We've had a huge reaction to MASCHINE+, and plenty of questions about what's possible. In this video, product specialist Boris Mezga answers some of the hottest questions: kzitem.info/news/bejne/s2Z41Guif3N9Y2k
@JOYaL3ooo
3 жыл бұрын
Would love to make a review i make beats with akai..but love to make review of this beats ..so tell me can you manage to make a review of the machineplus
@kylew706
3 жыл бұрын
Hey can you plug two komplete audio 6’s in and use all the I/O?
@biccboiigaming628
3 жыл бұрын
So I have the maschine plus and everything is fine until we get to the actual audio. THERE IS NONE. It says I can use headphones but I still have no audio thru the headphones someone please help me
@kylew706
3 жыл бұрын
@Isaac Armani sounds like you’re a damn weirdo
@quepoxi
3 жыл бұрын
Did you save the stuff from 2:50 somewhere. I know it's simple for him but it really blew my mind. Ordered my Maschine immediately. Can't wait for it to arrive
@ScottSatchfield
4 жыл бұрын
Bought a MK3 two months ago, knowing deep down another device would launch shortly thereafter. And here we are...
@NakulKrishna
4 жыл бұрын
Scott Satchfield the mk3 is far better value for money.
@Roomer645
4 жыл бұрын
Same here bro ... always happens like that. The mk3 value will drop as of today like a hookers panties
@DeeJay003
4 жыл бұрын
Mk 3 ram is limited only to your computers spec. The Mk3+, at just 4gb ram, is just limited. It should be at least 16gb ram - only then would I would even consider it.
@Mr.Maritime
4 жыл бұрын
They did the same to me with the studio and mk3
@fax7451
4 жыл бұрын
I got mk3 last month...but I think if they only add standalone feature I will not buy it cuz I will always use these controller with my labtop. Next device I want to buy is the kk s61 keyboard
@jwes4588
4 жыл бұрын
NI: Ok everybody what do you want improved on Maschine? Us: PLEASE JUST GIVE US A DAMN TIMELINE TO WORK ON!! WE’VE BEEN ASKING FOR A DECADE!! NI: ...A stand-alone version? Ok if you say so :))
@sebanrocks
4 жыл бұрын
Was it not standalone all this time?
@christopherrobin9163
4 жыл бұрын
Jean Nibard this. It’s amazing for getting a loop based groove going, but forget about trying to compose a linear song with dynamic changes. All we want is a timeline! The new “clips” feature is still missing the point imo
@christopherrobin9163
4 жыл бұрын
Jean Nibard it’s just hard because Maschine literally has the best pads on the market, as well as other amazing functions...if ableton could make a push “lite” that works more like a standard 16pad sampler I’d spend it all 😂
@oubimcius4032
4 жыл бұрын
@@sebanrocks ya always needed a computer.
@kaafaa5944
4 жыл бұрын
yeah a standalone without daw, not without pc. its our fault aww we didnt explain well our wish
@DopamineOverload
4 жыл бұрын
I'm as big an NI fanboy as anyone can get... but there are a few things that aren't sitting well with me, regarding these first impressions of Maschine+: 1. The price. No way will people drop $1400 for a standalone Maschine (especially with millions of artists going broke because of this year and the pandemic), when you can buy a MK3 and a used quad-core Dell laptop with an SSD, 16gb of ram, and full HD display (Precision M4700) for a total of only $900. People have made videos of how they do a quasi-standalone MK3 with a custom stand and a hidden laptop with the lid closed (disabling "sleep" mode), underneath it. This is a great option, especially if... 2. There's no battery? None? Not even a port for a future installed battery of some sort? See number 1, above. A Dell laptop and the original MK3 can work without power for 3-4 hours easily. Just take your MK3, laptop, headphones and a short USB cable to the park, connect cable, close lid, and you're golden. 3. If there's no battery, people will go to the MPC Live 2, or stick with the highly-affordable MPC One... which is KILLING it these days. I used to not be an Akai person, but when they released MPC Beats, I got hooked on the workflow. I still think Maschine is better, across the board, but the MPC workflow is appealing. I think it was a wise move for them... and that immediately followed the release of MPC One... it didn't receive a ton of love at first, but people came around to it and now love the thing. Additionally, it can work with a battery bank and adapter. 4. I don't need a touchscreen, but a lot of people asked for one. What makes the MPC One appealing is the large amount of dedicated buttons (which the Live/Live2 does not have) as well as a touchscreen. Pads may be slightly smaller, but that's not a deal-breaker. 5. Lastly, people complained about MK3 not having a phantom power switch for condenser mics. This doesn't, either, so it seems.... I really dig all the Maschines I own (Studio, MK2, MK3, Mikro MK2, and JAM). But I don't think this is going to fly with a lot of people. Just reading through these comments, and the posts at the official Maschine forum... and seeing the amount of dislikes, already... I don't know. I just don't know. What I like--- the (hopefully) improved encoders... the MK3 suffers from smooth to "too loose" encoders right out of the box (I returned two MK3s before hanging onto my main one-- which still has 3 loose encoders, and 5 good ones (been like that since day one).... The main thing people want is the song mode, the arrangement improvements (the stuff that's coming, probably with the release of Maschine+). That's what we need most. Just some food for thought! Still love the whole Maschine thing.
@jaunti
4 жыл бұрын
I could not have said it better. Well said!
@DopamineOverload
4 жыл бұрын
@@jaunti Craziness! While we've been heard about a lot of things, we haven't been heard about a lot of things. Y'know?
@jaunti
4 жыл бұрын
chriscauldermusic I agree. As much as I love NI products, it has changed my life and perspective as a music creative but they’re seriously lacking ingenuity and innovation because, the only difference between the previous products and this one is the computer’s absence. Wish there was more effort on making the software more constructive than what it is now. I’ll stick to my Komplete Kontrol, MK3 and Mikro MK3. They do me just fine.
@DopamineOverload
4 жыл бұрын
@@jaunti Absolutely.
@jaunti
4 жыл бұрын
chriscauldermusic they’re starting to become the “new” Apple. Jacking up the prices on new products with features that are supposedly “state-of-the-art” to them but the chances are slim to none for the customers. It is what it is, I guess 🤷🏾♂️
@charlesrudd2061
4 жыл бұрын
I have both Mk3 and MPC Live. For my $1000+ I spent on the MPC, I have gotten all I needed and expected. Can't count how many times I've had to reinvest in NI because they dole out features with new hardware. I've already bought a Studio, upgraded to Mk3, invested in Jam and Komplete Ultimate. Now they drop a $1000+ new piece of gear that I of course I want, but can't justify buying for just standalone functionality. My MPC has been standalone forever and never once have I felt like I needed to throw another $1000+ at Akai. I love Maschine, but if there's no crossgrade/upgrade I'm more likely to divest.
@aanallein5922
4 жыл бұрын
How do you find MPC Live? I am just starting out with Ableton with a Novation Launchkey. Would like something standalone as well.
