Man, You have the best tutorial in Bifrost for beginner. It helped me a lot to get started on my first liquid sim project. Thanks a lot Sir. Angelo from Philippines
@SnapLaunch
5 жыл бұрын
Thanks Gel. Glad it was useful. Happy simming!
@simplifiedmaya6591
7 жыл бұрын
yummy , yummy , yummy . you reminded me of a piece of chocolate I put in my fridge , i'm going to eat it now
@Skuddbutt
6 жыл бұрын
did u eat it
@danydc666
6 жыл бұрын
how it was?
@AakashKalaria
6 жыл бұрын
Suspense is killing me.
@FreaknJoshwa
5 жыл бұрын
legend says that he has yet to eat the chocolate.
@juancarlosgzrz
Жыл бұрын
Thanks a lot!
@SnapLaunch
Жыл бұрын
Most welcome!
@Conceptcreator
3 жыл бұрын
awesome tutorial. I do have a question though, when I do playback with my 2700x pc with 64GB or ram, it is sooooo slow. I can basically not have a preview like you have, got any clue why?
@SnapLaunch
3 жыл бұрын
Thanks for your feedback. Unfortunately I don't know why it would be running slower than this one - this video was original done on a quad core with 16GB of RAM, so I imagine your system should provide better performance. Perhaps do you have a small voxel size? Or is your scene really big?
@nashforrest9175
3 жыл бұрын
Sorry to be so offtopic but does someone know of a way to get back into an Instagram account?? I was stupid lost the login password. I would love any tips you can offer me
@zavierjakob3836
3 жыл бұрын
@Nash Forrest Instablaster ;)
@nashforrest9175
3 жыл бұрын
@Zavier Jakob Thanks so much for your reply. I got to the site through google and I'm trying it out now. I see it takes quite some time so I will reply here later with my results.
@nashforrest9175
3 жыл бұрын
@Zavier Jakob it did the trick and I now got access to my account again. I'm so happy:D Thanks so much you really help me out !
@softdarkpiano953
4 жыл бұрын
amazing Simulation!!!!
@SnapLaunch
4 жыл бұрын
Glad you enjoyed it!
@IncubusOfDeath
6 жыл бұрын
Thank you this awesome, and very easy to follow tutorial...
@SnapLaunch
6 жыл бұрын
Thanks Mako! I appreciate your feedback.
@IncubusOfDeath
6 жыл бұрын
SnapLaunch You're welcome!
@noirwolfcreations8827
7 жыл бұрын
it's been 20 seconds watching and i already subbed cause i know it's gonna be awesome
@Jasmin-jw2oc
4 жыл бұрын
it was so helpful thank you very much! keep up the good work!
@SnapLaunch
4 жыл бұрын
Glad to hear it was helpful! Thanks!
@ramezmahdi1818
6 жыл бұрын
you're awesome bro
@valkonxedits2332
4 жыл бұрын
I was having an issue with tue continuous emission thanks a lotttft
@Chelsea-bh7wz
7 жыл бұрын
How do I cache a simulation animation?
@SnapLaunch
4 жыл бұрын
Thanks for your question Chealsea Agno! I hope you've cached many sims since you asked the question!? :p I'll do this as an upcoming video.
@Chelsea-bh7wz
4 жыл бұрын
@@SnapLaunch yep hahaha thanks though ;)
@sandyly
7 жыл бұрын
great
@SnapLaunch
7 жыл бұрын
Thanks for your feedback.
@jacobmaturen7216
6 жыл бұрын
HUGE
@noirwolfcreations8827
7 жыл бұрын
short sweet awesome one do more of these simulation tutorials please
@stever73
4 жыл бұрын
Love the tutorial, thank you! I had a question, how do I limit the fluid so it ends at a certain point?
@SnapLaunch
4 жыл бұрын
Great question! I was stumped when I first tried to turn it off too. The link below has some good answers. :) Happy simming! knowledge.autodesk.com/support/maya/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/Maya/files/GUID-140EBD34-8984-444F-9478-82B77BAE5685-htm.html
@lma6557
7 жыл бұрын
Very clear and simple! How many particles did you have at the end?
@SnapLaunch
7 жыл бұрын
Thanks for your feedback LMA. I didn't record how many particles were in the final simulation, but if you are still keen to know, check out the file in the description and let it simulate to find out.
@PavanKumar-hb1gt
6 жыл бұрын
Waiting for Ur new tutorial about hair simulation
@theconstantine1159
4 жыл бұрын
how i can shoot water from hose?
@FuelMYGamE
7 жыл бұрын
thx ;)
@SnapLaunch
7 жыл бұрын
Any time
@rusandutv5845
3 жыл бұрын
I can't do it my computer crashes :(
@simplifiedmaya6591
7 жыл бұрын
Thank you for this helpful tutorial, but my collider acts like water resist cloth , what if I want to make it wet ?
