Definately try to make more videos with Ernie! Both of you seem to have fun making videos and it'll help promote you both.
@bobbyshaftoe
3 ай бұрын
So.. can you roll up what you did? 5? : cold air 20? : tune 5? : LS coils 5? : cat 5? : cat-back This makes me wanna go fire up our Driveway Art Statue
@IStratz
3 ай бұрын
I think he made like high 80's with the bad coils that were on the car. And went up to 110ish with upgraded LS coils. It's not a fair comparison though since the coils were probably worn out. So we don't really know 1-1 if the LS coils made more or not. Overall it was like a 1-2hp for the intake (but also less torque down low), cat was like 2-3hp I think, cat-back was basically exactly the same with no gain from the last dyno session, and the tune was like 10-20hp.
@Johnwalter1044
3 ай бұрын
That 600.000miles RX8 is insane! Also, 600.000 miles is 965.606 kilometers. If it passes 621370 miles, that's over one million kilometers!!!
@lonniemullins9921
3 ай бұрын
I'll see what I can do to make that happen.
@88Frank
3 ай бұрын
Can you imagine the fuel bill
@lonniemullins9921
3 ай бұрын
@@88Frank It's not bad when it's your work car and you get paid mileage
@88Frank
3 ай бұрын
@@lonniemullins9921 😎 nice
@Sbailey294
3 ай бұрын
Would be cool to do a video interviewing that guy
@craigcoghlan546
3 ай бұрын
Thats allgood for the rx8 with 600,000mls I got 1.3 million km on a S1 RX7 with a12A . 2 × 12A engines and 1× 12A turbo, and that's when the fun really started .god I miss that car
@spuds3986
3 ай бұрын
Man your content always makes me think about how much I need a rotary
@hirevhoon7474
3 ай бұрын
Get one brother
@swampyfox8688
3 ай бұрын
Do it. The sale prices keep going up, but still under $10,000 for a good one
@phalanxperformance1915
3 ай бұрын
Rx8 made 50+hp..I look 50+ lbs on camera! brother you forgot to mention that 🤣
@StormchaserNickGorman
3 ай бұрын
Great video guys! Hope to get mine back up and going soon with another engine.
@Macinvodakin
3 ай бұрын
Love the energy in the video and thank you for sharing all the results 👍
@josiahrichardson5752
3 ай бұрын
Man I love your videos, Been missing my RX8 a lot recently and your videos give me some joy!
@Seiro_01
3 ай бұрын
*I don't have oil in my intake...* I might have a smidge in my alternator, however.
@TheHobbyExpert
3 ай бұрын
I’m so glad there’s people who like RX-8’s even more than me. I’ve been dying to buy one for years and just can’t find the right one for the right price
@paulvernon4160
3 ай бұрын
I would suggest, if it's not already in there a mesh screen in front of the MAF to reduce turbulence as this could rob your ECU of a stable air mass reading and air temp reading, also if you have oil in your intake the chances are the MAF is contaminated which again will affect your mass air readings and air temps. It's rare for me to have an oil burp as I always keep the oil level at the 2/3 to 3/4 mark(easier with a clean oil adapter(sohn) as my oil level never moves)
@RADPotential
3 ай бұрын
I've got the screen in there. MAF is clean
@Icarus-rk9nl
3 ай бұрын
Would be awesome to see you get ahold of brettus's manifold and doing his turbo build. An rx8 making 400 whp is a game changer
@inaNis_
3 ай бұрын
I skimmed through the video... did he mention that manifold in this video? I remember reading that thread on the log style manifold quite some time ago on the forums
@Icarus-rk9nl
3 ай бұрын
He didn't mention it. But with his experience it'd be well within his ability. The garret turbo isn't cheap, but would be awesome to see. Maybe someone has a spare lying around lol
@gallantthehero
3 ай бұрын
Now i know where to go when i finally finish my RX8 build since i live near STL, and once done would be cool do a meetup
@BushidoDriver
3 ай бұрын
Awesome documentation! Really love what you're doing with the channel! Can't wait to see what the hybrid does.
@Clinton-nt6qp
3 ай бұрын
Great video, I have my car basically the same way you have it. Bennett coils are amazing, I have his ast for the coolant also. Only thing is I have stock header and 2 1/2 midpipe leading into hks high power single exhaust. Im using the versatune 91 octane for the coils. Car is definitely faster then when I started, I did put a new Rman engine in it 3 years ago. Love my 8 but it has nothing on the FD, if you take the FD for a drive then get in the 8 …. What are we doing lol
@lpvgs-817
3 ай бұрын
Nice. Love how much love you have for rotaries and rx7s/rx8s
@swampyfox8688
3 ай бұрын
600k is my goal for my 8! By my math… that’s only 6 motors. 🤣🤣 2 down…. 4 to go! Let’s go!!
