Had a great time with mantisx support, got quick responses, detailed troubleshooting, and once it was isolated to a device malfunction, a quick replacement. Just got to play with the holster draw analysis today, and I love it (average 1.22 seconds from appendix without a cover garment). Thanks guys!
@dontgivearip
5 жыл бұрын
Which holsters will work with the x10?
@MantisX
4 жыл бұрын
We will soon be offering a holster for Glock pistols. See our website regarding pre-order options. Otherwise, we have not done a lot of testing. However, any holster designed for a light bearing pistol in which the light has dimensions greater than the Mantis may allow the holster to be used with the Mantis; although retention may be non-existent in certain cases and this will limit movement before risk of the pistol falling from the holster becomes an issue. The X3 and X10 is about 2.1" x 1.09" x 0.79". We have tested TLR-1 holsters and they work but are loose. The following should work based on measurements, but have not been tested: APL and APL-C holsters should work X300 should work, but I've not verified the dimensions. Xiphos NTX
@vvatc
3 жыл бұрын
I just bought the Mantis X 10 and a magazine baseplate for my M&P Shield 9mm. The baseplate did not come with instructions but came with an extra plastic piece. Now I'm searching KZitem at 10:00 pm and getting more frustrated by the minute. I can get the baseplate with the rail to slide onto the bottom of the magazine but it doesn't snap & lock into place like the S&W baseplate. I've chased this stoopid magazine spring around the house too many times this evening. I'm going to fix myself a drink and call it a night.
@MantisX
3 жыл бұрын
Hi Bud, please email us at Support@MantisX.com, and we would be happy to link some videos to help you get the adapter installed correctly.
@vvatc
3 жыл бұрын
@@MantisX Please disregard my previous rant. I figured it out. I had the little plastic piece with the two round parts upside-down. At the advice of my wife I just needed “to step away for a little while.”
@MrDwaynePoff
Жыл бұрын
Would've been nice, for the money I spent, for my x10 to have type c instead of outdated micro usb for charging purposes.....
@driftitlikeyouownit
Жыл бұрын
As long as it works and you can train with it stop whining about connection type. Plenty of devices still have old charging systems and work fine. Especially lights and lasers for weapons.
@MrDwaynePoff
Жыл бұрын
@@driftitlikeyouownit 😆 🤣 I mean, rubbing two sticks can start a fire as well... doesn't mean I don't wanna use a lighter.....
@AugustDavinDeepson
2 ай бұрын
@@driftitlikeyouownittell me about it. Amazon sell those little charger converters🥴
@TolgaBahar
5 жыл бұрын
🔥🔥🔥
@donnywillis130
9 ай бұрын
If you dont plan to use the Mantis for bow or shotgun is the x10 still that much better then the x3. I was going to get the x3 only for the fact that i dont use shotgun or bow but am i really missing out if i dont have the x10
@floatwork
8 ай бұрын
you miss the holster draw analysis. otherwise its the same. you have to decide if that is necessary for you
@danielholley4169
7 ай бұрын
@@floatworkwhat about x2 vs X3? Just live fire? Thanks for the help
@JereKrischel
5 жыл бұрын
Just got the X10, wondering what the four rubber pads are for.
@JereKrischel
5 жыл бұрын
Also, trying the holster draw analysis, the app seems stuck on "Holster the firearm" - never progresses past that.
@MantisX
5 жыл бұрын
The four rubber pads are for the barrel clamp adapter (for use on rifle or the pending shotgun app)
@MantisX
5 жыл бұрын
@@JereKrischel Is the gun positioned downward? That will trigger the beginning of it. Just make sure the settings match your mounting location and direction.
@JereKrischel
5 жыл бұрын
@@MantisX Yeah, I've tried positioning the gun down, positioning it up, left, right - still stuck on "Holster the firearm". Doing dry fire with a g19 - other drills work just fine. Using v4.0.3 of the app on an iphone 8 plus.
@MantisX
5 жыл бұрын
@@JereKrischel Reach out to our support team: support@mantisx.com or 630-551-8171 and we'll help you out!
@Sergio10795
5 жыл бұрын
Awe, what a shame...I bought my mantis x just before the new ones got featured :(
@Sergio10795
5 жыл бұрын
@@austinallgaier1022 oh hell yea, that's awesome! I'll definitely be getting the x10 then. It's crazy how much this little device can improve your shooting and save you money
@derosa159
4 жыл бұрын
So, the Mantis X3 and X10 look exactly alike. I'm assuming it's programming and software. I have the X-10, my kid has the X3. What's to keep her from taking mine by accident???
@MantisX
4 жыл бұрын
Good point, they are very similar. The best way to tell them apart is to look at the left and right side of the Mantis. The X10 features slants on either side that help improve aerodynamics. ;) The X3 does not have these slants.
@TreeShark
Ай бұрын
What an wild comment 😂
@hejasverigeee
4 жыл бұрын
Too loud music. Would love to hear what was said.
@jhlewis10
5 жыл бұрын
Just received, mine it will not fit my Gen 3 Glock 19 rail, I am afraid to use force with plastic. Ideas?
@MantisX
5 жыл бұрын
It's tight, but will fit if you line things up perfectly. If you mount it backwards, there is a bit more room that way to slide on more easily.
@jhlewis10
5 жыл бұрын
@@MantisX Backwards works thanks.
@JereKrischel
5 жыл бұрын
Worked for my gen 3 glock 19 rail, but yeah, it needs to be aligned just right. I run it in the forward position no problem.
Пікірлер: 30