I think your the only one who cleans ice machines this good 😂 great video hopefully more people will clean better with this knowledge your sharing . I don’t clean ice machines a lot but on occasion I need to as a refrig tech definitely learned somethings to do better myself and enjoy all your videos. Thanks man
@IceMachine411
2 ай бұрын
Thanks for the awesome comment bro. I really appreciate it. I’m glad you’re finding the videos helpful.
@denisjosimar
8 ай бұрын
Youre videos are great. Thank you for your effort and contributions. God bless you
@IceMachine411
8 ай бұрын
I really appreciate your support. Thank you.
@michaelblake908
8 ай бұрын
It's nice when you have room to work around the machine. A lot of times the machine is back in a corner when I go to work on them.
@IceMachine411
8 ай бұрын
You’re so right! Small greasy kitchens are the worst.
@michaelblake908
8 ай бұрын
@@IceMachine411 also the little coffee huts with the under the counter models.
@MinhTran-cq3vo
8 ай бұрын
Pretty in depth video! Thanks!
@IceMachine411
8 ай бұрын
MT hvac!
@shlomoattia7706
2 ай бұрын
thank you ✅ great video.
@IceMachine411
2 ай бұрын
Thank you! And you’re welcome.
@mcjustinenriquez9243
23 күн бұрын
Nice video thank you
@IceMachine411
23 күн бұрын
You’re welcome. Hope it was helpful.
@shameenscott5085
8 ай бұрын
Another valuable detailed video.Thanks!
@IceMachine411
8 ай бұрын
You’re welcome.
@phamscb
2 ай бұрын
thank you
@IceMachine411
2 ай бұрын
You’re welcome
@zekenzy6486
8 ай бұрын
Great Video. Thank you for sharing
@IceMachine411
8 ай бұрын
Thank you!
@alkarim5890
19 күн бұрын
How much should you charge for this cleaning job ?
@IceMachine411
19 күн бұрын
The filter is about $100 and the labor is around 250 ish.
@ilc-nl3yy
4 ай бұрын
I just ordered a Manitowoc IYT0450A-161 and the filter assembly. What size copper is needed from the water supply to the filter assembly and size hose from the assembly to the machine? Also, what size are both ends of the water shut-off valve from the assembly to the machine? Are they all ¼?
@IceMachine411
4 ай бұрын
You’d have to look at the installation manual to know for sure. New machines come with all that information in the box. My guess would be 3/8 water line though.
@ilc-nl3yy
5 ай бұрын
I'm considering buying a Manitowoc IYT0450A-161 Indio to replace my Hoshizaki km-201bah because I need a bigger machine. I only use the ice for my soda and food coolers in my hot dog trailer, so the ice is not used in drinks. I'll use approximately 160 pounds to 210 pounds a day, depending on the weather. Would you reccomend doing a chemical cleaning twice a year and a take apart cleaning once a year for what I use it for? It'll be in my basement, where it's always cool. My Hoshizaki is in the garage so the melted ice goes directly outside with a pipe, but where I'm putting the new one, I'll have to put in a drain pump. The garage also gets hotter during the summer. Would you reccomend a Hoshizaki that's equivalent to the Manitowoc or is the Manitowoc good enough?
@IceMachine411
5 ай бұрын
Manitowoc is a solid brand and probably good for what you need. Cleaning should be done at least every six months but more often as needed. Keeping your machine in a climate controlled environment is definitely the best way to go.
@ilc-nl3yy
5 ай бұрын
@@IceMachine411 Thank you for responding. I would definitely do the chemical flush cleaning every 6 months. Should I also change the filter every 6 months? Should I remove and manually wash those parts ever 6 months, or once a year?
@IceMachine411
4 ай бұрын
May seem like a dumb answer but I’d do it as often as it needs. Ice is food.
@raviyadav8743
8 ай бұрын
Great video
@IceMachine411
8 ай бұрын
Thank you. Hope it helps.
@stevengilber1153
8 ай бұрын
Well Done!
@IceMachine411
8 ай бұрын
🫡
@CapsCup2012
7 ай бұрын
Great video dude. How much do you typically charge for these 6 month cleanings if you don’t mind me asking
@IceMachine411
7 ай бұрын
This was a quoted job. I think it was $250 but I’m not certain. That includes all the cleaners, sanitizers, nitrogen, chlorine tablet, filter and labor.
@JakesRepairService
6 ай бұрын
@@IceMachine411 about how long was the total job?
@bschmuve6025
6 ай бұрын
That green solution was just like any other cleaner right? Mine is clear
@IceMachine411
6 ай бұрын
It’s Nickel safe cleaner. Specific to Manitowoc.
@MariosACandRefrigeration
8 ай бұрын
nice work.
@IceMachine411
8 ай бұрын
Thank you.
@jetko43
5 ай бұрын
I have a indigo Nxt above a soda machine do I Have to remove the unit from the soda machine to clean it
@IceMachine411
5 ай бұрын
No you don’t. You just need to protect the ice from contamination. Unplug the dispenser and cover the ice. If the machine is really dirty you may need to empty the ice from the dispenser.
@jetko43
5 ай бұрын
@@IceMachine411 Thank you so much. Your videos help me a lot
@joseluissosa-kx4nj
6 ай бұрын
Can you pleas tell me the port size fr the hihg and suction side to check. Pressure with manifold...thnks
@IceMachine411
6 ай бұрын
1/4 inch ports are the most common type for what I work on.
@shine-cg9uf
8 ай бұрын
❄️💪🇺🇸👍 ur vids r so helpful thanks
@IceMachine411
8 ай бұрын
💪🛠️ Glad they’re helping!
@mikestevenson1819
8 ай бұрын
Where you get that brush
@IceMachine411
8 ай бұрын
Home Depot if you’re talking about the white one.
@mikestevenson1819
8 ай бұрын
@@IceMachine411 The long one for the pipes
@IceMachine411
8 ай бұрын
Oh that’s from Taylor Freeze but Amazon has them as well.
@johnhenderson4335
8 ай бұрын
Have you done all the manufacturers courses to be a authorised engineer mate?
@IceMachine411
8 ай бұрын
Not all manufacturers have courses. I’m also not an engineer. Just a guy that works on ice machines.
Пікірлер: 59