Next Video in this series: Navigating MP3 Files with Rotary Encoder | MP3 Player Project Series: kzitem.info/news/bejne/k554tHd8sqGmfY4
@richardphillips1891
20 күн бұрын
Great series and helpful information regarding editing features, formatting SD card and mp3 information, and as usual, helpful programming tips. Thank you.
@grayeagle247
2 ай бұрын
With this device, can I add 100 W amp and a larger speaker? Thank you in advance.
@kind_Nictus
6 ай бұрын
what mp3 player to use if u want to use for example 12w speakers, or even more?
@thelastoutpostworkshop
6 ай бұрын
The same but with an amplifier board
@udeolisachukwudalu1309
6 ай бұрын
Is there a functionality where you can directly access a music you want to play with the press of a button? I dont mean jumping to the next music, rather i want to be able to access any music file not minding its position on the file list.
@thelastoutpostworkshop
6 ай бұрын
You can access any music using its index number, but it will be hard with just on button
@udeolisachukwudalu1309
6 ай бұрын
@@thelastoutpostworkshop so I can use matrix keypad
@thelastoutpostworkshop
6 ай бұрын
I think so
@garyschultz253
9 күн бұрын
"Speaker must be 3 watts or less" ? Wattage is what the speaker can handle ! Less could damage the speaker. Impedance is what you need to watch. The Speaker must be 8 ohm's or more.
@CalvinGentry-o6r
9 ай бұрын
How do I Reset when i want to stop a song thats already playing
@davidjesky
8 ай бұрын
Excellently done. I appreciate all the time you spent here and well documented as well. Thanks!
@albafleutot3944
7 ай бұрын
Thank you so much !! I've been trying to make DFPlayer work for days ! I'm so happy I found your channel haha
@alaeddingarraoui4538
4 ай бұрын
I can't thank you enough man !!! you made my night here .. I tried a bunch of tutorials on KZitem before this one but they didn't work, and with yours, it worked for the first time. THANK YOU A LOT!
@leeskelton9715
Жыл бұрын
Thank you very much for this. Complete beginner here and I managed ( eventually ) to get this working thanks to your detailed tutorial. I wondered if you have another tutorial on adding a PIR sensor so that it plays the themes when movement is detected? Thanks again and kind regards
@thelastoutpostworkshop
Жыл бұрын
Thanks a lot for your feedback, I do not have a tutorial with a PIR sensor, I will add it to the list!
@SWAFanPilot
22 күн бұрын
My sounds are playing twice for some reason, and usually won't play in sequence. Some play twice and some don't. Some play in sequence and some don't.
@tk2097
Ай бұрын
Thanks this is great you are a good teacher. Can you explain how I would use this with a display (displayA) if I wanted to trigger the MP3 at specific times during the countdown one when the countdown starts, two at 10 seconds, one when the countdown finishes?
@imarobodude
3 ай бұрын
I'm confused why nobody ever says what impedance of speaker this can handle; as if they think 3 Watt tells me anything? It makes NO difference if the speaker can handle more than 3 Watt since DFPlayer will never get that high so it will never care that your speaker can handle more than that. I get the hint people don't comprehend that the speaker is not sending power back to the driver. But I DO need to know whether you have 4, 8, maybe 16 ohm speaker ??
@YasirFaur
Жыл бұрын
Thank you very much. Please note that you should use a 3W speaker or one with lower power rating. If you don't have a 3W speaker, you can use a 5W speaker with a series resistor (20 ohms or more), and it can work, as I have done.
@UliSpalthoff
7 ай бұрын
Isn't the load to the amplifier defined by the Ohms rating, not by the power rating? afaik, The speaker power just tells which power the speaker can handle without distorting sound too much.
@trevo2686
3 ай бұрын
Hey im going to try and get in contact with you. I'm trying to connect my arduino to a gp2040-ce. It's for a custom fightstick. You seem to know a lot about this. I'm trying to get my fightstick to play the jurassic park theme song when I turn it on. (if I could add sound to the buttons when I pushed them that would be cool too)
@vasunirawdekar8056
27 күн бұрын
how do i use push button configuration , like if i press button it will start playing and after it ends it will stop unless n untill i push the button again to listen
@thatotherguyontv
5 ай бұрын
Just worked through an issue I had with this board, one that others may also have, so I thought I'd share. Everything was connected correctly, the code was implemented and uploaded. But the only serial output was "MP3 Player Online." After messing around with the code and it still not working, I switched out my Arduino Nano for an Uno, and that instantly fixed the problem. I think my Nano is an older model, without an ESP32. So check for microcontroller compatbility! Otherwise, a great tutorial and header file. Thanks!
@thelastoutpostworkshop
5 ай бұрын
Thanks for sharing
@Madmaxkkb
5 ай бұрын
Brother I the got same problem but then I used an external battery to power the df player and it worked in my case
@drz400
Жыл бұрын
Thank you! The test was successful.Your header file was helpful. I will modify some toys.
