so far this is the best video on this machine that I've found
@pernstar
6 ай бұрын
Love to read that!
@matthew1192
2 ай бұрын
Great video
@2015_Rubicnn
Жыл бұрын
I just ordered the 988/680 combo. Can't wait to try them out.
@FarruhSatishev
Жыл бұрын
Great review Tom! I'm considering buying one later this year
@pernstar
Жыл бұрын
Thx man!
@samueltractorton2088
7 ай бұрын
Kickass, I want one, thanks for the demo.
@pernstar
7 ай бұрын
Any time!
@NickSabella
3 ай бұрын
Great video. Cant wait for mine to come in!
@pernstar
3 ай бұрын
Thx man!
@racer7xx
Жыл бұрын
Appreciate this video, man! Thank you for the review!
@pernstar
Жыл бұрын
Appreciate the comment!
@BerryMK7
Жыл бұрын
Great video, how is that compressor holding up with the tire machine? Also you should make a video in the future regarding reverse mount/using the disk etc.
@pernstar
Жыл бұрын
Had no issues with the compressor. Sure, it runs quite a bit, but it never has a problem keeping it over 120 psi. And yeah, if there's enough interest, i could.
@mrmotofy
Жыл бұрын
The air fitting on the main regulator can be unscrewed and tape up a regular 1/4" fitting good and screws right in no trouble. Works fine and holds air for hours. I suggest adding a street elbow, angled down then your hose fitting to that. Otherwise the hose sticks way out the rear. I also added a hose whip to main regulator instead so it's out in the open and easy access(connected when using). I added a quarter turn valve on right before the fitting so machine can be closed off and disconnected without loosing all the air, in case hose is needed.
@pernstar
Жыл бұрын
That's smart. I "bandaided" it using the barb method and was going to buy the matching, Asian chuck... but it keeps working. So I keep running it as is. Haha
@mrmotofy
Жыл бұрын
@@pernstar I'm not denying I haven't done it in the past
@PrinceNoxMunyama
11 ай бұрын
I have a new 950 what type of oil should I use
@darrenmetal3338
7 ай бұрын
Those helpers are coming in really handy. Some tires are a pain....
@pernstar
7 ай бұрын
Oh, no doubt.
@mrmotofy
Жыл бұрын
The 960 is just the 950 changer with the extra arm attachment, I believe it's the 300
@drifterwannab
4 ай бұрын
Seating those Acceleras is a pain lol. But I do love the price on them for the grip they offer
@patm95
8 ай бұрын
Is that 21 gallon compressor running it? Do you feel it’s big enough?
@pernstar
8 ай бұрын
It works flawlessly, but what uses the most air, is the bead breaker. So if you mount daily driver grade all seasons etc, where they pop off easy as pie, you might be able to mount one tire without the compressor kicking on. If you mount tires like mine, the compressor will be almost continuously be on while swapping. But it never falls behind.
@ss454gm
6 ай бұрын
What’s the biggest rim you done so far? I just ordered this combo and it says up to 24s but I do have factory set of 20s and 22s I’ll have to use it on
@pernstar
6 ай бұрын
Diameter will be fine I'm sure. I have done 19s. The bigger constraint is width. 11" wide with 305s is doable, but not fun. I'll have a follow up with my mods to the machine to fix this.
@tenehaglendening9246
8 ай бұрын
With Amazon free shipping does that include getting off truck? Thanks in advance
@pernstar
8 ай бұрын
Thats a question for the seller. I wasn't charged for lift gate service, but that doesn't mean it's always gonna be that way.
@tenehaglendening9246
8 ай бұрын
@@pernstar thanks
@codycarder6318
Жыл бұрын
Can you link the air fitting you ended up having to use?
@pernstar
Жыл бұрын
Well, i never ended up buying the matching chuck. I just used the asian fitting as if it were a barb fitting. Meaning, i found the size air hose that was a tight press fit and put a clamp on it... Hack? Yes. Works tho and was "free".
@codycarder6318
Жыл бұрын
@@pernstar oh ok I’ll probably do the same. Could the section where the fitting screws in be tapped for a standard hobo freight one?
@pernstar
Жыл бұрын
I doubt it. The proper fittings can be found online. I forgot the name. Like g23 or something. I just didn't want to wait for them to ship. Lol
@mrmotofy
Жыл бұрын
Just screw in tight a taped 1/4" fitting. It's fine and holds air for hours
@RyanDoesAll
Жыл бұрын
Wish my overpriced red machine with a crap on badge had helper arms! I could trade it in and be better off with this model. Thanks PS.
@pernstar
Жыл бұрын
There are other models with even more arms. Not even sure what i would use all those for, but the primary helper arms is so nice to keep the tire in the drop center.
@AsphaltCowboyz
Жыл бұрын
It's so hard to hear you m8
@pernstar
Жыл бұрын
really? Dang. I checked the levels with my headphones and seemed fine.
@RyanDoesAll
Жыл бұрын
Not at all. Gotta check your audio man.
@pernstar
Жыл бұрын
That's a bit of a relief. I know that YT messed up the upload on this tho. Told me it was done, published and then: whoops, HD takes longer than expected. Wonder if the audio was meh whilst sd or something.
Пікірлер: 41