@adamdykhouse5102
4 жыл бұрын
Agreed. I've been a maschine user for a bit and just made the switch to MPC one (of course right before this gets announced). I won't return it for the maschine+ though because it's half the price and can do basically all the same things. Using KitMaker (an extra $30) I was even able to port a bunch of maschine drum libraries over to the MPC for use in standalone mode. If I really want to use Kontakt or a more complex maschine kit, I'll just resample them in MPC, bring my mk3, or just bring my laptop with me. Definely not worth $1400 when theres a $700 option that will get you 90% of the way there.
@Roomer645
4 жыл бұрын
You people dont get the point ... NI is a company and a company needs to make money. People who already invested in NI are not making them extra money really. They want new customers, and maybe even MPC users that were suckers for standalone devices. All these Maschine upgrades are only costing them money to develop and expansions are not making them much revenue so they need to come out with new hardware from time to time. So, the Maschine + is aimed at Mpc users, or users that are currently looking for a device and are not sure what to get. Akai used to be the only one with a one stop solution but now NI has this new device. Once more, loyal customers are not the most important, they already have their money, it’s the new customers that are important !
@lwpweb
4 жыл бұрын
@@adamdykhouse5102 the mpc one sucks, has no arranger like maschine does. !!!! How to build up complete songs with the MPC in standalone mode?
@MakingMadBeats
4 жыл бұрын
@@lwpweb By using MPCs song mode. Although this is now more Limited since Maschine ist going to be able to place clips freely at the timeline.
@josephhanks5001
4 жыл бұрын
Been dreaming of this since MK1
@theofuqua2599
4 жыл бұрын
2 days ago I went to guitar center and Sam Ashe and they were sold out of MK3. Thank God I decided to just wait. Now look... lol Awesome !!!!!!!
@WINTERMUTE_AI
3 жыл бұрын
GOD bought all the MK3s at the guitar center? Wonder if he is planning a show.
@GMGOmusic
4 жыл бұрын
Its like reconnecting with your first love who left for college and came back several years later looking better than ever.
@damelos4039
4 жыл бұрын
:-)
@kgxbeats2569
4 жыл бұрын
yeah but she had a mam and still didnt want u thats what this is jaja
@GMGOmusic
4 жыл бұрын
KGX Beats 😅😂🤣
@leepride7978
4 жыл бұрын
GMGOmusic with 4GBs of RAM she wouldn’t be much good. During sex she would just pop, glitch, and wouldn’t do anything you really wanted. She’d crash and leave you unfulfilled. Just a waste of space on the couch asking for more money.
@IkanDakai
4 жыл бұрын
Ok cool. Now update the software like we all been crying about.
@DopamineOverload
4 жыл бұрын
That is the main thing we want. That is what we have wanted for at least 6 years.
@IkanDakai
4 жыл бұрын
chriscauldermusic it just doesn’t make any sense to me anymore.
@filmerdennis
4 жыл бұрын
What’s wrong with the software? I have no issues with it.
@DopamineOverload
4 жыл бұрын
@@filmerdennis The lack of a proper arranger. We've been asking/begging for years. It IS coming... but with the release of this.
@jaycairo5160
4 жыл бұрын
the sofware can def get an upadate, maybe even the gui too
@MJ-xm1jb
4 жыл бұрын
I just lost my mind🤯 I've invested so much into my, Maschine setup....I thought N.I. was dying off. I'm extremely excited to see this, Native Instruments! NOW if you'd like to send me a unit for testing, I'm more than willing to accept your offer😉😂😅
@oddfellow8366
4 жыл бұрын
Dude, NI dying off? KONTAKT is the industry standard for most sample libraries available. Their hardware may not be everywhere, but their software sure is.
@jkq2006
4 жыл бұрын
@@oddfellow8366 except Maschine software
@kgxbeats2569
4 жыл бұрын
@@oddfellow8366 ? really
@somtamthai9429
3 жыл бұрын
Bought the AKAI MPC Live II three weeks ago and I love it.
@Zsklar
4 жыл бұрын
The fact that they priced this close to what you can buy an MPCX for is just mind blowing. I couldn't imagine not putting a few more hundred dollars down for an MPCX over this.
@patientzero4889
4 жыл бұрын
This looks like it has some hug potential as a live performance tool, which frankly the electronic music world is screaming out for. I'm into it.
@MrAyuub22
Жыл бұрын
Fred again? Looks like you predicted it, he has been using this as a live performance tool
@GRYHND
4 жыл бұрын
I built this myself 2 Years ago with a Zotac mini PC, 7“ Touchscreen and Maschine MK3. Costs about 800€ and had full access to all VST‘s.
@RP-mp4ow
4 жыл бұрын
I need a video of this process
@GRYHND
4 жыл бұрын
I sold my MK3 last year. But I can PN you the required gear if you have insta. It’s an easy setup.
@RP-mp4ow
4 жыл бұрын
Phil Mood that would be great!
@vforvillain77
4 жыл бұрын
@@GRYHND PLEASE me too? im papagypsy on insta
@thefunklives
4 жыл бұрын
@@GRYHND hit @thefunklives on insta if you can too
@issiewizzie
4 жыл бұрын
What's funny is I used to fantasise on how to redesign the MK3 for a standalone. I used to always come back to the original design of the MK3 with new internals and that's exactly what you guys have done a great job. The MK3 was quite good looking anyway.
@ChristopherJenkins73
4 жыл бұрын
I think $899.99 would be fair... $1399.99 is just to much, for what it is. I can dig NI really did step up and give us a STAND ALONE!
@PHeMoX
4 жыл бұрын
Yeah, I'd get a $800 laptop and Maschine MK3 (or maybe the Mini MK3) and would have better bang for the buck. I do like the stand alone concept a lot, but honestly I think even the MK3 is hugely overpriced at (around) $649. It's barely worth half of that.
@BeatsbyVanity
4 жыл бұрын
Similar price as the Op-1 (which many also consider overpriced) this is way more expansive though. I like the idea of starting a beat away from the studio and bringing it back to a daw to finalize.
@DopamineOverload
4 жыл бұрын
Totally agree on the price. I have a used $250 Dell Precision M4700 laptop with 16gb ram, full HD display, SSD... Maschine MK3... I disable sleep mode, close my lid and I have a standalone Maschine that runs on battery power for about 4 hours, with 75% charge. Total cost: $850 (when MK3 used to be $600, not $650). Everything I need, one place.
@slapopimp
4 жыл бұрын
LOL... the Maschine studio was more than that and didn't have an audio interface builtin.
@damelos4039
4 жыл бұрын
@@DopamineOverload Sounds smart
@intrascendente
4 жыл бұрын
Wow… 1,400 USD That is two MPC Ones ._.
