Hi, can you help with the O2 sensor wiring? I have swapped mine too. Changed the loom and ECU but now trying to figure out how to wire the O2 sensor.
@comptonpure-gy6pw
2 ай бұрын
Bro im having the same problem did you figure it out?
@Xr666falc
2 жыл бұрын
Did you have to do anything with the auto shifter wires/plugs just finished mine it will crank but not start
@delacytavui8832
2 жыл бұрын
Solid stuff brother👌
@waynenunes6348
2 жыл бұрын
Did you get everything off eBay because I’m having issues finding some stuff
@comptonpure-gy6pw
2 ай бұрын
Bro im doing a swap right now and I notice that the 02 sensor wiring plugs are not on the manual loom.. any help please
@BobbyDeniroX
6 ай бұрын
I need your help. I had my clutch replaced. But my gearstick is Slanted towards the passenger side on my left and when I hit reverse it hits the hand brake now. What is wrong with it please help!
@giovannirameshwar3266
2 жыл бұрын
Hey nice vid bro...what size pipe you recommend for a sweet exhaust sound?
@DaxReihana-RFB
2 жыл бұрын
Hey thanks man! 2.5 inch pipe and a decent size resonator should be sweet bro 👌
@JollyGreenGiant072
5 ай бұрын
How much cost is the parts might just get one manual but never driven a manual
@3four4door59
8 ай бұрын
I haven't seen any videos of the clutch pedal install yet. Is it easy
@hugoguillenparra
2 жыл бұрын
Thanks for the vid, I have just one questions. Did you have any issue because ECU swap since engines are a little different. I mean manual has more aggressive cams and higher compression. Maybe it ran richer? Or did you feel it as an upgrade? Thank you
@emergencyexitonly2710
2 жыл бұрын
yeah that would interest me aswell
@adriandc5
Жыл бұрын
he said he used manual ecu
@emergencyexitonly2710
Жыл бұрын
@@adriandc5 yeah, the question we are asking is, does it run correctly with the manual ECU? The Manual and Auto Engines are slightly different and I would expect them to have different maps on their ecus
@TheLeewi98
Жыл бұрын
Do you guys have any info if the keys will work normally after changing the ECU? Or do you need to empty the manual ECU from the old key info?
@adriandc5
Жыл бұрын
@@TheLeewi98 Don't think any of them are coded?
@imaltz
11 ай бұрын
Hey bro quick question is the rear end of the auto driveshaft the same as the manual ? I know the front end that goes into the tranny is a different length just curious if the rear end are the same
@monilfumigationcleaningser7183
9 ай бұрын
Hey bro, need your advice. My altezza produces alot of heat around the peddle area. The exhaust under the feet
@diondresampson3883
Жыл бұрын
@DaxReihana-RFB where can i get a conversion kit like that for my altezza? Ill like to convert my altezza 3sge to manual
@VinnieMatenga-go6mp
9 ай бұрын
Hay bro have you e a rried to do a burnout on ur car when it was auto an if so is there s traction control button
@daytonagreaves5934
Жыл бұрын
Hey bro quick question,with the auto loom the battery cable that runs to the battery is connected but manual loom is separate cord running from the battery to the back of the alternator I assume?lmk if you can thanks bro🎉
@daytonagreaves5934
Жыл бұрын
Battery*
@DaxReihana-RFB
Жыл бұрын
Hey bro i think the battery cable was part of the engine loom, I can't remember if it was separate sorry. We sold the car last year. What are you having trouble with?
@clov3zz860
2 жыл бұрын
nice car man, i wanna swap my auto is200 so bad
@badbana450
7 ай бұрын
How did you unbolt the torque converter?
@JoyLong
2 жыл бұрын
Where did you get that neo 1 bumper from?
@emergencyexitonly2710
Жыл бұрын
I've been experiencing a weird sound after 6k rpm after my manual swap it sounds like gears but it's definitely not the transmission, has anybody had the same issue
@ryftcode
Жыл бұрын
Might be roller bearings in the gear box going bad.
@khondenjamba1725
Жыл бұрын
Hi, I wish to know the made and specs of the magrims. I like them
@salmanblack787
Жыл бұрын
I own this car now😂
@DaxReihana-RFB
Жыл бұрын
Hey man oh cool bro, yeah the only thing I couldn't plug in was the o2 sensor. The Autos have there's on the engine loom while the Manuals have there's on the body loom. I wanted to get one from a wrecking yard but I couldn't find one 🤦♂️
@ImraanIbm
5 ай бұрын
Hi bro, what's the difference between manuel differentiel and auto differentiel? Can i use auto differentiel on manual gearbox?
@comptonpure-gy6pw
2 ай бұрын
Yeah bro you can run auto diff on a manual. I believe the manual diffs are lsd a01b and auto diffs are open a01a you can check on your vin tag it should say what diff you have
@andy0owns1
2 жыл бұрын
Hey bro, just wondering if the manual starter motor is needed for the swap?
@adriandc5
Жыл бұрын
they the same
@DaxReihana-RFB
Жыл бұрын
Nah bro auto one works!
@chacehui6393
Жыл бұрын
How much did it cost to manual swap?
@DaxReihana-RFB
Жыл бұрын
Hey bro scored the Manual Conversion for $500. It was already removed! But we ended up buying a new clutch kit and got the flywheel skimmed, That costed about $450, Then add on fluids etc.. So about $1000 NZD all up bro! Cheers
@kuro7021
Жыл бұрын
What the names of the transmission
@hamdawgms
2 жыл бұрын
Did you need to change the pilot bearing?
@DaxReihana-RFB
2 жыл бұрын
Hey bro nah man the pilot bearing is in the Flywheel! 🙂
@nathanielgeorge7054
2 жыл бұрын
Man cant wait too manuel swap mine.
@DaxReihana-RFB
2 жыл бұрын
Yeah man lots more fun! 😁😎
@nathanielgeorge7054
2 жыл бұрын
@@DaxReihana-RFB any tips when modifying an altezza i got a lot of plans but just dont know where too start.
@DaxReihana-RFB
2 жыл бұрын
Usually start with Wheels and Height first bro, 18x9 wheels with a 20p offset is pretty good fitment man but there's room for more haha, Be ready to spend up buddy 😁
@nathanielgeorge7054
2 жыл бұрын
@@DaxReihana-RFB thanks man, im ready too spend up large
@cjones97r52
2 жыл бұрын
chur bro, did this pass wof/cert for cutting the chassis? am wanting to do this for my car. cheers
@aizal1468
Жыл бұрын
hey, did you every get around to doing this job? just wondering how much it would cost.
@hestontaylor1280
2 жыл бұрын
Did you have to change the coils ?
@emergencyexitonly2710
Жыл бұрын
No u don't need to
@sylvinschaedle9246
2 жыл бұрын
Hey do you need to change the gauges ?
@sylvinschaedle9246
2 жыл бұрын
Also do you need to replace the drive shaft
@emergencyexitonly2710
Жыл бұрын
Gauges are the same besides the small display on the right Wich shows ur kph in the manual
@migueledgard1200
Жыл бұрын
Yes the automatic and manual gauges are different. Manual has a higher rev limit and also records the speed and rpm differently
@migueledgard1200
Жыл бұрын
Yes u need to change the driveshaft as the automatic driveshaft is either shorter or longer than the manual own due to the length of the gearbox
Пікірлер: 86