9 foot? Back to school , one mark is foot and 2 is inches! Lol. Erased it fast as you drew it ! Just giving you shit , really appreciate the help ! Needed this short and sweet video ! ✌
@3hdninja
8 жыл бұрын
So Geometry class did serve a purpose. Thanks again.
@JeepSolid
8 жыл бұрын
+3hdninja Sure did ;)
@mikemichaels1509
6 жыл бұрын
it is actually trigonometry
@bobhorton6974
Жыл бұрын
Great video, very straightforward.
@BroncoSolid
7 жыл бұрын
Suddenly I'm back in geometry class. I guess the question of "when am I ever going to use this" has been answered.
@JeepSolid
7 жыл бұрын
BroncoSolid It's ok, you can have your kids do it for you ;)
@francishabla5445
Жыл бұрын
i like the simplicity. thanks you.
@cattledog5464
3 жыл бұрын
This is so correct. Makes you no longer wonder....just know that many lifted Jeeps you see everyday... have the wrong shock size.
@brianafrojack5215
5 жыл бұрын
If my teacher did examples like this in Math Class I'm pretty sure I would pay way more attention.
@JeepSolid
5 жыл бұрын
Lol.. That's funny! But true
@esikowalski
4 жыл бұрын
Me too !
@jdub1922
2 жыл бұрын
OK but how do you know what size shock?? How do you translate those numbers to actually look for shocks??
@blazydays4x416
2 жыл бұрын
Hi does this calculation work for inverted rear suspension?
@clayton203
3 жыл бұрын
To hard,,Just jack one side up until the tires is about to leave the ground,,measure that side ,,that would b fully extended,,then measure the other side for fully compressed,,without shocks on it of course,,pretty simple I would think,,you just don’t want a shock to bottom out or fully extend,, your measurements would help you there,,
@chupapimunyanyno5853
2 жыл бұрын
Lol what happens if you removed your bump stops… i dont do a lot of flexing so i removed them not really sure why. Should i instAll them and then do the measurements like described in the video?
@bobcat138
3 жыл бұрын
You need a longer brake hose it is under tension when you let suspension hang.
@calebwillhelm2635
5 жыл бұрын
Or just jack the frame up. And when your tires starr to come off the ground messure. But im just a wrench Turner
@casandramcneely6188
4 жыл бұрын
Amen.
@richardgoss5798
4 жыл бұрын
The reason to unbolt the existing shock is to confirm maximum length of travel. The old shock may be preventing maximum travel.
@Brian-vz7xe
4 ай бұрын
I guess this a common size, his dimesions was same that my 1998 4runner has.
@cristianurrutia2097
6 жыл бұрын
excellent explanation, txs
@JeepSolid
6 жыл бұрын
No problem. Thanks for watching!
@oatz1878
8 жыл бұрын
Awesome! now I can order my shocks without looking like a fool.
@JeepSolid
8 жыл бұрын
+Oatz Haha! That's awesome!
@jeepsblackpowderandlights4305
3 жыл бұрын
Man this is much more complicated then i figured... soo my Jeep Grand Wagoneer, has shocks that extend only 19.9 inchs.. and with the tires on the ground it measures 19 inchs with my new oem height springs and a 2 inch lift.. So my shocks are pretty much max extended already just sitting on the ground. With the shock off and jeep jacked up so the axle flexs down i measured 21 inchs from mount to mount on the shock. This means my Jeep cant even flex on a pot hole with the current shocks. So i found on 2-3 inch lift shocks from bilstein that measure 22.7 length, how much extra length do i need over the 21 i measured ? Is 1.7 inchs extra enough on those 2-3 inch lift shocks ? Im less worried about the bottoming out of a shock than i am the shock not extending enough.
@thebakery3996
2 жыл бұрын
He never explained the math😂 he just said put it in google calculator
@WCxColosus
11 ай бұрын
google did the math for the min size compressed, if you are getting 21 inches from mount to mount that that would be the min size of the shock extended that you would need.
@rayguillen8432
4 жыл бұрын
I had rear shocks installed on my yj and only 2 inches of the rod is exposed at ride height. Is this correct?
@winedave5454
3 жыл бұрын
do you have the link to the google calculator?
@tyronevalentino8475
Жыл бұрын
So I'll be the dummy of the Class but at least I will know wtf I'm doing hopefully. I asked my Mechanic to measure my Jeep for lift and he insisted the Jeep was Stock. It's not. Anyways I had bought 0-1" Fox Shocks 2.0 all around. So now I have the problem of figuring out to get extensions or just get another set of Shocks all around. Ultimately this is a short term for the Long Picture of a new lift so I know exactly what's in the Jeep. So the questions this works for a JKU as well...yes? Matjow7340 w Do you add an inch to the extended length and subtract an inch from the compressed length as a little extra buffer zone insurance from bottoming out and over-extending? Could you elaborate on this and break it down precisely as to what to do there. I'm confused by the answer you gave him. Thanks \ Reply rote:
@dmuller7601
Жыл бұрын
Damn it I knew I should have listened in middle school math class
@MrSandcrab1945
6 жыл бұрын
I'm doing this over and over and still can't make the degree calculation.
@johnstanke8679
6 жыл бұрын
You did not say how much the shock should extend past the lower mount. One inch?
@zero2583
5 жыл бұрын
Shoot for 2" to be safe
@stanpidgurskyjr297
3 жыл бұрын
Why couldn't you just measure the shock compressed and extended..lol
@915fatty
Жыл бұрын
Because that won't always tell you what your suspension is capable of moving to. Your shock could be limiting the suspension movement.
@comoxvalleyoffroad5696
4 жыл бұрын
I’m glad I don’t have leaf springs.....🤔😁
@cuatek1029
6 жыл бұрын
So what exact math did you use to figure out the number
@JeepSolid
6 жыл бұрын
Once I had the measurements, I used a google calculator to figure it
@floatz76
8 жыл бұрын
Are those bilstein 5100s? How do you like them
@JeepSolid
8 жыл бұрын
+Jaybird Foley Yep, Bilstein 5100's. Makes for a nice ride. I like them.
@justindelborrello8196
3 жыл бұрын
@@JeepSolid what size suspension lift do you have on your yj, I want to use 5100 also but can't find shorter shocks
@matjow7340
5 жыл бұрын
Do you add an inch to the extended length and subtract an inch from the compressed length as a little extra buffer zone insurance from bottoming out and over-extending?
@JeepSolid
5 жыл бұрын
Yeah, it's a good idea to add a little at the top and bottom to prevent bottoming out.
@adidas4275
4 жыл бұрын
and they said you would never need to know basic geometry again
@leblanc7275
6 жыл бұрын
Shocks for 6inch lift? I can't math
@cuatek1029
6 жыл бұрын
Can you email me the exact formula please
@JeepSolid
6 жыл бұрын
Jesus Gomez The exact formula I used is linked in the description of the video. The triangle calculator. Hope that helps.
@Wilverine99
6 жыл бұрын
You wrote 9' (feet)
@JeepSolid
6 жыл бұрын
+Wilverine99 It’s got a lot of lift on it. Haha!! Anyway, yeah. Wrote 9” initially, but then on math wrote 9’(but said inches).
Пікірлер: 52