excellent content, I looked for everything on how to install the original fysetc e4 firmware and your information was the most relevant to trying to solve my problem. very good👍
@EdwardBraiman
6 ай бұрын
Thanks.
@marcosaldrovandi9000
Жыл бұрын
It's the best tutorial I've seen so far, really great.
@EdwardBraiman
Жыл бұрын
Thanks.
@robertwilson5532
3 ай бұрын
This is how you teach - perfect!
@EdwardBraiman
3 ай бұрын
Thanks.
@jansensouza4180
10 ай бұрын
thanks for you explanation, very educational. I will be following you...
@EdwardBraiman
10 ай бұрын
Thanks.
@kiahalhay1163
10 ай бұрын
extremely useful tutorial. Thanks
@EdwardBraiman
10 ай бұрын
You're welcome.
@EXG21
Жыл бұрын
A major thing to consider also is how your screen, I have a BTT TFT E3 V3.0, and I didn't realize for a long time until trying to print higher temp filaments recently that the screen firmware also has max values for temperature safety and you need to modify the .ini file when updating the screen firmware. I was upgrading the temp in Marlin but my screen only raised it to 275, but in Marlin mode, it would raise to above it, that's when I realized. Hope this helps someone with an issue. Ha ha.
@EdwardBraiman
Жыл бұрын
Good point, but let's remember we can only pack so much information into a video. The point in this video was learning to install and setup build environment. I'll be doing some updated TFT display videos in the future.
@Gix3D
Жыл бұрын
Ahhhh.... When ive got VSC open im constantly getting pop ups that ruin the play time. Im talking every 10seconds or so and also the c++ errors when VSC starts up. Confuses the hell out of me as i didnt know what was wrong but hopefully now i do. I just hit install x64 and then added the Platformio, marlin, and C++ in VSC but it never seems to jell. Me now thinks time to uninstall and do it all properly.. You Sir may have wisened me up to the next level (which there seems to be so many). It was getting seriously depressing failing everytime. THANK YOU.
@sergeantseven4240
Жыл бұрын
I miss the days of working within the Arduino IDE directly and just clicking upload.... I feel like the docker/VScode/linux dev container BS is so overly complicated. I have not been able to get the dependencies to all install without errors in VScode.
@krazzykiller1
9 ай бұрын
great tutorial. I'll have to watch it a few more times. vs code is freaking weird.
@EdwardBraiman
9 ай бұрын
Actually vscode once you get used to it is very good.
@HakkiOgrt
6 ай бұрын
Thank you.
@muskateer10
5 ай бұрын
So if you have 2 different boards. Say a SKR 1.4 and an SKR 2.0. How do you prevent VS Code from overwriting your config files? Each board is on different printers with different features. I would not want to overwrite either the config.h or the config_adv.h files because they are needed in the future. Thanks very good video.
@EdwardBraiman
5 ай бұрын
Normally store files in folders on the computer or build them again or store them on SD card in SD drive slot on motherboard.
@muskateer10
5 ай бұрын
@@EdwardBraiman So would I need a second folder for SKR 1.4 then make another copy of Marlin and put it in the SKR 1.4 folder? That is where I am confused. If I modify the config files for SKR 2.0 in Platform IO. Currently I lose the changes in the config for the SKR 1.4 board. There are like 20 differences between the files ....I don't want to keep typing it in.
@EdwardBraiman
5 ай бұрын
@muskateer10 the outpost of the build goes to .pio folder in vscode.
@billychampy316
9 ай бұрын
Great video
@EdwardBraiman
9 ай бұрын
Thanks.
@hughdidit
Жыл бұрын
Not connecting to the COM port in Windows 10.
@rashidrashad2075
8 ай бұрын
Great video thank you. What about arduino mega2560 adk
@EdwardBraiman
8 ай бұрын
Mega2560 is a MCU for RAMPs and other boards. Not sure I understand question. There's a Discord link in Description.
@regomag8801
Жыл бұрын
Nice video Ed.. I built my corexy 300 x 300 x 300 printer with a bigtree tech skr 1.3 board what configuration do think I should use .. it’s a home built machine from parts I acquired myself mate… cheers from Australia..