@benedictpng1343
4 ай бұрын
Can you make a video using microbit for dfplayer
@ruiguedes4789
Күн бұрын
Hello friend thanks for sharing this touturial but I have a question for this module is " 3.0 right "you used mp3tf16.h ,I use DfRobotDFPlayerMini.h but is not good,and my display p10 shutdown,and order songs not the same when I used DFrobot Dfplayer mini.h. You can tell me why please 😉
@thelastoutpostworkshop
Күн бұрын
mp3tf16.h is just a wrapper for DfRobotDFPlayerMini.h to make it easier to use. DfRobotDFPlayerMini.h is no longer maintained and has some issues. I tried to find an alternative with no luck. But the code should work, make sure the pins used in this project are not reserved in your development board.
@ruiguedes4789
13 сағат бұрын
@@thelastoutpostworkshop hello friend well pins be ok because for me work perfect and for my friend no , I have module red light and my friend have blue light have some Diference?
@eddiejones8709
Жыл бұрын
Great Video. As you, I was having problems getting my player to play all the files after formatting my disk using WIN10. I found that if you don't use the quick format your MP3 player will play all of you files. I have about 700 songs on a disk and by using the randomALL command it plays all of the songs loaded. Also, I don't any number or folders assigned to the songs. Hope this helps.
@thelastoutpostworkshop
Жыл бұрын
Thanks for the tip
@davidrose1278
9 ай бұрын
Im getting a undefined reference to 'DFRobotDFPlayerMini::volume(unsigned char)' 'DFRobotDFPlayerMini::play(int)',etc.
@thelastoutpostworkshop
9 ай бұрын
Did you install the library DFRobotDFPlayerMini from the Arduino IDE library manager ?
@nandhakishore8439
Ай бұрын
Thanks a lott!! It's working but it's not playing few audio files even though they are wav
@thelastoutpostworkshop
Ай бұрын
Try converting them to MP3
@plantor0728
5 ай бұрын
I KID YOU NOT I HAVE BEEN TRYING TO GET THIS STUPID PIECE TO WORK FOR 3 DAYS THANK YOU!!!!!!!! MY TORTURE IS FINALLY OVER
@plantor0728
5 ай бұрын
now all I have to do now is find a way to play it by using an ir remote
@theforestrealm8783
4 ай бұрын
Hello this is a very good video 👍 but it says that in the mp3tf16p.h file that there is no file called software serial.h if you could help me that would be amazing. Btw you have a new subscriber
@thelastoutpostworkshop
4 ай бұрын
Thanks, you mean you have a compile error ?
@Symboter
5 ай бұрын
Did you experience different speed of playback using more than one of modules? I hooked up three of them, Start them simultaneously, same as cards, same file and they start synchronous, but drift about 1 sec within 6 minutes playback. So speed of playback is not identical on these modules, good only for doorbells, but not for serious applications, or?
@thelastoutpostworkshop
5 ай бұрын
I never tried with more than one module
@marckerger
6 ай бұрын
how can I use your script on a board with hardware serial1 ? mine does not support softwareserial
@thelastoutpostworkshop
6 ай бұрын
Here’s how you can modify the MP3Player class to use a hardware serial port instead of a software serial one. The changes mainly involve removing the SoftwareSerial object and assuming you will use a predefined hardware serial port for communication with the DFPlayer Mini module: #include "Arduino.h" #include "DFRobotDFPlayerMini.h" #define MP3_ERROR_ONLY 1 #define MP3_ALL_MESSAGE 2 class MP3Player { private: HardwareSerial *mySerial; // Pointer to HardwareSerial instead of SoftwareSerial void statusOnSerial(uint8_t type, int value); void waitPlayIsTerminated(void); public: DFRobotDFPlayerMini player; // Constructor now takes a reference to a HardwareSerial object MP3Player(HardwareSerial &serialPort); ~MP3Player(); void playTrackNumber(int trackNumber, int volume, boolean waitPlayTerminated = true); boolean playCompleted(void); void initialize(void); int serialPrintStatus(int errorOnly); }; // Constructor implementation changed to initialize the HardwareSerial reference MP3Player::MP3Player(HardwareSerial &serialPort) : mySerial(&serialPort) { } MP3Player::~MP3Player() { } void MP3Player::initialize(void) { mySerial->begin(9600); Serial.println(F("Initializing MP3Player ...")); if (!player.begin(*mySerial,true,false)) // Use the HardwareSerial reference { Serial.println(F("Unable to begin:")); Serial.println(F("1.Please recheck the connection!")); Serial.println(F("2.Please insert the SD card!")); while (true) ; } player.volume(10); Serial.println(F("MP3Player online.")); } // The rest of the implementation remains the same...