@Str8representing
4 жыл бұрын
Standalone maschine long awaited
@bardofrings1371
4 жыл бұрын
Ignore all the naysayers here. Maschine definitely has a number of flaws, and the software is surely in need of improvement. But if you take the effort to learn to use the system, the workflow is amazing once you get into it, as it is! This new Maschine looks like exactly the right next step. If only NI would offer a special upgrade price for existing users of Machine and Komplete!
@Strepite
3 жыл бұрын
Great to see NI expanding to standalone universe for some good competition which will result in better products overall. However the price seems totally ridiculous. I paid $1700 for Akai MPC X new, and for $400 extra, feature wise it is incomparable. 8 CV outs / 2 XLR mic preamps with +48V (+ 2 switchable HI-Z line front inputs) + 2 line inputs or switchable Phono inputs / 4 MIDI outs & 2 MIDI in / huge touchscreen / 16 Q-link pots with LED screens and so on....
@jaycairo5160
4 жыл бұрын
Imma wait just incase they build a maschine studio standalone
@agnz
4 жыл бұрын
Im waiting for the micro +
@EliteOnTheBeat
4 жыл бұрын
There BOTH coming and so is the komplete kontrol they did the same bs with maschine studio then released mk3 (Which btw they completely shitting on all of us maschine studio users for mk3 users in terms of functionality and it constantly changing as well) then they dropped KK49 mk2 then the MK3 Mikro and so on.... Maschine studio, Maschine Mikro, Komplete kontrol ALL will be standalone and released SADLY before Maschine 3.0 ............
@epicwork5970
4 жыл бұрын
@@EliteOnTheBeat komplete kontrol keyboard will be stand alone ?id rather get that . You can use the whole komplete ultimate in standalone
@sontwisted
4 жыл бұрын
@@EliteOnTheBeat the mk3 didnt impress me enough to ditch my studio
@JAdeWii_
4 жыл бұрын
Dreams do come true.
@djse
4 жыл бұрын
For the price of Maschine and a computer you can have Maschine + : a standalone Maschine with an integrated less powerful computer inside
@Digiphex
4 жыл бұрын
Such a dumb product.
@djse
4 жыл бұрын
@@Digiphex I wouldn't say it's a dumb product, but it's more about the price tag. 300$ less would be ok. But the idea in itself is great, it's always good to have less computer on a setup to focus more on performance and people. I hope they'll take the same direction with their DJ stuff (without the big price rise) :)
@JohnSmith-pn2vl
4 жыл бұрын
@@djse first, try it out, then talk. quality knobs etc cost BIG TIME!
@alainszyller615
3 жыл бұрын
it doesn't need a computer because it's a computer by itself...very attractive , looks super cool
@djthatguysmitty
4 жыл бұрын
Wow...can’t wait to see more!
@kgxbeats2569
4 жыл бұрын
more of what the same thing its a ripoff its for the kids who wanna showoff fot ghere weird friends its garbage
@JohnnyBgood89
4 жыл бұрын
Friends, I think we're missing what they're trying to do here.. We aren't supposed to take this out in the middle of the park somewhere and make beats like the battery-powered OP-1 or 404. This is so we can ditch our computer (which I couldn't be more ready to do). I hate taking my computer out to shows or on the road. This is like taking out a real synthesizer instead of a midi controller. I've used the Maschine MK2 for years and always wished I could stay in the Maschine workflow without relying on my laptop and maxing out my CPU. Idk, I feel like this is a great solution for my own workflow at least. Thanks for letting me ditch the laptop NI!
@sontwisted
4 жыл бұрын
The peoblem is there is a competitors device that does both with more options for less money
@SuperPussyFinger
3 жыл бұрын
I was ready to purchase this online before I watched this. I kid you not; my credit card is sitting next to me on my desk. But this demonstration is so overwhelming and confusing to me, I'm running away.
@DoctorNemmo
2 жыл бұрын
I got mine yesterday. I never got myself to use maschine mk2 (I ended up always going back to mouse an keybord) but there's something more intuitive about using maschine+ that makes it so much rewarding.
@NativeInstruments
2 жыл бұрын
Hope it will find its place into your workflow 🤞
@Longjohngolden
Ай бұрын
So does this machine have a built in catalog of sounds already?
@DoctorNemmo
Ай бұрын
@@Longjohngolden Yup, most of the expansions that come with Maschine.
@dailove3
4 жыл бұрын
I knew this was coming. Thought it’d be a little bigger, but 👋.
@acqua_exp6420
4 жыл бұрын
HELL YEAH!! For people traveling and for live setups - this is GOLD. Props to the engineering team !! :)
@ivanbatucada
4 жыл бұрын
Boris ... I miss you!
@hamtramckchronicles
4 жыл бұрын
Boris is the man! Always love watching his demos! He's good at what he does.
@ivanbatucada
4 жыл бұрын
@@hamtramckchronicles Boris!
@igorbeuk6298
4 жыл бұрын
Officially this is the best groove box, sequencer and music station
@kgxbeats2569
4 жыл бұрын
? really u must work for them or getting one for free thia is shit
@Zsklar
4 жыл бұрын
I mean, I'm a big fan of Maschine and absolutely love my MK3, but my Live 2 craps all over this thing. I mean, it's cool, but not for $1400.
@kgxbeats2569
4 жыл бұрын
theae kids want thia garbage for cap not cause they see the value tjere is none at that price
@Kkidzz
4 жыл бұрын
Okay. Your Live 2 has 2GB's of RAM...sooo more like, Loose Stool's it.
@YungPlumber1
3 жыл бұрын
The touch screen sucks to me, feels like an atari console and the Akai pads are a thing of the past, but the Akai price is worth it.
@TokarTK
4 жыл бұрын
Amazing update, stylish and modern. Really in time with the release during everyone is trying to produce own stuff.
@vforvillain77
4 жыл бұрын
Only one pair of outs, no battery, plus a $1400 price tag is a no for me, dawg.
@jorgefrias7889
4 жыл бұрын
No Battery defeats the purpose for me. I wanna be able to sit anywhere with this thing and no strings attached.
@earlsfield
4 жыл бұрын
@Dallon Ghan plus, can you imagine how many issues there will be to sync this up with software. For this price you can buy a decent computer, which by default wins over this thing with features.
@angelesk9382
4 жыл бұрын
Only 2 outputs?
@vforvillain77
4 жыл бұрын
@@angelesk9382 only 1 stereo pair, yes.
@earlsfield
4 жыл бұрын
@Jayo Delaware And this is ....what, this is not a computer? It has quad processor, RAM, motherboard, storage. This is a computer, buddy. It just has screen on the device. If you want to go old school, then get Akai S2500 and an analogue synth, buy a mixer, buy tons of effects, processors, other synths and sound sources. Then buy a tape recorder. Then go see how much that costs you. I loved working with tape, and no screen. It is different workflow. But expensive and tedious one at that. I am building my studio for years, adding pieces of equipment when i have a budget.
@monochet
4 жыл бұрын
$1400?!?!?! Screw that!! I already own the mk3 that I won’t be able to sell for half what I paid for to fund this thing. I’m buying the MPC one instead for half the price.
