“It’s pretty powerful, and it does have a lot of power” 😂
@Brandon-mq3tm
3 жыл бұрын
I just got my mast tour pro yesterday. Already used it for a customer and close friend. Absolutely amazing machine. Way comfortable to hold and tattoo with. Great job in review dude!
@blowoutking3511
3 жыл бұрын
Wat voltage did you use ?
@macvalencia8691
2 жыл бұрын
La sigues usando ?
@KarlVinceCasitas
2 жыл бұрын
glad I watched this review, mentioned that these machines dont last long. Would you recommend CNC brand over Dragonhawk?
@mannyhernandez4991
3 жыл бұрын
Whats the proper voltage it should be running on?
@tanyapineda7212
4 жыл бұрын
I can't get over how tiny the cord is! Enjoy your machine reviews & would especially like to see more cartridge & disp grip reviews too. Nice how low you can turn it down. Thank you
@cvetiksemicvetik778
4 жыл бұрын
Where I can buy these cartridges? Thanks
@sevda9919
Жыл бұрын
Hi do u think mast pro is good for lining or permanent make up
@stefanstefchev2986
3 жыл бұрын
Can the machine push large magnums well? Like can it shade with a 23 magnum , does it have the power?
@xXemokitt4yXx
3 жыл бұрын
So any cartilage would work on this ?
@gehyuntt
3 жыл бұрын
Is it better than CNC Q2?
@markruelloteyro9807
4 жыл бұрын
Nice review man. Do you use the same machine for both lining and shading? Or is that possible to use the same machine for both shading and lining in a session? Thanks. Keepsafe.
@tattootheory
4 жыл бұрын
Yes any rotary machine can be used for both lining and shading you just have to adapt to it.
@jesteryugto8449
3 жыл бұрын
I am your subcriber from philipines,and i can speak english a little bt.m i have a question sir.,is this tour mast machine will works longer sir? I what to buy if theyl works longer..thankyou sir
@josecorvuscorax8281
4 жыл бұрын
Thanks for the review. What about the vibration? Does it have a remarkable vibration that can affect the hand or the work?
@tattootheory
4 жыл бұрын
Jose Pitdog vibration is very minimal but honestly these machines don't last very long. Few months at most.
@leviburns89
3 жыл бұрын
@@tattootheory what goes wrong with them? From what I can see, they may have heating issues and the motor goes
@tattootheory
3 жыл бұрын
Vu Nguyen electric motors can be faulty some can break with ease over time, it all depends on the individual motor and how much work it's put through. I've had shitty machines last longer than some real expensive ones and vice versa.
@Bruce_Quin
2 жыл бұрын
Great review, thanks!
@aktv288
3 жыл бұрын
I am contemplating (on a budget) to get the Dragonhawk Atom, Dragonhawk Mast Tour or Mast Tour Pro or the Dragonhawk Mast Flex . I am from New Zealand and dont have CNC in our country atm any advice would be greatly appreciated . Will do Traditional/Script and Black and Grey Majority
@tattootheory
3 жыл бұрын
Mast tour pro is good.
@aktv288
3 жыл бұрын
@@tattootheory if not the pro which one from the flex mast tour (not pro) and atom? i appreciate your reply. sending love from New Zealand
@tattootheory
3 жыл бұрын
@@aktv288 I’m not familiar with the other mast machines I’ve never tried them. As far as the atom I recommend critical power supplies.
@aktv288
3 жыл бұрын
@@tattootheory You the man, thanks for replying bro means alot!!!
@ticesine6589
2 жыл бұрын
I just got one of these and can't really figure out how to adjust the needle depth. I've used the twist settings on the machine but it doesn't look like anything is changing
@tattootheory
2 жыл бұрын
Insert the cartridge into the grip then turn the grip to adjust needle depth you need to have your machine turned on to see the needle depth while turning the grip.
@graffics7665
4 жыл бұрын
Does this mast tour pro have a faulhaber motor? Everywhere I've searched, even on the Dragonhawk website, it says the motor is "imported from Germany"- but no mention anywhere of faulhaber. I would assume if they used a faulhaber they would want to let it be known. I really wanted this pen but I'm leaning towards the CNC Q2 or Q3 because they specify that they have a Faulhaber motor.
@tattootheory
4 жыл бұрын
Aaron Graff honestly who the fuck knows what motor it is. Buy a q2 best small short pen style machine I’ve ever used from China.
@graffics7665
4 жыл бұрын
@@tattootheory that's exactly what I'm going to buy. Thank you!
