The difference between pipe and tube is not based on whether or not it's threaded. Being that you are a plumber I was shocked when you made the statement. Your chart correctly lists copper and brass pipe ODs, copper is w/o threads and brass is w/ threads. Thank you for the pipe size chart. Tubing is measured using any 2 of the 3 dimensions OD, ID, wall thickness. Peace!
@balkanplumbing
3 жыл бұрын
I did some research and in fact the designation of material as pipe or tubing does NOT in fact have anything to do with whether it is threaded or not as I so stated. So I was mistaken! The designation of a material as pipe or tubing relates to how its diameter is measured (inside diameter or outside diameter). It also related somewhat to its intended use i.e. for structural purposes, for plumbing, etc. Thanks for the comment, it brought to light an old piece of information I received years ago, accepted as a "truth", that in fact was wrong!
@meehanasap
Жыл бұрын
@@balkanplumbing I know this is 2 years too late, but as a layperson, when dealing with brass fitting they are structuraly thicker so you take the measurement from the inside? is that correct?
@DavidBalkan
Жыл бұрын
@@meehanasap I'm not 100% sure what you mean. If you know the material is brass, and you measure the otuside of the pipe, the pipe chart will let you know the pipe size itself.
@meehanasap
Жыл бұрын
@@DavidBalkan Sorry for the confusion. I find pipe dimensions a bit confusing as a layperson. I appreciate your reply.
@sweepphreak
Жыл бұрын
your accent is NEXT LEVEL COOL have you ever done any voice acting or audio narratives ?
@miket728
4 ай бұрын
Very informative and to the point. Thank You.
@balkanplumbing
4 ай бұрын
Thank for your kind words.
@michaelkithcart8481
4 ай бұрын
Exactly what I was looking for. Thank you sir!
@balkanplumbing
4 ай бұрын
Cool. You’re very welcome.
@namewithheld367
2 жыл бұрын
Thank you for the excellent video. Informative and to the point. Also, thanks for the download link for the chart, very helpful.
@balkanplumbing
2 жыл бұрын
I'm glad to help. Sharing knowledge is a pleasure.
@2326TOM
2 жыл бұрын
Thank you. That was so good
@balkanplumbing
2 жыл бұрын
Glad you liked it. Thanks for the kind words.
@cdrobson
3 ай бұрын
there is another pipe that you do not mention and is not identified in your size chart - galvanized. That's what I have and what I measure is 0.840 inches O.D. Is that going to be 3/4" galvanized?
@balkanplumbing
3 ай бұрын
It’s probably 1/2”. Galvanized pipe can come in different wall thicknesses.
@asds92
10 ай бұрын
Thank you VERY much!! You made it so simple that I feel STUPID!! 🙂
@balkanplumbing
10 ай бұрын
Nice! Thank you.
@edsilco2113
2 жыл бұрын
Excelente video. Muy útil !!!
@balkanplumbing
2 жыл бұрын
Thank you!
@vcolet2011
2 жыл бұрын
Thanks
@nyakwarosiagorodgers1056
7 ай бұрын
Thanks for the information.my question is that how can one determine the reasonable size of a copper pipe suitable for supplying gas to ten gass taps in a secondary School laboratory for experiments and practical purposes??
@balkanplumbing
7 ай бұрын
You would need a design professional experienced with sizing that sort of equipment. That would not be me! Sorry about that.
@seaspidermariner1565
2 жыл бұрын
Thanks for sharing knowledge appreciate 🙏
@DavidBalkan
2 жыл бұрын
Glad to be of help! Thanks for your kind words.
@marypettersen6750
3 жыл бұрын
Thank you
@balkanplumbing
3 жыл бұрын
Glad to help.
@bdlou2000
3 жыл бұрын
Perfect video. Thanks so much!
@balkanplumbing
3 жыл бұрын
Thank you for your kind words. If you have any other questions, or need any advice, feel free to reach out.
@bondjovi4595
Жыл бұрын
I don't know the difference between inner and outer diameter. I don't know how to measure a drain plug. I am very damn stupid. Thanks for the helpful video.
@sudorights
Жыл бұрын
You’ll get there
@cimism610
2 жыл бұрын
AWESOME
@CarlosOrtiz-ht6rn
3 жыл бұрын
thank you Sir.
@andrewp2503
2 жыл бұрын
The Chart leads to an "Error Page"
@balkanplumbing
2 жыл бұрын
Thank you for pointing that out! I'll correct it. In the meantime, here's a new link (please confirm it works!): www.balkanplumbing.com/flow-rate-of-water-pressure-gpm/water-pipe-sizing-chart-1/
@Son_of_Aragorn
7 ай бұрын
Does this apply to PVC piping? Thx!
@balkanplumbing
7 ай бұрын
Not at all. PVC would a different wall thickness, therefore different outside dimensions. Good question though!
@Son_of_Aragorn
7 ай бұрын
@@balkanplumbing Thank you! I found out after this one would measure the inside of a PVC pipe to get its true size....not the outside. 🤘💪
@kaijusushi8165
2 жыл бұрын
for people who don't want to buy a special caliper just to measure their pipes?
@balkanplumbing
2 жыл бұрын
You can use a string to measure the outer circumference, they lay the string against a ruler. An inexpensive caliper is far more accurate. They cost less than $20.
@jackpitts5561
10 ай бұрын
you just said 1.9 brass => 1.5” yet the chart in your video says it’s 1 7/8”. Whaaaaauuut?
@balkanplumbing
10 ай бұрын
If the reading on the caliper is slightly different it still equates to giving the working size of the pipe. That is the point.
@kyross12
2 жыл бұрын
Not able to get to size chart. There's a 1011 error access denied
@balkanplumbing
2 жыл бұрын
Sorry about that! The chart is in this post, and can be downloaded: www.balkanplumbing.com/know-pipe-size-plumbing-guide/
@balkanplumbing
2 жыл бұрын
I found the link to the chart as well:www.balkanplumbing.com/flow-rate-of-water-pressure-gpm/water-pipe-sizing-chart-1/
@ncvman
Жыл бұрын
How about pex?
@balkanplumbing
Жыл бұрын
Pex is not legal in my city, so no idea!
@jdkemsley7628
Жыл бұрын
the chart says .975 = 7/8, though it should say .875 = 7/8
@balkanplumbing
Жыл бұрын
Sorry for the late response. You are 110% correct. I will fix it and drop in the correct chart for sharing. Thanks!
@philipdove1705
Жыл бұрын
Every fitting I install leaks and sprays
@balkanplumbing
Жыл бұрын
Bad threads, not tightened enough, or maybe try Teflon tape???
@philipdove1705
Жыл бұрын
@@balkanplumbing well not every pipe I guess I've been using bad combinations of pipes 3 to 4 wraps of teflon
@balkanplumbing
Жыл бұрын
Mismatched pipe materials? That would be a cause.
@philipdove1705
Жыл бұрын
@@balkanplumbing I had 2 leaks yesterday over the hot water heater both were on the flexible braided steel 24" hoses it was dripping at first so then I I tightened it too much and cracked the nut leak had stopped then the next morning it was spraying water all over the room from the tiny crack. And the hot line was leaking. So 45 dollars worth of hoses was a bad idea. Maybe the threads are slightly different
Пікірлер: 54