YEA DAN THANK YOU I LOVE THE COLOR OF UR SHIRT UR AMAZING
@BoilerDan1
7 ай бұрын
😂👍 I don’t think I have ever been complimented on my wardrobe 😂. Thanks for watching. I’m very happy with the airbrush, but I don’t use it for artistic expression. Mostly use it for shadowing on my wooden ship modeling.
@user-oc4ft4tu7w
7 ай бұрын
Thanks Dan. Happy New Year's, I watched your video. I got a master airbrush kit for Christmas and I cannot wait to use mine. I will definitely watch more of your videos.😊
@BoilerDan1
7 ай бұрын
I think you will enjoy your airbrush! I don’t see me using mine as most people do. I use it mostly for shadowing effects on my model ships. It works great and I’m very pleased with it. You should check out other KZitem tutorials on airbrushing techniques as I’m just learning about them myself 😂👍 Thanks for watching and taking the time to comment.👍👍
@Cereal_Killr
5 ай бұрын
Bought this kit for 129 bucks on amazon! KILLER deal! Loving it and too just getting into hobby for my RC carsa and 3D printed models! Kit is perfect and works REALLY good for a budget setup.
@BoilerDan1
5 ай бұрын
Yep, a good deal. I basically use mine for shading on model ships, but I’m sure you’ll be able to do a lot more! Thanks for watching and sharing your experience.👍👍
@hotdirtdog
3 ай бұрын
aweesome video dan
@BoilerDan1
3 ай бұрын
Thanks, I’m no airbrush expert, but for my needs this has worked out well for me! I need more experience in keeping it clean as the nozzle needs to be clean for best results. That being said, I’ve had no major issues and enjoy using it. Mostly just shadows on my wooden model ships, but I’ve used it to paint the inner hull on 2 skiff boat with great results. Thanks for watching and taking the time to comment.👍👍
@allboutcashmusic
5 күн бұрын
@@BoilerDan1 what did you set your PSI to?
@BoilerDan1
4 күн бұрын
@allboutcashmusic I run mine at a low setting (tank at 23 psi and the spray rate maintains a consistent 20psi on the gauge. I maxed it out and the gauge goes to 60psi in the tank. When spraying it then maintains about 30psi continuous spraying. Hope that answers your question.
@sleepyfish959
Жыл бұрын
thanks for the nudge. I have had an airbrush setup for some time but never set it up. Todays project just changed
@BoilerDan1
Жыл бұрын
Ha. I’m still studying on how to use it! I also am dealing with a minor disaster! I inadvertently plugged the ships light system into the wrong transformer 😵💫. Burned out two of the three back of the ship lanterns 😩. I was able to access the wires but had to deconstruct a little. Just hooked up the lights, now rebuilding the back arch…..🤪…. Hobbies are great for learning so many things 😉. Hope you enjoy your airbrushing adventure!
@stevestammet1616
8 ай бұрын
Thanks Dan! Mine comes today from Amazon and I needed to see the unboxing. It's exactly what I needed! THANK YOU! So much for making this video! I am very excited as a new air brush artist w/ no experience. I have been doing acrylic pour painting and want to try to integrate air brush techniques to enhance my projects/work. Thanks Again! Cool video!
@BoilerDan1
8 ай бұрын
I think you will really enjoy it! I practiced with distilled water in the beginning 😂👍
@ruffleboomboom1987
8 ай бұрын
Right?!? This was prefect
@ruffleboomboom1987
8 ай бұрын
Thank you so much. I really appreciate this video. You answered every question I was about to Google.
@BoilerDan1
8 ай бұрын
You’re welcome. I should do a follow-up video! I’m very happy with the airbrush. Although I’m not a skilled airbrush user, however I’m using it in model ship building to add shadowing. It’s fun to use, just takes a little practice. So far I’ve not had any negative issues.
@soulbrother3299
5 ай бұрын
Thanks! My man!!!😂😂😂😂😂😂😂
@mathieu9789
Жыл бұрын
Thanks for the video. Much appreciated
@BoilerDan1
Жыл бұрын
You’re welcome. I’m just getting started using it, and I’m by no means proficient in using it. However I’m extremely pleased so far in that it works great for shading in my hobby of building wooden model ships. I was able to darken a lower deck that should have been stained darker. So in that application it saved the day! Thanks for the positive feedback. 👍
@sub04aru
Жыл бұрын
I used to primarily like working with plastic kits. I haaaaaaated painting. It just seemed like too much setup and cleaning time and it made me hesitant to build. I researched airbrush kits for a long time thinking maybe it would make life easier. Well, I never got around to it because I discovered wooden model ships with A LOT less painting. I will be interested to see how you get along with the airbrush kit. See how much easier your life goes compared to brush painting. Maybe you can persuade me to invest in an airbrush kit. Good luck.
