Muchas gracias por su vídeo Seguí el mismo paso y q bien mi Carro HHR LT 2007
@evarocha9376
2 жыл бұрын
Que fallas hacia su carro por el sensor ?
@SharkNewGeneration
Жыл бұрын
like, porque eres el unico que he visto que enseña el motor de tostadora, 2.2 el mismo del Cobalt Gracias señora, espero y el 2.4 sea el mismo nose si el HHR lo tenga
@user-wf6ks1pf5g
9 ай бұрын
Yo lo tengo el el hhr 2010 2.4 good truck
@HEADBANGRR
4 жыл бұрын
VERY cool. Thumbs up just for playing some Ozzy!
@ricardovillanueva1051
Жыл бұрын
After replacing the senor with a new one do you have reset the system or does it reset it's selfe(check ingen light)?
@tomgreenwood2132
6 жыл бұрын
I like not having to listen to some blowhard talk about himself and ramble about his project for the first 5 minutes of the video punishing me while I wait to get that gem of knowledge I'm looking for, if I ever do.
@1975Adamd
2 жыл бұрын
I have the same car, ever get a U0073 code? Any idea how to fix that code?
@paulcasarez404
3 жыл бұрын
Was this for low tire pressure or something else like no crank start or rough idle low engine power
@badmatt4227
3 жыл бұрын
I moved from elevation of 200 feet to 4,400 feet. While at the higher elevation the car felt like I was towing a trailer. Thus most likely cause was the MAP.
@aerodriguez1254
3 жыл бұрын
My ACDelco sensor, 213-4681, does not have an Orange nipple. Do I need to buy gm 16194007 sensor seal (orange) to go with it?
@badmatt4227
3 жыл бұрын
If the product does not come a with a seal. Maybe use the old seal.
@parkinglotpatty2911
6 жыл бұрын
It's okay to talk and say what you are doing during a tutorial. lol.
@mikesimonian990
5 жыл бұрын
Jamie Hershey I wonder if Ozzy ever had to work on a car.
@05232000
3 жыл бұрын
Hi. I can’t locate the camshaft position sensor on my hhr looks is the same at the you worked. Can you please tell me we’re can I found it?
@badmatt4227
3 жыл бұрын
Camshaft Position (CMP) Sensor is located behind the head on the intake side.
@RadMan42069
4 жыл бұрын
What was the T30 used for?
@badmatt4227
3 жыл бұрын
0:48
@franciscoochoa4294
4 жыл бұрын
Where it's the sensor for power sterling ?
@badmatt4227
3 жыл бұрын
If the power steering goes bad. It is either the Electric Motor and Control Module. Both are inside the vehicle under the steering wheel and most likely the problem will be the Electric Motor.
@adamray3866
5 жыл бұрын
Where is the map sensor hose on their
@badmatt4227
5 жыл бұрын
There is no hose.
@ellocojjjjmadness3756
3 жыл бұрын
Why you didn’t clean the throttle body?
@badmatt4227
3 жыл бұрын
Working on a car in an apartment parking lot is a timed event. please click here kzitem.info/news/bejne/w3yPuqVjoX2eiG0
@juanitoperez7508
6 жыл бұрын
What was the fault?
@badmatt4227
6 жыл бұрын
The vehicle felt like I was towing a trailer, I also moved from an elevation of 200' to 4,400'.
@danielvalderaz5069
6 жыл бұрын
Este camarada es mudo
@kitcarson9047
5 жыл бұрын
there is something not letting this video load goes to picture of tools then stops..tried it like 10 times...same place everytime ....
@badmatt4227
3 жыл бұрын
I have no idea why.
@richiedee6872
3 жыл бұрын
What was the part number
@badmatt4227
3 жыл бұрын
Sorry, I do not remember.
@JCAFloresboyswantsmoke
3 жыл бұрын
So wtf did it fix?
@badmatt4227
3 жыл бұрын
My car felt like I was towing a trailer. Like the engine could not breathe. During this time, I moved from a location with the Elevation of 200 feet to a location with an elevation of 4,528 feet.
@gregmcdonald6851
5 жыл бұрын
You change something, but I'm not that was the MAF sensor. It was in the housing you took off and is always located between the airbox and the throttle body so that it can read the air going into the throttle body.
@Austinadcock
5 жыл бұрын
Greg Mcdonald it’s a MAP sensor not MAF
@gregmcdonald6851
4 жыл бұрын
My bad, misread
@Casanovafff
3 жыл бұрын
What was the code
@badmatt4227
3 жыл бұрын
When this occurred, I moved from and elevation of 200 feet to 3,000 feet. My car felt like it was towing a trailer. I decided to start with changing MAP sensor which resolved the issue. I just did a quick internet search and found codes P0106 and P0107. Most auto parts stores will check cars with a code reader for free.
@REALSTEELJOE
4 жыл бұрын
Hello, ¿Do you think, that failure, can make the car burn more gas, than the normal?
@2wheeladdict12
3 жыл бұрын
Yes it can. It tells the car how much gass to put into the air/fuel mixture. By determining how much oxygen its getting.
@mariaccampos3860
6 жыл бұрын
Censor de las llantas
@badmatt4227
3 жыл бұрын
MAP: Manifold Absolute Pressure MAF: Mass Air Flow
@franciscorivera2777
2 жыл бұрын
Que fallas produce el censor
@franciscorivera2777
2 жыл бұрын
Cual fallas
@badmatt4227
2 жыл бұрын
@@franciscorivera2777 I replaced the sensor because the car was running poorly. possible codes between P0100 to P0109.
@SportsMusicCars
Жыл бұрын
lol we have a 2008 hhr and I post vids on this all the time lol!! did the canister evap vid and am doing the front tie rod and brakes vids tomorrow. subbed! let's grow!
@badmatt4227
5 жыл бұрын
ricksfreeautorepairadvice.com/p0106-map-sensor/
@robertclifton5795
3 жыл бұрын
Try explaining next time .....
@badmatt4227
3 жыл бұрын
I am working on this for my next video.
@Astralpilot2.0
4 жыл бұрын
What are the symptoms of it being bad and what does it do
@badmatt4227
3 жыл бұрын
My car felt like I was towing a trailer. Like the engine could not breathe. During this time, I moved from a location with the Elevation of 200 feet to a location with an elevation of 4,528 feet.
@SportsMusicCars
Жыл бұрын
@@badmatt4227 MAP = Mainfold Absolute Pressure, so yes, this will be the symptom.
Пікірлер: 53