In this first episode, I show you the making of a double oak front door. You will discover the stages of this artisanal production from the flow to the gluing of the doors.
EPISODE 1
1 / I make with DKD plaice
2 / the wood flow
3 / the planing
4 / planing
5 / cutting the wood to length with a format saw.
6 / Tracing with a cutter as a scribe
7 / Establishment of pieces of wood
8 / Assemblies with XL dominoes
9 / counter-profile with a tenoning router
10 / pointing the top
11 / Profiling / routing with a router
12 / fretwork / roughing of the curved sleepers with a band saw
13 / Gluing dominoes with d4 pu exterior glue
14 / machining / an all-rounder and 1 bearing to calibrate a hanger with a router
15 / machining / groove stopped with the router
16 / squaring of the grooves stopped with a chisel and router
17 / I drill holes to evacuate the water at the bottom of the groove and rebate
18 / gluing the doors with pu glue
I will meet you in episode 2 for the end of the machining, the installation of the glazing with the guardrails, the installation of the hardware, the insertion of the seal, and the finish.
Hope you like the end result.
Jean-Vianney Poy, I am Cabinetmaker and KZitemr. My workshop is in the heart of the Burgundy wine coast.(france)
You will find on my channel pro and personal projects, films on my equipment, my workshop and all my tips.
Subscription by clicking on the link below:
kzitem.info/rock/utQ ...
I am present on the following social networks:
/ jvpoy
https: //instagram.com/atelier.jv ....
Негізгі бет Ғылым және технология MANUFACTURE OF OAK ENTRY DOORS / PROFILE AND COUNTER PROFILE / CURVED WOOD MACHINING (EPISODE1)
Пікірлер: 68