@theveteranworkshop8328
Жыл бұрын
Great video, what if I want to have a total of about 20 sounds playing with a delay in between. Do I need to number each out with a delay command in between? Or is there a way to make the code shorter?
@thelastoutpostworkshop
Жыл бұрын
You just have to put them into a for-loop and insert a delay like this : int volumeLevel = 20; int trackCount = mp3.player.readFileCounts(); for (int i = 1; i
@jindagar
Жыл бұрын
how can we configure this in to a sound fx board i.e. pressing a certain button plays a certain sound?
@thelastoutpostworkshop
Жыл бұрын
I will do it in a future video with a rotary encoder
@mercedespautassi9978
5 ай бұрын
Good morning, I am trying to compile the sketch, but it keeps saying that I don't have the SoftwareSerial.h file, which I actually do have. And the times that it does compile the sketch, it says that I don't have another .h file that I guess the SoftwareSerial.h file is calling. What can I do? Another problem I've been havign is that the esp32 doesn't even detect the module, i've rechecked the conections a lot, but they are all correct. Also, the module i have is a clone, it isn't exactly the same hardware, do you know where I can get info about this? The place I bought the module from doesn't have any info about DFPlayer Mini's clones.
@sam-e6h5o
6 ай бұрын
I've checked my wiring, and every time I plug the mp3 player in, the lights on the Arduino turn off, do you have any idea what is happening.
@Hafizsamsung-h6m
2 ай бұрын
Short
@Sunnystew222
Ай бұрын
You are short circuiting your Arduino
@Hafizsamsung-h6m
Ай бұрын
@@sam-e6h5o Maybe your MP3 player has a short circuit or you installed the polarity in reverse
@jeffbornes3986
9 ай бұрын
Nice Video... thank you
@LIMFANGQUAN
Жыл бұрын
Thanks a lot. This video really helps me! After i format my SD card the mp3 player finally works!
@thelastoutpostworkshop
Жыл бұрын
You're welcome!
@leeskelton9715
10 ай бұрын
Hello and thank you for fantastic content. I just wanted to ask if you may have found a way of adding a PIR sensor to this as yet? I have a great little Sith Wayfinder star wars project that I’d like to add sound, activated by a sensor when you enter the room. Kind regards
@thelastoutpostworkshop
10 ай бұрын
It is still on my list, choice are hard to make! Anyone else would like to have tutorial a PIR sensor with the MP3 module ?
@leeskelton9715
10 ай бұрын
@@thelastoutpostworkshop fingers crossed 🙏🏻😄
@judgeworks3687
7 ай бұрын
I’d love a tutorial on using PIR sensor to trigger sound/tracks
@leeskelton9715
7 ай бұрын
@@judgeworks3687 , thanks 👍
@DatFunnyPerson
7 ай бұрын
Thank you for the Tutorial. In my case I have like 10 Songs as mp3 on my card and i would love the songs to shuffle whenever i turn my arudino on. So it plays a random song. any idea? I have zero idea how to code btw ^^ lol
@121sarveshwarvec8
6 ай бұрын
Can we play specific audio , when it is mapped with some buttons
@thelastoutpostworkshop
6 ай бұрын
Sure you can do that, you just have to create a function for each button that will be called when they are pressed, inside each function call the play function to play the audio file
@MrWesleyruff
Жыл бұрын
Thank you! This helped me get my MP3-TF-16P V3.0 up and running!👍👍
@thelastoutpostworkshop
Жыл бұрын
Great to hear!
@АнастасіяПолюхович-м5з
3 ай бұрын
Good evening, I'm trying to start the player but it says MP3 online, but nothing works, what could be the error? Can you help me please?
@thelastoutpostworkshop
3 ай бұрын
Reeheck your wiring. Make sure the TX and RX pin are not reversed. Do you have any error message on the serial monitor when playing a sound file ?
@АнастасіяПолюхович-м5з
3 ай бұрын
@@thelastoutpostworkshop no, nothing appears. Everything is connected correctly, there are no errors. I would attach a photo here, but this is impossible. Can we write to each other somewhere on social networks? I will be very grateful to you!!!🙏🙏🙏
@LowerDeckProps
Жыл бұрын
I got this working this morning. Thanks, Charles. Great tutorial! I'm looking forward to adding sound to my projects.
@thelastoutpostworkshop
Жыл бұрын
Fantastic!
@dudaqee2059
7 ай бұрын
hey so working on a project where I am only using one song on the SD card, but wanted to know how i could make it activate by the push of a button and only play the song once each time. think you could help me with this one?
@weler2491
16 күн бұрын
How to stop the song from playing?
@thelastoutpostworkshop
16 күн бұрын
mp3.player.stop();
@surfnexplore
Ай бұрын
excellent and to the point walkthrough to begin with, appreciate !!
@ashishkishore6447
5 ай бұрын
How can we use DFPlayer mini with Arduino Nano 33 IoT ?