@Roomer645
4 жыл бұрын
The MPC one is a nice piece of kit ...
@heraclitusephesus9368
4 жыл бұрын
I totally agree, the price is extremely high.I own an mpc one and I think it's a logical thought for everyone.
@davewerner7609
4 жыл бұрын
Agree; they screwed up on this one. Typical NI...they don't do proper market research. They have the right idea...but need more beef under the hood for that price -- especially when an iPad has more horse power.
@MIKExMASSACREx
4 жыл бұрын
Hahaha the mpc one is so bad, I bought it and returned it within a week. Super cheap plastic everything about it was cheap af haha no time stretching like native
@monochet
4 жыл бұрын
NPC007 true on the time stretching but personally I have never really time stretched so that’s a mute point for me, I do mainly electronic music with recorded synths or softsynths. I use it to create drum patterns with one hit samples. As for the cheap plastic, I’m ok with that. I’m not hitting people in the head with it, it would chill with me in my studio or couch or whatever. The thing is, for $1400 I still have to bounce everything into ableton just so I can do something as basic as automation between patterns/scenes so I rather do that for $700 instead. I’ve been using maschine since mk1 and I keep upgrading because of the promise that it might be a one stop shop one day where I could finish a track with it. I think I’m done with it. The MPC one I can do most everything I need that the maschine does from my couch without having a laptop tether to it and then finish in ableton as always.
@pabloespada6174
4 жыл бұрын
It has no battery? At that price point? 🤔😕
@EasterlyArt
4 жыл бұрын
Laptops come with chargers anyway, so... When was the last time your desktop has just a battery?
@getemouttahere2965
4 жыл бұрын
EasterlyArt stupid comparison, if it’s supposed to be a portable device then a battery is expected to be in the device
@EasterlyArt
4 жыл бұрын
@@getemouttahere2965 Maschine + 2 I guess? Heck, I'm just happy this even exists and it's more than I imagined.
@orlandoberrios7155
4 жыл бұрын
Facts. The battery alone on the Live changed how I work in a profound way.
@EliteOnTheBeat
4 жыл бұрын
@@EasterlyArt "laptops come with chargers" is IRRELEVANT as far as maschine+ being portable goes. There trying to sell this as a standalone...needing a computer would defeat the point of buying it. you could just using any maschine hardware and do that anyway. LOL. And "desktops" don't use batteries thats for laptops. haha. 🤷♂️🤣
@intrascendente
4 жыл бұрын
Very nice, but… what about multi-MIDI and CV/Gate?
@shayneoneill1506
3 жыл бұрын
This things pretty much meant to play Komplete stuff. Aint a lot of room for ext modular gear in that universe.
@Strepite
3 жыл бұрын
Akai MPC X or MPC Live 2...
@LAKonfidential
4 жыл бұрын
Its amazing they keep ignoring the real problem which is the Software functionality itself! The Piano Roll Screen is so tiny you need Glasses to see during extended studio hours.
@0e0
4 жыл бұрын
love maschine but ya the piano roll could be improved for me
@xXlDUBAHOLIClXx
4 жыл бұрын
I don’t understand why no one has copied fl studio. It’s piano roll has been king for decades. I wish that piano roll was the industry standard. I hate using fl studio but it’s ease of access and ideas does it for me.
@kgxbeats2569
4 жыл бұрын
facts thats why i went akai
@b3at2
4 жыл бұрын
LA Konfidential they need to just let FL studio be the software
@ernestparker7261
4 жыл бұрын
One thing at a time. But you’re right. The piano roll is trash. I know they started off hardware focused but to be a complete daw you have to be flexible. Make it easy to click on melodies when you feel like using your mouse.
@user-tw5ek1gg8j
4 жыл бұрын
NI Thank you for listening to us WE LOVE YOU!!! This is defiantly on my buying list I hate to be that guy, but next step is a builtin battery too, or maybe a modular battery/charger... thing that I can take soon to be my lovely Maschine+ to the woods NI Cheers!!!
@kgxbeats2569
4 жыл бұрын
really dude they payi g u to comment lol this is a joke
@NativeInstruments
4 жыл бұрын
MASCHINE+ is compatible with all DC laptop power banks, providing operating times of 8 to 15+ hours per session.
@timhatch27
4 жыл бұрын
This is great! But I think you missed an opportunity with not making it battery powered.
@Parialated
3 жыл бұрын
Ssd drive?
@vincenttam8642
3 жыл бұрын
You can use those laptop powerbank rated with 15V 3A for it, I tried and it work.
@madnuts123
2 жыл бұрын
Just bought one today, have to wait for Christmas Day now, then tunes are us 🎶🎶🎵🎵
@NativeInstruments
2 жыл бұрын
Hope you enjoy it!
@christopherrobin9163
4 жыл бұрын
This is the final nail in the coffin for NI with me.....
@PaulStephenson003
4 жыл бұрын
this is an interesting idea to take maschine out of the studio/laptop, but there are other things I'd like to see - like better intersection/integration with DAWs like Logic. Especially considering many maschine users have a stronger computer than what's in this box. I (still) have a hard time moving from Maschine into a proper DAW to finish (arrange, mix, master) a track. Which moves me into the next big issue - maschine still doesn't seem to have addressed how to make a real track in Maschine vs. loops/beats. Ideas/song is a good start, but... not there yet. I don't need another computer - I need a better integrated experience with the rest of the ecosystem. Sadly this won't earn a pre-order purchase. I hope it's good enough for NI that they can get back to the roots of helping us make and finish songs more in the creative moment (which this does help with, but i quickly get to back to can't finish a track in maschine). Currently I have to come out of creative mode to think about how I get a beat into a DAW to make a proper track. I ❤️ maschine for making beats, but sadly I have not been able to easily integrate into my workflow with Logic. I'm probably the minority but the experience isn't there for me yet.
@nicksmith2852
3 жыл бұрын
Yeah I def don't think you're a minority. Maschine fan since MK1 but also since MK1 I've dreaded the process of tediously exporting all of my patterns and then arranging in a different DAW. Such a buzz kill
@andrzejkucharzyk9970
2 жыл бұрын
I don't think you are the minority.
@tungmeister10k
4 жыл бұрын
Great work, take my money now :) Haters can go away.
@itimmy101
4 жыл бұрын
You have $1,400 to spend??? Must be nice.
@antz7858
4 жыл бұрын
itimmy101 Ong he trippin
@KnockSquared
4 жыл бұрын
BORIS is dope AF !!!!! Congrats Native...Love yall !!
@op-1g.s
4 жыл бұрын
I am hoping for more videos 👍🏽❤️
@RP-mp4ow
4 жыл бұрын
I wasn’t sold on this at first, but after thinking about the possibilities and the new level of intimacy with the music making. Hardware that I can make a Komplete composition with and then easily transfer it to my computer for final touches. I placed my order- I am so excited for this. Best hardware offering on the market!
