If you are stuck trying to find the Create Active Rejet Body and Create Passive Rejet Body also Gravity commands follow these instructions. click the drop-down menu that says modeling and go to customize then go to FX after that find Fields/Solvers and then add Fields/Solvers to FX then go to Fields/Solvers at the top of the default screen layout and then you should find Create Active Rejet Body and Gravity. I hope this helped.
@SantaAgain77
5 жыл бұрын
Oh, Leo...! Thank You So Much !!!!!
@abichandran2719
4 жыл бұрын
Thank you
@vindicty2967
3 жыл бұрын
thx u babe :3
@lexxrelaxx2016
3 жыл бұрын
There is no Dynamics on my Maya. Where is Drop-down menu?
@thelexus4189
3 жыл бұрын
thank u
@sarac.3568
2 жыл бұрын
Whaaaaaat? This is amazing! I am a complete beginner and I thought you have to "draw" the whole thing yourself. As the video was nearing the end I was thinking "Hmmm, how will he do the whole animation in one minute?". Turns out, this software's really smart.
@AjitheshGuruprasad
9 жыл бұрын
This was really simple and to the point video ...thank you very much :)
@multimediadiploma463
3 жыл бұрын
kzitem.info/news/bejne/lLCQmIlsp5mAoYY MAYA cc modelling subscribe 👍 link Bill and comments 👆 support channel Started now tutorial Making 2021 ... Tamil and Telugu
@irenasikleska4885
9 жыл бұрын
Thank you so much Mike Hermes. I just started using Maya tonight and this tutorial was my first to try and i can't believe i completed it. For a minute there I was going to tell you my bricks fall through the floor when i start my animation but then i realised i might need to raise them and it worked! Your video is so clear to follow and precise, again thank you so much! God bless xx
@MHTutorials3D
9 жыл бұрын
Irena Sikleska Thank you so much Irena and I am honored to take part in your first steps in Maya ! Mike
@sashaw7275
Жыл бұрын
I've watched many others.. but you explain it so easily . Thx:)
@MHTutorials3D
Жыл бұрын
I always try to leave out anything that is not absolutely necessary
@mounirtech6798
5 жыл бұрын
thank you indeed for this, this is my first time to see how it's working, thanks again,
@multimediadiploma463
3 жыл бұрын
kzitem.info/news/bejne/lLCQmIlsp5mAoYY Subscribe 👍 MultiMedia modelling February start now tutorial Making please support 2021...
@juanmazotti1262
2 жыл бұрын
I feel like it's no exaggeration to say you are a godsend. I've been making my own soft since i was 14ish and since then it's beco my
@Astrovic1
4 жыл бұрын
really cool Video! Thanks for uploading, was exactly what i was searching for^^
@olezhka0621
4 жыл бұрын
Thanks man!! I just started using Maya!
@dianem.6118
9 жыл бұрын
Thank you so much I've never used maya before and our animation teacher is asking for a small animation and now i can do it. = )
@MHTutorials3D
9 жыл бұрын
Glad I could help Diana ! Mike
@PaulichePaul
9 жыл бұрын
Good job! It's a very good tutorial, especially for beginners like me. Thanks !
@MHTutorials3D
9 жыл бұрын
Pauliche Paul Thank you
@mistatig
7 жыл бұрын
i just finished this tutorial. that was pretty cool. thanks for the tutorial. it was easy to follow.
@MHTutorials3D
7 жыл бұрын
Good and thank you
@saeidranjbar6925
4 жыл бұрын
Hi Good Day Excuse me i Don't Have a Dynamic Satate in Maya What Should i do to Make? Or Adding it?
@bhagatvirsindhu4869
6 жыл бұрын
Thanks sir, I got my answer to the first question and you gave me answer to my other two questions also.
@MHTutorials3D
6 жыл бұрын
Good
@phoenixgrimm5217
8 жыл бұрын
Thank you for also including the 2016 version, I NEEDED it.