@thelastoutpostworkshop
5 ай бұрын
Yes, the DFPlayer Mini can be used with the Arduino Nano 33 IoT. However, there are a few considerations you should take into account due to the differences in operating voltages and the additional features of the Arduino Nano 33 IoT. Voltage Compatibility: The Arduino Nano 33 IoT operates at 3.3V, whereas the DFPlayer Mini typically works with 5V signals. To safely connect the TX and RX pins of the DFPlayer Mini to the Arduino Nano 33 IoT, you might need to use a level shifter or a voltage divider to step down the 5V TX output of the DFPlayer to 3.3V acceptable by the Arduino's RX pin. Serial Communication: The Arduino Nano 33 IoT has one primary serial port used for programming and debugging over USB. To communicate with the DFPlayer Mini, you can use software serial on other digital pins.
@ashishkishore6447
5 ай бұрын
@@thelastoutpostworkshop Thanks for your prompt reply. Can you please make and share some tutorial on this? Shall appreciate your help on this!
@rando5930
6 ай бұрын
Thank´s a lot. now it finally worked on my setup!!
@monkeytree1648
4 ай бұрын
can you help me for some reason it only works if I use Uno not a Nano and in serial monitor for the Nano it says : Initializing MP3Player … MP3Player online. the Uno works perfectly fine pleases Help
@thelastoutpostworkshop
4 ай бұрын
Very strange, the wiring shoud be the same. Are you running the same code ? Does the Nano execute the playTrackNumber() ?
@monkeytree1648
4 ай бұрын
@@thelastoutpostworkshop the wiring is the same and it doesn’t play the song :(
@monkeytree1648
4 ай бұрын
@@thelastoutpostworkshop i used a different tutorial and I got it working thx for trying to help me
@DreamsOfTheMind-video
7 ай бұрын
Thank you very much! Your explaining is perfect!
@codecrusader123
8 ай бұрын
Super Project. This type of tutorial is very helpful for people thankyou
@AntonyIssaqS
6 ай бұрын
I have a problem with playing songs using DF player mini. It didn’t play the song. I had uploaded the song to the SD card. Then I insert that to the DF player. While inserting the SD card to the DF player, the light on the DF player mini turned off and there is no sign of playing the song. I thought that there might be an issue with the module. So I replaced that with newer one. Then also the same problem comes. I had used three modules till now but the problem persists. Can anyone who is familiar in this can able to solve this issue?
@thelastoutpostworkshop
6 ай бұрын
check if you have reversed TX and RX pins
@AntonyIssaqS
6 ай бұрын
@@thelastoutpostworkshop I am using without arduino
@AntonyIssaqS
6 ай бұрын
@@thelastoutpostworkshop can you please share your email?
@CharlieMashinini
Жыл бұрын
Greetings I am using the Gravity Digital Speaker Module for the MP3-TF-16P project, but my speaker has 3 pins. For my my connection I tried connecting the VCC and GND of speaker to the Arduino Mega, then the signal Pin to SPK1 of the MP3, I eventually connected signal pin to all other pins of the MP3 player but there is still no audio sound output, the speaker produces a scratchy sound The MP3 blue light is not turning on but on the serial monitor it says “MP3Player online” May you please assist me?
@thelastoutpostworkshop
Жыл бұрын
I am not sure if it can work since the gravity module has a digital interface when SPK connections on the MP3-TF-16P are analog, but it also have DAC_R and DAC_L pins, have you tried these ?
@BR-rg9ib
9 ай бұрын
CAN WE ADD SPEAKERS (WITH BUILTIN POWER SUPPLY) WITH 3.5 MM AUDIO JACK IN MP3-TF PLAYER?
@thelastoutpostworkshop
9 ай бұрын
There is no 3.5 mm jack on the module but maybe it would work with an amplifier module
@Pierre-Olivier-t8f
7 ай бұрын
I really appreciate your videos, really helpfull! i am working on controling the volume with a ultrasonic capteur for the distance and im not sure what fonction to use!! any advice? thanks for your work
@thelastoutpostworkshop
7 ай бұрын
Thanks, never tried it
@kevingreenberg4281
7 ай бұрын
When I run the code to test a song I am not seeing a blue light at all and no music is playing. Not sure what I did/am doing wrong.
@thelastoutpostworkshop
7 ай бұрын
The wiring may be the issue
@kevingreenberg4281
7 ай бұрын
@@thelastoutpostworkshop hmm I just tried again, same issue. I do hear faint white noise from the speakers but thats all that is happening
@sam-e6h5o
6 ай бұрын
the same thing keeps happening to me@@kevingreenberg4281
@_kazuha00
2 ай бұрын
can i put an earphone here?
