Looks really cool, did you have to cut into the subframe or the firewall like for the inline 4 swaps or was it a better fit from the getgo?
@osscar_vld
3 жыл бұрын
I knocked a hammer under the frame number and everything turned out)))
@craiglawson6103
3 жыл бұрын
Good job I wanna see more
@craiglawson6103
3 жыл бұрын
Twin GT35 would be slick.
@osscar_vld
3 жыл бұрын
I think so too)))
@osscar_vld
3 жыл бұрын
Now we going to swap j35a5 in bmw5 e34 with t3/t4 turbo charger)))
@craiglawson6103
3 жыл бұрын
@@osscar_vld GT35 would be a better choice.
@grimestnikoff7096
6 жыл бұрын
Круто👍 а как так у вас впуск вдругую сторону смотрит? Просто перевернули или каг?
@osscar_vld
6 жыл бұрын
Ну там все по заводу можно перевернуть, канал егра надо глушить только
@artemartemov1242
2 жыл бұрын
Можно ваши контакты? Добавьте в описание пожалуйста.
@siemens_c65
4 жыл бұрын
В каком городе находитесь? Занимаетесь свапами? Интересует такой же
@osscar_vld
4 жыл бұрын
Находимся во Владикавказе, да занимаемся
@streetracingsuriname7980
2 жыл бұрын
Do you have info on the Adapter plate you used? Im looking forward to doing this swap too.
@osscar_vld
2 жыл бұрын
I took rear panel from rx8 engine, and made adapter plate for engine
@hoodlahits
3 жыл бұрын
Those people who don’t know a thing about cars and they look at the title: 👁 👄 👁
@osscar_vld
3 жыл бұрын
)
@CRCCREATIONS
6 жыл бұрын
Is this a rx8 transmission? if so where can i find the adapter plate
@osscar_vld
6 жыл бұрын
I made it myself)
@ChickenJoe50
2 жыл бұрын
Is there a way you can send the pics for the adapter for the flywheel? And the setup for the crank
@osscar_vld
2 жыл бұрын
U can watch mine other video about j25 swap, where I show that adapter
@samparsons4656
3 жыл бұрын
Any chance of some info on this swap ?
@osscar_vld
3 жыл бұрын
What sort info do you need?)
@РусланМакоев-п7ь
8 жыл бұрын
а где описание? что во что свапали?
@osscar_vld
8 жыл бұрын
Руслан Макоев внимательно читайте название и описание😉
@quinlankeene8896
3 жыл бұрын
Is the stock rx8 transmission in the factory location? PPF, driveshaft and shifter all stock?
@osscar_vld
3 жыл бұрын
Yes!
@quinlankeene8896
3 жыл бұрын
Why did you decide to build an oil pan instead of notching the subframe?
@osscar_vld
3 жыл бұрын
@@quinlankeene8896 I think the subframe is must be strong like factory designed
@quinlankeene8896
3 жыл бұрын
@@osscar_vld makes sense, got the job done. Have any pics you can send me? I'd really appreciate it. Just trying to get a better idea on the fitment, firewall ect. I've done an LS G35 and K24 miata in the past so I got the means to do the swap.
@osscar_vld
3 жыл бұрын
@@quinlankeene8896 yes, I can) thank you)
@MsXLukasX
7 жыл бұрын
hello what clutch Do You used ?
@osscar_vld
7 жыл бұрын
MsXLukasX on that car we used mazda rx8 automatic transmission, but we build Mazda with 2,5 liters honda engine with OEM mazda rx8 clutch.
@gustavomedina912
2 жыл бұрын
how did you do the intake manifold flip
@osscar_vld
2 жыл бұрын
I just swapped the lower collectors)))
@osscar_vld
2 жыл бұрын
После копирования этого контента откройте приложение TeraBox, чтобы просмотреть ссылку Ссылка:terabox.com/s/1PM23ILu4jNRy-HusO5SkoQ and after you need swap kit to manual from eBay www.ebay.com/itm/Clutchmax-Mazda-RX-7-Turbo-RX-8-FC-Fd-SE3P-/132764796943?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 some things like that)
@gustavomedina912
2 жыл бұрын
@@osscar_vld did you custom built the coolant lines in the back also
@osscar_vld
2 жыл бұрын
@@gustavomedina912 оf course yes!
@pablopapelitobonilla
Жыл бұрын
What ecu use?
@osscar_vld
Жыл бұрын
For engine Hondas ecu, and Mazdas for AT and other sistem. But for engine need chiptuning or other ecu. Because, if u want max acceleration, AT shifts gear up on 7100-7300, the engine has a maximum rpm limit of 7000, as long I remember...)
@billcarson4525
5 жыл бұрын
You still have the car
@osscar_vld
5 жыл бұрын
The car have my friend
@dontaianderson8282
5 жыл бұрын
Can you share with me the build process??
@osscar_vld
5 жыл бұрын
I think so)
@dontaianderson8282
5 жыл бұрын
How did you mount it to the transmission
@osscar_vld
5 жыл бұрын
@@dontaianderson8282 I took rear cover from Mazda oem engine, made adapted plate and fastened them to each other. Crank need adapter too.
@dontaianderson8282
5 жыл бұрын
What do you mean crank need adapter too??
@osscar_vld
5 жыл бұрын
@@dontaianderson8282I'll try to send some pictures to you
Пікірлер: 55