@ricflomusic
Жыл бұрын
How you finding it?
@RP-mp4ow
Жыл бұрын
@@ricflomusicthe things that are great about it are really great. Thr workflow is supreme. I don't think they put enough work into computer integration for hardware projects, you're basically just navigating the SD directory to find your projects- would have been cool if you could have just plugged it in and loaded songs. Also, after I bought it I immediately felt drawn to Renoise. Had some good jams with it. As a hardware box, its got an impressive amount of sounds/possibilities. I think the NI libraries are the main selling point more than the samples
@ricflomusic
Жыл бұрын
@@RP-mp4ow Thanks for the info, I'm currently new to producing and actually want to step away from computer screens so I got an SP404 a couple years ago but beyond fx making beats doesn't full initiative. After watching Freg Again boiler room set and other sources, I got a big feeling Maschine+ is what I need to double down on and I will be set for a long time before I question the computer integration.. hopefully. Nice one.
@RP-mp4ow
Жыл бұрын
@@ricflomusic it really depends. Would you prefer to be completely separated from the computer? Or maybe you can just get a really long USB cable? If you have Komplete, you'll have more libraries with a mk3. When you want to actually output your track, you'll have to dig through the directory to find your project- i think it would be easier to have the project in the computer
@ricflomusic
Жыл бұрын
@@RP-mp4ow mk3 has been recommended. Just that my 9-5 is on the computer so I just want separation. I like djing with controllers in a similar way but love the idea of portability and playing live with it only when I get to that level
@SuperBumps
4 жыл бұрын
As I have a mk1, a mk3, an a49, massive x, komplete etc. and a ton of expansions, can I just have one please? It will be happy with me.
@mazerbeamz
4 жыл бұрын
Fam... I was checking out 'other' stand alone products and you guys announced this literally 20 MINUTES after thinking to myself "When will NI drop one?"... 🔥
@kgxbeats2569
4 жыл бұрын
dont consider this carp trust me its a floo
@djductape
4 жыл бұрын
MPC smokes this thing :)
@REOvolt
4 жыл бұрын
And the million-dollar question is: “Will NI eventually port all their synths and fx to this platform and if yes, will you have to pay for them again if you already own Komplete Ultimate”?
@OperculumAudio
4 жыл бұрын
They will needa much bigger internal Hard Drive vs the 32gb one in this model. I think a 1TB SSD would be ideal and 16GB Ram
@cockur
4 жыл бұрын
Yeah good luck getting them to do that with the current specs. Maybe for the Maschine+ Mk 3
@OperculumAudio
4 жыл бұрын
@@cockur yeah, my nukbers are a bit ambitious and unrealistic but it would be cool
@deepaksingh-wu7hx
2 жыл бұрын
You have outdone yourself Native Instruments, boom.
@teacee
4 жыл бұрын
I don’t see amy reason to upgrade to the Maschine + when I already own the Mk3 , Studio and Mk1, because I use with the Komplete instruments, yes I can connect to my computer and use with my software instruments true, but to pay twice as much as the Mk3 just so I can play in stand alone mode with a sequencer I rarely use and lack of touch screen is a major fail for me, I have gotten use to my akai mpc x, and live ll touch screen as well as my Korg kronons, Roland fantom 6 and yamaha montage all touch screen. Imho what native instruments needs to get back in the game is a komplete kontrol standalone with maschine pads and all of the komplete software and effects all included in in the New Komplete Kontrol workstation, with a large 8” touch screen and touch knobs and mixer sliders, then you will have a powerhouse.
@donaldrichardson7363
4 жыл бұрын
THIS RIGHT HERE: what native instruments needs to get back in the game is a komplete kontrol standalone with maschine pads and all of the komplete software and effects all included in in the New Komplete Kontrol workstation, with a large 8” touch screen and touch knobs and mixer sliders, then you will have a powerhouse.
@teacee
4 жыл бұрын
Donald Richardson Word!!
@donaldrichardson7363
4 жыл бұрын
Even without the drum pads this would be a beast!
@Claidheambmor
4 жыл бұрын
It's not for me either, but people have been crying out for standalone Maschine since MK1. So the market is definitely there, it's just not us.
@dianevrules
4 жыл бұрын
@@teacee With all that s%^^& (Kronos, Fantom 6, x and live II), why the f^$$ are you even considering Maschine +??? Your channel says you are a production artist or some s^$$. No music on your channel. Where is your music posted? Im curious. It better be good.
@JOYaL3ooo
3 жыл бұрын
Great beast of machineplus ...soon ill make a review of my beats on the machineplus so stay tunned
@TimeScribe
4 жыл бұрын
Please let us connect Maschine Jam directly into Maschine+.
@jkq2006
4 жыл бұрын
There are usb ports at the back so you can connect other NI hardware like Komplete Kontrol keyboards
@TimeScribe
4 жыл бұрын
Jay Que The Jam could control the sequencer, clips and idea mode. So it is more than notes. Having the Jam connected directly to Maschine+ would make it powerful for composing and still portable.
@Roomer645
4 жыл бұрын
Jay Que yeah sure but will it Run Komplet also ? With that 32GB storage you can hardly fit any decent Komplet library. Then you would have to install it partly on SD card .
@TimeScribe
4 жыл бұрын
Sergio Casino There's no standalone that can compete with the capacity and power of a current desktop. NI knows that and this is designed to be standalone, which means compromises have been added. It’s not clear yet how complete the Kontakt port will be. So it may only run sample sets that are specifically compatible. We'll see. Also not clear if SSDs can be connected to USB ports. If so, that would give you the storage for large sample sets but this is where the 4g ram might be more of a limitation. I imagine Kontakt Instruments would have to have a smaller footprint, like the play series, to work well on this standalone device. I can't imagine the Symphonic series chugging along on 4gigs ram.
@lwpweb
4 жыл бұрын
@@jkq2006 question is: if it will play you intend to do.
@z1_Rome
4 жыл бұрын
I'm ready for the DAW improvements for my MK3. I'll probably get a future + iteration, but not this particular version.
@danindeed
4 жыл бұрын
Why couldn't you have just added a battery, especially at that price point.
@damjanscepanovic
3 жыл бұрын
or a modular synth xP
@joevargo2777
4 жыл бұрын
Gotta say the aesthetic looks dope as hell
@kgxbeats2569
4 жыл бұрын
1400 for plastic garbage smh
@jerrodkilla23
4 жыл бұрын
Can we get a proper daw? 3.0???
@stealthyBLK
4 жыл бұрын
RIGHT! exactly
@kgxbeats2569
4 жыл бұрын
@@ftj4441 well fix the crappy software this is shit
@EliteOnTheBeat
4 жыл бұрын
At this rate maybe will see maschine 3 in the year 2023. 🤷♂️
@nebula0697
4 жыл бұрын
@@ftj4441 there are people who want the daw inside maschine and for whom that's what standalone means.