@thelastoutpostworkshop
2 ай бұрын
I never tried it
@stephengrattage5219
9 ай бұрын
Can you use a Oled screen with this board? I have been trying to get this to work with a adafruit sound board but haven’t been successful
@thelastoutpostworkshop
9 ай бұрын
yes here is an example : kzitem.info/news/bejne/qbB-uH6acKSam3o
@robertrobert5583
8 ай бұрын
Excellent tutorial - thank you very much
@retrobombstudios1258
10 ай бұрын
Could a pico run this?
@thelastoutpostworkshop
10 ай бұрын
I did not try it, my only concern is the DFRobotMiniplayer library compatibility with the Pico, but since the MP3 player use standard serial communications, it should work. Give it a try!
@dreezykareem7199
Жыл бұрын
hey, mp3 player turns off when i plug in the sd card. its slowing down my project. pleas help me.
@thelastoutpostworkshop
Жыл бұрын
Is there any message on the serial Monitor ? Also recheck your wiring
@studywithrichardlin3381
9 ай бұрын
Tks for sharing. I can did it because I saw this video. Great. Good KZitemr.
@thelastoutpostworkshop
9 ай бұрын
Many thanks!
@jordangoddard630
Жыл бұрын
Can you point me in the right direction to learn how to Stop/Pause as well as Loop a track?
@thelastoutpostworkshop
Жыл бұрын
Pausing a track, I am not sure it can be done with this module, looping a track yes, if you look at the second video in the series you will get an idea on how to possibly loop a track : kzitem.info/news/bejne/k554tHd8sqGmfY4
@AnxBeta
Жыл бұрын
SD card format program does not work, loads then does nothing??
@thelastoutpostworkshop
Жыл бұрын
I reinstalled it and it worked just fine
@theveteranworkshop8328
11 ай бұрын
Hello again, Once again great video. I am having 2 issues, one when I do the file count I am getting a -1 as the number of files in my card. 2 and most important, I upload the program and it runs perfectly, then I remove the USB from the computer and hook it up to my mobile battery and nothing happens. Do I need a different code to start it once plugged to a battery?
@thelastoutpostworkshop
11 ай бұрын
-1 occurs when the player is busy and a timeout occurs for waiting too long for the player
@thelastoutpostworkshop
11 ай бұрын
Ho do you hook up the battery to the ESP32 ?
@tomas3244
10 ай бұрын
Great tutorial! Thank you! I followed every step of it. I have one issue, though. I have four tracks on my SD card, and some of them are super short (like 1 second). When i play the short tracks, they repeat themselves once. Why does this happen?
@thelastoutpostworkshop
10 ай бұрын
Very strange, I really don't know. If you play a track with this call : mp3.playTrackNumber(your_track_number, volume,true); Do it repeat itself ?
@tomas3244
10 ай бұрын
@@thelastoutpostworkshop Thank you for your quick response, I’ll check it out
@mostafamaged3404
Жыл бұрын
Does the player have to be connected to pins 10 and 11 ? If so why ?
@thelastoutpostworkshop
Жыл бұрын
You can use other digital pins since the Arduino library is using software serial Uart
@kingnylonofficial1139
Жыл бұрын
Please can you help me connect these to an ultrasonic sensores to detect object from 5meters
@thelastoutpostworkshop
Жыл бұрын
That’s a good idea for a future video
@Fusionultra2000
7 ай бұрын
When I run the sketch it only says mp3 player online and nothing happens. When I run the GetStarted example by dfrobot I get different results. I get a timeout error running it after the speaker makes a short crackling sound and then it says track 1 complete. I triple checked every connection with the same wiring in the video but I can't get it to work.
@thelastoutpostworkshop
7 ай бұрын
Seams like a wiring issue to me
@Fusionultra2000
7 ай бұрын
@@thelastoutpostworkshop I got it working now but it doesn't like long files that are more than a minute long. If I go to soundbuttonsworld and download a short audio file and add it to the sd card, it plays just fine. However if I put in a regular music length file into it, it will not play. Is there a size limit for each file?
@marjunemjhay6328
Жыл бұрын
I have a problem with playing loop folder function. After playing for let say 4 songs in a row my buttons stop working but the music still contineus to play. I only calling the button function from the main loop. I have 5 button that use millis and state change for single and long press. Does maybe something have conflict with the code?or does it have a blocking code that prevents it to continue in main loop?
@thelastoutpostworkshop
Жыл бұрын
if your playing your song with the last parameter as true : mp3.playTrackNumber(1,15,true), this code is blocking and the rest of the code is going to execute after the song as entirely played. Change the last parameter to false.
@marjunemjhay6328
Жыл бұрын
@@thelastoutpostworkshop Thank you for the reply. But i did not use playTrackNumber in my code. The problem is with mp3.player.randomAll and mp3.player.loopfolder() functions. When we say it's playing for at least 4 songs. The buttons just stop working. I dont know if there a blocking code that prevents it to go to main loop. Or conficts with my millis. Hope you can help. Thank you.
@JoelDahlén
6 ай бұрын
very nice! I approve!
