My honest opinion is that this is a gorgeous box! I love the process
@WoodDoormann
Ай бұрын
@@davidhamrich thank you very much
@mcrawford7117
7 жыл бұрын
Yours is a gem of a KZitem channel. Thanks for a video with no nerve-rattling music or other distractions, just a calm, soothing voice-over and a really beautiful box build. Keep up the good work, sir.
@WoodDoormann
7 жыл бұрын
M Crawford thank you very much
@fred_derf
5 жыл бұрын
I agree fully.
@mab5608
Жыл бұрын
Subscribed! Very nice work. Well described. Beautiful project. Inspiring.
@houndsden
Жыл бұрын
I also like you didn't have annoying and distracting music.
@billmcclay
4 жыл бұрын
I really like that you showed everything clearly and didn't waste a lot of time showing details that weren't important. I like the box design too!
@geoffe427
2 жыл бұрын
I'm late to see this post but I really appreciated your concept, design and commentary. Well done. excellent job.👍👌
@bw162
Жыл бұрын
You are blessed with not only design and woodworking skills but a very refreshing manner of explaining your work. I have a sense I know the source.
@dansmith8550
4 жыл бұрын
Very nice work. Like the fact you included Aluminum in the project.
@raycap
4 жыл бұрын
I like the way you created and finished the box.
@AW139plt
4 жыл бұрын
One of the best instructional video's. There is not one aspect of this video that doesn't pass on knowledge and skills!!! Thanks
@aroldfut
4 жыл бұрын
Excellent tutorial. No distracting music, just straight forward instruction! Great box.
@aroldfut
5 жыл бұрын
The difference between art and basic woodworking. I'm envious. Beautiful creation and excellent tutorial!
@WoodDoormann
5 жыл бұрын
john cooper thank you very much
@woodworker3856
5 жыл бұрын
Great video! Not a lot of people have the guts to show a project online from start to finish like you have. The box is beautiful. You edited the video well, so it goes at a nice pace. Happy to see somebody else who is relentless about masking the wood and and wiping the glue to avoid having to scrape it off later. Bravo!
@mdavies441
6 жыл бұрын
Very nice CNC project!
@Nlackings
7 жыл бұрын
My wife hadn’t felt good, at all, about my CNC purchase about a month ago. Then I purchased Aspire, which made it worse. I am huge into graphic arts and woodworking. Then, I came across this video. I showed it to her. She is finally warming up to the idea. Thanks. Be blessed.
@WoodDoormann
7 жыл бұрын
Nelson Lackings, I’m happy that I was able to assist you. We have a few things in common, outside of your wife having some concerns, i could have written your comment word for word.
@Nlackings
7 жыл бұрын
WoodDoormann we actually have even more in common than you may imagine, considering the makeup of those who more commonly populate this field sir. Thanks for responding.
@davidjennings2733
3 жыл бұрын
Mandell, I am very late to the party but just wanted to say thanks for sharing and excellent job. Very well done sir...
@WoodDoormann
3 жыл бұрын
Thank you very much!
@hurdyg1
Жыл бұрын
I have to say your video showing the construction process is great, The box looks terrific. I just found your site and I joined and will be watching more. Thanks
@WoodDoormann
Жыл бұрын
Thank you
@robertbrann7604
3 жыл бұрын
this was a great find for me. Terrific work and easy explaining without distraction of music and such. Looking forward to more.
@WoodDoormann
3 жыл бұрын
Thank you very much!
@wildtoyou812
5 жыл бұрын
Awesome work. I'm very glad I found your channel.
@WoodDoormann
5 жыл бұрын
jeff dewilde thank you
@tonyk613
6 жыл бұрын
Just finished building my CNC machine and found this gem. Very well done video with great explanation with what you are doing. Great video and thanks for taking the time to share your technique.
@halberttorraca3392
2 жыл бұрын
Great Project Mandell, love the design.
@johntaylor2831
5 жыл бұрын
Awesome work. Glad I found your videos. Very informative without all the soundtracks. Looking forward to more.
@phatroguedragon
2 жыл бұрын
This is a beautifully designed box. Your careful attention to detail during the building process and finish makes this piece stand out above the rest. Thank you for sharing your work and processes brother.
@keithpruitt2204
5 жыл бұрын
Great video! Beautiful box. I hope you make more videos.
@WoodDoormann
5 жыл бұрын
Keith Pruitt thank you very much
@keithpruitt2204
5 жыл бұрын
What is the cutting depth of the 90 degree V-bit you used?