@BoilerDan1
Жыл бұрын
I hope to use it sparingly. As an example, after I stained the grate’s on the main deck, they look too new. I’m thinking I can dust them with a mist of dark paint in a random pattern. In my earlier Pearl model I wasn’t happy with brush painting the figures and hopefully I can use it for some of the combined with brushing. I’m even thinking that I could kind of shadow parts of the sails? It may end up a complete failure too! Stay tuned 😂. I’m about to finish the first pole (instruction book) and will post another segment.👍
@keyper555
7 ай бұрын
Just got done testing out my Master Kit SP7B 20 2 kit painting spoons, boy have I got some learning to do, I just got back into building 1/24th scale car models and always used rattle cans in the past but never got the results I was looking for, today I tested a few different paints cleaning AB very well before changing colors, things were going good till the paint stopped flowing. I tried this and that, cleaned and cleaned still would work intermittently, ARGH!!! So being how I am lol, I tore the damn AB apart and cleaned her out good, learned some stuff too. I think the black paint I used was the culprit, anyhow I think I got her clean now, but all this trouble kicked my old ass for now, will attack it again tomorrow, hopefully I will have better luck, I know its a learning curve and I am very curvy at this point and thats why and how I found your video, been watchin a ton of vids for two weeks now learning alot of stuff but no one was using the kit we both have. Sorry for the long post but I had alot to say. Onward and upward right?
@BoilerDan1
7 ай бұрын
We’re in the same boat 😂. I’m no expert, but try thinning the paint. Play with it on non-important surfaces. I’m getting better each try, but yes it’s a challenge. I hope you succeed 👍👍
@keyper555
7 ай бұрын
@@BoilerDan1 WOW Quick reply, thanks. Yes been thinning most of the attempts, some straight out of bottle then thinning them down just experimenting with different paints and have to almost thin them all. Its just learning so many things at the same time. I will keep at it till I figure out whats right and wrong and watchin more videos. Painting spoons right now and got some really good results, played with the clear coat too, very nice. I seen some of your work on the boats, NICE! My dad was a HO model railroader, he had a HUGE layout, 3/4 of our basement, it was a major setup. He was very into the detail and built most of his cars and engines, all nickle individual track rails, hundreds of switches and miles of wire, if only I had pictures, but I grew up with that and took it all for granted and in the 60's cameras were not something I thought about. Well Onward and upward.
@BoilerDan1
7 ай бұрын
@keyper555 sounds like you are well on your way. Good memories of your growing up too❤️
@aldarko9487
6 ай бұрын
thanks~
@BoilerDan1
6 ай бұрын
Wish I could be more informative, but I’m a true beginner. I’m using it mostly in shadowing in model ship building.
@kaebee23
Жыл бұрын
Thank you 😊
@BoilerDan1
Жыл бұрын
Your welcome. Since posting this video, I have begun using the airbrush. It’s working well for my needs. I’m using it to make shadowing effects on model ships (The Black Pearl). I’ve also made rust stains on a couple of shrimp boats. I’m very happy with ISP far. Thanks for watching 👍
@user-pf9sc6ug7f
5 ай бұрын
Do you have to put water inthe machine?
@BoilerDan1
5 ай бұрын
No. But you do add a water based thinner to the paint. There’s a little container that holds the paint attached to the airbrush pen like thing at the end of the hose. The machine is a small air compressor.
@obeysonic42013
7 ай бұрын
Awesome video are you able to paint metal with this kit? Bikes, cars, ext.
@BoilerDan1
7 ай бұрын
I think you’d be better off for larger scale projects like you described. Get a small air compressor and a paint gun. You might be able to use it on a bicycle but you’ll need to use an oil based paint and I’m not sure if this type airbrush would work with oil based paints.. I use water based acrylic paint.
@soulbrother3299
5 ай бұрын
I just got mine today..I'll use it for sneakers..sad thing can't play around with it fir at least two weeks...
@BoilerDan1
5 ай бұрын
That’s like having to miss Christmas morning! 🥲. If you have artistic talent, you’ll absolutely love it. Cleaning it is an art form unto itself, but it’s just the needle parts. I’m still using it for shadowing, but someday I’ll expand my skills…. Maybe paint my (what is old people call them) tennis shoes 😂 Thanks for watching.