@MHTutorials3D
8 жыл бұрын
+Phoenix Grimm You're welcome
@MrJohandu83400
6 жыл бұрын
Hi Mike, i really enjoy your tutos and wish to get your level one day! Please keep posting, It is fascinating!
@MHTutorials3D
6 жыл бұрын
Thank you Jo !
@SantaAgain77
5 жыл бұрын
Thank You, Mike :-) Workin! )) Was a moment with looking where (???) is "dynamics" in Maya 2018, but brother Leo, down in this list, help to find. It`s a miracle ! :-D ))) Gatta learn. Your vidos is brilliants, mister Hermes !!! Thank You :^))
@MHTutorials3D
5 жыл бұрын
Thank you
@reko6262
7 жыл бұрын
thank u so much , I tried it,it works, it's my first animation ever :)
@MHTutorials3D
7 жыл бұрын
Cool
@abdenourboudjema4140
9 жыл бұрын
aaaah , thank you , I am new to all this animation , I was recomended to this program , and you made it look easy , thanx
@MHTutorials3D
9 жыл бұрын
You are very welcome Nouri !
@A2zankitkumar
2 жыл бұрын
Love your stuff! Big help!
@Zenovarse
8 жыл бұрын
first ever animation I've ever made from watching your video, and 2 years l8er...
@MHTutorials3D
8 жыл бұрын
:-)
@multimediadiploma463
3 жыл бұрын
kzitem.info/news/bejne/lLCQmIlsp5mAoYY Subscribe 👍 MultiMedia modelling February start now tutorial Making please support 2021 ...
@neatutorials
10 жыл бұрын
Thanks for the tutorial. It's helping me transition from C4D to Maya.
@MHTutorials3D
10 жыл бұрын
You are very welcome Courtney. Mike
@albensmaine3057
8 жыл бұрын
excellent sir, thank you very much for that great and complete tutorial! :)
@MHTutorials3D
8 жыл бұрын
+Bens EvilSunShine You are very welcome
@mariatzak3817
3 жыл бұрын
hi mike really understanding content . I would like to ask you , i was wondering which app to download maya or blender ( no money problem ) do you have any recommandation ?? thanks !!
@GavinRemme
9 жыл бұрын
In Maya 2016, I can't find the "dynamics" menu to set the body types and gravity.
@MHTutorials3D
9 жыл бұрын
Gevan32 Hi there, I posted your answer in my blog. Here it is mhtutorialsyoutube.wordpress.com/2015/07/24/q-where-did-the-dynamics-menu-go-in-maya-2016/
@GavinRemme
9 жыл бұрын
Thanks!
@MHTutorials3D
9 жыл бұрын
You're welcome
@gargus6287
9 жыл бұрын
+Mike Hermes hi, I can't find the FX menu on maya 2016, all I have is modeling, rigging, animation and shading. Please help me I'm losing it
@MHTutorials3D
9 жыл бұрын
+Khelil Goucem Do you have 2016 or 2016 Light ? FX should be there
@solutionfb8525
7 жыл бұрын
very important for me to start new with Maya thank so much
@Asad-ew9tl
6 жыл бұрын
Thank you sir very much ... Today this is my very 1st lesson I am happy
@MHTutorials3D
6 жыл бұрын
Good :-)
@Paperaincoat
3 жыл бұрын
Cool! :)
@androiddemand9051
5 жыл бұрын
Exactly what I needed to see first Thanks mann
@jordan3369
3 жыл бұрын
thank you very much for the turorial mike!
@MHTutorials3D
3 жыл бұрын
My pleasure!
@Naeem2460
5 жыл бұрын
Thank you sir very helpful
@w.u.w7588
7 жыл бұрын
loved it really god for beginners
@MHTutorials3D
7 жыл бұрын
That is how it is intended, I am glad you like it :-)
@MMACZ88
9 жыл бұрын
Your tutorials are awesome!!! :-)
@MHTutorials3D
9 жыл бұрын
MMACZ88 Thanks !!!
