You're the first bloke to use terms on my KZitem fest of tyre machine use. Such as the well of the rim. And to manually press the bead into the well. Must be an Aussie thing and bloody good on ya. All the Americans only do soft old two ply car tyres. You made it look as easy as it should be when everything's in the right position too. Of course. I'm going to be welding a bit more spoon onto my tyre removing tip having seen your example. These 4X4 tyres are too precious to be damaging by doing the job wrong. Thanks very much for your help.
@carloslopes7763
Жыл бұрын
O melhor vídeo que já vi simples e objetivo, Deus abençoe a todos.
@michaelraymount4108
4 жыл бұрын
Luv the start and end at the valve advice, I see plenty of instances where this does not occur. Twelve years in the business has me offering the little piece of advice of NOT leaving the plastic on a tube patch when reinstalling. I have seen many times where this little item can actually cause a later puncture by etching the tube to the point of it leaking ... thanks for the video.
@eloymartinezperez3702
2 жыл бұрын
N ni
@albertov7431
2 жыл бұрын
EXELENTEEE!!!! Gracias señor por este genial invento. Estoy por iniciar un emprendimiento en el que incluyo servicio de gomería y ya copié el modelo de este aparato. UN GENIO!!!!
@richardhaen
2 жыл бұрын
Very good video, I have had my trier changer for about 25 years now. I have had to do some work on it over the years but it is A money saver as u said.
@alanhughes1262
8 жыл бұрын
i will make this to bolt on to my 110 landrover i had tyrepliers sold them by mistake i like the idea of standing up .
@oldgeeser
4 жыл бұрын
Great video , thanks from Canada
@OverlandTT
8 жыл бұрын
Nice Demo and a better made unit than the ones you see for sale.
Great video mate. Very descriptive and well editted.
@nasemnasem4004
3 жыл бұрын
Rrzddrrrzzxxka
@misbahmisbah7186
2 жыл бұрын
Di mana kita bisa pesan alat tersebut
@luisjaranavalon5190
8 ай бұрын
Saludos cordiales colega.
@aleksa_natanke
2 жыл бұрын
Спасибо чувак! Очень понятно всё показал! +
@derekbond3512
2 жыл бұрын
Very good tutorial you explained everything spot on.
@joefalcon870
Жыл бұрын
excellent video. you refer to it as the well, most videos they don't realize or forget to mention this important fact. well done thanks
@banistimewakampasfullrange
Жыл бұрын
Keren Mr,membuka ban tanpa ngos-ngosan, Mantab
@luisjaranavalon5190
8 ай бұрын
Saludos cordiales mi colega.
@osvandoignacio8784
7 ай бұрын
Bom de mais ideia genial gostei
@robtait3401
2 жыл бұрын
Excellent video. Thanks a million. Very descriptive
@luisjaranavalon5190
8 ай бұрын
Saludos cordiales desde Chile.
@dannychiguina3962
Жыл бұрын
Awesome build guys
@dannylinc6247
3 жыл бұрын
You partly inflate and then deflate the tube to get it to take shape before putting the upper bead on. They even make a tube deflation accessory that uses shop air for saving time. Where I worked, in those days, the boss would make me pay out of pocket if a tube was damaged from not doing all this. That made sure we learned and didn't do our own thing creating damage.
@halleffect1
Жыл бұрын
baby powder makes the tube cooperate
@marcsobas7718
Жыл бұрын
Great description! Thank You very much!
@guesswhomartin9249
4 жыл бұрын
Wow,,, very nice. You make this look so easy. I wonder if it's really as easy as you make it look. Either way, I don't have that machine looking tool. And if I had one, how often would I use it ? Almost never. I'm not a tire replacement shop. But I love your video. Very good.
@MotoGeek
5 жыл бұрын
Nice job! Greetings
@Hennessey_and_smoke
3 жыл бұрын
Excellent tool.. Great upload.
@screwsnutsandbolts
5 жыл бұрын
Great video, thanks 👍🏻
@xhumeka
13 жыл бұрын
Great video mate - thanks for sharing. What are you using to lubricate the tire?
@halleffect1
Жыл бұрын
Ru-Glyde
@Artemiy_A
Жыл бұрын
Отличный станок!!!. Я буду делать станок.👍👍👍
@osvandoignacio8784
8 ай бұрын
Essa bancada e melhor fica bem prática pra trabalhar eu gostei , rio de j
@fookutube501
Жыл бұрын
Im so downloading..Thank you so much for this..