@EdwardBraiman
Жыл бұрын
SKR 1.4 is similar, but depends on MCU.
@combokings8346
Жыл бұрын
thank you
@EdwardBraiman
Жыл бұрын
You're welcome.
@LegitLeeVelez
Жыл бұрын
hey ed I was wondering if you could make a video on how to do this on the skr pro v1.0 like you did before but an new updated video on how to do this thank you for your videos
@EdwardBraiman
Жыл бұрын
Already have a playlist for SKR pro 1.x. only new step would be ini folder for environment.
@LegitLeeVelez
Жыл бұрын
@@EdwardBraiman I know I have watched it all over and you did say that there is a new way to do it something about a updated way?
@RicardoBHubner
Жыл бұрын
Amigo, Obrigado pelo seu tempo em ajudar nós leigos, estava vendo o esquema eletrico da skr2. queria colocar um esp32 hm-et- live que tem sobrado aqui , com jumpers, para usar o wifi. (sem ser aquele modo comprado). por acaso ja tentou usar?
@EdwardBraiman
Жыл бұрын
O Esp32 está no ar WiFI. Minha preferência é Raspberry Pi 3/4 ou Parpberry Pi Zero 2 W para melhores resultados e gravação de vídeo impresso.
@waltersoapjack6123
10 ай бұрын
Question. I have an Lk5 pro but would like to replace the motherboard and touchscreen with an ender 3 max motherboard/touchscreen. If I utilize Marlin, can I make this work, or are the two systems incompatible? Please advise, and thank you in advance.
@EdwardBraiman
9 ай бұрын
I'd need more detail on the hardware, if you enter Chat for Discord either myself or someone else can help in General Chat.
@noanyobiseniss7462
Жыл бұрын
For the algo.
@davemorales1064
Жыл бұрын
Should not have included the extras
@pensiveboogie
6 ай бұрын
I'm hoping you will read this and give me some assistance please. I have spent, on and off, two days trying to compile my own Marlin firmware but on every attempt, I'm stymied by PlatformIO. It just won't install and I see very lengthy error messages full of incomprehensible jargon I can't cope with. It seems it needs configurations from Python, so one error message demanded that I install Python, which I did but it made no difference. I have watched your well presented KZitem video on this, and a few others, too. In no case are any of you experiencing PlatformIO errors. I would love it if someone would help me crack this infernal block by PlatformIO. Thanks
@EdwardBraiman
6 ай бұрын
There's a Discord link in the description of video, either myself or someone else can help in General chat.
@Ojref1
Жыл бұрын
It cannot be stressed how vital this kind of educational presentation is, especially to first-timers who are holding a BTT board with a terse little card in point 4 font and going WTF. A lot of us have been there. Thank you very much.
@EdwardBraiman
Жыл бұрын
You're Welcome.
@Gix3D
Жыл бұрын
Yep, I have a Mini e3v3 and a Manta m8p ive shelved due to not being told how to sort this properly. Then i went out and brought MKS boards im having the same nightmares with. At the moment ive got two Ender5plus's doing jack because im to dumb to sort it out. But now, With a little luck... Happydays.
@MOTOSTAN
Жыл бұрын
and from now on you will be redoing it every single time there is new update. just from that reason KLIPPER user here
@EdwardBraiman
Жыл бұрын
Usually when Marlin firmware update changes a process I update a video. So I'm making a playlist for Marlin and VScode to point people to. As for Klipper, I'm still working on it, but need to get answers from manufacturer on hw for some stuff.
@jimmym2719
7 ай бұрын
Thanks for sharing & all the knowledge and work put into this video❤
@EdwardBraiman
7 ай бұрын
Thanks. Working on a new series to get people interested in a budget. Only recorded a few videos, but in coming weeks it's going to get interesting.
@jimmym2719
7 ай бұрын
@@EdwardBraiman yeah, keep up the good work. I like your videos👍.
@teriyakipuppy
8 ай бұрын
This is invaluable. Gold in the shape of a video. Thank you thank you thank you!
Пікірлер: 52