@otorisamson4253
6 жыл бұрын
Really easy to learn. Thanks
@MHTutorials3D
6 жыл бұрын
Thanks
@mohamedbaleegh8444
Жыл бұрын
you're an amazing!!!
@sekharh.s5318
4 жыл бұрын
thank you brother
@spongebell
7 жыл бұрын
You really dropped the ball on this one
@MHTutorials3D
7 жыл бұрын
Eh OK :-)
@mohittiwari7213
7 жыл бұрын
how did you select the grid?
@kakaniartanddesign9342
8 жыл бұрын
i love this tutorial....very nice thank you so much
@MHTutorials3D
8 жыл бұрын
+mahesh kaka You are very welcome
@user-uq6go3ct9q
Жыл бұрын
Thank you very much
@hahookids5970
8 жыл бұрын
great tutorial, to the point thank you !!!
@MHTutorials3D
8 жыл бұрын
+Hahoo Kids You are very welcome, thank you for watching !
@jobsonchelsea6434
3 жыл бұрын
thank you man
@thedarkwarriorperspective7475
8 жыл бұрын
I just subscribed. Thanks Mike.
@MHTutorials3D
8 жыл бұрын
Thank you !
@adamzlotkowski8357
9 жыл бұрын
Nice video, really helped me :) Thanks
@MHTutorials3D
9 жыл бұрын
You are very welcome Adam
@MK-wm9zi
8 жыл бұрын
Thanks Mikey :D u are the best
@MHTutorials3D
8 жыл бұрын
:-)
@DarkLord-hv2vu
Жыл бұрын
can't find dynamics menu 😭😭
@89virgoleo
10 жыл бұрын
Excellent and simple video .... subscribed
@MHTutorials3D
10 жыл бұрын
Thanks Yazeed !
@sebastiangonzalezmajo1669
7 жыл бұрын
Hey I'm sorry but this is NOT an animation, it's a physics simulation. The name of the video is misleading.
@MHTutorials3D
7 жыл бұрын
Sebastian, an animation is a number of images set in time and sequence to "simulate" movement. In this case driven by dynamics and not by individual keyframes. But I can assure you that this certainly an animation.
@wattage2007
7 жыл бұрын
Sebastián González Majó It's an animated physics simulation. Christ, where do you pedants come from?
@CheeqMan
6 жыл бұрын
4/5 of video this genius creates sсene
@kudumula1293
3 жыл бұрын
can I make Maya tutorials without purchasing software?
@SumeetLokhande01
7 жыл бұрын
thanx so much for helping
@lexxrelaxx2016
3 жыл бұрын
Hey theres no Dynamics on my Maya! Plz help. Edit: I did everything but my dominos and ball keep falling through to ground. how can i stop them.
@lexxrelaxx2016
3 жыл бұрын
when i did passive rigged body for groundi it says on screen : Cached Playback: Cache disabled as the evaluation manager has been disabled. See the Script Editor for details.
@kushalchaudhari587
8 жыл бұрын
Hello i am not to 3d animation. I know little 3d modeling + Texturing + Lighting + Rendering. I dont know Rigging. i can just add bones to model while skinning and adding controls i have no idea and no knowledge. Now i am very very curious to be a 3d Animator in studious. Can you suggest me how shall i move on? Is Rigging important to learn or i can directly move on animation? Please can you guide me how shall i proceed?
@MHTutorials3D
8 жыл бұрын
+Kushal Chaudhari Kushal, please send me an e-mail to mh-tutorials@hotmail.com
@kushalchaudhari587
8 жыл бұрын
Mike Hermes All right i will send an email right now. :D
@MHTutorials3D
8 жыл бұрын
+Kushal Chaudhari Got it
@naws69
5 жыл бұрын
what happend
@eduarddebruyn4841
4 жыл бұрын
We still wanna know what happened...
@3DArtistHCL
7 жыл бұрын
I like your video. it is helpful for me! Thank you so much! but i need Particle in Maya.