@PANDA-PANDA59
3 жыл бұрын
Is the pen still working good ?? I was thinking on getting my daughter one or should I get the cnc grenade?? Thank you
@tattootheory
3 жыл бұрын
Every machine from mast should have a one year warranty and should last as long as that warranty.
@69Boo69boo69
4 жыл бұрын
Is the power supply that comes with CNC q2 good enough to use or should I buy a different one? And which would be good?
@tattootheory
4 жыл бұрын
It does not come with a power supply unless you are getting a kit which I do not recommend. There power supplies are not the greatest.
@rustynoland
3 жыл бұрын
Nice to see other artists following proper sanitation rules! Keep it up
@peterwitting72
3 жыл бұрын
True 🤣😂
@drieyazz1645
3 жыл бұрын
How does this machine compare to the bishop shader or packer? I know the price difference is there. Sometimes a company just places price for name however. I don’t want to spend $800+ for a wireless wand if I can get a machine that does the same quality job for less,thanks in advance!
@tattootheory
3 жыл бұрын
I've never used a wand so I cannot answer that question.
@chuies1314
3 жыл бұрын
I got a dragon hawk pen with the wireless battery but I feel like it just throws the balance off...I use the chords instead.. this pen looks sick and forsure smaller
@AndrewHohn
Ай бұрын
I’m I going threw the same I like a cord better than batterys
@SergioLopez-vu5lv
3 жыл бұрын
Hi can u help I have thunderlord power supply my master pro won't start unless I start at 9 volts then I can go down in volts but when let go of the pedal I have start at 9 volts again my old power supply starts it normal low volkts no problem
@JohnDoe-cq3ii
3 жыл бұрын
Sounds like a issue with the power supply. Ever get it fixed?
@AndrewHohn
Ай бұрын
Do you recommend it? I’m also looking at the cnc q2 short
@tattootheory
Ай бұрын
These already are old generation machines. If you are a beginner I recommend any newer style wireless pen machine from Cnc or DragonHawk, also mummy is very good.
@AndrewHohn
Ай бұрын
@@tattootheorythanks yes I see the new ones don’t have a German motor idk if that’s a deal breaker but the new cnc q2 looks the same idk
@davidwells6556
2 жыл бұрын
My tour max has that german motor, I'll look to see if I can find the info that came with it. I do know it needs a hard start power supply and is 10,000 rpm at 7.5 volts.
@AndrewHohn
Ай бұрын
I didn’t know that the battery’s do that and start high maybe it’s because the motors need that I never heard of it,
@davidwells6556
2 жыл бұрын
Forgot to ask, you think I need a softer hitting machine as well? Thanks.
@tattootheory
2 жыл бұрын
How long have you been tattooing now? I recommend first getting better at tattooing and learning with traditional coil machines is best then stepping up to rotaries. Either way if you need my help I’m here.
@davidwells6556
2 жыл бұрын
@@tattootheory only a couple months but used to work in a tattoo shop for 2 years 1990 and 1991. I'm used to my rotary now so don't want to go back to old machines because i'm in love with this one. Thanks for helping though, most wouldn't. Shows you're a man and not an asshole.
@platinummm2812
3 жыл бұрын
I have a mast tour and can’t get machine to stay on AM I DOING SOMETHING WRONG? please help... I plug it in and light on pen bottom comes on as I increase voltage but machine doesn’t actually come on all the time even with the peddle still doesn’t stay on or come back on I received a replacement machine but kept everything else since that’s all they sent
@M0N0T0N0US
3 жыл бұрын
If the new one is doing the same thing as the old one, then it’s either the pedal or the power supply. I’d recommend to Try an illusionist wireless battery, runs about 7 hours and will run while the usb is plugged in and charging, so no power supply/pedal needed.
@graffics7665
4 жыл бұрын
I have the mast tour & it's super small! It's actually too tiny so I threw a big grip on it & I love it! Without the grip my hand would cramp up. With the battery pack it's very light. I want to get the Mast Saber cordless pen. Check that one out- It looks badass.
@tanyapineda7212
4 жыл бұрын
I'd like to see the cordless pen review too.
@graffics7665
4 жыл бұрын
@@tanyapineda7212 it says you can run the Saber for around 6 hours on battery power then you can also plug it in and use it if the battery dies. It's an awesome concept and a cool looking pen.
