Mazda seems to go out of their way to make routine maintenance tasks hard af wtf
@Tmoneygarage
5 жыл бұрын
Hey man, where did you get the tow hook?
@mikef058
5 жыл бұрын
I know this is a bit old but when replacing the PCV valve, does the black box have to be replaced? Does the black box have a gasket? What does the black box do?
@mikef058
5 жыл бұрын
@@RoadRoyals thanks for your quick reply. And the black box does not have a gasket or anything like that around it?
@mikef058
5 жыл бұрын
@@RoadRoyals got ya. Thanks for the info man. I do enjoy your videos, whenever I have time. Hope you do more videos of the black MS6 as well.
@martyahad6391
4 жыл бұрын
@@RoadRoyals The 'black box' is called an oil separator. Got that from the local Mazda dealer today when I picked up the new PCV (Mazda part #L325-13-890A, $36.26 Canada). There is a gasket shown as 10-23Y (not a Mazda part #) for the 'black box'. If I can't attach the drawing it is called 'Model/Year: Mazda 3, Section: 1370BB Emission Control System (2300CC). The circular clip that holds the PCV to the 'black box' is called a Retainer (Mazda part #LF01-10-509, $10.49 Canada). I think I will order the gasket and the retainer before I start this job.
@martyahad6391
4 жыл бұрын
Update Nov 8, 2019: The gasket for the ;black box' is a Mazda part #LF01-10-2C8, $17.45 Canada.
@PosiXMosh
3 жыл бұрын
@@martyahad6391 thanks for those numbaz.
@keithciaccio7987
Жыл бұрын
I am really starting to hate this engine.
@RoadRoyals
Жыл бұрын
That's too bad, it's been nothing but good to me!
@Dyl_Cam
8 ай бұрын
I love my speed but the circle jerk of "it's easy to mod and make power" is utter bs lol. You gotta spend a bit to not fuck it up
@keithciaccio7987
8 ай бұрын
@@RoadRoyals wait, once you have to fix shit it is one thing after another and none of it is easy.
@MUSA-o5k
3 ай бұрын
@@Dyl_Camideally you can make 340hp and 390lbft with £800 of mods, just need decat intake hpfp fmic and a tune
@Dyl_Cam
Ай бұрын
@@MUSA-o5kYea I realized you don't need that much later lol I was super mad at the car when I commented that 😂
@spoada
6 жыл бұрын
Turbo journal bearing. You can take off your inlet to get to the turbo. You will see oil and be able to move the turbine slightly side to side but NOT forward and backward. When forward oil burns and it smokes. Let off the gas and it leaks. The pcv goes and takes the bearing with it.
@forrestgrow1435
5 жыл бұрын
I replaced that braided coolant line without removing the manifold and then realized my PCV hose had a rip in it :(
@ncvman
5 жыл бұрын
Hi. Did you end up putting pcv back in from the bottom or by taking manifold off? Would this video apply to 2.3 Cx-7?
@ncvman
4 жыл бұрын
RoadRoyals I tried to do it today. Took me an hour just to get the dip stick out. F this. I will try from manifold removal or just let dealer do it. They estimate two hours. Peanuts for me.
@anaestereo810
2 жыл бұрын
A like for innovation. Subd for perseverance.
@benjipelayo9366
5 жыл бұрын
Sorry this is pretty old but did you ever find what was the problem with all that oil I got the same issue and I’m pretty sure my pcv valve is also messed up could that be the case?
@danehamilton8831
9 ай бұрын
Take the dipstick tube out its one 8mm bolt, bit more room.
@MB-sp6sp
5 жыл бұрын
Did you replace the plastic cover seal as well?
@ncvman
4 жыл бұрын
Did you clean the oil separator plastic before putting back? Did you get a new gasket for that or just used existing? Also wondering how much coolant leaked? What do you recommend to do to stop it from coming out? Attach a balloon to the end of it or wine cork? Separator - Mazda (L3K9-13-570) Separator Gasket - Mazda (LF01-10-2C8)
@ncvman
4 жыл бұрын
RoadRoyals thank you. Any special tools required? I will pick up a gallon of coolant. Now that you know what you are doing how long would it take you?