@MHTutorials3D
7 жыл бұрын
I did videos on that
@3DArtistHCL
7 жыл бұрын
I am sorry, I found it. Because too many videos .... Thank you so much. 1000000000 Like for you.
@megafaktordiyet
9 жыл бұрын
Thanks, it works.
@MHTutorials3D
9 жыл бұрын
:-) I am glad
@charedits333
3 жыл бұрын
Thank you so much!
@AddictedToEmotions
3 жыл бұрын
It's more simulation than animation, not what I was searching for
@MHTutorials3D
3 жыл бұрын
I did a fully bouncing ball keyframe animation tutorial if that is what you need ?
@AddictedToEmotions
3 жыл бұрын
@@MHTutorials3D yeah would be better, I'll check then, thanks! :)
@lamahasan69
6 жыл бұрын
thank you so much i hope for you all the best
@MHTutorials3D
6 жыл бұрын
Thanks Jana
@pandarzzz
6 жыл бұрын
Thank you for sharing this video! I hope you are well :)
@MHTutorials3D
6 жыл бұрын
I am, thank you for asking !
@mayurgamre1494
9 жыл бұрын
nice
@jesstv888
9 жыл бұрын
very helpful tutorial thanks
@MHTutorials3D
9 жыл бұрын
You are very welcome
@jesstv888
9 жыл бұрын
Mike Hermes hope to see more tutorial from your channel i learned a lot watching your vids thanks again :)
@MHTutorials3D
9 жыл бұрын
Jessmer Abing There will be a lot more
@jesstv888
9 жыл бұрын
Mike Hermes i will look forward to that
@tejapannasa8894
7 жыл бұрын
sir could u please model a low polygon boiler in 3 -D maya
@jamesodom4980
9 жыл бұрын
I just purchased a monthly Full Maya 2016 subscription, and I do not have the Dynamics option. I have searched all over the internet with no help. I just paid $225 to upgrade from Maya LT and I still don't have the Dynamics Option. Please tell me what I need to do asap.
@alinaqvi3206
8 жыл бұрын
+James Odom I know i'm a year late but this might help others, the FX menu has replaced the dynamics menu
@ghosternz6109
7 жыл бұрын
lol , go get CRACKED one
@nothingoutoftheordinary6860
6 жыл бұрын
got cracked one.
@eyadabdelfatah3506
6 жыл бұрын
+nothing out of the ordinary btw in the cracked version the install stucks at half (1 of 4) any idea ?
@user-bq1bv3vc4y
6 жыл бұрын
WHERE MY BOI WHERE
@jahangirakbar4524
7 жыл бұрын
thank you for your Tutorial. this is very Easy! I use Blender it can also done with Blender 3D very Easily with Same Steps..
@MHTutorials3D
7 жыл бұрын
Good
@2PACBRB2014
4 жыл бұрын
@@MHTutorials3D cant find the dynamics in the dropdown to the left on maya 2019
@2PACBRB2014
4 жыл бұрын
and also the blocks are going throught the floor
@twodragons1235
8 жыл бұрын
awsome tutorial!
@MHTutorials3D
8 жыл бұрын
Thanks
@mohittiwari7213
7 жыл бұрын
cool i like your videos keep uploading..........
@BlueDragonMusicPromotions
9 жыл бұрын
this is great ive been using your tutorials for awhile and i wanna ask if its possible to make an animation in sync with a music track? for example when a beat drops a character punches or something
@MHTutorials3D
9 жыл бұрын
BlueDragon™ EDM Promotions Hi there, problem is that I don't do characters. And typically music is written to match movement ( not always ) Mike
@mahinaboobakar1284
9 жыл бұрын
good, very useful
@salehomar5887
6 жыл бұрын
whats the minimum requirements to run this program, i have a 2014 MacBook pro, would i have to get a desktop and if so what would be the minimum requirements to be able to run this smoothly, thanks in advance.
@kaylinzapara9938
9 жыл бұрын
Hello you animation really help me the only thing i couldn't get to fall right where my domeos they are slipping apart while falling. how do i stop that?!