@tattootheory
4 жыл бұрын
Aaron Graff it’s a piece of junk the wireless pen that every Chinese manufacturer has. Elite, cnc, dragon hawk, worldwide Tat2 supply. Even ultimate tattoo supply has their own version of it. You want a wireless pen that is bad ass buy an ink machines scorpion or wait for the new sol nova unlimited wireless pen from cheyenne or the mustang tattoo wireless pen.
@tattootheory
4 жыл бұрын
Tanya Pineda it’s a piece of junk don’t buy it
@tanyapineda7212
4 жыл бұрын
@@tattootheory Please review any cordless pens ya get & thank you. Also cartridge reviews & disposable grip w/pushbars are really appreciated. So many brands now it's nice to see the nuances/differences before burying. Super appreciate all your reviews!
@kekkogiardullo
2 жыл бұрын
Hi Bro, do you use this machine ( tour pro pen )for the whole tattoo??? ...For the lines, shades??? Thank you 🙏
@tattootheory
2 жыл бұрын
Hi I don’t use this machine any more bro.
@kekkogiardullo
2 жыл бұрын
@@tattootheory But would you still recommend it? Let me explain: I'm a beginner, the keyenne is expensive , so.. 👍🏻 Thank you so much Bro 🙏🙏🙏see ya
@guillermogonzalezjimenez6800
2 жыл бұрын
i bought it yesterday, i'm waiting for it now :) , is my first ever tatto machine, thanks for your opinion on it bro
@505dukeboi505
3 жыл бұрын
Do you need to oil the engine, or just lubes the adjustment beads?
@tattootheory
3 жыл бұрын
No oil needed
@carloskoorndijk7898
2 жыл бұрын
Just the rubber rings jou see when its open
@sly1972sly
3 жыл бұрын
I have the same machine bro but like to know why it ain't lining at one pass should I use the regular mast needles on it cause even at 8 to 9 volts still not running smooth lines it's like skipping some are lite and some are dark
@tattootheory
3 жыл бұрын
How long have you been tattooing?
@sly1972sly
3 жыл бұрын
@@tattootheory 20 years
@tonybandz5337
2 жыл бұрын
@@sly1972sly capping 😭😭😭
@solekefs626
4 жыл бұрын
Any reviews on it now that you’ve had more time to use?
@tattootheory
4 жыл бұрын
Truebrouce I can say it’s a good little machine that packs a punch and can be used for all forms of tattooing. I still like my cnc q2 better though, just sayin.
@solekefs626
4 жыл бұрын
Vision Knite cool! Iv seen other tattooist give reviews on it and can only say good things about it and as a new tattooist its a good price as most starting out can’t afford the injecktas and Cheyenne’s etc. thanks for the reply!
@bonecosex666
4 жыл бұрын
Hello friend between the CNC q5 and the Mast tour pro, which one do you prefer?
@tattootheory
4 жыл бұрын
TAVO ALVES cnc q2
@lanetadiarionetodeunscratc9439
4 жыл бұрын
Vision Knite is the q5 that bad?
@tattootheory
4 жыл бұрын
La Neta tattoo guide /guía the q5 is fine but I recommend buying the newer version because their are two versions of them with different motors.
@waevataytay
4 жыл бұрын
Does the cartridge has to be mast or wormhole, big wasp can be used or any cartridge ?
@tattootheory
4 жыл бұрын
waeva taytay you can use any cartridge brand
@waevataytay
4 жыл бұрын
@@tattootheory thanku so much, i've been researching online for so long but couldnt find answers !!!!! Your video gave me a slight confirmation !
@zeldas1
3 жыл бұрын
so, does this machine last? i am a semi professional who is looking to trying this pen, will it last?
@tattootheory
3 жыл бұрын
Yes it will.
@jakeanderson4399
4 жыл бұрын
Alright dude have you tried the p1 machine from solong tattoos?
@tattootheory
4 жыл бұрын
No I have not
@jakeanderson4399
4 жыл бұрын
No bother dude looks a good little machine
@davidwells6556
2 жыл бұрын
I have a mast tour max and it hits so hard it's crazy. I'm going to have to buy something else to shade with I think. Not sure I'm just starting out. I got sick a few years ago and recently started tattooing. I need a liver transplant. So I know how it is to be sick bro. My mom died from same problem you have. She got breast cancer and was didn't know until stage 4. She had a 5% chance to live and she got rid of it and it came back 10 years later and got her. So keep your head up, she went through hell but beat it when they said there was no way. She was strong headed and told me she just wanted to see my sisters babies and my babies grow up. She got her wish, she just wanted to see what kind of people they would turn out to be, and remember her. I say babies but my sisters kids were twins and 7 years old, and mine were already 12 and 14. ALL 4 were boys and she saw what kind of men her grandchildren were. It's all about mental strength and you seem to have plenty. I wish nothing but the best for you and think you'll do just fine.