@nebula0697
4 жыл бұрын
@@ftj4441 i know what it means. now the same word can mean different things to different people i guess,, but if you can only create loops and no songs and you need a computer to create songs at least you should have some basic. sympathy for what it means *to me* and, judging by comments, to a lot of other people. Maschine needs to do a few things with their daw software, including make the piano roll easier to see and put the DAW in the Maschine Plus
@RickJamesFPV
3 жыл бұрын
Just got mine tonight! No sleep for the next 3 days!💯😍
@Sinosure
4 жыл бұрын
No battery power would be a NO GO!!!😔😔😔😔
@prestonhart6685
4 жыл бұрын
I love you, NI! And, I love Maschine! Immediately pre-ordered.
@kgxbeats2569
4 жыл бұрын
really lol sad for u fhis is garbage i would cancel that order
@prestonhart6685
4 жыл бұрын
KGX Beats just watched the music on your channel; you are definitely an expert on “garbage”!
@kgxbeats2569
4 жыл бұрын
@@prestonhart6685 yeah with a name like preston u woudnt understand that stick to edm i went to your page and saw nothing lol
@kgxbeats2569
4 жыл бұрын
i was giving u help and u wanna talk shit but u go ahead maybe h will acyually do something with music idiot
@albertobernardi5920
4 жыл бұрын
Would be nice to have a discount on the price if you return your mk3 for buying a Maschine+ like Apple is doing with iPhones... NI could use the components of the returned mk3s to build new Maschine+
@Roomer645
4 жыл бұрын
Alberto Bernardi usually tradeins are like insults ... Selling it used is always a better bargain.
@shinokto3972
4 жыл бұрын
Mpc one: half the price and cv out for my eurorack
@teacee
4 жыл бұрын
And you are tethered to a power cord at all times :(
@Claidheambmor
4 жыл бұрын
@@teacee you can get a battery pack
@vforvillain77
4 жыл бұрын
@@Claidheambmor battery packs arent the same. then you're out and about with that flimsy power jack all the time. Its really time for manus. to update power jacks and make them more beefy. One of the flimsiest parts of any piece of gear, always waiting to break. That lock won't save it, will only yank out the whole innards with it if something goes wrong. It's actually worse
@jpatrick_music
4 жыл бұрын
@@teacee Maschine + doesn't have a battery
@prospectnyc
4 жыл бұрын
Yeah but the synths in the MPC One are meh. The FM8, Massive, Reaktor, Retro Machines, and Monark makes this worth the price of admission.
@johnchesters81
4 жыл бұрын
Overpriced. Akai nailed the price point with MPC One
@jaycairo5160
4 жыл бұрын
true but the maschine has a better workflow
@dianevrules
4 жыл бұрын
@@jaycairo5160 Better for you. Not for everyone. I never used a Maschine. MPCs only. MPCs have the fastest workflow for me.
@jaycairo5160
4 жыл бұрын
@@dianevrules Good! then this video doesn't concern you.
@badnewzscubasteve
4 жыл бұрын
@@dianevrules if you never used a Maschine.. then how would you know?
@2reason4life
4 жыл бұрын
@@jaycairo5160 I don't thing so.. Maschine + is looking more complicated in ma opinion.
@Talib23401
4 жыл бұрын
Does this video say the song clips feature has been recently released (10:43)? Is this a mistake or should I keep refreshing Native Access?
@RP-mp4ow
4 жыл бұрын
It’ll probably be released when this thing ships out
@MrMarcLaflamme
4 жыл бұрын
So I see the CPU meter hovering around 63 - 69% for the demo track (which doesn't have much going on). Is this just due to unoptimized software or are the standalone limits going to be hit pretty quickly?
@dbts704
4 жыл бұрын
This is my exact trepidation or I'd be a pre-order customer. My [2019 16GB i7] laptop has trouble/hiccups after 7+ tracks with few EFX running and the sample rate low.
@Iredidv
4 жыл бұрын
Its still a beta. Once properly compiled expect a pretty big difference
@Strepite
3 жыл бұрын
@@ShroomJesus Useless for yourself...
@psychotrout
4 жыл бұрын
Dat room is awesome
@EdoardoMarcora
4 жыл бұрын
This will make the limitations of the Maschine software even more evident, especially given the absence of a touch screen and not being able to use computer (in stand-alone mode). Why not just make Maschine and Plugin instruments/fx for iPad and use that attached to hardware controller without screen?
@Roomer645
4 жыл бұрын
Never understood that in all these years they never took advantage of the Ipad. They could reach a huge new market as many many people have an ipad.
@supremelc3667
4 жыл бұрын
Sergio Casino my dream machine would be ipad as brain with maschine like controller
@Roomer645
4 жыл бұрын
@@supremelc3667 Exactly !! Being able to hook up the machine controller and everything would be done on the iPad. That's portable, powefull, secure and piracy would be a thing of the past. Probably too logical for NI.
@tonylancer7367
4 жыл бұрын
I hate to say this, but sometimes it is because, money.
@word2RG
4 жыл бұрын
Sadly, this device is defined more by its limitations than new capabilities.
@TuMalditaMadre
4 жыл бұрын
Limitations make hardware good.
@EternalFiresky
4 жыл бұрын
Tu Maldita Madre how does that make any sense? When you are making music, do you think its okay to feel limited by technology?
@tonylancer7367
4 жыл бұрын
@@TuMalditaMadre Unfortunately, this is not 1994 anymore, so as much as we are enamoured by the SP-1200 or the MPC3000, there is little excuse for hardware limitations in 2020.
@tonylancer7367
4 жыл бұрын
@@EternalFiresky To be fair, limitations bring another sort of creativity, and it is a some sort of challenge to yourself to be limited by tech.
@diegoalejandromejiacoy1973
4 жыл бұрын
It feels like the same exact MK3 except with some onboard processing.. for double the price.. I’ll stick with my MK3 and hope they update the software soon (like they’ve been promising..)
@MakingMadBeats
4 жыл бұрын
Why no touch capabilities when it comes at this price point? Would have made arranging and moving events way more easy. The MPC One has this at almost half the price. And again: Volume knobs on the back ☹️!!! Can we finally record mutes via Automation, nooooo!!!! Thumbs up for the clip function, though 👌!!!
@emblemcc
4 жыл бұрын
think the touch screen would make it much worse to control. I'm personally glad they did not go this path and stayed with knobs and pads as the tactility is one of the important features on a real instrument
@Roomer645
4 жыл бұрын
jan twentyfortysix with Touch you can choose and have both ! Now you dont have that option. Be honest, naming a file is crap with just knobs and cursors. Same as adding or removing or replacing notes. Touch certainly has its advantages and can be much much quicker in certain cases. Dont like it ? You use the exisiting knobs and cursor control like on the MPC.
@MakingMadBeats
4 жыл бұрын
@@Roomer645 Agree with you 100% on this one 👌! Give users both options.
@teacee
4 жыл бұрын
Sergio Casino agreed, we are in a touch screen world it would be nice to have the option.