@MHTutorials3D
9 жыл бұрын
Hi Kaylin, The setup is very basic and you shouldn't have this problem if you have the same settings. A few questions : 1. Do you have approx the same number of dominos ? 2. Is the spacing between the dominos not too big ? 3. Did you use the standard Lambert material ? Please let me know if this helps. Regards, Mike
@zakariatoubi8197
7 жыл бұрын
Hey Boss, where is the link of your good book?
@summitstudio2518
4 жыл бұрын
just wondering, is this using maya bullet?
@MHTutorials3D
4 жыл бұрын
Not in this video, no. I have done other videos using Bullet
@stephensilvers3845
8 жыл бұрын
Do you have a video on how to animate the objects to move forward.
@MHTutorials3D
8 жыл бұрын
+Stephen Silvers Stephne, Do you mean like the ball rolling towards the dominos instead of falling on them ? Check this kzitem.info/news/bejne/moOdrWupepVqnXY and this kzitem.info/news/bejne/wK-HyoduaXVigY4
@nade1231
6 жыл бұрын
Why he didn't put just zero values, to x-y-z- in the menu in upper right corner instead, manual translating of the object ?
@stormandchaos
7 жыл бұрын
Hello, I have seen your video and it is great, it helped a lot! However can you explain me how to export that thing? I watched couple of other tutorials but it just doesn't work at all. I have 200 frames and it is bascially a charcater and a camera spinning around it. How can I export it? Also do you have any idea why do I get a blue screen once I try to render an image with mental ray? Thank you so much beforehand!
@MHTutorials3D
7 жыл бұрын
You reed to batch render you animation ( 200 frames, 1 by one ) and then stitch them together into a video. Check my tutorials on batch rendering
@marianocabaut7320
9 жыл бұрын
great, usseful!
@MHTutorials3D
9 жыл бұрын
Mariano Cabot Thanks
@salmane508
6 жыл бұрын
thinks for this video
@MHTutorials3D
6 жыл бұрын
Very welcome
@shubhampatel4903
6 жыл бұрын
Thanks
@MHTutorials3D
6 жыл бұрын
Thank you
@anolipatel2370
8 жыл бұрын
Sir, I did the same thing you showed in the video but still giving problem...that ball falls but those cube just shakes they dont slide as in your video..only my half cubes shake n remaining half dont react also..they act like a wall...what must be missing??its not even grouped together
@MHTutorials3D
8 жыл бұрын
+anoli patel When you click on ons brick are multiple selected ? It sound like they are combined
@AlinaKundukova007
5 жыл бұрын
Thank you very much! But my animation is too quick - how to made it slower? Where is regulation of speed of object?
@MHTutorials3D
5 жыл бұрын
24 frames per second
@agnibhasen7625
8 жыл бұрын
Hey! Thanks for this tutorial!! I am ew to Maya and this helped me a lot. After his I am going to bounce the ball using the graph editors! Please could you make a tutorial for that too?? Thanks again! :)
@MHTutorials3D
8 жыл бұрын
+Agnibha Sen I have made a lot of animations ( including the graph editor ) Check them out
@agnibhasen7625
8 жыл бұрын
+Mike Hermes Okay!! Cool, will do it. Thank you!
@donatesmile202
7 жыл бұрын
Hello Mike Sir, Hope u r Doing Well . Sir if those people who wants to make a carrier in Visual Effects industry , Maya is necessary ?
@MHTutorials3D
7 жыл бұрын
No not really
@Aychux
4 жыл бұрын
Hello! Can these same principles be applied if I want to animate vertical blinds to be pulled together? Thanks!
@MHTutorials3D
4 жыл бұрын
No, that involves very different dynamics as they start to get closer to each other as they reach the top
@KhalifahAnimation122
6 жыл бұрын
Hey Mike can you teach us how to use arnold?
@HeyHiJenny
9 жыл бұрын
Thank you!
