Wow that's some useful info. I wish I knew about this before because I've just been replacing neck joints with magnets which limit the possibility. Thank you for this tip.
@zeswa00x
4 ай бұрын
Man this video aged amazingly it just helped me fix my sons miles Spider-Man thanks man!!!
@donpettyandthespacefakers1798
2 жыл бұрын
Thank you my son was unbelievably upset he broke that joint but thanks to you everything will be all good 👍
@MSFT81
2 жыл бұрын
Awsome video! Fixed my kids spiderman in 5min..he was psyched..thank you 👍
@wucash
Жыл бұрын
Great movie. I just broke neck peg. I did everything step by step just like you did. Its Fixed , looks like New. Thanks man!
@TheOriginal
4 жыл бұрын
Great video bro! Any advice on how to reinsert the neck circle peg into the neck grove (vice)? Thank you
@manuelmonarrez359
9 ай бұрын
Excuse the language but you're the fucking best thanks a bunch dude 🍻🥃
@squidy968
8 ай бұрын
My ironheart broke in her torso and I’m hoping this will fix it since I’ve already tried gluing it back together and it broke off
@kairus1
6 жыл бұрын
thats a good trick thanks brock
@FDNProductions
2 жыл бұрын
I have this neck-breaking problem with my Upgraded Suit Spider-Man. The ball on the figure i massive and made for the unmasked head. But the masked head has a smaller connection making using the head very irritating. It doesn’t help that the plastic the necks made out of is very soft. And my figures neck as broken at the front. I’ll try this method someday, once I can get the tools needed to do so
@benjaminrspaulding
9 ай бұрын
Can you still swap heads when its done
@imm311
3 жыл бұрын
This came in handy! Thanks! God bless!
@LifewithBrock
3 жыл бұрын
👊🏻
@Pacowhitebeard
2 жыл бұрын
What tool did you use to cut that screw head?
@LifewithBrock
2 жыл бұрын
A plier with a sharp edge or I used my dremmel.
@mamawampipti9985
6 жыл бұрын
How about making a video about broken arm peg
@LifewithBrock
6 жыл бұрын
Evan Darrel Cayetano i will next time i get that issue.
@masculinemindset6509
6 жыл бұрын
Brock you the man for this one. I customize figs myself and im not sure if i would have thought of this. Good job bro.
@FroggyGeezer
6 жыл бұрын
Great tip Brock! Thanks for sharing it.
@rickytoddbotelho9555
6 жыл бұрын
Great. Just did the same thing for a custom.
@chrism_boxing
2 жыл бұрын
That is exactly how my figure broke,but i dont have the materials to fix it😔 I need another tip
@zoulblade
2 жыл бұрын
Que podría hacer si se rompe el anillo de abajo me pasó y ahora cada vez que le cambio la cabeza tiene cabeza intercambiables se viene el anillo
@nobleneymar
9 ай бұрын
THANK YOU SP MICH FOR THIS TUTORIAL!!!! MY AMAZING FANTASY SPIDER-MAN BROKE AND I JUST GIXED HIM!!!!!
@healydowbiggin7871
6 ай бұрын
I have this but it’s the ball join neck peg 😢 would you be able to do a video on that?
@klanibal
6 жыл бұрын
Very very useful VDO thank you
@LifewithBrock
6 жыл бұрын
You are welcome
@juliasebastiani8364
2 жыл бұрын
Thanks a lot
@prestonkanoa8114
5 жыл бұрын
Thanks brock!!! That was super cool!! I used magnets before but this is better!!
@glorytoyourhouse3344
5 жыл бұрын
what about foot peg? ;/
@rynohobbies
5 жыл бұрын
Thank you for making this, I just broke the neck of Emperor Palpatine with my force pull. I’m not going to buy another one. I tried fixing it but I think it’s beyond using this approach. I’ll try it. If it doesn’t work, I’ll have to buy a cheap figure and use that neck. Great info, though.
@LifewithBrock
5 жыл бұрын
Man that stinks. Sometimes it’s just better to replace the part all together.
@rynohobbies
5 жыл бұрын
He is shorter than most so I think I have to replace his neck with one from a female figure.