@emblemcc
4 жыл бұрын
@@Roomer645 i still do not agree, touch screen is a horrible interface. It feels bad under the fingers and many things can get small quick, plus you cannot control it if you do not have sufficient lighting (on stage or during a day) more over you cover the information and it surroundings with your fingers, the position of what you control can change. It is just wrong, no matter that it is current trend. The real buttons and knobs are always where they are and that is super powerful on its own. Replace the strings on guitar with screen and will see how well you perform.
@Zsklar
4 жыл бұрын
32GB of storage? Why didn't they just add a floppy disc slot? I have 2TB SSD inside my MPC Live 2, which is totally standalone and totally portable.
@Zsklar
4 жыл бұрын
@Jayo Delaware lol. To begin with, I'm 51. Secondly, I've probably made more money on my music this year than you can dream of in a lifetime. Not only do I have a load 2 TB SSD card in my Live 2, I also have one in my MPCX, which sits next to my MK3 and a studio of about 70k worth of gear. You barking up the wrong tree son!
@kgxbeats2569
4 жыл бұрын
@Jayo Delaware u must be getting payed u are a garbage human lol what an idiot
@kgxbeats2569
4 жыл бұрын
@@Zsklar that dude is an idiot he has a whole n bunch of diffrent comments hes probably getting payed to comment cause this is straight up garbage
@djcarlo
4 жыл бұрын
This looks so sick! Good job NI!
@AdornationMusic
3 жыл бұрын
wassup DJ carlo 😃 just a fan here wanted to say hi 😎
@chaz-e
3 жыл бұрын
But you don't like Traktor lol
@napierii
4 жыл бұрын
It's good and stable my friend has one and he has had no issues but if this has a battery... game changer
@somniumdnb
4 жыл бұрын
In my case, this beats the Mpc purely just by not having a touchscreen. I'm annoyed by the price though, so I may still go the Mpc route.
@kgxbeats2569
4 жыл бұрын
dude its a no brainer this is garbage
@michael77448
4 жыл бұрын
Let us wait for Ableton Push 3
@dazeja
4 жыл бұрын
Please for us Maschine Loyalist offer a cross grade price. ****Update: I don't see a cross grade price. I hope this changes. It doesn't reward loyal users at all to make them spend double the price of a MK3 tht they've already purchased to just have stand alone features that's separate from the controller features*******
@Alley0op
4 жыл бұрын
Thumbs up Tired of always getting paid over and over again. NI always asks that we pay more. I upgraded Komplete 12 last year, 199 €, now Komplete 13, 199 €. Bought Maschine MK1, then MK3, 599 € now the +Model, 1299 €. Except having (sometimes) 50% on Maschine expansions, I wonder today if it is worth staying. Too much expense for so little return. The products are good, but the commercial approach to loyal customers who have been present for years and years is deplorable. We are asked to make donations for famous artists in this time of crisis in order to help them overcome the period. But we, indies, who for many spend our money on our passion, are not even entitled to special Covid prices.
@Roomer645
4 жыл бұрын
You do not get it ... They already made money of you. Loyal customers are less important than NEW customers that will buy new hardware and make more money. Loyal customers only cost money as they want new features and upgrades and those updates COST money and customers are not paying for it. Sure, they might buy an expension or 2 but big money is made by getting new (Akai MPC) customers than only had one choice when it came to standalone machines.
@Alley0op
4 жыл бұрын
@@Roomer645 _Loyal customers only cost money as they want new features and upgrades and those updates COST money and customers are not paying for it_ Absolutely wrong. I've been a customer for 10 years and I'm not going to list all the products I have so as not to make you uncomfortable!
@detroittrickster3327
4 жыл бұрын
@@Alley0op lol well said
@dazeja
4 жыл бұрын
@@Roomer645 I do get it, but that doesn't make it right. Plus the idea that Loyal customers only cost money is ridiculous and honestly counter-productive to making money. Repeat customers can sustain a company when new customers disappear. Of course, you want both, but when you start short-sighting repeat customers is when you lose your longevity. That is true in any industry.
@SOO100BRAND
3 жыл бұрын
I'm trying to use my midi keyboard to control the Maschine sounds. When I hook it up only the pad with the sound on it is triggered. The other keys do not play. On Maschine I can press keyboard and play with pads but only one note is responding from my keyboard. Do I need a Native Instruments keyboard?
@budsticky
4 жыл бұрын
Stand alone device....but wait, let me show you how to connect it to the computer to finish your tracks.
@plrplm
4 жыл бұрын
lmao
@kgxbeats2569
4 жыл бұрын
thats ni for u left thwm years ago best thing i ever did
@ErikSpott
4 жыл бұрын
@@kgxbeats2569 yo what are you using now? If you dont mind saying, and whats your genre?
@kgxbeats2569
4 жыл бұрын
@Jean Nibard i got it to ni is a joke software meh usable all i use is kontakt and once i get my motif rack tha will.probably be used less
@kgxbeats2569
4 жыл бұрын
@Jean Nibard yeah there midi keyboards are cool overpriced though
@Iredidv
3 жыл бұрын
On the box there is a Bluetooth sign...but nothing has been mentioned about the purpose . I dont think it wiil be for bluetooth speakers but more for wireless midi, or maybe with a small Bluetooth keyboard it could be handy to name samples, songs... I would love that. :)
@budsticky
4 жыл бұрын
Maschine+ MKII dropping in November 2020. I'd wait.
@Str8representing
4 жыл бұрын
seriously?
@sontwisted
4 жыл бұрын
Speculation or facts?
@Juxtapose76
4 жыл бұрын
Whatever makes you happy. Krazy!! Great job N.I. keep them coming..⚡🎯
@eliaszerano3510
4 жыл бұрын
Please tell me that you improved the quality of the Endless Pots !? Are they finally keep the same resistance longer than just a few month ? And keep working without parameter jumps more then 3 Years ?
@edmo-l4d
4 жыл бұрын
Agree. I have tried so many Maschine and every time the encoders are loose, tight, all over the map. Please fix this NI!
@Roomer645
4 жыл бұрын
Christopher Edmondson So, they become worse and worse after time ? Any solutions to that ?
@plrplm
4 жыл бұрын
the exact same reason my once beloved mk2 is now shelved. no proper solution for years. moreover, NI support refused sharing a slightest bit of info about the encoders. I dont have authorized NI service out here, and you dont want to help me fix my shit in any way. alright then, bye bye NI
@damelos4039
4 жыл бұрын
@@plrplm Sell it and get a new one. Be honest with the potential buyers in your ad description. You'll get something for it. Then use that money to offset the price of a new one. Why keep it on a shelf?