@louiseborruat8313
4 жыл бұрын
do you recommend it for thick lining? thx btw for the video!!
@tattootheory
4 жыл бұрын
Louise Borruat it can line with any size liner. But then again I can line bold lines with any machine so it’s really the artist not so much the machine.
@irfanyuksel1392
3 жыл бұрын
if you compare that machine with cheyenne thunder what would you say?
@tattootheory
3 жыл бұрын
Sorry my earlier comment was for a different review lol. The thunder is a much better machine I used one for 5 years never failed on me and worked super.
@irfanyuksel1392
3 жыл бұрын
@@tattootheory i use spirit generally but i needed your opinion to buy a mast tour Pen. As you know spirit not perfect for lining and coloring soft areas
@tattootheory
3 жыл бұрын
@@irfanyuksel1392 I’d recommend getting a thunder instead.
@themmacircle7645
4 жыл бұрын
I tried out the Mast Zion the other day. Wasn't worth it. That machine is weak. Says it has a Faulhaber motor too but it wouldn't even push a 5rl at 8 volts.
@wickedgame4170
4 жыл бұрын
The MMA Circle i saw your review on amazon. Its defect.. Send it back and get a new one 😂
@themmacircle7645
4 жыл бұрын
@@wickedgame4170 I sent it back immediately but why the hell would I buy a new one? I just bought another q2 for $10 more. A proven machine that's pretty good at everything.
@frio1026
4 жыл бұрын
@@themmacircle7645 what is the Q2 machine?
@themmacircle7645
4 жыл бұрын
@@frio1026 the CNC q2 on Amazon.
@frio1026
4 жыл бұрын
Cool Thanks I ended up buying the Cheyenne mast pro tour thanks
@noeltorres6682
3 жыл бұрын
Hey guys please help I need your opinion, undecided Mast tour pro vs Mast Nano ?!? Size vs power !
@tattootheory
3 жыл бұрын
Ok the mast nano has a magnetic connection so using wireless power supplies with it is not possible. The tour pro uses RCA and is a pretty damn good machine
@jakeanderson4399
4 жыл бұрын
I got a box of wax cartridges off them and tbh I really like them they are good, I love the shape of them, didn’t know they done sponsorship though lol
@tattootheory
4 жыл бұрын
Not sure what wax Cartridges are
@jakeanderson1173
4 жыл бұрын
@@tattootheory sorry was meant to wipe wjx dam auto correct changed it lol
@theconfusingwords
4 жыл бұрын
What power supply do you use with it?
@tattootheory
4 жыл бұрын
Hilary Bezona any good power supply works. I recommend critical but there are many others that will work fine. Are you looking for a power supply?
@theconfusingwords
4 жыл бұрын
Vision Knite yes I am, I’m in the market for one right now
Vision Knite thanks so much! I ordered it in pink! It looks perfect for me, appreciate it
@theconfusingwords
4 жыл бұрын
Vision Knite ok, I’m still shopping for a pen now though. I was on the fence about this pen but now I’m looking at your comments. It died after five tattoos? Your cnc q2 you prefer? I rather spend 20$ more and get the cnc q2 if it’s that much better
@samkavaman1980
4 жыл бұрын
That hat though..... good review
@killacoiler1707
4 жыл бұрын
They both run Faulhaber flat motors from what I can gather. My question is, are there any distinct build quality differences that jump out at you that may sway your choosing one over the other? I know you stated you aren't about doing head to head comparisons but I am looking to make a single purchase and want something that I know is going to hold up under extensive shop use while apprenticing. I have used the regular mast and find it to be ergonomically comfortable but I am not going to trust it for a daily driver in a shop environment. I am on a budget and can't really afford to dish out the money for an FK Irons or other top tier pen at the moment and even if I could afford one the question is what makes it better than a 200 dollar machine running a Swiss Faulhaber motor? I see the CNC with excellent reviews and like that they tell you for sure what company's motor it runs, that said the Dragonhawk machines have a mixed bag of reviews across their lineup and while it says German made motor is it a Faulhaber or is it random stuff and the German origin is used as a marketing cue over an Asian made motor? Figure if you have any time logged with both units that maybe you could shed some deeper light on suitability of use for a daily driver. Thanks and love the raw and uncut nature of your reviews.
@tattootheory
4 жыл бұрын
Killa Coiler my mast tour pro died after 5 tattoos my cnc q2 short pen is still running strong almost 1 year. I think that tells you something.