@darksoulgamingIND
5 жыл бұрын
put some wet water on it...simple xdxdxdxdxd
@srTodko
6 жыл бұрын
can i do this with maya 2016?
@ninaelric4628
6 жыл бұрын
My bifrost liquid stopped working when I translated my emitter...
@turls5456
7 жыл бұрын
doing a similar thing with a viscosity setting of 30, rendering mesh in vray, but the results are terrible as the icing falls down the object in a jittery, jiggly fashion. dear oh dear.
@maacdesmond
6 жыл бұрын
check out the viscosity of any liquid type "in google" pick those numbers as reality because VRAY is Very real render engine.
@jameswilkinson150
7 жыл бұрын
I have a question guys, my sims run SOOO slowly. Is there any way to speed up replaying? I believe it's something to do with cashe I have asked on Autodesk's site and it didn't work. We are running 2016. Would be grateful for any advice..
@Chelsea-bh7wz
7 жыл бұрын
As far as I know the playback speed of the simulations depends on the processing power of your computer as it is calculating each frame real time
@baileeemelander5349
6 жыл бұрын
when I open up the file from gum road, the anmation timeline is red and won't cache. ANy Idea why?
@SnapLaunch
6 жыл бұрын
Sounds like the timeline is selected. Try clicking in it to deactivate it. Not sure why it won't cache, but just to be sure, is the bifrost system selected when you try to cache it?
@alexbarrail7956
4 жыл бұрын
@@SnapLaunch i have the same issue. the timeline gives "bifrost evaluation error" Everything works except there is no fluid coming out of the box
@txyzlux1137
7 жыл бұрын
Thk
@SnapLaunch
7 жыл бұрын
Welcome
@SonnyAngell
6 жыл бұрын
In the latest version.. there is no longer a viscosity setting. only "scale" which does nothing but screw things up. I cannot for the life of me get my fluid to be viscous by ANY fraction. I understand its now based on a ratio of scene size and density... but I tried everything.. NOTHING works. can you help
@SnapLaunch
6 жыл бұрын
Viscosity is still an option for me in Maya 2018. To access it, select the 'bifrostLiquidProperties1' node in your Outliner, then, in the Attribute Editor scroll down till you see the Viscosity tab. Adjust as desired.
@Sploige
6 жыл бұрын
In maya 2016 the viscosity option seems to have been entirely removed from the interface. The only option is scale and anything larger than a 2.0 causes computing frames to hang indefinitely. Even with SP6 and Maya Extensions 2 there's no change. Also, in my version of bifrost the outliner only has one bifrost object all the objects likes props don't exist at all even trying to select them directly by name using MEL doesn't work. I guess the next thing to try is Maya 2018 for it.
@SnapLaunch
6 жыл бұрын
Scaling like that could be an inventive hack, but will likely throw up additional issues to contend with (as it sounds like you've already experienced). I know Bifrost had a major restructuring in 2017, so 2018 is probably going to be your easiest route to solve the issue.
@Sploige
6 жыл бұрын
Yeah, it's all stable in Maya 2018. I'll try and see if I can bake down my simulation as geometry or something and reimport it back into maya 2016 for the project that I actually wanted to use it on. Thanks SnapLaunch.
@SonnyAngell
6 жыл бұрын
Youre right... thats what I did and it worked perfect =P thank you!
@int16_t
6 жыл бұрын
I use phoenix fd for this because its simple.
@invalidsoup8427
6 жыл бұрын
Did you make any sales on this?
@SnapLaunch
6 жыл бұрын
It's free! And yes, some generous people donated.
@invalidsoup8427
6 жыл бұрын
I don't have AI Standard in 2018 Maya.
@SnapLaunch
6 жыл бұрын
You'll want to use aiStandardSurface in Maya 2018 for similar results. Unfortunately aiStandard isn't forward compatible as Arnold was upgraded and the shading model changed, so new material settings will need to be dialed in.
@jameswilkinson150
7 жыл бұрын
I keep seeing a cube of particles just drop out of my emitter for a second or so and then they just disappear? Does anyone know what I'm doing wrong?
@SnapLaunch
7 жыл бұрын
Do you have 'Continuous emission' turned on? When you say they disappear, do they stay in place and disappear or fall down and disappear from view?
@jameswilkinson150
7 жыл бұрын
SnapLaunch hi, yes I have switched that option on. They disappear once then don't seem to come back. It's a bit odd. 😕
@jameswilkinson150
7 жыл бұрын
BTW, it just took a while for my machine to run through it. AOK.
Пікірлер: 72