Verry nicely done video sir ! Thanks from France 😊
@marceliopti1735
28 күн бұрын
Realy helpfully video, thanks ❤
@MrRemo1965
Жыл бұрын
You speaking like Valentino Rossi 46 ❤️❤️❤️. Great video 💪🏻👍🏻 Thanks
@indianscout1019
3 жыл бұрын
Great Vid friend. Your English version is much appreciated!!
@MaraDaCoriovallum
5 ай бұрын
Thank you for sharing.....🤗 I have to remove the tank soon to change the fuel tap and lay some cables....
@zullzull9163
7 ай бұрын
What size for the spark plugs? 11mm or 14mm?
@chrisnielsen6390
Жыл бұрын
Thank you, from a Dane i Norway😊👍
@camiloverland
2 ай бұрын
did you empty the tank before taking the rubber hose off?
@mastorakos
2 ай бұрын
No, I just close the petcock.
@camiloverland
2 ай бұрын
@@mastorakos I will check, because my RD07A has some parts not genuine, for example it doesn't have the big on/off knob, just a small one under the tank.
@marcorepsol5809
3 жыл бұрын
Molto utile. Grazie 😉
@yusufbudeeb
Жыл бұрын
Hello why do you have to remove the fuel switch. Can you not just turn it to the off position. I have a 1992 rd04 it has 2 switches one on each side
@NatsDADCrook
Жыл бұрын
Because it will snap off when u try removing the tank
@elgusster
3 жыл бұрын
Hi, nice. I am having problems with the third spark plug. It won't come loose. Could you tell me what is the size of the wrench? 18 mm 0.7 ". Thanks
@elgusster
3 жыл бұрын
@@mastorakosWhat about pressure? How much do you tighten the spark plug? I have seen thaupst you do it by eye, isn't it necessary to use a pressure spanner? With a pressure torque of 14 Mn? Isn't too much or too little pressure dangerous? In the manual it says that once you can't tighten it any more by hand, tighten it with the spanner 1/2 turn, is that correct? Thank you🛠
@44degreesmotorcycleadventures
Жыл бұрын
Hey I just came across your channel. Just got myself a AT 750 RD 07 1997. First of all thanks for your videos! I am in the process of doing a bit of maintenance on the bike and I came across something that I am not sure if is common on these bikes or not. While cleaning my chain and sprockets I noticed that the back sprocket has a free play. If I put the bike on centre stand and rock it side to side it moves a bit. Is that normal? Or am I have an issue with the bearings. I was thinking that I don't have a bearing issue as I can rock the wheel side to side and it solid. Would you be able to tell me? Thanks again and keep it up with it!
@mastorakos
Жыл бұрын
If you have free play on your sprocket from side to side (right, left) then you have to replace the sprocket bearing (only one). That's something different from the wheel bearing (there are two of them.).
@44degreesmotorcycleadventures
Жыл бұрын
@@mastorakos Thanks that is exactly my problem. Will order a new one. Thanks for your help!
@cervantes4272
3 жыл бұрын
Πώς ρυθμίζονται οι στροφές στο ρελαντί χωρίς όργανα; Καμία συμβουλη;
Пікірлер: 21