@norm5785
Жыл бұрын
Wonderful box, thank you for sharing your awesome project with us, stay safe happy, warm and healthy, from Henrico County Virginia
@adamgeiger4990
6 жыл бұрын
Very Nice job on your box and your video
@robertdiffin9136
7 жыл бұрын
Elegant design, great hold-down technique and ingenious miter cut method. I appreciate the voice-over method you use for your presentation. Nice job on everything, looking forward to learning more.
@joeadams1236
3 жыл бұрын
I loved the video, nice box and excellent presentation. I like the details you showed in gluing it up.
@rickmccaskill7888
7 жыл бұрын
Love the work on the CNC. Way cool method of making 45 deg joints on CNC. This saves hours cutting and fitting joints. Great job.
@WoodDoormann
7 жыл бұрын
thanks
@curtisaitken7027
Жыл бұрын
I love your process here. Well done video and love the no nonsense and lack of background music.
@erics2670
Жыл бұрын
Very nice box and great tips on how to hold a piece under the CNC. I just started with a CNC, actually two of them and things like this video actual TEACH, not brag. I think there was about 4 things that I will try tomorrow when I'm back in my workshop to fix an issue I was having in my learning process. I look forward to see other videos by you. Also you are the first person I subscribed to for CNC videos.
@seriouslyintolife
6 жыл бұрын
You Sir are a true wood worker that box is absolutely beautiful!!!!!
@WoodDoormann
6 жыл бұрын
Hanging with Tony Thank you very much.
@lonnietheer5702
2 жыл бұрын
Mandell... Very nice work. Thank you for sharing.
@afajalaka
4 жыл бұрын
Cool project. Great attention to detail. Love seeing the mix of CNC and traditional craftsmanship.
@jrjazz
4 жыл бұрын
Nice box with unique details. You gave me a lot of different techniques for things I'm doing differently. Thanks!
@varinatannis4853
5 жыл бұрын
All I can saw is "WOW", you made it look so easy. New to this, so this was well worth it and very much appreciated.
@davidchisholm457
Жыл бұрын
I sure would like to know how you created your continuous lines. This is probably the best designed and creative boxes I have seen yet. The lines, the use of aluminum dowels and VCarved miter joints are genius. Please post more videos, we can learn alot with your innovative techniques.
@konakma
5 жыл бұрын
Like it a lot. Good presentation so many people add some hideous music. Idk if it’s instructions video or crappy music video. Please do more. I’m really new to cnc and trying to learn. This helps. Thank you
@brianbast3836
Жыл бұрын
You inspire Me. I've been wanting to get into box making and You just push started Me . THANK YOU
@timpoll7094
5 жыл бұрын
This is similar to a project I have done with my high school students without the CNC. This video was great in seeing how I can adapt this project for the CNC.
@MrBobbin01
6 жыл бұрын
Very good job. I liked the way you went through everything, simple and short.
@WoodDoormann
6 жыл бұрын
MrBobbin01 Thank you! I hope it helped you on some capacity.
@rewinedmanagement728
6 жыл бұрын
Such a concise video, with a lot of techniques used for various points in the project. Will definitely give this a try.
@WoodDoormann
6 жыл бұрын
Rewined Management Great! Thank you very much.
@JayReidy
4 жыл бұрын
Really liked the line cuts across the surface. Using the 90 degree v-bit to cut the ends is genius! I've been using my chop saw. Your method is much more accurate. Thanks.
@Deepseanomad
3 жыл бұрын
Really elegant design and thanks for taking your time to explain the process. Great job
@danb3665
5 жыл бұрын
Great work turned out awesome!
@RickDeSantis
2 жыл бұрын
Great video! I’m new to the CNC world and I’m always looking for ideas. You work is inspiring, thank you!
@tbmakes4912
6 жыл бұрын
LOVE the contact paper and glue idea!!!! Well done! #KeepMaking
@WoodDoormann
6 жыл бұрын
TBmakes thank you
@johnstoakes7942
4 жыл бұрын
Just found this video. Amazing job. Loved the box. Just ordered a CNC plan on using your idea.
@WoodDoormann
4 жыл бұрын
John Stoakes thank you very much.
@dominicksoldano1532
4 жыл бұрын
Beautiful work Mandell. I just got a CNC and this is both very inspiring and educational. Thanks for sharing.
@hdl4259
2 жыл бұрын
Thanks for the nice video, it a real craftsman work, beautiful design, good job.
@DNHandcrafted
5 жыл бұрын
This is a great build! The finished box turned out beautiful. Some great tips with the indexing pin, or the one about sanding the pins with the grain. I’ve noticed that metal keeps the random pattern more than I’d prefer. Glad my friend pointed me to your video! Subscribed!