@deepakzilla4962
Жыл бұрын
Sir I am doing a project on Blind Stick with multiple sensors (Fire, Water, LDR, Ultrasonic, DHT11) Can I use this method to play different sounds depending up on the sensor input reads and using the If, else if conditions ? BTW this was an helpful video
@thelastoutpostworkshop
Жыл бұрын
Yes absolutely, you can play sounds using if then else based on your sensors input
@deepakzilla4962
Жыл бұрын
Thanks a lot sir 🙏
@garyrowlands8537
9 ай бұрын
Hi Great clear video and content thank you. I have read through the comments below to see if anyone else has asked the following question. I have this unit and everything works...except....I cannot play a track with a number greater than 10 (ten) I can play up to ten, so double digits work great but not in excess of ten. I have fully formatted the card, the DF Robot player Mini is installed as is your very useful header file...... All the obvious and even some less obvious... Have you had this issue, if you did what was your way forward please. If I find one I will post it here. Thanks and I hope your Christmas was fantastic and the coming New Year also
@thelastoutpostworkshop
9 ай бұрын
I never had this issue before, do you get any message on the serial monitor ?
@garyrowlands8537
9 ай бұрын
Not in the Serial Monitor, simply the track will not play and the program hangs. If I change to a track that had a modified date and position of ten or under, it plays perfectly without hanging :)@@thelastoutpostworkshop
@thelastoutpostworkshop
9 ай бұрын
Paste your code here, I will check it out
@user001sg9
Жыл бұрын
Nice video, Thanks for sharing. I wish to add the MP3 player function to a selfbuilt Nixie clock and turn it into a "talking clock". For this purpose, I need to concatnate different MP3 files depending upon the time the clock is going to announce. My question: Does the MP3 Player library allow concatanation of files? Thanks for your comment/advice in advance.
@thelastoutpostworkshop
Жыл бұрын
Nice project! You don't need to concatenate the MP3 files (and the MP3 player don't have this functionnality), you can select which one to play by using code depending on the hour. Here is a very simple example : #define trackFor12 20 #define trackfor11 25 switch (hour) { case 12: mp3.playTrackNumber(trackFor12, 25, true); break; case 11: mp3.playTrackNumber(trackfor11, 25, true); break; break; // and son on }
@user001sg9
Жыл бұрын
@@thelastoutpostworkshop Thank you for your quick response. It is helpful.
@FiammaH2SO4
8 ай бұрын
Hi nice video it helped me understand how it works, but I have one question: Is there a way to stop the initialize if the audio files are in the void loop? like, I use a switch to toggle all off but I don't want to use it for removing the power, do you think is there a way with coding?
@thelastoutpostworkshop
8 ай бұрын
I ma not sure I understand what you mean exactly by "stop the initialize", show me some code please
@FiammaH2SO4
8 ай бұрын
@@thelastoutpostworkshop I mean like: void loop() { int filecount = mp3.player.readFileCounts(); Serial.println(filecount); mp3.initialize(); *Then Here in the loop I add some coding* And then after I did the code, I want a switch to, like, "mute" the speaker or to stop the code, because mp3.initialize(); makes the mp3 start to play, is there a "reverse" of the mp3.initialize(); or I have to stop all using external power connections?
@thelastoutpostworkshop
8 ай бұрын
the mp3.initialize() must be in the setup(), not in the loop.
@FIP60B30T
Жыл бұрын
@thelastoutpostworkshop Hi, I try to connect the mp3 player to a mega 2560 pro at hardware serial1 (pin 18 and 19). There seems to be no connection, can you help for a solution?
@thelastoutpostworkshop
Жыл бұрын
I don't have a mega board, so I cannot test it, but I assume pin 18 and 19 you are using are for the RX and TX pin of the MP3 player. Have you tried using pin 10 and 11 on the Mega for the RX and TX pins on the MP3 player to see if it works ?
@FIP60B30T
Жыл бұрын
@@thelastoutpostworkshop Thank you, yes I tried. There is even no message at the serial monitor with the mp3.serialPrintStatus(MP3_ALL_MESSAGE) command. It works with the ADKEY pin, so it's not defect.
@thelastoutpostworkshop
Жыл бұрын
you mean the MP3 is working with the ADKEY pin ?
@FIP60B30T
Жыл бұрын
@@thelastoutpostworkshop I would like it working with the UART but to test if it's not broken I tried the ADKEY pin.
@hayan112
7 ай бұрын
does it not work with 64 GB Sd card ????
@thelastoutpostworkshop
7 ай бұрын
No
@hayan112
7 ай бұрын
@thelastoutpostworkshop i thought it must work so i already bought the 64 gb😭. Thanks for the awesome tutorial tho
@thelastoutpostworkshop
7 ай бұрын
But I think you can format it as 32GB
@hayan112
7 ай бұрын
@thelastoutpostworkshop can you please tell me how and save me money and time, im in a rush for a project
@marjunemjhay6328
11 ай бұрын
Hi can you help me..i want to use your "mp3tf16p.h" with hardware serial..thank you very much.