@MHTutorials3D
9 жыл бұрын
Jennifer Angie You are very welcome Jennifer
@nathankirui9443
7 жыл бұрын
hey,my polygon sphere cannot hit the bricks.....just shows the sphere object falln behind the brick..how can i make it fall on the brick.
@MHTutorials3D
7 жыл бұрын
Position the ball above the bricks, not behind
@nathankirui9443
7 жыл бұрын
thanks ..got it
@AJV8BALLER
9 жыл бұрын
How do I add frames to Maya? I noticed that you have four additional boxes to add time whereas mine does not. I am running Maya 2014 and I would love to know how to add more frames.
@MHTutorials3D
9 жыл бұрын
Aaron Vincent Hi Aaron, Do you mean animation frames ? Mike
@youngclique9670
6 жыл бұрын
Use shift D after one ctrl D
@bhagatvirsindhu4869
6 жыл бұрын
Sir I have 3 more problems that I hope you will solve:- 1) I can't rotate the view by holding the mouse and dragging it and I have to rotate the top right cube but I want to do it by holding and dragging method. Please tell me how to do so. 2) When I select any polygon to make, it automatically appears in the centre of the stage but I want to switch it to the dragging method. Please tell me what to do. 3) Please tell me how to switch the views. I would be very grateful to you
@MHTutorials3D
6 жыл бұрын
1. Not sure what you mean 2. Go to create - polygon primitives and turn on Interactive creation 3. Hit the spacebar and select the required window
@bhagatvirsindhu4869
6 жыл бұрын
Please tell me how to rotate the view
@sauravbasu_98
2 жыл бұрын
I have istall May 2022. When Isave any file then show ............. "# Error: UnicodeDecodeError: file C:/Program Files/Autodesk/Maya2022\Python37\lib\encodings\cp1252.py line 23: 'charmap' codec can't decode byte 0x8f in position 129: character maps to " please sir help me......................................
@JG16riffin
7 жыл бұрын
I like it :)
@MHTutorials3D
7 жыл бұрын
Thank you
@Director2nyifx
7 жыл бұрын
iwant to know more abaut maya
@MHTutorials3D
7 жыл бұрын
I have 600+ videos to watch
@Director2nyifx
7 жыл бұрын
okey master help me
@creannerobbins7582
3 жыл бұрын
I really wanna get a job with star stable and my dad always told me I was destined to be an animator. But, I'm too poor for school and I also have babies now and life is hrd so I'm hoping I can get this down without school and still get my dream job xD
@TheZebbga
3 жыл бұрын
Good luck man, hope it all goes well.
@harindra647
3 жыл бұрын
I can't open maya 2020 animation files in 2016 version only it's opening bones didn't open full cherecter plzz tell me how to solve this problem
@MHTutorials3D
3 жыл бұрын
You can't open Maya 2020 files in Maya 2016. It is not backwards compatible
@webstertutorials7798
7 жыл бұрын
nice video bro
@yuicorns7638
3 жыл бұрын
Fun Fact: This video was uploaded on my 6 th Birthday lol 😆😂🤣!!!
@eyewishwalrus
8 жыл бұрын
when i do this my one plays so fast cpmared to yours, why is that?
@MHTutorials3D
8 жыл бұрын
Number of frames in the animation. Every 30 frames is one second
@vital9644
4 жыл бұрын
Increase your frame rate..uptill 200. In last what he done like that .
@bearbones7913
4 жыл бұрын
Kinda curious. How goes your progress with maya?
@profesorpug5551
7 жыл бұрын
Perfect.
@MHTutorials3D
7 жыл бұрын
Thank you Profesor
@haikalhaz1851
6 жыл бұрын
Hi, how do you make the objects using the drag function, idk how to do that
@ThePina295
9 жыл бұрын
I don't have the option on Rigid bodies...from particles to cache is what i don't have. I'm using 2015 Maya...help?
@ThePina295
9 жыл бұрын
oooo..sorry, now i see why, I had it on polygons not dynamics =]
Пікірлер: 485