Thank you for this awesome video. Well explained and informative. Please keep making such videos for the Cx9 Subscribed!
@davidparker5392
6 ай бұрын
Great video. At the last to take it out of service mode you say press down the brake pedal and then pull the park brake and click on and off 4 times. My car I had to press the gas pedal all the way down to take it out of service mode
@johnvitz310
4 ай бұрын
Press down the gas pedal
@jerrybondoc9328
Жыл бұрын
Nicely done filming the procedure! Quality work! Many thanks!
@kdomster9141
Жыл бұрын
Great work and video , keep em coming . I will send it to my Mazda buddies...
@CARDIAXPLAYS
Жыл бұрын
Thanks you and thanks for the support.
@shoaibsheikh477
5 ай бұрын
Hi where your shop is located. ? can I bring my mazda also as well and how much will you charge
@Mike-hr6jz
2 ай бұрын
Very good very well explained and shown how camera angles good so I could see what you were doing exactly the good work
@amo757
9 ай бұрын
Excellent video; thank you.
@TavosMr
Жыл бұрын
Interesting videos, I have a 2022 CX5 and I appreciate the information you share. Also I subscribed to your channel 👍
@CARDIAXPLAYS
Жыл бұрын
Thank you for the support.
@jaybrayboy8449
Жыл бұрын
Outstanding video I am A true fan now thanx🔥🔥💯💯💯💯👍🏾👍🏾👍🏾👍🏾
@CARDIAXPLAYS
Жыл бұрын
Thank you very much Sir
@Fremen02
8 ай бұрын
Nice video. Very well done I do wish you'd reply to the comments asking what bolt size for that little bolt that helps remove the rotor, but i'm sure we can find that out somewhere else. Also for anyone doing this, when you get replacement clips on a non OEM set, make sure they compare exactly to the old ones in size. I recently had some Duralast Gold clips that came with the pads for my Honda CRV and the clips were very close but slightly different in overall width and they kept scraping the rotor! Definitely will compare them every time I change clips.
@tjtrust3411
7 ай бұрын
Thank you for the great video!
@joshrichey8154
4 ай бұрын
Thank you!!! You saved me from many mistakes
@PapaGleb
Жыл бұрын
Really great video, everything is clear and detailed. Super great quality. Sub'd, liked and commented :)
@TulaneEddieIII
11 ай бұрын
Wonderful video. I’m game. Do you know that bolt size for pulling off the rotors? I want to get one. Thank you, Ed
@TommyG11814
Жыл бұрын
Great informative videos nice job.
@sgtkurry
9 ай бұрын
What size is that bolt that you use to separate the rotors?
@lylebates6781
25 күн бұрын
Excellent video but in the end you said to compress brake pedal to take out of service mode which doesn't work. I noticed your foot on gas pedal, tried that and worked right away
@lawrencechang3547
Жыл бұрын
Thanks for the great informative video! By far it has more details than the DIY ones I've seen so far. I have just subscribed to the channel as I have a late model Mazda3 and likely will leverage your videos to do some maintenance. Just one question tho, I didn't see you lube the retaining clips rail and the pads' contact points, is it not required on these Mazda's? I'll be doing my rear brake replacement soon so any reply is appreciated.
@PapaGleb
Жыл бұрын
Within the first 2 min of the video you have shown that you clearly know what you are doing. Very well-made video. Question, do I need to put the veh in "brake service" mode if I am servicing the front brakes?
@mpulido102
6 ай бұрын
Thanks! U saved me money.
@thegeargeekster6128
8 ай бұрын
That was awesome Thanks
@M9_Prime
Жыл бұрын
I have a 2016 CX5 and have used this service more each time I do the brakes. Now I added a 2023 CX5 and am wondering if this s method still works. Also any chance for a video fixing the power seat? I know it's a common problem for them to make noise going back and forth which is a problem have but all the videos I've found aren't great. Would love to fix it myself and save some cash.
@trevorh6356
Ай бұрын
Gas pedal and button 3 times to take out of service mode while lifting ebrake button
@Byrd819
Жыл бұрын
Same procedure to put brakes into “service mode” on a 2018 cx5 touring?
@CARDIAXPLAYS
Жыл бұрын
Yes Sir.