@thelastoutpostworkshop
11 ай бұрын
Here is the code for using Harware Serial : #include "DFRobotDFPlayerMini.h", be aware that it is used for Serial for communication with your computer over the USB port : #define MP3_ERROR_ONLY 1 #define MP3_ALL_MESSAGE 2 class MP3Player { private: void statusOnSerial(uint8_t type, int value); void waitPlayIsTerminated(void); public: DFRobotDFPlayerMini player; MP3Player(); // No pins in the constructor now ~MP3Player(); void playTrackNumber(int trackNumber, int volume, boolean waitPlayTerminated = true); boolean playCompleted(void); void initialize(void); int serialPrintStatus(int errorOnly); }; MP3Player::MP3Player() // Constructor doesn't need parameters now { // Empty constructor } // ... [Other methods remain unchanged] void MP3Player::initialize(void) { Serial.begin(9600); // Start the hardware serial port Serial.println(F("Initializing MP3Player ...")); if (!player.begin(Serial, true, false)) // Pass the hardware Serial { // ... [Unchanged error handling code] } player.volume(10); Serial.println(F("MP3Player online.")); }
@marjunemjhay6328
11 ай бұрын
@@thelastoutpostworkshop thank you very much you are the best at this. Subscribed to your channel...keep it up..👍👍👍👍
@marjunemjhay6328
11 ай бұрын
@@thelastoutpostworkshop im having an error: request for member 'initialize' in 'mp3', which is of non-class type 'MP3Player()' mp3.initialize();
@marjunemjhay6328
11 ай бұрын
@@thelastoutpostworkshop do i have to change anything in my old script? I've just pass the mp3 with an empty value. MP3Player mp3(); Edited..: i get it... I have to lose the bracket..thank you very much
@VRNC-kn5tf
Жыл бұрын
This module works perfect for a project I'm working on its just that its a little quite even at max volume of 30. Is there a way to boost the volume without needing another module?
@thelastoutpostworkshop
Жыл бұрын
What are the specs of your speaker ?
@thelastoutpostworkshop
Жыл бұрын
Is it quiet with all the sounds you have on your SD card?
@exoticloop
11 ай бұрын
I'm working on a project rn that needs screaming. There are some amplifying circuitry you can do on a breadboard with transistors and other components but it can get cluttered and complicated. If you do end up using a module try a PAM8403 (im using this rn) or maybe a LM386 (i havent used this)
@elcaballerito-l8j
6 ай бұрын
Initializing MP3Player ... MP3Player online. -1 How I solve it, I have a 32GB micro SD card and good connections to the pins of the MP3-TF-16P to the Arduino, and only one song.
@thelastoutpostworkshop
6 ай бұрын
I f you have 1 song, make sure you pass the track number 1 in this function : mp3.playTrackNumber(1, 25,false); If this is the case, recheck you wiring, it easy to mix-up RX and TX pin
@elcaballerito-l8j
6 ай бұрын
@@thelastoutpostworkshop ok thx
@Ninanas98
Жыл бұрын
Thanks for the video! Is it also possible to use a button to cycle through the sounds while they still play in a loop? So that when the sound is done playing it jumps to the next sound, but when it is playing and you want to skip this sound you can press the button to go to the next? I tried a few things but can't get it to work.
@thelastoutpostworkshop
Жыл бұрын
yes you can do that, just specify false for the last parameter when starting a sound : mp3.playTrackNumber(sound, currentVolume, false); So the sound will start playing and your code will not be blocked, you can then do anything you want while the sound is still playing, including starting a new sound!
@Ninanas98
Жыл бұрын
@@thelastoutpostworkshop Thank you for the reply! I tried it like this if (digitalRead(buttonNext) == ACTIVATED){ i ++; } mp3.playTrackNumber(i, 4, false); but the sound keeps starting from the beginning until you start the last sound in the folder, that one is played fully. Would it also be possible to combine it with a for loop or something so when you don't press the button the next sound will automatically play after the current sound is finished?
@thelastoutpostworkshop
Жыл бұрын
if you want to play a sound automatically after one is finished, you can do it this way : mp3.playTrackNumber(sound1,15,false); while(!mp3.playCompleted() && !buttonPressed) { } //play the other file
@Mysthral1
Жыл бұрын
Intéressant comme d'habitude. À ton avis, est-il nécessaire de prendre ce modèle exactement, (MP3-TF-16P comme ta photo, écrit sur le dessus) ou il n'y a pas de différence (côté qualité bien sûre? Il y a plusieurs modèles sur Amazon et à différents prix. Celui qui porte le numéro du modèle exact, au lieu de DFPlayer mini comme les moins dispendieux, est 12 $ au lieu de 3 pour 5 $.