@WoodDoormann
5 жыл бұрын
DN Handcrafted thank you very much.
@jimhester2004
6 жыл бұрын
That's a beautiful box, and a great idea to use the shelf paper in the hold down. Thanks!
@WoodDoormann
6 жыл бұрын
Jim Hester thank you
@johntaylor2831
4 жыл бұрын
Phenomenal job on that project! Loved it! Thanks again.
@bradonhymes7233
4 жыл бұрын
Love it. I just learned so much just from this video in itself TY!
@billcooley76
5 жыл бұрын
Nicely done looks great.
@nathanohaynie
6 жыл бұрын
Very nice work! Thanks for sharing!
@WoodDoormann
6 жыл бұрын
Nathan Haynie Thank You
@w4twa
6 жыл бұрын
That is a very classy design, and well crafted. I hope to see more projects from your cnc.
@WoodDoormann
6 жыл бұрын
Paul Rinehart thank you very much.
@rrr92462
2 жыл бұрын
Really slick idea for making a box with the v bit. A single piece of wood guaranteed to have grain flow.
@stanstocker8858
3 жыл бұрын
Very nice mix of technology and hand work. I like how you have developed processes to let you focus on the aesthetic results rather than wallowing in the routine aspects of making wooden objects. So many spend huge amounts of time on sanding away half of the last steps damage or cobbling up fixtures and work-arounds for things like the splines. Your use of masking to protect the surface while flush cutting is great. As others have said, it's also really nice to just hear you describing what and why, rather than the youtube copyright safe trite "music".
@kevintcall
4 жыл бұрын
Excellent work and beautiful box
@terry2346
5 жыл бұрын
Very nice job and attention to the details! Thanks for sharing. Now all I have to do is make my CNC! Working on it. :)
@robertmarley4076
2 жыл бұрын
Very nice piece. I make many of box and that is a keeper. Fine job.
@sitoru
7 жыл бұрын
I've only made a big top for a blanket/toy chest on my cnc, you've inspired me to try and make a box like this also
@creativebobbo
5 жыл бұрын
Nice work both CNC and finished product. Agree about the music. I've bailed on videos because of the music. You just gained another subscriber.
@garypapineau4148
5 жыл бұрын
Very nice work, gave me some new ideas to try
@timholt7153
5 жыл бұрын
Nice project done well!
@TwoBitDesign
7 жыл бұрын
Well done. Certainly some good ideas here. You've definitely taken the idea of the bandsaw box to the 'next level'. I may have to try the glue down idea for clamping. It looks like a good way to hold down without having to oversize you work pieces.
@WoodDoormann
7 жыл бұрын
Thanks Gordon I'm glad I was able to inspire you.
@perezwoodworks562
6 жыл бұрын
This is a super cool design my friend! You gained a follower from this video alone! Time to head over and watch the rest of your videos... great work!
@WoodDoormann
6 жыл бұрын
Perez Woodworks thank you for watching.
@RobertWallace
7 жыл бұрын
Nice video. I'm in the process of finishing my CNC (should have it running this weekend). Looking forward to more CNC videos.
@WoodDoormann
7 жыл бұрын
Robert Wallace thank you. I hope to see some of your projects.
@davidrowe1254
3 жыл бұрын
Love your video and your gentle spirit. Subscribed
@satxsatxsatx
Жыл бұрын
😊 excellent job, some innovations, excellent commentary Subscribed and like. Keep up the good work
@WoodDoormann
Жыл бұрын
Thank you😊
@sarg4913
4 жыл бұрын
Great video, and instruction brother. Like your box design and personification. I've been looking to bring my CNC into more of my box building projects. I hope to see more work from you in the future.
@j.hankinson7803
4 жыл бұрын
Thanks for posting. Very attractive box. You may not know that the indigenous people of the north west coasts of Canada and Alaska were making ‘bent boxes’ with this method from cedar for hundreds if not thousands of years. They were also clever enough to retain a thin outside layer of wood at the corners so that three of the 4 corners were seamless on the outside. Modern woodworkers don’t seem to do this.
@WoodDoormann
4 жыл бұрын
Nice history lesson, thank you for the info and for watching.
@denisebrown4129
10 ай бұрын
Beautiful box and great video. Thank You
@mor8266
5 жыл бұрын
Great work, it appears that you are one of the great resources
@WoodDoormann
5 жыл бұрын
Mor826 thank you very much
@slhasebroock
7 жыл бұрын
Very nice! Inspiring me to make small boxes on my CNC. Have not done that yet. The largest box I made was for Bee Hives! Your voice over was very well done as well. Subscribed and liked!