@generalshaba8066
Жыл бұрын
The best repair ever thimbs up
@WASYANIN
10 жыл бұрын
изготовил себе такой же работает отлично!
@nikiprox
10 жыл бұрын
Эскизик случайно не завалялся с приблизительными размерами ?
@WASYANIN
10 жыл бұрын
все и всегда делаю без чертежей (семь раз приварил-восемь раз отрезал!)
@robertfranklin7040
8 жыл бұрын
Note the use of a SQUARE bar to fashion the tire working tool. Keeps the tool from turning in your hand while you're trying remove/install the bead - a MAJOR time & labor saver. Probably the best feature of this manual changer & it isn't even mentioned. Love the design.
@weads1000
7 жыл бұрын
Doesn't matter if it's square or round if you're doing it right. It can't spin in your hands when the end of the tool is in the bead...
@sergeygrevtsov2147
5 ай бұрын
@@weads1000@ем
@user-is4xc9hh6w
2 жыл бұрын
الله ينور يا باشمهندس
@LinnTractorNut
12 жыл бұрын
Like this much better than the Harbor Freight version (which I bent the upright post and the tool after only doing about 150 tires, mostly 13-14 inch size), the J-hook on the end for removing the tire looks like a far better design as well.
@segundosantibanez8278
4 жыл бұрын
Se ve cuando saca un pedazo de caucho del talon
@thai.tv.you.
2 жыл бұрын
Thank you for the tire remover.
@maxmiser286
8 жыл бұрын
He made it look so easy.
@videoworks7731
9 жыл бұрын
good vid thanks
@antonioclarildo4608
3 жыл бұрын
excelente maneira de tirar o pneu, ele usou o remendo a frio na câmera de ar do jeito que eu tambem uso, só que tem borracheiro que fala que deixando o plastico do remendo, o serviço não presta..
@hectorcalderon3011
4 жыл бұрын
I would like to buy one please include a link
@amanumunae7304
5 жыл бұрын
Nice my best brather thanks very nice good job
@chevyvictor
3 жыл бұрын
Great video nice accent Lol. Hi from NZ
@dodznb238
3 жыл бұрын
Very nice idea...i like this video so much. 💛💯👌👍👍👍
@htcculunbia4116
3 жыл бұрын
Saludos desde panama good
@smitherszx7
10 жыл бұрын
Taught me alot bud , good vid
@allanthemsmobilediscokarao3548
4 жыл бұрын
Love it!
@johnharrington2831
6 жыл бұрын
how about breaking the bead ? ? ?
@poojad5433
2 жыл бұрын
Very Good idea sir from India Karnataka
@rabia413
13 жыл бұрын
@dirrtymurph put black tape on the bar it prevents scratching the rim
@homeistheearth
10 жыл бұрын
Very informative. Looks very easy
@ROVITTv
3 жыл бұрын
Great video
@LOPEZdJUNGLIST
11 жыл бұрын
howd you put it back on ?
@sprogbog1197
2 жыл бұрын
Great for changing the tire. How do you do the balancing?
@angelotran8849
2 жыл бұрын
Bring it to a tire shop .
@ridgerunner106
Жыл бұрын
I have a bubble balancer. Though I never balance my own.
@abelavila6219
4 жыл бұрын
Muy bueno gracias
@MrPandan5
11 жыл бұрын
thanks, very helpful. Can I ask what lubricant that is youre applying. is it petroleum jelly?
@ridgerunner106
Жыл бұрын
No it's a special glycerin soap. It's really old timey soap. The soap was a game changer for me. You can mix some with water and make it watery. Use some on the beads. It is about the consistency of grease, but it is soap.
@aleksusnemo4284
9 ай бұрын
все самое гениальное - простое! лайк
@mardyjeh
10 жыл бұрын
good tools sir, i'm a new welder & start a vulcanizing shop last year, i'll copy this tools
@Tyrepliers
14 жыл бұрын
@dirrtymurph Used correctly shouldn't damage the rim. Some customers use a Finger off leather glove for add protection
@user-xs1gm4jf1f
4 жыл бұрын
Спасибо. Монтажка двух сторонняя класс.
@opl1max
9 жыл бұрын
Excellent, practico y cortito al pie. muy bueno..
