing9376
2 жыл бұрын
Not sure I understand your question. This is a demonstration of the production of a very common whistle rocket fuel.
@daikin7777
10 ай бұрын
Ok where is you test when you made engine?
@primadonafishing9713
3 жыл бұрын
Im mk oh los
@23gsxr1k
3 жыл бұрын
80 mesh titanium sponge over the spindle for a bushy tail a little too butt puckering for my liking…. Would rather press TI flake
@firesmithmanufacturing9376
3 жыл бұрын
Flake and sponge both work well. Avoid spherical, though. It's horribly abusive on tools.
@uarbor70
3 жыл бұрын
@@firesmithmanufacturing9376 well there goes my plan
@Quantrills.Raiders
Жыл бұрын
use a better microphone man, audio sucks
@firesmithmanufacturing9376
Жыл бұрын
I agree! When we get the shop updated I'm setting up a permanent studio with better equipment.
@Quantrills.Raiders
Жыл бұрын
@@firesmithmanufacturing9376 dont mind my original comment, i was probably drunk. You guys are doing good stuff
Пікірлер: 102