@thelastoutpostworkshop
Жыл бұрын
Je n'ai testé que ce modèle jusqu'èa maintenant
@Mysthral1
Жыл бұрын
OK, je tentes ma chance.@@thelastoutpostworkshop
@omerhalitipekci2256
7 ай бұрын
i have a issue. code and everything works well but when code starts in 3 seconds it volumes down to nothing. can you help me?
@thelastoutpostworkshop
7 ай бұрын
You hear sound, but it lowers after 3 seconds ?
@omerhalitipekci2256
7 ай бұрын
yes@@thelastoutpostworkshop
@omerhalitipekci2256
7 ай бұрын
@@thelastoutpostworkshop yeah, sorry for my bad english
@thelastoutpostworkshop
7 ай бұрын
very strange, please post the code here
@guohongxu4825
Жыл бұрын
Hi, if I want to stop the mp3 file halfway while it's playing, how would I do that?
@thelastoutpostworkshop
Жыл бұрын
The easiest way is to cut your mp3 file with the free MP3 editor Audacity : www.audacityteam.org/
@thelastoutpostworkshop
Жыл бұрын
You can also stop the song in code using the stop() function this way (here the MP3 stops after 3s): mp3.initialize(); mp3.playTrackNumber(23, 25,false); delay(3000); mp3.player.stop();
@guohongxu4825
Жыл бұрын
@@thelastoutpostworkshop many thanks for the quick response. do you have a reference sheet that i can look into?
@michaelcoles4181
Жыл бұрын
Thanks for this video, I'm new to this and found it very informative. I've got the player to work as instructed but I'd like to play two tracks basically an engine on/off effect. Track 1 (engine startup) would play continually as long as a momentary switch is pressed then track 2 (engine cool down)would play automatically when the the switch is released. Could this be done and where would I wire the switch?
@thelastoutpostworkshop
Жыл бұрын
Yes it can be done, you can wire the switch on pin 7, and use this to initialize it in the setup() function: void setup() { pinMode(7, INPUT_PULLUP); // Rest pf your code here } then in the loop function you read the push button: void loop() { if (readPushButton()) { // Play your first MP3 file while(!readPushButton()) { // Here we are just waiting for the push button to release } // Plya your second MP3 file } Here is the function to read the push button: boolean readPushButton(void) { int value = digitalRead(PushButtonPin); delay(5); return value == 0; }
@michaelcoles4181
Жыл бұрын
Thanks for answering so promptly. I'll definitely give this a go!@@thelastoutpostworkshop
@michaelcoles4181
Жыл бұрын
Having problems setting this up. I keep getting error messages no matter which order I put them in. #include "mp3tf16p.h" MP3Player mp3(10,11); void setup() { Serial.begin(9600); mp3.initialize(); pinMode(7,INPUT_PULLUP); } void loop() { boolean readPushButton(void); int value = digitalRead(PushButtonPin); delay(5); return value == 0; if (readPushButton()); mp3.playTrackNumber(1,30); while(!readPushButton()) mp3.playTrackNumber(2,30); } I'm obviously doing something very wrong.
@thelastoutpostworkshop
Жыл бұрын
here is the full code for the sketch corrected: #include "./lib/mp3tf16p.h" #define led 13 // MP3 Player MP3Player mp3(10, 11); #define PushButtonPin 7 void setup() { Serial.begin(9600); mp3.initialize(); pinMode(PushButtonPin, INPUT_PULLUP); } void loop() { if (readPushButton()) { mp3.playTrackNumber(1, 30); while (!readPushButton()) ; mp3.playTrackNumber(2, 30); } } boolean readPushButton(void) { int value = digitalRead(PushButtonPin); delay(5); return value == 0; }
@michaelcoles4181
Жыл бұрын
Thanks for taking the time to correct this for me. I've just started and realise that I have a lot to learn.@@thelastoutpostworkshop
@he214abc
10 ай бұрын
how many sounds tracks can be played at the same time ?
@thelastoutpostworkshop
10 ай бұрын
only one
@he214abc
10 ай бұрын
@@thelastoutpostworkshop i played rc tank, many sound tracks needed to be played at the same time, like 5 channels, then what i should use instead ?
@rosmanminiatures
10 ай бұрын
I have tried this and, for sure not 5 chanels but a couple, and you have to conect as many dfplayer as channels you want, with only one speaker needed. For example in your case, i supose the noise of the engine sound will be one channel and at the same time when the canon shots you want to hear an explosion, then you play this on the second one. The dfplayer has to be connected to another pin set for RX TX comunication. And i reccomend to think about if you really need those five channels or if you can simplify them in less because all that will be so pin consuming
@suhasmahajan-if9ez
Жыл бұрын
sir can you plz help me it snot working
@tisenres
11 ай бұрын
Thanks for such an informative video on KZitem!!!!
Пікірлер: 197