@soulbrother3299
5 ай бұрын
@@BoilerDan1 right tennises...yyyyo I laughed out load you ok with me sir!!! I needed that. You'll be the first to know..im a master finisher at drywall! Plus I paint..on a job now..that's why I said at least two weeks out..? Maybe longer....tennis shoes...man I needed dat laugh
@BoilerDan1
5 ай бұрын
@soulbrother3299 I think we just shared a moment across generations and cultures! Thanks for sharing as well as your SUPER THANKS gift 😃. All funds roll back into my hobby and are much appreciated 👍🎉👍
@soulbrother3299
5 ай бұрын
@@BoilerDan1 it's a pleasure good sir
@wonka2112
Жыл бұрын
Cool! Looking forward to some videos with this. And no, the sound / noise, is nothing to worry about video production wise. Let 'er rip Dan! 👍
@BoilerDan1
Жыл бұрын
I’ve got inside my head of building the Dying Gull almost from scratch and using airbrushing some parts to age it. Not a large ship, just taking the hull of one of those cheap ones and build from there. But that’s way out there. Near term I’m planning on using it to do parts of the miniature Pirates for the current build.
@wonka2112
Жыл бұрын
@@BoilerDan1 Yes, that would be really nice to let your creative side explore.
@jmaddib9219
Жыл бұрын
Hi, unrelated question from the air compressor….I have a 1/96 scale Harvey model, my 3rd build on the cheap kits. What type, size, color threads, etc. do you recommend to use for rigging this scale?
@BoilerDan1
Жыл бұрын
I’m by no means an expert on the topic. But on a similar ship I went to my local Hobby Lobby store and purchased SEW-OLOGY 1254242 (black) extra strong upholstery thread. It also comes in several colors. Only $2.99 . I’ve been happy with it on the smaller ships. And the price is great too! Thanks for watching.
@jmaddib9219
Жыл бұрын
Hi, have you tried out the compressor, airbrush? I am looking to purchase and curious on your view, thanks.
@BoilerDan1
Жыл бұрын
Not very much as of yet. My plans are mostly to use it for creating shadowing effects. I’ve never used one before so I’ve started out trying to get a feel of it. And trying to remember to start with air and end with air….. I’m sure that comes with experience. I will post something, but it’ll be several weeks from now. I appreciate your watching but for now check out some other tutorials on KZitem! As far as the unit and airbrushes in the kit, I’m very pleased, but I’m a total beginner 👍
@ekko9397
Жыл бұрын
Just got one. How do you move the pressure regulator? I can't seem to get it to move.
@BoilerDan1
Жыл бұрын
Lift it upwards, then turn the knob to increase pressure or decrease the pressure. Then push the knob back down to operate. Thanks for watching! Although I don’t have the skills to use it for artistic work, it’s great for shading on my wooden model ships!
@BoilerDan1
Жыл бұрын
To be a little more specific: There is a black knob above the glass moisture collector jar. You pull upwards on the black knob. It will make a clicking sound and move about 1/4 inch or so. Then you can change the pressure by twisting it to increase (to the right) or decrease (to the left).
@ekko9397
Жыл бұрын
@@BoilerDan1 Thank you so much! I got it. It was very stiff to pull up. I can't wait to try it on my wood carvings! Thanks again!
@BoilerDan1
Жыл бұрын
I think you will like it for wood carvings. My ships are all wood and I can make subtle dark shading that looks authentic wear to the wood. But it takes a little practice with starting and finishing with air flowing so you don’t have paint dry inside the gun…. But you can take it apart and clean it too. Thanks for letting me know I was helpful 👍👍
@dreamabell-tr9cc
11 ай бұрын
How do you like the master air brush kit.
@BoilerDan1
11 ай бұрын
I’m definitely a novice when it comes to airbrushing. That being said, I’m enjoying using it. But so far I’ve just used it to shadow different projects. Darkening corners of my work on wooden model ships. Most recently I used it on the stand for the ship. I had copper leafed the base, aged it and then used the airbrush to create darker areas in cracks and crevices. For all that it’s worked very well. I’ve taken the sprayer apart to deep clean it a few times with no difficulty. That’s a bit of pain but probably standard procedure for airbrushing. Overall I’m very happy with the results and quality of the product. 👍👍
@diannebyrd6635
Жыл бұрын
why did you skip the assembly process video is irrelevant
@BoilerDan1
Жыл бұрын
Sorry, when I get all caught up, I’ll try to update.
@markh4473
Жыл бұрын
Other than the airbrush holder and hooking up the airline there is no assembly. It’s pretty much ready to go once you unpack it. I bought the same kit for pretty much the same reasons, I just got back into scale modeling and wanted a way to paint them without brush strokes
@BoilerDan1
Жыл бұрын
I had no experience with airbrushing…. But it’s working great to create shadows for my ship modeling. I also used it successfully to create rust stains on a shrimp boat model. Some time when I get caught up, I’ll make a follow up video. Thanks for helping clarify the airbrush product.👍👍
Пікірлер: 57