@killacoiler1707
4 жыл бұрын
@@tattootheorythat information is much appreciated. I will go CNC then. like I said I am entering into a fulltime apprenticeship and want a device that is going to withstand a shop environment and these were the two machines I had set my sights on based upon features size and budget constraints. Thanks for saving me from a catastrophe.
@tattootheory
4 жыл бұрын
Killa Coiler you will not be disappointed with the cnc q2 it will last forever if treated properly. If you have any more questions please feel free to ask.
@killacoiler1707
4 жыл бұрын
@@tattootheoryDo you have any suggestions on voltages for lining and shading? With the regular mast pen, I have been lining at 6.5-8 volts depending on the cartridge configuration. Then for shading, I run at 4.5 to 6 volts depending again on the cartridge's needle configuration. That is using the Dragonhawk power supply that came in the kit with the pen. I have a Monster Point analog power supply that I will use with the CNC short pen and was wondering what voltage you run yours at, so I have a starting point to go off of.
@tattootheory
4 жыл бұрын
Killa Coiler my first recommendation to you is to get a good solid power supply don’t use the cheap Chinese power supplies as they do not provide consistent current. I very highly recommend either a critical or a musutoku power unit. As far as voltage goes I like to line at high speeds but it also depends on my needle configuration.
@raulfranciscosantacruzcoro7947
2 жыл бұрын
Hi, man sorry what kind of power supply should i buy for this machine? Or use the one that comes with it on amazon? and should i buy a foot pedal? Im new to this
@remone2013
4 жыл бұрын
How would you clean these?
@Creepypandaification
3 жыл бұрын
Iv been asking the same, most say wrap up, clean each part with madacide or viraclean.
@2animegirl
3 жыл бұрын
How long do you think this machine can last?
@tattootheory
3 жыл бұрын
It has a one year warranty. But any machine that utilizes a DC motor can break but most can last several years.
@2animegirl
3 жыл бұрын
@@tattootheory thanks! Just ordered it to check it out, depending on how it works I may switch later to Cheyenne or Bishop 💕✨
@tattootheory
3 жыл бұрын
@@2animegirl I recommend Neuma. The Neuma 4 is the best machine I've ever used. Go watch my videos on it. There are several on my channel.
@sijanmagar7286
2 жыл бұрын
@@2animegirl so how long did it last? and is it worth money?
@alkatraz706
4 жыл бұрын
1:56 "let's turn it on" Bbrrrrmmmm! Dude I thought ur running ur machine trough a gas powered generator 😂 Nice review.. new sub here
@tattootheory
4 жыл бұрын
al katraz lemurs have brains inside rhinoceros lumps 😜
@thebearstreetballs
4 жыл бұрын
Mine won’t run with a cart in it unless it’s at like 8volts and then I can turn it down. Is that normal??
@sionwins2258
4 жыл бұрын
same problem here
@thebearstreetballs
4 жыл бұрын
Sion Wins I’ve noticed it only starts with lower grouping cartridges in it. I use 9rs and up for lining so I might try the cnc machine see if that thing will push
@thebearstreetballs
4 жыл бұрын
Sion Wins this thing seems to only work with cheap cartridges and I’m not about to use some cheap carts lol
@sionwins2258
4 жыл бұрын
@@thebearstreetballs i tried it with the dragonhawk mini supply and it worked properly from 3 volts to 10 without problem..I believe the problem is in the power supply and not in the cartridges..
@thebearstreetballs
4 жыл бұрын
Sion Wins yea I think you’re right actually it was fine with my battery packs too. It wasn’t working with the Bronc power supply I have so yea maybe it’s the supply
@subwooferroads
4 жыл бұрын
Review mast shuttle please bro
@tattootheory
4 жыл бұрын
Sam Robinson not reviewing anymore machines or anything from dragon hawk they are shit!!!
@drbepis3606
4 жыл бұрын
@@tattootheory hey what's happened it doesn't work yet? I'm beginner and I'm looking to buy new tattoo pen to practice...
@tattootheory
4 жыл бұрын
Dr Bepis what doesn’t work yet?
@subwooferroads
4 жыл бұрын
Cheers bro thanks for the review lol
@drbepis3606
4 жыл бұрын
@@tattootheory You wrote now dragonhawk machine don't work anymore, right?
@patrickolsen1525
3 жыл бұрын
Its pretty powerful, it has a lot of power. Lmao. No hate. Just funny.
Пікірлер: 155