@wedepeixmen
3 жыл бұрын
the real frustration starts when the tyre has some years... they get really solid to take dem out
@xavierjasway2782
4 жыл бұрын
Cooooool video faster then tire machine 1oo thumbs up
@pointge9069
5 жыл бұрын
this is the best ! Yes !!!
@bboro3326
5 жыл бұрын
How u made that tool where u put the tire can u please tell me
@ernestoruiz8815
2 жыл бұрын
This video it's Great very simple to learn
@shico7320
11 жыл бұрын
manual tyre changer es muy buena la tecnica que has empleado mi gusta.
@Lowcaburakow
5 жыл бұрын
can you balance too?
@fishermanjoe2612
3 жыл бұрын
where can i find that mount bar at?
@Tyrepliers
13 жыл бұрын
@JUDGERAMBO we also have a Manual Bead Breaker which can be seen in our other videos
@jackbuquestac8510
4 жыл бұрын
super idée cela fonctionne très bien félicitation
@oscardiaz4745
9 жыл бұрын
I like the vedio
@garysmart1
8 жыл бұрын
whats the advantege of using donot tire beside air leak
@benjohnson3700
10 жыл бұрын
how do you break the bead with the home made tire changer?
@248945077
6 жыл бұрын
Just drive up on the tire to break the bead.
@bratwurstmaxxehaxxe5315
5 жыл бұрын
or a vacuumsucker
@ridgerunner106
Жыл бұрын
If you have a hard one, lay a board on it and drive on the board. Can use a bumper jack or hi lift jack also if you have one.
@iskandarbujang4955
3 жыл бұрын
The best...👍👍👍👍
@turtlezed
11 жыл бұрын
great vid mate.... :¬)
@durgeshkutrahe531
3 жыл бұрын
9755235903
@durgeshkutrahe531
3 жыл бұрын
Call back
@durgeshkutrahe531
3 жыл бұрын
Call back
@nazdasdaas2778
9 жыл бұрын
Tq for sharing
@arischannel9232
11 ай бұрын
Good job👏👏😍👍👍
@Tyrepliers
13 жыл бұрын
@rogerscottburchett1 If used properly It will not scratch the rim
@radhsakrishnannair8003
6 жыл бұрын
can u mount or demount a runflat tyre?
@ishorgm1741
3 жыл бұрын
Very good idea sir
@danilocanonsosa3537
3 жыл бұрын
Good jod sir👍👍
@ReodorF1
Жыл бұрын
music sounds like the beginning of a tv drama from the 90s
@MadSmokerBBQ
11 жыл бұрын
If word gets out you will have a lot of friends that need tire changes.
@JahanZeb1976
9 жыл бұрын
Awesome video and tutorial dear mate. I will create one machine for my tire repair work. Regards,
@2wheeleddemon745
7 жыл бұрын
LearningZone Build it yet?
@SalmanKhan-rt3cs
3 жыл бұрын
Tell me is the chemical name used
@joseph5304
11 ай бұрын
how did he break the bead
@oscar16146
11 жыл бұрын
How do you break the bead?
@ilakdass2482
6 жыл бұрын
is very nice I like this
@thai.tv.you.
2 жыл бұрын
It is a labor-saving machine for removing tires at an affordable price.
@sahmadi1000
8 жыл бұрын
What is the Lube?
@frankderuiter811
8 жыл бұрын
+sahmadi1000 soap
@AkramKhan-vq3ds
6 жыл бұрын
sahmadi1000 a little amount of dish washer liquid and water mixture is enough lubricant
@MadSmokerBBQ
11 жыл бұрын
For $10 the kid at the shop will be happy to gouge your pricey rims while you wait. I change my own, save the money and time and pretty rims. Just use rim protectors cut from an old laundry detergent bottle. No scratches. Job is done right by ME.
@hhelmejor5485
5 жыл бұрын
you ought post a video on how and what u use, thanks a lot!
@hectora.g1831
7 жыл бұрын
Que buen trabajo.
@stevemichigan541
6 жыл бұрын
Old tire man in country Recaped tires. He would not use a air powered one. Said they ruined the bead. If he still alive he would be over 100. Year's old. This was 30 years ago
@jpatt1000
11 жыл бұрын
Do you have a center post that will lock on to center lock wire wheels?
@johnfarmer4099
4 жыл бұрын
Much easier than the tool with the arm attached that I used to have to use. But I will be really impressed if he can dynamically balance the tire with that tool
Пікірлер: 239