@kgxbeats2569
4 жыл бұрын
they not fixing shiy
@densidad13
4 жыл бұрын
Food for thought: DAW arrangement functionalities and a performance instrument interface are two different technological goals. That is NOT to say they are not compatible but making a hardware device accomplish both must be though as an open problem with many possible solutions and compromises. Developing a custom computer for a device (optimized for refurbished software) is not to be taken for granted. That justifies (to some extent) the limited cpu specs. I think they're are being consistent with Maschine original orientation: a sketching tool, beat making device and performance instrument. Also the mappings for external gear is a nice addition. Going for a DAW-like stand-alone hardware device capable of running vst's would make a much greater effort (and greater CPU, RAM and memory specs), specially considering portability and instrument playability. My opinion: Amazing but over-priced product. Stop crying: no body is pushing you into buying anything, re-think your product purchases or telling you how to produce.
@tony_ypnar
4 жыл бұрын
This is frustrating because NI is trying to get everyone to use their software, but for my personal needs and musical style I rely on some boutique VSTs and Ableton, which this won't support. You were so close NI
@HenningSprang
4 жыл бұрын
what should they have done? Build ableton into the device? if you prefer ableton, push is your goto, isnt it?
@Esaelectronics
4 жыл бұрын
yeah push2 is great that would do it, nothing is perfect,is it gonna be useful to you for the money thats all you need to ask
@lamarlamarlamar
4 жыл бұрын
It's meant to be standalone with other gear. If you're just looking for a controller for Ableton then push 2 is the answer
@tony_ypnar
4 жыл бұрын
@@HenningSprang Well ideally a standalone controller should be DAW agnostic and support VSTs.
@HenningSprang
4 жыл бұрын
@@tony_ypnar vst's are OS specific - most are built to run on mac or win some run on linux. It might be possible to support the Linux ones, as I heard M+ is based on that. the other ones might be difficult, even though i read there are libraries that promise to make mac/win vst plugins run on Linux, I assume it's difficult. I have rarely heard of Hardware that can run VST plugins, and no current standalone device in this price range does it, obviously so far nobody bought these things in the past, so why should a company invest in trying this one more time?
@akinkunmicook2977
4 жыл бұрын
Wow 😲!
@systemdnb214
4 жыл бұрын
I want to know how you use your expansion packs in stand alone mode. Will you be able to put them on the internal or extra storage, as card, via Native access?
@SiriusLeeMusic
4 жыл бұрын
Or komplete??
@Roomer645
4 жыл бұрын
Most likely on the internal flash but thats just 32GB and when you turn the device on for the 1st time it only has like 18GB free due to the OS, maschine and massive software, 8GB standard library and what not. Expansions max it out really really fast and the included 64GB SD is a nice touch but with the avid NI user its a matter of 1 day of downloads of previously purchased expansions and its full. Komplet is the same thing and even worse so your looking at probably a high capacity 512GB or 1TB (very expensive). Ofcourse you could probably connect an usb SSD but it defeats the purpose of standalone if you constantly need to connect (and take along) extra devices. The internal storage should have been 256GB which would have sufficient for 95% of the users. Right now i am sure that with the NI software the 32GB is NOT enough for 95% !
@systemdnb214
4 жыл бұрын
My studio situation has all my NI stuff on my 2TB SSD on my laptop. To my knowledge you can't have it registered in 2 different places right? So i would have to unregister my stuff and put it on an external? That's what it's seeming like.
@systemdnb214
4 жыл бұрын
@@SiriusLeeMusic I thought about that too but I'm sure it will come with Komplete selection or whatever it's called.
@damelos4039
4 жыл бұрын
@@Roomer645 My thoughts exactly. Need to add a HIGH capacity SD Card. All my expansions are on an external SSD now so if I had to duplicate that, I'd be ok with it. SSD capacity is pretty cheap these days. I just picked up an internal 500GB drive for less than $85. Small, lightweight. No real inconvenience.
@lokoijjuhh
3 жыл бұрын
Why when I add a sample it won't play in the machine in self? Why am I having problems installing the Native Instrument plugins?
@holotape
4 жыл бұрын
For this price...I'd rather a laptop
@wickeddubz
3 жыл бұрын
You should more verbs with you. (:
@MrGlennBlack
3 жыл бұрын
Well good luck with Windows 10 when inspiration strikes and the laptop don’t want to let you.
@DubElementMusic
3 жыл бұрын
good shit, maybe gonna buy one next year
@BeatCommission
4 жыл бұрын
Who's ready for the software version to get even fewer updates? 'Cause that's what's going to happen.
@jkq2006
4 жыл бұрын
lol. Exactly, as cool as the new hardware it is if i cant automate tempo, time signatures, suppoort vst3 or have real time stretching in sampler mode then I am sticking with ableton until they do.
@Roomer645
4 жыл бұрын
Nope, they will come with version 3.0 and will make previous users pay for it ! Like they did with V2.0 and the loyal maschine mk1 users that had to pay an extra 100 dollars to get the functionality that they needed to have from the get go. Mark my words ! The new Maschine+ users will get the upgrade for free ....
@ChumpyDumps
4 жыл бұрын
@@Roomer645 You know charging for major software updates is very common right? Most of the major DAWs charge for software updates. Even a few VSTs charge for updates, like Omnisphere. It's something to complain about but it's a standard. And who knows, they have different leadership now there's a chance the philosophy has changed on that matter. But $100 for a software update is truly on the low end of the price scale compared to other companies.
@ChumpyDumps
4 жыл бұрын
It's going to be running the same software there's not two versions of the software here.
@johansmolinski
4 жыл бұрын
That will be available as a subscription model.
@richardgordon9939
24 күн бұрын
i have komplete ultimate 14 on my pc. how do i download it to mashine + ?
@supremelc3667
4 жыл бұрын
Can the Ram be upgraded?
@jaycairo5160
4 жыл бұрын
great question, but i think its integrated
@angeldc54
4 жыл бұрын
Nope
@JohnSmith-pn2vl
4 жыл бұрын
i like to see Prices going up, we are in desperate need of high quality controllers for all the Software, please make more of this (not just this standalone but all controllers and especially more knob controllers) step up the game for the industry. we are bombarded with cheap blinking toys. a good guitar/drumset/saxophone costs well over 1000 and more, why can't have electronic artist the same quality, reliabilit, consistency, like a real instrument. while stand alone is not my thing, good job, excited for the future!
@Heisenberg2097
4 жыл бұрын
Great!!! In ten years of using the Maschine I had this thought so many times how cool it would be as standalone. Now it is!!! The MASCHINE keeps me fascinated after ten years of ownership on a daily base. WELCOME MY SON... WELCOME TO THE MASCHINE :-D (I think this is not the most usable citation as the authors didn't have the most positive impressions of THE MASCHINE... but hey. At their time there was no MASCHINE anywhere near w)
@maxs9445
4 жыл бұрын
this looks pretty awesome
@uwebaganz5144
4 жыл бұрын
Congratulations Native 😎👍
@m9cao
4 жыл бұрын
days ago I was finding a drum pad controller and that shows up, best choice now absolutely, Maschine+ with the +price.
Пікірлер: 1,4 М.