@Tsunamirx7
2 ай бұрын
I’m in STL and saving everything I’ve got to get my engine built by Ernie!
@dojoworks7704
3 ай бұрын
I still can't believe how much the AEM intake costs for what is essentially a couple bits of pipe and connectors.
@swampyfox8688
3 ай бұрын
Plus the obnoxious whistle you get from any aftermarket intake
@noname-sd5dt
3 ай бұрын
It is plug and play though, and you have screens in the intake so the maf reads correct. Overpriced yes... but still a reasonably good product.
@kululv
Ай бұрын
as a newbie I do not understand how a newly rebuilt engine can have low compression. And also, I wonder how all these mods and power gains translate to gains on good engine?
@wthomason
3 ай бұрын
Guess I’m going to have to high flow my cat…. Can you share which versatune map you ended going with?
@jo-qp7mz
3 ай бұрын
Never hurts to clean and reset the crank angle sensor. The old brake pedal pump
@tradewindzjamaica6799
3 ай бұрын
This could change the whole game! Great advice
@jacob6325
3 ай бұрын
Is there anyway you could share the versatuner tune?
@Valorplumbingvt
22 күн бұрын
This guy knows what he is doing
@ricepony33
3 ай бұрын
Spray it!!
@ADudesRotary
3 ай бұрын
Was hoping you kept the low compression motor in this car, and threw on the cheapest turbocharging to see what happens to the hp and whether it would survive.😊
@btownballer27
3 ай бұрын
Sad I sold mine. Great driver but it was rotten underneath. Got a minty mk3 mr2 though. Went from rad to cool. Still loyal to the channel though.
@fcLouie
3 ай бұрын
Hi was hoping I could get some expert advice! So I have an 88 10th anniversary I recently got running after 7 years of sitting. I replaced pretty much the whole fuel system including fuel lines. I didn’t replace the fuel injectors. Anyway the car starts up perfectly every time and fast too. It idles strong and doesn’t want to die. Throttle response is good but when reviving passed 4k rpm in neutral it sounds like anti lag or 2step it backfires. And when driving it does the same thing. I’m assuming secondary injectors or tps or even timing being off. I do have a full banzai racing emissions delete kit. Omp delete and I premix. Any advice or suggestions would be great thanks I hope you see this!! Love ur content I’ve learned a lot so far😎 also have confirmed I do have spark*
@jo-qp7mz
3 ай бұрын
I liked the knn in box for the rx8 not very loud tho but seemed to work better
@rotaryperfection
3 ай бұрын
Why does it sound like that dyno isn't putting a consistent load on the engine?
@scotty305
3 ай бұрын
It's a Dynapack dyno, as far as I can tell that brand adjusts the loading to achieve a constant acceleration rate from the engine, which will sound different than an engine running on an inertia dyno or running on a racetrack. On my RX7 with stock twin turbos, boost control settings that gave a smooth boost curve on the road would result in weird boost oscillations on a Dynapack dyno, as though the dyno loading was overcompensating for the turbos spooling.
@Greasy
3 ай бұрын
I kinda wanna get my crappy 4 port 6 speed on a dyno and see if it can beat 80hp 😂😂
@brij934
3 ай бұрын
Lol I made my CAI out of pvc pipe 😂
@BeaverLakeMotorsports
3 ай бұрын
These are 5th gear pulls? If so the dyno ramp rate should be consistent with a street pull in the same gear, this doesn't seem to be the case, sub 4 sec pull in 5th.
@phalanxperformance1915
3 ай бұрын
It's 5th, trust me..With the tests we did we wanted to be consistent and somewhat quick..The ramp rate time doesn't effect the overall hp/tq to much, even if I were to use 3rd or 4th gear instead the hp/tq is usually within a few of 5th..I can set the ramp rate to last way longer than 4 seconds but it will just heat the engine up so much we would have to wait for it to cool longer between periods to be consistent, especially with the ambient temps that day..If we were to do a proper engine/ecu mapping session it would take most of the day, if not 2 days because I would do exactly as you described and simulate street pulls and evrything else in between to adjust all the cells on a fuel/timing map.
@BeaverLakeMotorsports
3 ай бұрын
@@phalanxperformance1915 Nothing inherently wrong with that but why not test in second gear with an appropriate ramp rate? It would give you the quick results for comparison purposes and not get too hot.
