Here's how I installed a switch to manually control the basement air circulation fan in my Arctic Fox 992 truck camper.
I used an on/off/on (SPDT) rocker switch along with a new fan and a new vent.
This method can be used with an old style analog thermostat or the new digital thermostat that's factory installed.
The method I describe in this video can be used on newer campers with the digital thermostat, or the earlier models that have the analog thermostat. There's two wiring diagrams at the end of the video.
Another method, which I briefly mention, involves replacing your old "heat only" analog thermostat with a battery operated residential style thermostat. With this method, you can wire the fan switch on the t-stat so it manually controls the fan with the fan "auto/on" switch. This is the method I used on my 2010 811, using this thermostat: amzn.to/3PPWGGe
The original vent was much smaller than the fan, which restricted the airflow. The original fan was noisy, so I replaced it with a quieter fan.
Fan I used: amzn.to/3Wyurhw
Vent I used: amzn.to/3PTeRL3
Rocker Switch: amzn.to/3WFicjd
My new "truck to camper" charging cables: • Truck to RV High Amper...
My Official Amazon Page: www.amazon.com/shop/deltabravo
As an Amazon Associate I earn from qualifying purchases.
The Amazon links above are affiliate links and any purchase you make using them supports my channel at no extra cost to you, and helps fund future motorcycle and camping adventures!
*This channel is for entertainment purposes only. We are not RV or Motorcycle experts and are not making recommendations. We share our opinions and what works for us, but you should do your own research and make your own decisions before undertaking projects described in our videos.
Негізгі бет Тәжірибелік нұсқаулар және стиль Manual Control of the Basement Fan in your Arctic Fox Truck Camper
Пікірлер: 16