@sinchman1
6 жыл бұрын
Could you make a video on how to fix loose joints
@LifewithBrock
6 жыл бұрын
I have. Check the custom playlist.
@JeremiahJS1984
2 жыл бұрын
Dude! This video saved my Apocalypse wave Wolverine!! Thank you so much for making this video.
@LifewithBrock
2 жыл бұрын
You are welcome. Glad it helped 👊🏻
@alexruseljuk2349
2 жыл бұрын
Could you do a video how to fix a broken neck from a mafex figure
@LifewithBrock
2 жыл бұрын
Sorry don’t know Mafex well
@LeVibromaster
10 ай бұрын
This 5 yo video just saved my life thank you so much
@LifewithBrock
10 ай бұрын
Glad to hear that!
@drakozero8
3 жыл бұрын
Wonder if it's possible to add a double ball peg to that neck.
@LifewithBrock
3 жыл бұрын
Definitely
@FDNProductions
2 жыл бұрын
Instead of using a dremel tool to drill the hole, do you think I could heat up the neck with hot water and pierce a hole instead?
@LifewithBrock
2 жыл бұрын
Not advisable. Danger abounds with the wrong tools.
@FDNProductions
Жыл бұрын
@@LifewithBrock I ended up cutting the ball off the neck, and keep the head on using a small bit of blu tack/ sticky tack. It works like a treat and stays on when the figure is upside down
@RoundHeadK--jx7uu
6 жыл бұрын
Cuz I really want to see that custom of archangel that your doing .Even though they have a new one coming out but on the Bucky cap again . I need to see it on the Bull’s-eye or Sunfire buck . Good luck cuz 👍
@LifewithBrock
6 жыл бұрын
Thanks! I preordered that one too!
@christopherft4avalos667
4 жыл бұрын
Hwy Brock what size screw you use
@LifewithBrock
4 жыл бұрын
🤷🏻♂️
@Southtown_Paint_Appz
6 жыл бұрын
Looks cool if you would've used magnets at this point
@mingotownmusic6898
2 жыл бұрын
Thanks Brock, I'm going to try and fix the neck joint in my DC Collectible New 52 Darkseid. I found him on the floor yesterday with his head a few feet away.
@young_rob1826
4 жыл бұрын
Do you know how to fix a broken knee joint
@LifewithBrock
4 жыл бұрын
Depends :)
@young_rob1826
4 жыл бұрын
On a marvel legends
@ArmaanAhmed1502
2 жыл бұрын
A solid fix ... Amazing 😍
@DeadgrinCustoms
6 жыл бұрын
That's badass! great tip
@prollydatboi8841
4 жыл бұрын
That’s literally so smart wtf
@boox2147
4 жыл бұрын
Me: (when finds video) “sigh”
@sebastianmendozasegura2764
6 жыл бұрын
Primer comentario
@mikeybarrow1115
3 жыл бұрын
Thank you so much 😂 🤣
@garyjones1688
5 жыл бұрын
Love it
@sixtiviris
3 жыл бұрын
Hello! This is the only video that has helped me ! One question, what size and kind of screw did you use?
@LifewithBrock
3 жыл бұрын
I just eyeballed one that would work
@silver4golf
6 жыл бұрын
Would you recommend a dab of crazy glue on the peg for add protection of breaking?
@LifewithBrock
6 жыл бұрын
I don’t know if the glue will help from breakage but may e from stripping the ball off the screw.
@ryantaylor-smith9396
5 жыл бұрын
Can you use this with a broken foot joint as well?
@LifewithBrock
5 жыл бұрын
No. For this to work there has to be existing friction. For your broken joint you need a different technique. I have a video on how to fix a broken neck peg that may give you an idea how to fix it. Otherwise KZitem the problem and someone will have a video.
@Archangel-Michael369
5 жыл бұрын
Thanks for Sharing Bro... ✌🏽
@LifewithBrock
5 жыл бұрын
👍🏻
@CapsuleCorpse19
3 жыл бұрын
Hi bro. Any tutorial how to fix the loose hinge neck?
@LifewithBrock
2 жыл бұрын
You can use kiki liquid. It would be the easiest solution.
Пікірлер: 72