@liamflynn6929
3 ай бұрын
Man i really need to fix my rx8. Clutch blew up right after i bought it haha
@3kzack
3 ай бұрын
Out of all 5 I’ve had, I’ve had some sort of clutch issue wether it be cmc, csc, or clutch itself. And I’ve had 2 of them the clutch pedal snapped.
@liamflynn6929
3 ай бұрын
@@3kzack yeah PO had just replaced the clutch and hydraulics, think he just put in a shitty eBay clutch or something
@supermoop
3 ай бұрын
You're giving my car too much hope lol.
@andrewruiz9865
3 ай бұрын
chop chop rotary boy drop a proper good compression motor in it and lets see it hit 200!!
@wthomason
3 ай бұрын
When you high flowed your cat did it throw a CEL? If so were you able to fix that with versatuner?
@RADPotential
3 ай бұрын
Already had the CEL. But yes I believe you can fix it with VT. Ernie will know. I'll ask him about it when I get to the dyno again
@frantisekzacha3349
3 ай бұрын
Hi to all of you guys. I found a barn find rx7 fb with 140 000 miles on it. I can by it but I dont have much money to rebuild the engine. Do you guys think Its even a good idea to buy it? ( I will slowly make the money and repair everything )
@jubrie1758
Ай бұрын
Is this a 4 or 6 port cuz.......those hp numbers are a bit wild
@ramensospicy2992
3 ай бұрын
crazy how rx8s were advertised as having over 230hp when new but only dyno at 150hp
@dojoworks7704
3 ай бұрын
Probably measured of the crank rather than at the wheels.
@scotty305
3 ай бұрын
@@dojoworks7704 150 wheel HP from 230 crank HP would be 35% drivetrain loss, does that sound realistic to you?
@kester135
3 ай бұрын
This is a 4-port 5-speed right? it'd be interesting to see the 6-port base and what power it gains
@RotaryJunkie
3 ай бұрын
At 70psi I would be absolutely shocked if it /ever/ pulls timing.
@Psyrecx
3 ай бұрын
*By 'average rx-8', what does that mean, exactly?* Do the S1s and S2s have different averages, or are they both the same?
@RADPotential
3 ай бұрын
Just an average condition RX8
@Rx4Lyfe
3 ай бұрын
You realise you have a 'soot sprite' hanging off your cap?😊
@Lazy_michael_biatch
3 ай бұрын
LS coils lmao that's sacrilege
@IStratz
3 ай бұрын
Does Versatuner cause any issues with OBD-II emission testing? Or will you basically never pass again after flashing?
@noname-sd5dt
3 ай бұрын
Versatuner is reversable. Put in your desired tune and drive. When getting tested, revert to stock, finish and reflash.
@IStratz
3 ай бұрын
@@noname-sd5dt gotcha makes sense
@goldenrotorracing
3 ай бұрын
Sounds like he's using 3rd gear instead of 5th which is 1:1
@mazmorbid5840
Ай бұрын
I stopped watching after you said Billet Built cloned ignition coils.
@scizzorz5794
3 ай бұрын
rx8's don't make 125hp to the wheels. You must be doing something wrong especially with gslse housings. You should be able to get over 200 whp easily
@alphameric
3 ай бұрын
This is the junk compression motor, not an actual good motor
@LevaughnMartin
3 ай бұрын
I made 155 whp on dyno mazda rx8 4 port stock Only a decat and a special trick and I got 155whp to the wheel on dyno 62 ,000miles car just To be honest all the rx8 needs it a flipping haltech or any tunable ecu And your be surprised to much horsepower gain your going to get with a fully tunable ecu Rx8 are tune really really lean at low end and really rich above 6000 rpm To they have alot more horse power and low end power if you get a fully tunable ecu
@LevaughnMartin
3 ай бұрын
@@alphameric your only saying that because you don't understand the rotary concept Best engine ever made to me And those 2 strokes just make sure it's well lubricated and we all good forever more
@alphameric
3 ай бұрын
@@LevaughnMartin Let me rephrase. This is the dead, low compression motor he's been doing various tests on (over a series of videos) to see how far he can stretch it before replacing it. Obviously a healthy Rx8 motor would make more appropriate power, whereas this has 70psi of compression (bad).
@nobodyspecial5026
3 ай бұрын
not true, a properly built and blueprinted but non-ported 6-port Renesis should be ~225-235 whp at the wheels, with 265-275 bhp at the flywheel being fairly standard on Daryl Drummond’s Superflow dyno in the later years. When he started in 2003 with the Renesis, it was only 240-245 bhp. It’s a little higher at the wheels on the Pro Formula /STAR Mazda race series cars because their race purpose transaxle drivetrain had less losses; 240-245 whp.
Пікірлер: 88