@Byrd819
Жыл бұрын
@@CARDIAXPLAYS Thanks. Looking forward to more of your diy/how to videos.
@pabloruiz766
4 ай бұрын
Thanks for the good video! Question, do you need to bleed the lines after putting it all back together to normal? I test drove mine but the breaks feel pretty soft, not as firm as they were when I started…
@dylangunzel9643
3 ай бұрын
Personally, I always put a light amount of grease on the back of the pad, to prevent any sticking/rusting of the piston to the back of the pad. I don't know if it truly makes a difference, my grandpa taught me that way, so that is the way I do it.
@ECACE72
3 ай бұрын
For anyone wondering the bolt size to pull off the rotor, it's an M8-1.25
@BrianWinebrenner-ny5hs
4 ай бұрын
Great video, I see car had 75000 miles. Is that the 1st time rear rotors were replaced since car was new? thanks
@VinnyVarious
Жыл бұрын
Thanks bro ❤
@kdomster9141
Жыл бұрын
Can you post the same for the front pads/rotor replacement on 2019+ CX30 and Mazda3 assuming those are the same ...
@CARDIAXPLAYS
Жыл бұрын
Its pretty much the same process for a Mazda3 and CX-30 of the same years.
@M9_Prime
Жыл бұрын
It's same process for the front but you don't need to worry about the parking brake so technically easier.
@MsHreid
Жыл бұрын
Am trying to get a brake caliper replaced for my cx9 grand touring 2016 ,do I of to get from the dealer?
@CARDIAXPLAYS
Жыл бұрын
It depends. Is it for the rear or for the front? I would say that you can get a front caliper from the auto part store but the rear I would get from the dealer. The rear caliper just has a lot more moving parts internally than the front calipers do to the electronic parking brake actuator.
@shupedogg1020
4 ай бұрын
What size is the bolt you can use to remove the rotor?
@blknblu8303
Жыл бұрын
You did not put grease on the abutment clips. The clips should get a little grease as well as the ears of the brake pads. All sliding parts should have a little grease.
@CARDIAXPLAYS
Жыл бұрын
Your right. The reason I did not put grease in that area is because of the area the vehicle is in. I live kind of in a desert area where there's tons of sand and dust storms. the dust is like a magnet to that grease. If the vehicle was in any other place I would have applied grease in that area.
@Squad-pl7oo
Жыл бұрын
Did you clean your new rotor with brake cleaner to remove the grease
@CARDIAXPLAYS
Жыл бұрын
I actually did. you can actually see the brake cleaner drying up as I'm installing it.
@eduardovelarde5591
10 ай бұрын
How come you didn’t bleed the caliper when you were done ?
@PapaGleb
Жыл бұрын
I have a 2022 CX-9 15k miles and hear a clicking noise in the front when I change directions. Asked a few mechanics and got some weird stories. I believe it is the pad hardware but not sure if should I replace the hardware or just grease the current ones.
@Lexlugr
Жыл бұрын
There is an inherent issue on CX-9s where the pads shift on the calipers, like there is some slack when you change directions. Mazda issued new hardware and there is a TSB somewhere calling for greasing contact points and backing plate, but it's not a "true" fix in my opinion.... I'll look for it. I recommend that if you're under warranty, take it in to get looked at and specifically cite the TSB. Edit:, found one, but doesn't include your 2020. Fix is the same static.nhtsa.gov/odi/tsbs/2020/MC-10173099-0001.pdf
@imbowser
Жыл бұрын
do you have to torque the bolts?
@alexislanning9757
7 ай бұрын
What happens if u forgot to put service mode on
@slapskate
5 ай бұрын
Oh you really did it now didn't you! 🫣
@jrh8302
Ай бұрын
Supposedly that permatex purple dries out of you put it in the sliding pins and they get stuck there. Better off using actual brake grease.
@evantriantafyllou6056
11 ай бұрын
You might want to edit your taking car out of service mode You say you press your brake pedal to the floor but you are pressing the gas pedal down if i am not mistaken Great video thou
@dustyb9359
10 ай бұрын
He said accelerator pedal
@slapskate
5 ай бұрын
@@dustyb9359He said accelerator at the beginning of vid but he says brake at the end. He meant accelerator I'm assuming 🤔
Пікірлер: 55