@WoodDoormann
7 жыл бұрын
Steve Hasebroock thanks for watching. I would like to see your bee hive it sounds cool. I will attempt to make a larger box one day myself😊👍
@patrickdillon1064
7 жыл бұрын
Extremely well done video-will look forward to more
@WoodDoormann
7 жыл бұрын
Patrick Dillon thank you
@BlackKnightArtisans
3 жыл бұрын
Nicely done brother.
@cook6052
2 жыл бұрын
Love your work. You are all-pro!
@Eric-bh6ie
Жыл бұрын
Very nice! Many good tips, sir,
@dr.marcuslashley7266
4 жыл бұрын
Great job. Never used anything but coppee so thanks for the idea!
@CerebralDad
6 жыл бұрын
I really like the contact paper idea and how all 4 sides of the box can be folded like that. great job! nice work! I working on assembling my cnc machine and hope to get started soon. thanks again.
@FMoreiraPT
6 жыл бұрын
Thank you for such a great inspiration. Please keep going on that amazing work, and such great videos!!!
@WoodDoormann
6 жыл бұрын
Fernando Moreira thanks for watching.
@Anchorbuilder
2 жыл бұрын
Nice work! I enjoyed your video.
@Tritium697
3 жыл бұрын
Awesome work!! Greatly inspired by this, going to start working on my design.
@disabledwoodworker
6 жыл бұрын
Love the contact paper idea!
@chweatherl
6 жыл бұрын
Very nice! I love using the Miter-fold joints with the CNC. They're always just right.
@ericguillot6402
Жыл бұрын
I did something similar a couple years ago, except more sides. I tried 6, and 12 sided boxes. I tried to leave a thin skin on the outside of the miter cuts so it could be wrapped up with no visible seams. But to get that to work I should have taken the time to set up a steam chamber or something else to get the wood fibers soft enough to attempt to bend so sharply. I tired hot water that wasn't hot enough and it tore. I believe it can be done with proper setup.
@sbirdranch
6 жыл бұрын
Thanks for the video. I have use the tape and glue method. Never thought of contact paper for larger areas. That is excellent. Might I suggest a follow on video for how you did the CAD/CAM for this. It is the next hurdle once someone such as yourself shares a design that inspires. I am currently making some simple small lidded boxes, just to develop my CNC skills. ~P
@milosrankovic8952
2 жыл бұрын
I really like how you use cnc as much as you can. Also like your hold down system. I would apply masking tape before cutting slots for splines, just to cut some time.
@shawnjones5443
7 жыл бұрын
Outstanding work! Simple and beautiful.
@WoodDoormann
7 жыл бұрын
Thank You
@zigydk
7 жыл бұрын
Excellent work. Lovely to watch.
@WoodDoormann
7 жыл бұрын
Thank You
@GyWO10
Жыл бұрын
Wow, great tutorial of making this beautiful box! Any advice on how to design it in Vectric?
@gonzalezliu86
4 жыл бұрын
great work brother. that is an amazing looking project.
@terryjones8360
5 жыл бұрын
Nice work. I enjoyed it very much.
@krisgr5237
5 жыл бұрын
Wow! Beautiful job! Thank you for explaining and showing your process and including the bit info is really appreciated! Thx :-)
@WoodDoormann
5 жыл бұрын
Thank you very much.
@donfillenworth1721
5 жыл бұрын
I just found your channel. The box is beautiful! Nice instruction. I’m subscribing to see more! Thanks for sharing.
@tankerzuke
6 жыл бұрын
Great job! I love boxes and walnut so good on ya
@jeffruffing2316
6 жыл бұрын
Just saw your AMAZING video. I really like the make up of you're box. I was wondering if you could do a video on the programming of the box. Not the design you put on there, more so of how you did the 45 degree cut on the CNC. I have become a subscriber of your channel, and also hit the bell so I can stay on top of your latest videos.
@richardpogue4959
Жыл бұрын
Very well done beautiful box
@WoodDoormann
Жыл бұрын
I appreciate you. Thank you
@frehleycomet
6 жыл бұрын
Love the idea of the sticky paper. Can you explain the process and what were the dowels at the end for if the paper was working fine. Are the dowels at the end to hold the piece in place too. The box is beautiful.
@WoodDoormann
6 жыл бұрын
Hi frehleycomet The dowel rods are for position indexing when two sided machining. It allows one to flip over a piece of wood on center so that one can machine in the exact position relevant to the other side of the board. Look at the video a second time it will help. Thanks for watching and I hope this helps.
Пікірлер: 297