@bootsarmstrong8421
3 жыл бұрын
I had '91 Mazda Protégé with the pcv on the valve cover. Now, with my 2008 Mazda 3, the pcv is buried, just like on your video. Why??????
@alangonzalez5024
3 жыл бұрын
Working on the fucking speed AGAIN xD
@TheGuruStud
4 жыл бұрын
Delete PCV on every car, ESPECIALLY if DI.
@tyronenur2373
4 жыл бұрын
Won’t pass emissions
@followme8238
7 жыл бұрын
Thanks. a million for showing how to get that plastic ring off. As far as the bottom up approach...it's good to know the alternative, but...this really looks tough too. And messy. I think I'll go with the topside repair. Either way it looks like I'm in for some busted knuckles.
@RoadRoyals
Жыл бұрын
Glad i could help!
@numinous4789
5 жыл бұрын
Have any bad PCV symptoms? If so, what exactly?
@JasonT._3568
3 жыл бұрын
Excessive oil consumption ,possible lean codes (stuck open) blown seals (stuck closed) that is what I have found so far.
@elit3401
Жыл бұрын
Good video, except for the cursing. This definitely is worth trying instead of intake removal.
@chloeleedow7250
Жыл бұрын
Swearing is mandatory when you're a DIY mechanic lol
@torek997
6 жыл бұрын
Hi, I have a question, you removal this pcv becouse? I have cel P2187 fuel system too lean at idle in my speed6. I changed MAF, purge valve, and this check is still coming... what do you think, pcv removal could be help?
@FernandoGonzalez84
5 жыл бұрын
Did you ever figure it out? I'm getting the same code. I did a smoke test and it looks like it's the EGR valve.
@camrt6070
Жыл бұрын
Thanks ......
@salvadorlara9744
7 жыл бұрын
Hey did your car run rich because of this? Did it fix it?
@salvadorlara9744
7 жыл бұрын
Nah i know that. I'm tuned with BT but I have been been running rich...have no boost leak and I burn oil sometimes..thought it was valve seals but compression is good. Last resort would be this? SO fuckin lost
@stevenwright3214
7 жыл бұрын
Have you guys tried the bnoon, aka jbr restrictor bolt? it's a temporary fix but it really calmed the smoking on my car down and got me through emissions. I bought mine from jbr, definitely worth it until I can afford the new turbo. I also have a similar oil leak from the turbo and bought oil return gaskets but haven't installed them yet. hopefully that's the issue.
@salvadorlara9744
7 жыл бұрын
steven wright nah man I haven't tried that but I figured out my problem and I'm getting a lot of b blowby from my cylinders which could be from a valve stem seal leaking oil
@RAMCO840
7 жыл бұрын
RoadRoyals engine oil leak could be the engine coolant gasket, i bought the updated engine coolant made of metal and copper instead of just buying the gasket and using the cheap factory plastic engine coolant. common problem on mazdas.
@peterlee3825
2 жыл бұрын
Hi can I remove the PCV hose and just install a mini filter on it? Don't want to let the dirty crankcase air into intake system and I believe this is the major source of carbon deposit on valve.
@noahlehman1408
Жыл бұрын
You can remove the hose from the intake and cap it
@VictorGarcia-gy8yv
Жыл бұрын
@@noahlehman1408 dont do that
@noahlehman1408
Жыл бұрын
@@VictorGarcia-gy8yv I meant cap the intake and have it vent to the ground. Not the best for the earth but keeps engine from getting a lot of carbon buildup
@VictorGarcia-gy8yv
Жыл бұрын
@@noahlehman1408 my bad I thought you said to cap the hose coming from the PCV, yeah it's not ideal but planet earth is not going to pay your mechanic bills either
@noahlehman1408
Жыл бұрын
@@VictorGarcia-gy8yv yeah should've specified lol
@JuniorMason
8 жыл бұрын
so did it fix the smoking problem?
@SantomPh
5 жыл бұрын
the dubstep in the background is unnecessary
@alfredo4988
2 жыл бұрын
Perhaps it was for the listening enjoyment of RoadRoyals, that alone made it necessary. IMHO
Пікірлер: 53